신재생에너지 (New & Renewable Energy)

  • 제18권2호
  • /
  • Pages.73-81
  • /
  • 2022
  • /
  • 1738-3935(pISSN)
  • /
  • 2713-9999(eISSN)
한국신·재생에너지학회 (Korean Society for New and Renewable Energy)
권호 표지
DOI QR코드

DOI QR Code

이상유동 해석을 통한 브레이징 판형 응축기 설계 연구

Design Study of a Brazed Plate Heat Exchanger Condenser Through Two-Phase Flow Analysis

  • Hwang, Dae-jung (Korea Center for International Maritime Safety Cooperation) ;
  • Oh, Cheol (Division of Marine System Engineering, Korea Maritime & Ocean University) ;
  • Park, Sang-kyun (Division of Maritime AI & Cyber Security, Korea Maritime & Ocean University) ;
  • Jee, Jae-hoon (Division of Korea Coast Guard, Mokpo National Maritime University) ;
  • Bang, Eun-shin (Department of Marine Engineering, Korea Maritime & Ocean University) ;
  • Lee, Byeong-gil (Tae Kwang Industries)
  • 투고 : 2022.04.26
  • 심사 : 2022.06.13
  • 발행 : 2022.06.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study was aimed at designing a condenser, as a component of the organic Rankine cycle system for ships. The condenser was manufactured through press molding to achieve a bent shape to enhance the heat transfer performance, considering the shape of the heat transfer plate used in a brazing plate heat exchanger. The heat transfer plate was made of copper-nickel alloy. The required heat transfer rate for the condenser was 110 kW, and the maximum number of layers was set as 25, considering the characteristics of high-temperature brazing. Computational fluid dynamics techniques were used to perform the thermal fluid analysis, based on the ANSYS CFX (v.18.1) commercial program. The heat transfer rate of the condenser was 4.96 kW for one layer (width and length of 0.224 and 0.7 m, respectively) of the heat transfer exchanger. The fin efficiency pertaining to the heat transfer plate was approximately 20%. The heat flow analysis for one layer of the heat exchanger plate indicated that the condenser with 25 layers of heat transfer plates could achieve a heat transfer rate of 110 kW.

키워드

과제정보

이 논문은 2020년도 연구개발특구진흥재단의 재원으로 2021년 연구개발특구육성(R&D)의 지원을 받아 수행된 연구임(2021-BS-RD-0115-01-201).

참고문헌

  1. International maritime organization (IMO), RESOLUTION MEPC.304(72), 2018, "INITIAL IMO STRATEGY ON REDUCTION OF GHG EMISSIONS FROM SHIPS", Adopted on 13 April 2018.
  2. International maritime organization (IMO), RESOLUTION MEPC.328(76), 2021, "AMENDMENTS TO THE ANNEX OF THE PROTOCOL OF 1997 TO AMEND THEINTERNATIONAL CONVENTION FOR THE PREVENTION OF POLLUTION FROM SHIPS, 1973, AS MODIFIED BY THE PROTOCOL OF 1978 RELATING THERETO", Adopted on 17 June 2021.
  3. Yang, H.S., 2020, "Korean shipbuilding industry' revival and strategic response : Focusing on the recent high value-added vessel sector", M.S. thesis, Pukyoung National University, Busan.
  4. KOTRA, "Greek marine heat exchanger market", 2017. 06.12.
  5. Kim, J.K., Kim, Y.T., and Kang, H.G., 2014, "An analysis on the characteristics of superheater organization of ORC system for marine waste heat recovery system (WHRS)", JAMET, 38(1), 8-14. https://doi.org/10.5916/jkosme.2014.38.1.8
  6. Oh, C., and Song, Y.U., 2012, "A study on the ship's ORC power system using seawater temperature difference", J Navig Port Res, 36(5), 349-355. https://doi.org/10.5394/KINPR.2012.36.5.349
  7. Moon, J.M., Lee, H.S., and Seo, J.B., 2021, "Performance analysis of ORC cycle using waste heat", The J. of thr Korean Soc. for Power Syst. Eng., 25(5), 45-50.
  8. Sung, M.J., and Ahn, J., 2013, "Effects of channel aspect ratio on flow and heat transfer characteristics of primary surface heat exchanger for ORC", Korean Society of Computatuonal Fluids Engineering, 18(4), 35-40. https://doi.org/10.6112/kscfe.2013.18.4.035
  9. ANZINE Newsletter, 2017, "Introduction of the definition method of real gas properties using RGP table in CFX program", TAE SUNG S&E Company, 42, 44-46.
  10. Kim, C.D., Park, I.H., and Lee, J.H., 2004, "Prediction and experiment of pressure drop of R22, R407C and R410A on design conditions of condenser", Korean J. Air-Cond. Refrig. Eng., 16(1), 42-53.
  11. Choi, Y.H., Yoon, S.H., Kim, O.J., and Song, C.H., 2015, "Experimental study of the R245fa condensation heat transfer on a single plate heat exchanger for steam generation", Proc. Society of Air-conditioning and refrigerating engineers of Korea, A summer conference, 917-920.