DOI QR코드

DOI QR Code

Thermomechanical and electrical resistance characteristics of superfine NiTi shape memory alloy wires

  • Qian, Hui (School of Civil Engineering, Zhengzhou University) ;
  • Yang, Boheng (School of Civil Engineering, Zhengzhou University) ;
  • Ren, Yonglin (School of Civil Engineering, Zhengzhou University) ;
  • Wang, Rende (Henan Haoze Electronics Co., Ltd.)
  • Received : 2021.07.29
  • Accepted : 2022.05.21
  • Published : 2022.08.25

Abstract

Structural health monitoring and structural vibration control are multidisciplinary and frontier research directions of civil engineering. As intelligent materials that integrate sensing and actuation capabilities, shape memory alloys (SMAs) exhibit multiple excellent characteristics, such as shape memory effect, superelasticity, corrosion resistance, fatigue resistance, and high energy density. Moreover, SMAs possess excellent resistance sensing properties and large deformation ability. Superfine NiTi SMA wires have potential applications in structural health monitoring and micro-drive system. In this study, the mechanical properties and electrical resistance sensing characteristics of superfine NiTi SMA wires were experimentally investigated. The mechanical parameters such as residual strain, hysteretic energy, secant stiffness, and equivalent damping ratio were analyzed at different training strain amplitudes and numbers of loading-unloading cycles. The results demonstrate that the detwinning process shortened with increasing training amplitude, while austenitic mechanical properties were not affected. In addition, superfine SMA wires showed good strain-resistance linear correlation, and the loading rate had little effect on their mechanical properties and electrical resistance sensing characteristics. This study aims to provide an experimental basis for the application of superfine SMA wires in engineering.

Keywords

Acknowledgement

This work was supported by the National Natural Science Foundation of China (Project codes: 51978631). The authors also appreciate Henan Haoze Electronics Co. Ltd for providing the superfine SMA wires, and the help from Mrs. Liping KANG and Mr. Yifei SHI during the experiments.

References

  1. Airoldi, G., Pozzi, M. and Riva, G. (1996), "The electrical resistance properties of shape memory alloys", MRS Online Proceedings Library. https://doi.org/10.1557/PROC-459-459
  2. Casciati, S. and Marzi, A. (2010), "Experimental studies on the fatigue life of shape memory alloy bars", Smart Struct. Syst., Int. J., 6(1), 73-85. https://doi.org/10.12989/sss.2010.6.1.073
  3. Churchill, C.B., Shaw, J.A. and Iadicola, M.A. (2010), Tips and tricks for characterizing shape memory alloy wire: Part 4-thermo-mechanical coupling.
  4. Cui, D., Song, G. and Li, H. (2010), "Modeling of the electrical resistance of shape memory alloy wires", Smart Mater. Struct., 55019. https://doi.org/10.1088/0964-1726/19/5/055019
  5. DesRoches, R., McCormick, J. and Delemont, M. (2004), "Cyclic properties of superelastic shape memory alloy wires and bars", J. Struct. Eng., 130(1), 38-46. https://doi.org/10.1061/(asce)0733-9445(2004)130:1(38)
  6. Dhanalakshmi, K., Umapathy, M., Ezhilarasi, D. and Bandyopadhyay, B. (2011), "Design and implementation of fast output sampling feedback control for shape memory alloy actuated structures", Smart Struct. Syst., Int. J., 8(4), 367-384. https://doi.org/10.12989/sss.2011.8.4.367
  7. Dolce, M. and Cardone, D. (2001a), "Mechanical behaviour of shape memory alloys for seismic applications 1. Martensite and austenite NiTi bars subjected to torsion", Int. J. Mech. Sci., 43(11), 2631-2656. https://doi.org/10.1016/S0020-7403(01)00049-2
  8. Dolce, M. and Cardone, D. (2001b), "Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension", Int. J. Mech. Sci., 43(11), 2657-2677. https://doi.org/10.1016/S0020-7403(01)00050-9
  9. Dutta, S.M. and Ghorbel, F.H. (2005), "Differential hysteresis modeling of a shape memory alloy wire actuator", IEEE/ASME Transact. Mechatron., 10(2), 189-197. https://doi.org/10.1109/TMECH.2005.844709
  10. Fang, C., Zheng, Y., Chen, J., Yam, M.C. and Wang, W. (2019), "Superelastic NiTi SMA cables: Thermal-mechanical behavior, hysteretic modelling and seismic application", Eng. Struct., 183, 533-549. https://doi.org/10.1016/j.engstruct.2019.01.049
  11. Ikuta, K., Tsukamoto, M. and Hirose, S. (1988), "Shape memory alloy servo actuator system with electric resistance feedback and application for active endoscope", Proceedings of 1988 IEEE International Conference on Robotics and Automation, Philadelphia, PA, USA, April, pp. 427-430.
  12. Ikuta, K., Tsukamoto, M. and Hirose, S. (1991), "Mathematical model and experimental verification of shape memory alloy for designing micro actuator", IEEE Micro Electro Mech. Syst., 103-108. https://doi.org/10.1109/MEMSYS.1991.114778
  13. Jain, A.K., Sharma, A.K., Khandekar, S. and Bhattacharya, B. (2020), "Shape Memory Alloy-Based Sensor for Two-Phase Flow Detection", IEEE Sens. J., 20(23), 14209-14217. https://doi.org/10.1109/JSEN.2020.3008191
  14. Janke, L., Czaderski, C., Motavalli, M. and Ruth, J. (2005), "Applications of shape memory alloys in civil engineering structures - Overview, limits and new ideas", Mater. Struct., 38(5), 578-592. https://doi.org/10.1617/14323
  15. Lee, S.H. and Kim, S.W. (2020), "Self-sensing-based deflection control of carbon fibre-reinforced polymer (CFRP)-based shape memory alloy hybrid composite beams", Compos. Struct., 251, 112544. https://doi.org/10.1016/j.compstruct.2020.112544
  16. Lee, H.T., Kim, M.S., Lee, G.Y., Kim, C.S. and Ahn, S.H. (2018), "Shape memory alloy (sma)-based microscale actuators with 60% deformation rate and 1.6 kHz actuation speed", Small, 14(23), 1801023. https://doi.org/10.1002/smll.201801023
  17. Lee, H.T., Seichepine, F. and Yang, G.Z. (2020), "Microtentacle actuators based on shape memory alloy smart soft composite", Adv. Funct. Mater., 30(34), 2002510. https://doi.org/10.1002/adfm.202002510
  18. Lester, B.T., Baxevanis, T., Chemisky, Y. and Lagoudas, D.C. (2015), "Review and perspectives: shape memory alloy composite systems", Acta Mech., 226, 3907-3960. https://doi.org/10.1007/s00707-015-1433-0
  19. Mohan, S. and Banerjee, A. (2021), "Modelling of minor hysteresis loop of shape memory alloy wire actuator and its application in self-sensing", Smart Mater. Struct., 30(5), 055011. https://doi.org/10.1088/1361-665X/abeefa
  20. Nahm, S.H., Kim, Y.J., Kim, J.M. and Yoon, D.J. (2005), "A study on the application of Ni-Ti shape memory alloy as a sensor", In: Materials Science Forum, Vol. 475, pp. 21043-2046. https://doi.org/10.4028/www.scientific.net/MSF.475-479.2043
  21. Nakshatharan, S. and Dhanalakshmi, K. (2014), "Differential resistance feedback control of a self-sensing shape memory alloy actuated system", ISA Trans., 53(2), 289-297. https://doi.org/10.1016/j.isatra.2013.11.002
  22. Novak, V., Sittner, P., Dayananda, G.N., Braz-Fernandes, F.M. and Mahesh, K.K. (2008), "Electric resistance variation of NiTi shape memory alloy wires in thermomechanical tests: Experiments and simulation", Mater. Sci. Eng.: A, 481, 127-133. https://doi.org/10.1016/j.msea.2007.02.162
  23. Qian, H., Li, H.N., Song, G.B. and Chen, H. (2011), "Dynamical behavior and constitutive model of superelasticity niti shape memory alloy wire: experiment and theory", J. Solid Mech., 32(04), 353-359. [In Chinese]
  24. Qian, H., Li, J.B., Li, H.N. and Chen, H. (2013), "Mechanical behavior tests of NiTi wires with different diameters for structural vibration control", J. Vib. Shock, 32(24), 89-95. [In Chinese]
  25. Sherif, M.M. and Ozbulut, O.E. (2020), "Thermomechanical and electrical response of a superelastic NiTi shape memory alloy cable", J. Intell. Mater. Syst. Struct., 31(19), 2229-2242. https://doi.org/10.1177/1045389X20943952
  26. Shi, Z., Wang, T. and Da, L. (2014), "Performance analyses of antagonistic shape memory alloy actuators based on recovered strain", Smart Struct. Syst., Int. J., 14(5), 765-784. https://doi.org/10.12989/sss.2014.14.5.765
  27. Song, G., Mo, Y.L., Otero, K. and Gu, H. (2006), "Health monitoring and rehabilitation of a concrete structure using intelligent materials", Smart Mater. Struct., 15(2), 309-314. https://doi.org/10.1088/0964-1726/15/2/010
  28. Song, G., Ma, N. and Lee, H.J. (2007), "Position estimation and control of SMA actuators based on electrical resistance measurement", Smart Struct. Syst., Int. J., 3(2), 189-200. https://doi.org/10.12989/sss.2007.3.2.189
  29. Sreekanth, M., Mathew, A.T. and Vijayakumar, R. (2018), "A novel model-based approach for resistance estimation using rise time and sensorless position control of sub-millimetre shape memory alloy helical spring actuator", J. Intell. Mater. Syst. Struct., 29(6), 1050-1064. https://doi.org/10.1177/1045389X17730911
  30. Suhail, R., Chen, J.F., Amato, G. and McCrum, D. (2020a), "Mechanical behaviour of NiTiNb shape memory alloy wires-strain localisation and effect of strain rate", Mech. Mater., 144, 103346. https://doi.org/10.1016/j.mechmat.2020.103346
  31. Suhail, R., Amato, G. and McCrum, D. (2020b), "Heat-activated prestressing of NiTiNb shape memory alloy wires", Eng. Struct., 206, 110128. https://doi.org/10.1016/j.engstruct.2019.110128
  32. Suhail, R., Amato, G. and McCrum, D. (2021), "Thermo-mechanical characterisation of NiTi-based shape memory alloy wires for civil engineering applications", J. Intell. Mater. Syst. Struct., 32(20), 2420-2436. https://doi.org/10.1177/1045389X211001437
  33. Zadafiya, K., Kumari, S., Chatterjee, S. and Abhishek, K. (2021), "Recent trends in non-traditional machining of shape memory alloys (SMAs): A review", CIRP J. Manuf. Sci. Technol., 32, 217-227. https://doi.org/10.1016/j.cirpj.2021.01.003
  34. Zhang, J.J., Yin, Y.H. and Zhu, J.Y. (2013), "Electrical resistivity-based study of self-sensing properties for shape memory alloy-actuated artificial muscle", Sensors, 13(10), 12958-12974. https://doi.org/10.3390/s131012958