DOI QR코드

DOI QR Code

Friction welding of multi-shape ABS based components with Nano Zno and Nano Sio2 as welding reinforcement

  • Afzali, Mohammad (Department of Mechanical Engineering, Sari Branch, Islamic Azad University) ;
  • Rostamiyan, Yasser (Department of Mechanical Engineering, Sari Branch, Islamic Azad University)
  • 투고 : 2020.05.05
  • 심사 : 2022.05.02
  • 발행 : 2022.06.25

초록

Due to the high usage of ABS in industries, such as aerospace, auto, recreational devices, boat, submarines, etc., the purpose of this project was to find a way to weld this material, which gives advantages, such as affordable, high speed, and good connection quality. In this experimental project, the friction welding method was applied with parameters such as numerical control (NC) machine with two different speeds and three cross-sections, including a flat surface, cone, and step. After the end of the welding process, samples were then applied for both tensile and bending tests of materials, and the results showed that, with increasing the machining velocity Considering of samples, the friction of the surface increased and then caused to increase in the surface temperature. Considering mentioned contents, the melting temperature of composite materials increased. This can give a chance to have a better combination of Nanomaterial to base melted materials. Thus, the result showed that, with increasing the weight percentage (wt %) of Nanomaterials contents, and machining velocity, the mechanical behavior of welded area for all three types of samples were just increased. This enhancement is due to the better melting process on the welded area of different Nano contents; also, the results showed that the shape of the welding area could play a significant role, and by changing the shape, the results also changed drastically.A better shape for the welding process was dedicated to the step surface.

키워드

참고문헌

  1. de Bilbao, E. (2021), "Bending properties of reinforcements in composites", Compos. Reinf. Optim. Perform., 375-405. https://doi.org/10.1016/B978-0-12-819005-0.00012-5.
  2. Gun'ko, V.M. (2019), "Polymer composites with functionalized silica", Polym. Compos. Function. Nanopart., 119-148. https://doi.org/10.1016/B978-0-12-814064-2.00004-4.
  3. Huang, Y., Meng, X., Xie, Y., Li, J. and Wan, L. (2019), "New technique of friction-based filling stacking joining for metal and polymer", Compos. Part B: Eng., 163, 217-223. https://doi.org/10.1016/j.compositesb.2018.11.050.
  4. Kumar, R., Singh, R., Ahuja, I.P.S., Amendola, A. and Penna, R. (2018), "Friction welding for the manufacturing of PA6 and ABS structures reinforced with Fe particles", Compos. Part B: Eng., 132, 244-257. https://doi.org/10.1016/j.compositesb.2017.08.018.
  5. Li, P., Li, J. and Dong, H. (2017), "Analytical description of heat generation and temperature field during the initial stage of rotary friction welding", J. Manuf. Proc., 25, 181-184. https://doi.org/10.1016/j.jmapro.2016.12.003.
  6. Magar, R. (2017), "Prediction of unconfined compressive and Brazilian tensile strength of fiber reinforced cement stabilized fly ash mixes using multiple linear regression and artificial neural network".
  7. Mura, A., Adamo, F., Wang, H., Leong, W.S., Ji, X. and Kong, J. (2019), "Investigation about tribological behavior of ABS and PC-ABS polymers coated with graphene", Tribol. Int., 134, 335-340. https://doi.org/10.1016/j.triboint.2019.02.017.
  8. Nan, X., Xiong, J., Jin, F., Li, X., Liao, Z., Zhang, F. and Li, J. (2019), "Modeling of rotary friction welding process based on maximum entropy production principle", J. Manuf. Proc., 37, 21-27. https://doi.org/10.1016/j.jmapro.2018.11.016.
  9. Rey-Vinolas, S., Engel, E. and Mateos-Timoneda, M.A. (2019), Polymers for Bone Repair, Bone Repair Biomaterials, Woodhead Publishing.
  10. Rostamiyan, Y., Fereidoon, A., Rezaeiashtiyani, M., Mashhadzadeh, A.H. and Salmankhani, A. (2015), "Experimental and optimizing flexural strength of epoxy-based nanocomposite: Effect of using nano silica and nano clay by using response surface design methodology", Mater. Des., 69, 96-104. https://doi.org/10.1016/j.matdes.2014.11.062.
  11. Schmicker, D., Persson, P.O. and Strackeljan, J. (2014), "Implicit geometry meshing for the simulation of rotary friction welding", J. Comput. Phys., 270, 478-489. https://doi.org/10.1016/j.jcp.2014.04.014.
  12. Shrivastava, A. (2018), Plastic Properties and Testing, Introduction to Plastics Engineering, 49-110.
  13. Sindu, B.S., Alex, A. and Sasmal, S. (2018), "Studies on structural interaction and performance of cement composite using Molecular Dynamics", Adv. Comput. Des., 3(2), 147-163. https://doi.org/10.12989/acd.2018.3.2.147.
  14. Singh, R., Kumar, R., Feo, L. and Fraternali, F. (2016), "Friction welding of dissimilar plastic/polymer materials with metal powder reinforcement for engineering applications", Compos. Part B: Eng., 101, 77-86. https://doi.org/10.1016/j.compositesb.2016.06.082.
  15. Soroush, M. and Grady, M.C. (2019), "Polymers, polymerization reactions, and computational quantum chemistry", Comput. Quant Chem., 1-16. https://doi.org/10.1016/B978-0-12-815983-5.00001-5.
  16. Srinivasa, M., Boorla, K.B., Eifler, T., Howard, T.J. and McMahon. C.A. (2019), "A challenge for variation simulation tools for mechanical assemblies", Couple. Syst. Mech., 4(1), 43-52. https://doi.org/10.12989/csm.2019.4.1.043.
  17. Stutz, M., Pixner, F., Wagner, J., Reheis, N., Raiser, E., Kestler, H. and Enzinger, N. (2018), "Rotary friction welding of molybdenum components", Int. J. Refract. Metal. Hard Mater., 73, 79-84. https://doi.org/10.1016/j.ijrmhm.2018.02.004.
  18. Winiczenko, R., Goroch, O., Krzynska, A. and Kaczorowski, M. (2017), "Friction welding of tungsten heavy alloy with aluminium alloy", J. Mater. Pr. Technol., 246, 42-55. https://doi.org/10.1016/j.jmatprotec.2017.03.009.
  19. Won, S., Seo, B., Park, J.M., Kim, H.K., Song, K.H., Min, S.H., ... & Park, K. (2018), "Corrosion behaviors of friction welded dissimilar aluminum alloys", Mater. Characteriz., 144, 652-660. https://doi.org/10.1016/j.matchar.2018.08.014.
  20. Wypych, F., Bergaya, F. and Schoonheydt, R.A. (2018), "From polymers to clay polymer nanocomposites", Develop. Clay Sci., 9, 331-359. https://doi.org/10.1016/B978-0-08-102432-4.00010-X.
  21. Zarghani, F., Mousavizade, S.M., Ezatpour, H.R. and Ebrahimi, G.R. (2018), "High mechanical performance of similar Al joints produced by a novel spot friction welding technique", Vacuum, 147, 172-186. https://doi.org/10.1016/j.vacuum.2017.10.035.