Structural Engineering and Mechanics

  • 제83권2호
  • /
  • Pages.245-257
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Prediction of shear strength and drift capacity of corroded reinforced concrete structural shear walls

  • Yang, Zhihong (School of Civil and Environmental Engineering, Nanyang Technological University) ;
  • Li, Bing (School of Civil and Environmental Engineering, Nanyang Technological University)
  • 투고 : 2022.03.22
  • 심사 : 2022.05.22
  • 발행 : 2022.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

As the main lateral load resisting system in high-rise reinforced concrete structures, the mechanical performance of shear wall has a significant impact on the structure, especially for high-rise buildings. Steel corrosion has been recognized as an important factor affecting the mechanical performance and durability of the reinforced concrete structures. To investigate the effect on the seismic behaviour of corroded reinforced concrete shear wall induced by corrosion, analytical investigations and simulations were done to observe the effect of corrosion on the ultimate seismic capacity and drift capacity of shear walls. To ensure the accuracy of the simulation software, several validations were made using both non-corroded and corroded reinforced concrete shear walls based on some test results in previous literature. Thereafter, a parametric study, including 200 FE models, was done to study the influence of some critical parameters on corroded structural shear walls with boundary element. These parameters include corrosion levels, axial force ratio, aspect ratio, and concrete compressive strength. The results obtained would then be used to propose equations to predict the seismic resistance and drift capacity of shear walls with various corrosion levels.

키워드

참고문헌

  1. Adorno-Bonilla, C.M. (2016), "Shear strength and displacement capacity of squat reinforced concrete shear walls", PhD Thesis, University of Puerto Rico Mayaguez Campus, Puerto Rico.
  2. Allampallewar, S.B. and Srividya, A. (2008), "Modeling cover cracking due to rebar corrosion in RC members", Struct. Eng. Mech., 30(6), 713-732. https://doi.org/10.12989/sem.2008.30.6.713.
  3. Cape, M. (1999), "Residual service-life assessment of existing R/C structures", Master's Thesis, Chalmers Univ. of Technology, Goteborg, Sweden and Milan Univ. of Technology, Milan, Italy.
  4. Comite Euro-International du Beton (1993), CEB-FIP Model-Code 1990: Design Code, Thomas Telford Publishing, London, UK.
  5. Coronelli, D. and Gambarova, P. (2004), "Structural assessment of corroded reinforced concrete beams: Modeling guidelines", J. Struct. Eng., 130(8), 1214-1224. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1214).
  6. Cui, Z.H., Shen, D.J., Huang, C.B. and Li, M. (2013), "Experimental study on relationship between half-cell potentials and load carrying capacity of corroded reinforced concrete shear walls", Appl. Mech. Mater., 351, 927-932. https://doi.org/10.4028/www.scientific.net/AMM.351-352.927.
  7. DIANA TNO (2012) DIANA Finite Element Analysis User's Manual, TNO Building and Construction Research, Delft, The Netherlands.
  8. Du, Y.G., Clark, L.A. and Chan, A.H.C. (2005a), "Residual capacity of corroded reinforcing bars", Mag. Concrete Res., 57(3), 135-147. https://doi.org/10.1680/macr.2005.57.3.135.
  9. Du, Y.G., Clark, L.A. and Chan, A.H.C. (2005b), "Effect of corrosion on ductility of reinforcing bars", Mag. Concrete Res., 57(7), 407-419. https://doi.org/10.1680/macr.2005.57.7.407.
  10. Feenstra, P.H. (1993), "Computational aspects of biaxial stress in plain and reinforced concrete", PhD Thesis, Delft University of Technology, Delft, The Netherlands.
  11. Gu, X., Guo, H., Zhou, B., Zhang, W. and Jiang, C. (2018), "Corrosion non-uniformity of steel bars and reliability of corroded RC beams", Eng. Struct., 167, 188-202. https://doi.org/10.1016/j.engstruct.2018.04.020.
  12. Hordijk, D.A. (1991), "Local approach to fracture of concrete", Doctoral Thesis, Delft University of Technology, Delft, The Netherlands.
  13. Kim, K., Bolander, J.E. and Lim, Y.M. (2012), "Simulation of corroded RC structures using a three-dimensional irregular lattice model", Struct. Eng. Mech., 41(5), 645-662. https://doi.org/10.12989/sem.2012.41.5.645.
  14. Lee, H.S., Noguchi, T. and Tomosawa, F. (2002), "Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion", Cement Concrete Res., 32(8), 1313-1318. https://doi.org/10.1016/S0008-8846(02)00783-4.
  15. Looi, D.T.W. and Su, R.K.L. (2017), "Predictive seismic shear capacity model of rectangular squat RC shear walls in flexural and shear zones", 16th World Conference on Earthquake Engineering, Santiago, Chile,.
  16. Looi, D.T.W., Su, R.K.L., Cheng, B. and Zhou, M.J. (2016), "Ultimate drift prediction models of rectangular squat reinforced concrete shear walls", Mechanics of Structures and Materials: Advancements and Challenges, 1653-1659,.
  17. Ma, Y., Che, Y. and Gong, J. (2012), "Behavior of corrosion damaged circular reinforced concrete columns under cyclic loading", Constr. Build. Mater., 29, 548-556. https://doi.org/10.1016/j.conbuildmat.2011.11.002.
  18. Meldrum, J., Gupta, A. and McDonald, B. (2004), "Investigation of structural damage in a corrosive environment: A case study", Proceedings of the Fifth International Conference on Case Histories in Geotechnical Engineering, New York, USA.
  19. Molina, F.J., Alonso, C. and Andrade, C. (1993), "Cover cracking as a function of rebar corrosion: Part 2-Numerical model", Mater. Struct., 26(9), 532-548. https://doi.org/10.1007/BF02472864.
  20. Ortega, N.F., Rivas, I.E., Aveldano, R.R. and Peralta, M.H. (2011), "Beams affected by corrosion influence of reinforcement placement in the cracking", Struct. Eng. Mech., 37(2), 163-175. https://doi.org/10.12989/sem.2011.37.2.163.
  21. Ou, Y.C. and Nguyen, N.D. (2014), "Plastic hinge length of corroded reinforced concrete beams", ACI Struct. J., 111(5), 1049. https://doi.org/1049.10.14359/51686872.
  22. Oyamoto, T., Nimura, A., Okayasu, T., Sawada, S., Umeki, Y., Wada, H. and Miyazaki, T. (2017), "Experimental and analytical study of structural performance of rc shear walls with corroded reinforcement", J. Adv. Concrete Technol., 15(11), 662-683. https://doi.org/10.3151/jact.15.662.
  23. Qin, Q. (2004), "Experimental studies on seismic behavior of corroded squat RC shear walls under artificial climate environment", Master's Thesis, Xi'an University of Architecture and Technology, Xi'an, China.
  24. Saatcioglu, M. and Razvi, S.R. (1992), "Strength and ductility of confined concrete", J. Struct. Eng., 118(6), 1590-1607. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:6(1590).
  25. Shen, D., Yang, Q., Huang, C., Cui, Z. and Zhang, J. (2019), "Tests on seismic performance of corroded reinforced concrete shear walls repaired with basalt fiber-reinforced polymers", Constr. Build. Mater., 209, 508-521. https://doi.org/10.1016/j.conbuildmat.2019.02.109.
  26. Stewart, M.G. (2009), "Mechanical behaviour of pitting corrosion of flexural and shear reinforcement and its effect on structural reliability of corroding RC beams", Struct. Saf., 31(1), 19-30. https://doi.org/10.1016/j.strusafe.2007.12.001.
  27. Vu, N.S., Yu, B. and Li, B. (2016), "Prediction of strength and drift capacity of corroded reinforced concrete columns", Constr. Build. Mater., 115, 304-318. https://doi.org/10.1016/j.conbuildmat.2016.04.048.
  28. Wang, X. and Liu, X. (2004), "Bond strength modeling for corroded reinforcement in reinforced concrete", Struct. Eng. Mech., 17(6), 863-878. https://doi.org/10.12989/sem.2004.17.6.863.
  29. Xiang, W. (2008), "Seismic performance of RC structural squat walls with limited transverse reinforcement", PhD Thesis, Nanyang Technological University, Singapore.
  30. Zandi Hanjari, K., Kettil, P. and Lundgren, K. (2011), "Analysis of mechanical behavior of corroded reinforced concrete structures", ACI Struct. J., 108(5), 532-541. https://doi.org/10.14359/51683210.
  31. Zhou, Y., Zheng, S., Chen, L., Long, L., Dong, L. and Zheng, J. (2021), "Experimental and analytical investigations into the seismic behavior and resistance of corroded reinforced concrete walls", Eng. Struct., 238, 112154. https://doi.org/10.1016/j.engstruct.2021.112154.