DOI QR코드

DOI QR Code

Underwater contactless wet-mateable connector using bowl-shaped coils

  • Zhao, Qichao (State Key Laboratory of Fluid Power and Mechatronic Systems, Department of Mechanical Engineering, Zhejiang University) ;
  • Wang, Tianlei (State Key Laboratory of Fluid Power and Mechatronic Systems, Department of Mechanical Engineering, Zhejiang University) ;
  • Zhi, Hui (State Key Laboratory of Fluid Power and Mechatronic Systems, Department of Mechanical Engineering, Zhejiang University) ;
  • Wu, Xin (State Key Laboratory of Fluid Power and Mechatronic Systems, Department of Mechanical Engineering, Zhejiang University) ;
  • Zhang, Yurui (State Key Laboratory of Fluid Power and Mechatronic Systems, Department of Mechanical Engineering, Zhejiang University) ;
  • Yang, Canjun (State Key Laboratory of Fluid Power and Mechatronic Systems, Department of Mechanical Engineering, Zhejiang University) ;
  • Chen, Yanhu (State Key Laboratory of Fluid Power and Mechatronic Systems, Department of Mechanical Engineering, Zhejiang University)
  • Received : 2021.09.25
  • Accepted : 2022.03.23
  • Published : 2022.07.20

Abstract

Wet-mateable connectors enabling power and communication for underwater equipment are greatly favored for underwater systems. However, conventional underwater wet-mateable connectors with electrical contact conductors have the features of high cost, limited mate/de-mate times, and high risk of ground faults when being applied underwater, which limits their used. In this paper, a contactless underwater wet-mateable connector with bowl-shaped couplers was proposed, and an equivalent circuit for inductive power transmission was modeled and analyzed. Then the mathematical expression of the magnetic induction intensity of the bowl-shaped coil was derived. The parameters including ρco, zco, and s0 of the coil were analyzed and optimized to attain better performance and lower cost. A prototype was built and tested. Results showed that it can transmit power up to 1125 W with an efficiency of 85%. In addition, it can achieve a data rate up to 6 MB/s under a water pressure of 20 MPa.

Keywords

References

  1. Shukla, A., Karki, H.: Application of robotics in ofshore oil and gas industry-a review Part II. Robot. Auton. Syst. 75, 508-524 (2016) https://doi.org/10.1016/j.robot.2015.09.013
  2. Jahan, E., Hazari, M.R., Rosyadi, M., Umemura, A., Takahashi, R., Tamura, J.: Simplifed model of HVDC transmission system connecting ofshore wind farm to onshore grid. In: 2017 IEEE Manchester PowerTech. Manchester, UK: IEEE. pp 1-6 (2017)
  3. Doerry, N.: Naval Power systems: integrated power systems for the continuity of the electrical power supply. IEEE Electrifcation Mag. 3, 12-21 (2015) https://doi.org/10.1109/MELE.2015.2413434
  4. Lin, M., Yang, C.: Ocean observation technologies: a review. Chin. J. Mech. Eng. 33, 32 (2020) https://doi.org/10.1186/s10033-020-00449-z
  5. G. EB.: Operational considerations for underwater-mateable connectors. Oceans 2003. San Diego, CA, USA, USA; 2003. pp 1843-1848
  6. Electrical Wet-Mate Connectors. https://www.te.com/usa-en/products/connectors/intersection/electrical-wet-mate.html. Accessed 15 Jul 2021.
  7. Zhang, Z., Pang, H., Georgiadis, A., Cecati, C.: Wireless power transfer-an overview. IEEE T. Ind. Electron. 66, 1044-1058 (2019) https://doi.org/10.1109/tie.2018.2835378
  8. Kojiya, T., Sato, F., Matsuki, H., Sato, T.: Construction of non-contacting power feeding system to underwater vehicle utilizing electro magnetic induction. pp 709-712 (2005)
  9. McGinnis, T., Henze, C.P., Conroy, K.: Inductive power system for autonomous underwater vehicles. p 736 (2007)
  10. Baer, C.M., Alten, M., Bixler, G., Fredette, L., Owens, J., Purvinis, G., Schaefer, J., Stout, G.: Non-contact wet mateable connector. pp 2442-2447 (2009)
  11. Li, D., Wang, T., Yang, C.: A novel designed load adaptive noncontact wet-mate connector for subsea devices. Mar Technol Soc J 51, 31-40 (2017)
  12. MESA-Systemtechnik GmbH Konstanz am Bodensee. https://mesa-systemtechnik.de/. Accessed 26 Nov 2021
  13. Csignum | Seatooth®Connect. https://www.csignum.com/product/seatooth-connect/. Accessed 26 Nov 2021.
  14. Granger, R.P., Baer, C.M., Gabriel, N.H., Labosky, J.J., Galford, T.C.: Non-contact wet mateable connectors for power and data transmission (2013)
  15. Zhang, X., Lu, X., Zhang, X., Wang, L.: A novel three-coil wireless power transfer system and its optimization for implantable biomedical applications. Neural Comput. Appl. 32, 7069-7078 (2020) https://doi.org/10.1007/s00521-019-04214-9
  16. Lopez-Alcolea, F.J., Real, J.V.D., Roncero-Sanchez, P., Torres, A.P.: Modeling of a magnetic coupler based on single- and double-layered rectangular planar coils with in-plane misalignment for wireless power transfer. IEEE Trans. Power Electric. 35, 5102-5121 (2020) https://doi.org/10.1109/TPEL.2019.2944194
  17. Kim, D., Ahn, D.: Self-Tuning LCC inverter using PWM-controlled switched capacitor for inductive wireless power transfer. IEEE Trans. Ind. Electron. 66, 3983-3992 (2019) https://doi.org/10.1109/TIE.2018.2844796
  18. Wang, C., Covic, G., Stielau, O.: Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems. IEEE Trans. Ind. Electron. 51, 148-157 (2004) https://doi.org/10.1109/TIE.2003.822038
  19. Yilmaz, T., Hasan, N., Zane, R., Pantic, Z.: Multi-Objective optimization of circular magnetic couplers for wireless power transfer applications. IEEE Trans. Magn. 53, 1-12 (2017) https://doi.org/10.1109/TMAG.2017.2692218
  20. Lee, M., Kramer, B.A., Chen, C.-C., Volakis, J.L.: Distributed lumped loads and lossy transmission line model for wideband spiral antenna miniaturization and characterization. IEEE T Antenn Propag 55, 2671-2678 (2007) https://doi.org/10.1109/TAP.2007.905823
  21. Li, S., Qu, W., Liu, C., Qiu, T., Zhao, Z.: Survey on high reliability wireless communication for underwater sensor networks. J. Netw. Comput. Appl. 148, 102446 (2019) https://doi.org/10.1016/j.jnca.2019.102446
  22. Lin, R., Li, D., Zhang, T., et al.: A non-contact docking system for charging and recovering autonomous underwater vehicle. J. Mar. Sci. Technol. 24, 902-916 (2019) https://doi.org/10.1007/s00773-018-0595-6