Earthquakes and Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Numerical finite element study of a new perforated steel plate shear wall under cyclic loading

  • Received : 2022.02.03
  • Accepted : 2022.04.20
  • Published : 2022.06.25
⟨ Previous Next ⟩

Abstract

Steel plate shear walls (SPSWs) are one of the most important and widely used lateral load-bearing systems. The reason for this is easier execution than reinforced concrete (RC) shear walls, faster construction time, and lower final weight of the structure. However, the main drawback of SPSWs is premature buckling in low drift ratios, which affects the energy absorption capacity and global performance of the system. To address this problem, two groups of SPSWs under cyclic loading were investigated using the finite element method (FEM). In the first group, several series of circular rings have been used and in the second group, a new type of SPSW with concentric circular rings (CCRs) has been introduced. Numerous parameters include in yield stress of steel plate wall materials, steel panel thickness, and ring width were considered in nonlinear static analysis. At first, a three-dimensional (3D) numerical model was validated using three sets of laboratory SPSWs and the difference in results between numerical models and experimental specimens was less than 5% in all cases. The results of numerical models revealed that the full SPSW undergoes shear buckling at a drift ratio of 0.2% and its hysteresis behavior has a pinching in the middle part of load-drift ratio curve. Whereas, in the two categories of proposed SPSWs, the hysteresis behavior is complete and stable, and in most cases no capacity degradation of up to 6% drift ratio has been observed. Also, in most numerical models, the tangential stiffness remains almost constant in each cycle. Finally, for the innovative SPSW, a relationship was suggested to determine the shear capacity of the proposed steel wall relative to the wall slenderness coefficient.

Keywords

References

  1. Abaqus, V. (2014), 6.14 Documentation, Dassault Systemes Simulia Corporation, 651(6.2).
  2. Ahmadi, H.M. and De Matteis, G. (2020), "Seismic performance of steel shear panels with butterfly-shaped links", Int. J. Earthq. Eng., 37, 85-101.
  3. Ahmadi, M. and Ebadi Jamkhaneh, M. (2021), "Numerical investigation of energy dissipation device to improve seismic response of existing steel buildings with soft-first-story", Int. J. Steel Struct., 21(2), 691-702. https://doi.org/10.1007/s13296-021-00466-1.
  4. Alinia, M. and Shirazi, R.S. (2009), "On the design of stiffeners in steel plate shear walls", J. Constr. Steel Res., 65(10-11), 2069-2077. https://doi.org/10.1016/j.jcsr.2009.06.009.
  5. Bagheri, M., Jamkhaneh, M.E. and Samali, B. (2018), "Effect of seismic soil-pile-structure interaction on mid-and high-rise steel buildings resting on a group of pile foundations", Int. J. Geom., 18(9), 04018103. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001222.
  6. Bagherinejad, M.H. and Haghollahi, A. (2020), "New form of perforated steel plate shear wall in simple frames using topology optimization", Struct. Eng. Mech., 74(3), 325-339. https://doi.org/10.12989/sem.2020.74.3.325.
  7. Barkhordari, M., Hosseinzadeh, S.A. and Seddighi, M. (2014), "Behavior of steel plate shear walls with stiffened full-height rectangular openings", Asian J. Civil Eng., 15(5), 741-759. https://www.sid.ir/en/journal/ViewPaper.aspx?id=419567.
  8. Chen, S.J. and Jhang, C. (2006), "Cyclic behavior of low yield point steel shear walls", Thin Wall. Struct., 44(7),730-738. https://doi.org/10.1016/j.tws.2006.08.002.
  9. Cortes, G. and Liu, J. (2011), "Experimental evaluation of steel slit panel-frames for seismic resistance", J. Constr. Steel Res., 67(2), 181-191. https://doi.org/10.1016/j.jcsr.2010.08.002.
  10. Ebadi-Jamkhaneh, M. and Ahmadi, M. (2021), "Comprehensive investigations of the effect of bolt tightness on axial behavior of a MERO joint system: experimental, FEM, and soft computing approaches", J. Struct. Eng., 147(12), 04021197. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003168.
  11. Ebadi-Jamkhaneh, M., Ahmadi, M. and Kontoni, D.N. (2021d), "Experimental study of the mechanical properties of burnt clay bricks incorporated with plastic and steel waste materials", In IOP Conference Series: Earth and Environmental Science, volume 899, Athens, Greece, October.
  12. Ebadi-Jamkhaneh, M., Homaioon-Ebrahimi, A. and Kontoni, D.P.N. (2021e), "Numerical finite element study of strengthening of damaged reinforced concrete members with carbon and glass FRP wraps", Comp. Concrete, 28(2), 137-147. https://doi.org/10.12989/cac.2021.28.2.137.
  13. Ebadi-Jamkhaneh, M., Homaioon-Ebrahimi, A., Kontoni, D.P.N. and Shokri-Amiri, M. (2021c), "Numerical FEM assessment of soil-pile system in liquefiable soil under earthquake loading including soil-pile interaction", Geom. Eng., 27(5), 465-479. https://doi.org/10.12989/gae.2021.27.5.465.
  14. Ebadi-Jamkhaneh, M., Rezaei, M. and Ahmadi, M. (2021b), "Seismic behavior of steel braced frames equipped with metal foam", Int. J. Steel Struct., 21(4), 1420-1430. https://doi.org/10.1007/s13296-021-00513-x.
  15. Ebadi Jamkhaneh, M. and Kafi, M.A. (2018), "Equalizing octagonal PEC columns with steel columns: Experimental and theoretical study", Practice Period. Struct. Design and Constr., 23(3), 04018012. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000375.
  16. Ebadi Jamkhaneh, M., Ahmadi, M. and Shokri Amiri, M. (2021a), "Sustainable reuse of inorganic materials in eco-friendly clay bricks: special focus on mechanical and durability assessment", J. Mater. Civil Eng., 33(6), 04021111. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003737.
  17. Ebadi Jamkhaneh, M., Ebrahimi, A.H. and Shokri Amiri, M. (2019a), "Experimental and numerical investigation of steel moment resisting frame with U-shaped metallic yielding damper", Int. J. Steel Struct., 19(3), 806-818. https://doi.org/10.1007/s13296-018-0166-z.
  18. Ebadi Jamkhaneh, M., Homaioon Ebrahimi, A. and Shokri Amiri, M. (2018), "Seismic performance of steel-braced frames with an all-steel buckling restrained brace", Practice Period. Struct. Design and Construct., 23(3), 04018016. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000381.
  19. Ebadi Jamkhaneh, M., Homaioon Ebrahimi, A. and Shokri Amiri, M. (2019c), "Investigation of the seismic behavior of brace frames with new corrugated all-steel buckling restrained brace", Int. J. Steel Struct., 19(4), 1225-1236. https://doi.org/10.1007/s13296-018-00202-2.
  20. Ebadi Jamkhaneh, M., Homaioon Ebrahimi, A. and Shokri Amiri, M. (2020a), "Numerical investigation of the behavior of MERO joint system under combined loading regarding helical threads of elements", Int. J. of Steel Struct. 20(3), 897-909. https://doi.org/10.1007/s13296-020-00330-8.
  21. Ebadi Jamkhaneh, M., Homaioon Ebrahimi, A. and Shokri Amiri, M. (2020b), "Investigation of the behaviour of geosyntheticreinforced stone columns", Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 173(6), 535-545. https://doi.org/10.1680/jgeen.19.00161.
  22. Ebadi Jamkhaneh, M., Kafi, M.A. and Kheyroddin, A. (2019b), "Behavior of partially encased composite members under various load conditions: Experimental and analytical models", Adv. Struct. Eng., 22(1), 94-111. https://doi.org/10.1177/1369433218778725.
  23. Ebadi Jamkhaneh, M., Kafi, M.A., Kheyroddin, A. and Shokri Amiri, M. (2019d), "Progressive collapse resistance of a composite steel and concrete structural frame", Proceedings of the Institution of Civil Engineers-Structures and Buildings, 172(3), 197-213. https://doi.org/10.1680/jstbu.17.00149.
  24. Ebrahimi, A.H., Ebadi Jamkhaneh, M. and Shokri Amiri, M. (2018), "3D Finite-Element Analysis of Steel Moment Frames Including Long-Span Entrance by Strengthening Steel Cables and Diagonal Concentrically Braced Frames under Progressive Collapse", Practice Period. Struct. Design Constr., 23(4), 04018025. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000388.
  25. Edalati, S. A., Yadollahi, Y., Pakar, I. and Bayat, M. (2015), "On the effect of GFRP fibers on retrofitting steel shear walls with low yield stress", Earthq. Struct., 8(6), 1453-1461. https://doi.org/10.12989/eas.2015.8.6.1453.
  26. Egorova, N., Eatherton, M.R. and Maurya, A. (2014), "Experimental study of ring-shaped steel plate shear walls", J. Constr. Steel Res., 103, 179-189. https://doi.org/10.1016/j.jcsr.2014.09.002.
  27. Formisano, A. and Lombardi, L. (2018), "Low yield metals and perforated steel shear walls for seismic protection of existing RC buildings", Cogent Eng., 5(1), 1525813. https://doi.org/10.1080/23311916.2018.1525813.
  28. Formisano, A. and Mazzolani, F.M. (2016), "Numerical non-linear behaviour of Aluminium Perforated Shear Walls: A parametric study", Key Eng. Materials, 710, 250-255. https://doi.org/10.4028/www.scientific.net/KEM.710.250.
  29. Hitaka, T. and Matsui, C. (2003), "Experimental study on steel shear wall with slits", J. Struct. Eng., 129(5), 586-595. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:5(586).
  30. Jamkhaneh, M.E. and Kafi, M.A. (2017), "Experimental and numerical investigation of octagonal partially encased composite columns subject to axial and torsion moment loading", Civil Eng. J., 3(10), 939-955. https://doi.org/10.28991/cej-030927.
  31. Jamkhaneh, M.E. and Kafi, M.A. (2018), "Experimental and numerical study of octagonal composite column subject to various loading", Periodica Polytechnica Civil Eng., 62(2), 413-422. https://doi.org/10.3311/PPci.11334.
  32. Jamkhaneh, M.E., Ahmadi, M. and Sadeghian, P. (2020), "Simplified relations for confinement factors of partially and highly confined areas of concrete in partially encased composite columns", Eng. Struct., 208, 110303. https://doi.org/10.1016/j.engstruct.2020.110303.
  33. Khatamirad, M. and Shariatmadar, H. (2017), "Experimental and analytical study of steel slit shear wall", Steel Comp. Struct., 24(6), 741-751. https://doi.org/10.12989/scs.2017.24.6.741.
  34. Koloo, F.A., Badakhshan, A., Fallahnejad, H., Jamkhaneh, M.E. and Ahmadi, M. (2018), "Investigation of proposed concrete filled steel tube connections under reversed cyclic loading", Int. J. Steel Struct., 18(1), 163-177. https://doi.org/10.1007/s13296-018-0313-6.
  35. Moghimi, H. and Driver, R.G. (2011), "Effect of regular perforation patterns on steel plate shear wall column demands", Struct. Congress, 2917-2928. https://doi.org/10.1061/41171(401)253.
  36. Monsef Ahmadi, H., Sheidaii, M., Boudaghi, H. and De Matteis, G. (2020), "Experimental and numerical study on largely perforated steel shear plates with rectangular tube-shaped links", Adv. Struct. Eng., 23(15), 3307-3322. https://doi.org/10.1177/1369433220937147.
  37. Monsef Ahmadi, H., Sheidaii, M.R., Tariverdilo, S., Formisano, A. and De Matteis, G. (2021), "Seismic behavior of thin cold-formed steel plate shear walls with different perforation patterns", Earthq. Struct., 20(4), 377-388. https://doi.org/10.12989/eas.2021.20.4.377.
  38. Nooralizadeh Keshteli, O., Rahimi, S. and Ebadi Jamkhaneh, M. (2021), "Numerical investigation of steel moment-resisting frame on sandy soil under normal fault rupture", Int. J. Steel Struct., 21(2), 703-716. https://doi.org/10.1007/s13296-021-00467-0.
  39. Phillips, A.R. and Eatherton, M.R. (2018), "Large-scale experimental study of ring shaped-steel plate shear walls", J. Struct. Eng., 144(8), 04018106. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002119.
  40. Purba, R. and Bruneau, M. (2009), "Finite-element investigation and design recommendations for perforated steel plate shear walls", J. Struct. Eng., 135(11), 1367-1376. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000061.
  41. Rezai, M. (1999), "Seismic behaviour of steel plate shear walls by shake table testing", Ph.D. Dissertation, University of British Columbia. http://dx.doi.org/10.14288/1.0050150.
  42. Roberts, T.M. and Sabouri-Ghomi, S. (1992), "Hysteretic characteristics of unstiffened perforated steel plate shear panels", Thin Wall. Struct. 14(2), 139-151. https://doi.org/10.1016/0263-8231(92)90047-Z.
  43. Sabouri-Ghomi, S. and Mamazizi, S. (2015), "Experimental investigation on stiffened steel plate shear walls with two rectangular openings", Thin Wall. Struct., 86, 56-66. https://doi.org/10.1016/j.tws.2014.10.005.
  44. Salimi, S.M., Rahimi, S., Hoseinzadeh, M., Kontoni, D.P.N. and Ebadi-Jamkhaneh, M. (2021), "Numerical 3D finite element assessment of bending moment-resisting frame equipped with semi-disconnected steel plate shear wall and yielding plate connection", Metals, 11(4), 604. https://doi.org/10.3390/met11040604.
  45. Seddighi, M., Barkhordari, M.A. and Hosseinzadeh, S.A.A. (2019), "Behavior of FRP-reinforced steel plate shear walls with various reinforcement designs", Steel Compos. Struct. 33(5), 729-746. https://doi.org/10.12989/scs.2019.33.5.729.
  46. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N-T. and Salih, M.N. (2019), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct. 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
  47. Valizadeh, H., Sheidaii, M. and Showkati, H. (2012), "Experimental investigation on cyclic behavior of perforated steel plate shear walls", J. Construct. Steel Res., 70, 308-316. https://doi.org/10.1016/j.jcsr.2011.09.016.
  48. Vian, D. and Bruneau, M. (2005), "Testing of special LYS steel plate shear walls", Technical Report MCEER-05-0010; University at Buffalo, State University of New York.
  49. Zarrinkolaei, F.A., Naseri, A. and Gholampour, S. (2021), "Numerical assessment of effect of opening on behavior of perforated steel shear walls", J. Construct. Steel Res., 181, 106587. https://doi.org/10.1016/j.jcsr.2021.106587.