Acknowledgement
This work was supported by a grant from the 2021-2022 Research funds of Andong National University. We appreciate Dr. S. N. Kim in RIST for the EPMA analysis.
References
- P. Dhaiveegan, N. Elangovan, T. Nishimura and N. Najendran, Corrosion behavior of 316L and 304 stainless steels exposed to industrial-marine-urban environment: field study, RSC Advances, 6, 47314 (2016). Doi: https://doi.org/10.1039/C6RA04015B
- R. R. Maller, Passivation of stainless steel, Trends in Food Science & Technology, 9, 28 (1998). Doi: https://doi.org/10.1016/S0924-2244(97)00004-6
- A. H. Tuthill and R. E. Avery, Specifying stainless steel surface treatments, Advanced Materials & Processes, 142, 34 (1992).
- Nickel Development Institute, Design guidelines for the selection and use of stainless steel, A Designers' Handbook series No.9014, p. 5, Nickel Development Institute (2020).
- U. J. Lim, B. D. Yun and H. S. Kim, Effect of sensitization on the corrosion characteristics of STS 304 pipe, Corrosion and Protection, 6, 1 (2007).
- D. Iacoviello, F. Iacoviello and M. Macario, Neural networks application in an AISI 304L intergranular corrosion resistance analysis, La Metallurgia Italiana, 96, 10 (2003).
- C. L. Briant and A. M. Ritter, The effects of deformation induced martensite on the sensitization of austenitic stainless steels, Metallurgical Transactions A, 11A, 2009 (1980). Doi: https://doi.org/10.1007/BF02655120
- F. Iacoviello, V. D. Cocco, and L. D'Agostino, Analysis of the intergranular corrosion susceptibility in stainless steel by means of potentiostatic reactivation tests, Procedia Structural Integrity, 3, 269 (2017). Doi: https://doi.org/10.1016/j.prostr.2017.04.032
- H. P. Kim and D. J. Kim, Intergranular corrosion of stainless steel, Corrosion Science and Technology, 17, 183 (2018). Doi: https://doi.org/10.14773/cst.2018.17.4.183
- A. Joshi and D. F. Stein, Chemistry of grain boundaries and its relation to intergranular corrosion of austenitic stainless steel, Corrosion, 28, 321 (1972). Doi: https://doi.org/10.5006/0010-9312-28.9.321
- S. Lin, W. Bao, J. Gao and J. Wang, Intergranular corrosion of austenitic stainless steel, Applied Mechanics and Materials, 229-231, 14 (2012). Doi: https://doi.org/10.1149/1.2407966
- A. Pardo, M. C. Merino, A. E. Coy, F. Viejo, M. Carboneras, R. Arrabal, Influence of Ti, C and N concentration on the intergranular corrosion behaviour of AISI 316 Ti and 321 stainless steel, Acta Materialia, 55, 7 (2007). Doi: https://doi.org/10.1016/j.actamat.2006.11.021
- M. Zuk, A. Czuprynski, D. Czarnecki and T. Poloczek, The effect of niobium and titanium in base metal and filler metal on intergranular corrosion of stainless steels, Welding Technology Review, 91, 30 (2019). Doi: https://doi.org/10.26628/wtr.v91i6.1032
- E. J. Oh, D. H. Lee, S. W. Cho, W. G. Yi and K. W. Nam, Effect of the holding time during solution heat treatment on intergranular corrosion of unstabilized austenitic stainless steels, Welding and Joining, 38, 278 (2020). Doi: https://doi.org/10.5781/JWJ.2020.38.3.7
- J. Wang, N. Ni, Q. Yan and L. Liu, The effect of solution treatment on intergranular corrosion resistance of a new type ultra low carbon stainless steel, Corrosion Science and Technology, 6, 140 (2007).
- E. J. Oh, J. H. Lee, S. W. Cho, W. G. Yi and K. W. Nam, Effect of carbon content on intergranular corrosion of welding heat affected zone in 304 stainless steel, Welding and Joining, 37, 322 (2019). Doi: https://doi.org/10.5781/JWJ.2019.37.4.6
- ASTM A262, Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels, ASTM (2002).
- N. Parvathavarthini and U. K. Mudali, Electrochemical techniques for estimating the degree of sensitization in austenitic stainless steel, Corrosion Reviews, 32, 183 (2014). Doi: https://doi.org/10.1515/corrrev-2014-0029
- M. Momeni, M. H. Moayed and A. Davoodi, Tuning DOS measuring parameter based on double-loop EPR in H2SO4 containing KSCN by Taguchi method, Corrosion Science, 52, 2653 (2010). Doi: https://doi.org/10.1016/j.corsci.2010.04.015
- M. K. Ahn, J. H. Lee and H. S. Kwon, Modification of electrochemical potentiokinetic reactivation test for detecting the degree of sensitization of alloy 600, Journal of the Corrosion Science Society of Korea, 22, 165 (1993).
- A. V. Bansod, A. P. Patil, A. P. Moon and N. N. Khobragade, Intergranular corrosion behavior of low-nickel and 304 austenitic stainless steel, Journal of Materials Engineering and Performance, 25, 3615 (2016). Doi: https://doi.org/10.1007/s11665-016-2221-2
- S. Rahimi, D. L. Engelberg and T. J. Marrow, A new approach for DL-EPR testing of thermos-mechanically processed austenitic stainless steel, Corrosion Science, 53, 4213 (2011). Doi: https://doi.org/10.1016/j.corsci.2011.08.033
- ISO 12732: 2006, Electrochemical potentiokinetic reactivation measurement using the double loop method, ISO (2006).
- M. A. Streicher, Corrosion tests and standards - application and interpretation, 2nd edition, p. 257, R. Baboian, West Conshohocken, U.S.A., ASTM (2005).
- J. H. Lee, K. T. Kim, Y. S. Pyun, and Y. S. Kim, Intergranular corrosion mechanism of slightly-sensitized and UNSM-treated 316L stainless steel, Corrosion Science and Technology, 15, 226 (2016). Doi: http://dx.doi.org/10.14773/cst.2016.15.5.226