Corrosion Science and Technology

  • 제21권4호
  • /
  • Pages.258-272
  • /
  • 2022
  • /
  • 1598-6462(pISSN)
  • /
  • 2288-6524(eISSN)
한국부식방식학회 (The Corrosion Science Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

Atmospheric Corrosion Behavior of Weathering Steel Exposed to the Outdoors for 10 Years in Korea

  • Yoo, Y.R. (Materials Research Center for Energy and Clean Technology, School of Materials Science and Engineering, Andong National University) ;
  • Choi, S.H. (Materials Research Center for Energy and Clean Technology, School of Materials Science and Engineering, Andong National University) ;
  • Kim, Y.S. (Materials Research Center for Energy and Clean Technology, School of Materials Science and Engineering, Andong National University)
  • 투고 : 2022.08.24
  • 심사 : 2022.08.30
  • 발행 : 2022.09.02
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Steel structures exposed to the outdoors experienced several types of corrosion, which may reduce their thickness. Since atmospheric corrosion can induce economic losses, it is important to consider the atmospheric corrosion behavior of a variety of metals and alloys. This work performed outdoor exposure tests for 10 years at 14 areas in Korea and calculated the atmospheric corrosion rate of weathering steel. This paper discussed the atmospheric corrosion behavior of weathering steel based on various corrosion factors. The average corrosion rates in coastal, industrial, urban, and rural areas were found to range from (2.83 to 4.23) ㎛/y, (2.99 to 4.23) ㎛/y, (1.72 to 3.14) ㎛/y, and (1.57 to 2.85) ㎛/y respectively. It should be noted that the maximum corrosion rate was about 6.0 times greater than the average corrosion rate. Regardless of the exposure sites, the color differences were increased, but the glossiness was reduced and there was no relationship between the corrosion rate and environmental factors and the glossiness.

키워드

과제정보

This work was supported by the Ministry of Knowledge and Economy, Korea (Contract No.: B0008572). The members of the Corrosion Science Society of Korea supported this work. We thank: Yonsei University (Prof. Yong Soo Park), Inha University (Prof. Woon Suk Hwang), Soonchunhyang University (Prof. Jong Kwon Lee), Korea Maritime & Ocean University (Prof. Ki Jun Kim), Gangwon National University (Prof. Song Hee Kim), Korea Institute of Construction Materials (Dr. Sang Myeong Kim), Korea Gas Corporation (Dr. Duk Soo Won), Korea Aerospace University (Prof. Yo Seung Song), Hongik University (Prof. Heesan Kim), Sungkyunkwan University (Prof. Jung Gu Kim), POSCO (Dr. Jong Sang Kim), RIST (Dr. Sung Nam Kim), Chonnam National University (Prof. Chan Jin Park). We are especially grateful to the late Prof. W. S. Hwang and the late Prof. K. J. Kim. This research was also partly supported by Korea Institute for Advancement of Technology(KIAT) grant funded by the Korea Government(MOTIE)(P0008458, HRD Program for Industrial Innovation, 2022).

참고문헌

  1. T. Kamimura, K. Kashima, K. Sugae, H. Miyuki, T. Kudo, The role of chloride ion on the atmospheric corrosion of steel and corrosion resistance of Sn-bearing steel, Corrosion Science, 62, 34 (2012). Doi: https://doi.org/10.1016/j.corsci.2012.04.049
  2. Z. Dan, I. Muto, N. Hara, Effects of environmental factors on atmospheric corrosion of aluminium and its alloys under constant dew point conditions, Corrosion Science, 57, 22 (2012). Doi: https://doi.org/10.1016/j.corsci.2011.12.038
  3. E. Diler, S. Rioual, B. Lescop, D. Thierry, B. Rouvellou, Chemistry of corrosion products of Zn and MgZn pure phases under atmospheric conditions, Corrosion Science, 65, 178 (2012). Doi: https://doi.org/10.1016/j.corsci.2012.08.014
  4. C. Chiavari, E. Bernardi, C. Martini, F. Passarini, F. Ospitali, L. Robbiola , The atmospheric corrosion of quaternary bronzes: The action of stagnant rain water, Corrosion Science, 52, 3002 (2010). Doi: https://doi.org/10.1016/j.corsci.2010.05.013
  5. B. B. Wang, Z. Y. Wang, W. Han, W. Ke, Atmospheric corrosion of aluminium alloy 2024-T3 exposed to salt lake environment in Western China, Corrosion Science, 59, 63 (2012). Doi: https://doi.org/10.1016/j.corsci.2012.02.015
  6. Z. Wang, J. Liu, L. Wu, R. Han, Y. Sun, Study of the corrosion behavior of weathering steels in atmospheric environments, Corrosion Science, 67, 1 (2013). Doi: https://doi.org/10.1016/j.corsci.2012.09.020
  7. M. Stratmann, H. Streckel, On the atmospheric corrosion of metals which are covered with thin electrolyte layers-II. experimental results, Corrosion Science, 30, 697 (1990). Doi: https://doi.org/10.1016/0010-938x(90)90033-2
  8. T. Tsuru, A. Nishikata, J. Wang, Electrochemical studies on corrosion under a water film, Materials Science and Engineering, A198, 161 (1995). Doi: https://doi.org/10.1016/0921-5093(95)80071-2
  9. S. Syed, Atmospheric corrosion of materials, Emirates Journal for Engineering Research, 11, 1 (2006).
  10. Y. R. Yoo, S. H. Choi, and Y. S. Kim, Atmospheric Corrosion Behavior of Carbon Steel by the Outdoor Exposure Test for 10 Years in Korea, Corrosion Science and Technology, 21, 184 (2022). Doi: https://doi.org/10.14773/cst.2022.21.3.184
  11. ISO 12944-2, Paints and varnishes - corrosion protection of steel structures by protective paint systems, ISO (2017).
  12. Y. S. Kim, H. K. Lim, J. J. Kim, and Y. S. Park, Corrosivity of atmospheres in the Korean peninsula, Corrosion Science and Technology, 10, 109 (2011). Doi: https://doi.org/10.14773/cst.2011.10.4.109
  13. V. Krivy, M. Kubzova, K. Kreislova, V. Urban, Characterization of Corrosion Products on Weathering Steel Bridges Influenced by Chloride Deposition, Metals, 7, 366 (2017). Doi: https://doi.org/10.3390/met7090336
  14. R. W. Revie, Uhlig's Corrosion Handbook, 3rd ed., John Wiley & Sons Inc, New York (2000)
  15. B.R. Meybaum, E.S. Ayllon, Characterization of atmospheric corrosion products on weathering steels, National Association of Corrosion Engineers, 36, 345 (1980). Doi: https://doi.org/10.5006/0010-9312-36.7.345
  16. H. Tamura, The role of rusts in corrosion and corrosion protection of iron and steel, Corrosion Science, 50, 1872 (2008). Doi: https://doi.org/10.1016/j.corsci.2008.03.008
  17. D.D.N. Singh, S. Yadav, J.K. Saha, Role of climatic conditions on corrosion characteristics of structural steels, Corrosion Science, 50, 93 (2008). Doi: https://doi.org/10.1016/j.corsci.2007.06.026
  18. S.J. Oh, D.C. Cook, H.E. Townsend, Atmospheric corrosion of different steels in marine, rural and industrial environments, Corrosion Science, 41, 1687 (1999). Doi: https://doi.org/10.1016/s0010-938x(99)00005-0
  19. J.G. Castana, C.A. Botero, A.H. Restrepo, E.A. Agudelo, E. Correa, F. Echeverria, Atmospheric corrosion of carbon steel in Colombia, Corrosion Science, 52, 216 (2010). Doi: https://doi.org/10.1016/j.corsci.2009.09.006
  20. S. Hoerle, F. Mazaudier, P. Dillmann, G. Santarini, Advances in understanding atmospheric corrosion of iron. II. Mechanistic modelling of wet-dry cycles, Corrosion Science, 46, 1431 (2004). Doi: https://doi.org/10.1016/j.corsci.2003.09.028
  21. I. O. Wallinder, C. Leygraf, Seasonal variations in corrosion rate and runoff rate of copper roofs in an urban and a rural atmospheric environment, Corrosion Science, 43, 2379 (2001). Doi: https://doi.org/10.1016/s0010-938x(01)00021-x
  22. M. Yamashita, H. Miyuki, Y. Matsuda, H. Nagano, T. Misawa, The long-term growth of the protective rust layer formed on weathering steel by atmospheric corrosion during a quarter of a century, Corrosion Science, 36, 283 (1994). Doi: https://doi.org/10.1016/0010-938x(94)90158-9
  23. M. Yamashita, T. Shimizu, H. Konishi, J. Mizuki, H. Uchida, Structure and protective performance of atmospheric corrosion product of Fe-Cr alloy film analyzed by Mossbauer spectroscopy and with synchrotron radiation X-rays, Corrosion Science, 45, 381 (2003). Doi: https://doi.org/10.1016/s0010-938x(02)00093-8
  24. Q.C. Zhang, J.S. Wu, J.J. Wang, W.L. Zheng, J.G. Chen, A.B. Li, Corrosion behaviour of weathering steel in marine atmosphere, Materials chemistry and physics, 77, 603 (2002). Doi: https://doi.org/10.1016/S0254-0584(02)00110-4
  25. X. Chen, J. Dong, E. Han, W. Ke, Effect of Ni on the ion-selectivity of rust layer on low alloy steel, Mater Letters, 61, 4050 (2007). Doi: https://doi.org/10.1016/j.matlet.2007.01.014
  26. J. Dong, E. Han, W. Ke, Review; introduction to atmospheric corrosion research in China, Science and Technology of Advanced Materials, 8, 559 (2007). Doi: https://doi.org/10.1016/j.stam.2007.08.010
  27. D. de la Fuente, I. Diaz, J. Simancas, B. Chico and M. Morcillo, Long-Term atmospheric corrosion of mild steel, Corrosion Science, 53, 604 (2011). Doi: https://doi.org/10.1016/j.corsci.2010.10.007
  28. KS D ISO 9226, Corrosion of metals and alloys?corrosivity of atmospheres-determination of corrosion rate of standard specimens for the evaluation of corrosivity, Korean Industrial Standards (2003).
  29. ISO 11664-4, Colorimetry - Part 4: CIE 1976 L*a*b* colour space, ISO, Geneva, Switzerland (2007).
  30. S. Sharifzadeh, L. H. Clemmensen, C. Borggaard, S. Stoier, and B. K. Ersboll, Supervised feature selection for linear and non-linear regression of L* a* b* color from multispectral images of meat, Engineering Applications of Artificial Intelligence, 27, 211 (2014). Doi: https://doi.org/10.1016/j.engappai.2013.09.004
  31. ISO 11664-6, Colorimetry - Part 6: CIEDE2000 colour-difference formula, ISO, Geneva, Switzerland (2013).
  32. KS L 2405, Method of measurement for specular glossiness, Korean Industrial Standards (2011).
  33. ASTM D 523, Standard test method for specular Gloss, ASTM (2018).