Journal of the Architectural Institute of Korea (대한건축학회논문집)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on How to Securing Information Continuity During the Architectural Design BIM Collaboration Process

건축설계 BIM 협업 과정에서 정보 연속성 확보 방안 연구

  • Park, Kyoung-Jun (Dept. of Architectural Design, Korea Polytechnic II College, Dept. of Architectural Engineering, Seoul National University of Science & Technology) ;
  • Ock, Jong-Ho (Dept. of Architectural Engineering, Seoul National University of Science & Technology)
  • 박경준 (한국폴리텍대학 건축설계과, 서울과학기술대학 건축과) ;
  • 옥종호 (서울과학기술대학 건축과)
  • Received : 2022.01.03
  • Accepted : 2022.07.26
  • Published : 2022.08.30
⟨ Previous Next ⟩

Abstract

Ten years have passed since BIM was first introduced in Korea. The transition to a digital work environment for integrated management and utilization of information is slow compared to the rapid and diverse development of BIM operation technology. This is due to different construction fields use different BIM authoring tools, so information severance occurs in the information exchange process for collaboration. To address this issue, research on the dissemination and improvement of the neutral file (IFC) has continued, but it is difficult to use it in practice due to its structural limitations. As a result, the increased workload and work errors have negatively impacted the reliability of the built BIM information where there is a reluctance to fully utilize this BIM technology. The purpose of this study is to propose an information management method that can be applied in practice to improve the information scission phenomenon during the BIM collaboration process. The architectural design BIM collaboration processes where information production and change processes occurred frequently were focused on. A fact-finding survey was conducted to increase practicality, and the collaboration procedure was established by analyzing the characteristics of information exchange during the collaboration process using the DSM (Design Structure Metrics) technique. An information exchange test was performed according to the established procedure to derive the cause of the problem. To solve the derived problem, existing studies and cases were reviewed to suggest ways to use Open API. To verify the effectiveness of this plan, a support tool was developed and verified according to this procedure.

Keywords

Acknowledgement

이 논문은 서울과학기술대학교 교내연구비 지원으로 수행되었습니다.

References

  1. Choi, J. S. (2011). A Study on the Development and Application of Quality Control Requirements for Improving the Quality of Architectural Design in Open BIM Environments, Ph.D. Dissertation, Department of Architectural Engineering, Kyung-Hee University. 1.
  2. Eom, J. U. (2014). Implementation of Collaboration System for BIM-based Structural Design in Steel Structures, Ph.D. Dissertation, Department of Architectural Engineering, Dong-Myung University. 2.
  3. Hong, S. C. (2014). The Study on the Modeling of Automa tic Foundation Re-Bar Placement Based on Open API and BIM, Thesis, Department of Architectural Engineering, Hany ang University. 7-8.
  4. Jang, H. S. (2017). Establishment of Integrated Design Model for Interoperability Optimization of The RC Structural Design Process, Ph.D. Dissertation, Department of Architectural Engineering, Hanyang University. 1.
  5. Jung, J. H. (2014). Development method on interface module for IFC-based data exchange of building structures, Journal of the Korea Academia-Industrial Cooperation Society, 15(4), 2484-2490. https://doi.org/10.5762/KAIS.2014.15.4.2484
  6. Kim, I. H. (2010). The history and concept of BIM, Review of Architecture and Building Science, 54(1), 16-21
  7. Lee, J. C. (2014). Representation of building structural information in IFC, Journal of the Computational Structural Engineering Institute of Korea, 27(3), 13-17.
  8. Lee, J.G., Lee, H.S., Park, M.S. & Jung, M.H., (2013), A framework integrating cost and schedule based on BIM using IFC, Korean Journal of Construction Engineering and Management, 14(3), 53-64. https://doi.org/10.6106/KJCEM.2013.14.3.053
  9. Lee, S. H. (2011). A Basic study on the development of an interface between revit architecture and midas for the augmented collaboration of architectural design and structural analysis at the early design Stage, Journal of the Architectural Institute of Korea, 27(5), 51-59.
  10. MOLIT(Ministry of Land, Infrastructure and Transport). (2020). Construction Industry BIM Basic Guidelines, 71-77.
  11. Ock, J. H. (2019). BIM information standard specification and standard expansion for IT integration design, advancement and demonstration. Research Report, Seoul National University of Science and Technology. 6.
  12. Park G.B., Jung, Y.H., Ham, N.H., & Kim, J.J. (2013). A study of the using application program interface(API) for improving productivity in construction engineering. Journal of KIBIM. 3(3). 29-38 https://doi.org/10.13161/KIBIM.2013.3.3.029
  13. Ryu, J.R., Mon, S.K., & Choo, S.Y. (2015). A study on the development and utilization of indoor spatial information visualization tool using the open BIM based IFC model, Journal of Korea Spatial Information Society. 23(5). 41-52.
  14. Shin, J.H., Kwon, S.W., Lee, K.H., Choi, S.D., & Kim, J.M. (2015). A study of the establishment of framework for information exchange based on IFC model in domestic collaborative design environment, Korean Journal of Construction Engineering and Management, 16(1). 24-34. https://doi.org/10.6106/KJCEM.2015.16.1.024