DOI QR코드

DOI QR Code

CFD/RELAP5 coupling analysis of the ISP No. 43 boron dilution experiment

  • Ye, Linrong (State Key Laboratory of Multiphase Flow in Power Engineering, Department of Nuclear Science and Technology, Xi'an Jiaotong University) ;
  • Yu, Hao (State Key Laboratory of Multiphase Flow in Power Engineering, Department of Nuclear Science and Technology, Xi'an Jiaotong University) ;
  • Wang, Mingjun (State Key Laboratory of Multiphase Flow in Power Engineering, Department of Nuclear Science and Technology, Xi'an Jiaotong University) ;
  • Wang, Qianglong (State Key Laboratory of Multiphase Flow in Power Engineering, Department of Nuclear Science and Technology, Xi'an Jiaotong University) ;
  • Tian, Wenxi (State Key Laboratory of Multiphase Flow in Power Engineering, Department of Nuclear Science and Technology, Xi'an Jiaotong University) ;
  • Qiu, Suizheng (State Key Laboratory of Multiphase Flow in Power Engineering, Department of Nuclear Science and Technology, Xi'an Jiaotong University) ;
  • Su, G.H. (State Key Laboratory of Multiphase Flow in Power Engineering, Department of Nuclear Science and Technology, Xi'an Jiaotong University)
  • Received : 2021.03.30
  • Accepted : 2021.07.30
  • Published : 2022.01.25

Abstract

Multi-dimensional coupling analysis is a research hot spot in nuclear reactor thermal hydraulic study and both the full-scale system transient response and local key three-dimensional thermal hydraulic phenomenon could be obtained simultaneously, which can achieve the balance between efficiency and accuracy in the numerical simulation of nuclear reactor. A one-dimensional to three-dimensional (1D-3D) coupling platform for the nuclear reactor multi-dimensional analysis is developed by XJTU-NuTheL (Nuclear Thermal-hydraulic Laboratory at Xi'an Jiaotong University) based on the CFD code Fluent and system code RELAP5 through the Dynamic Link Library (DLL) technology and Fluent user-defined functions (UDF). In this paper, the International Standard Problem (ISP) No. 43 is selected as the benchmark and the rapid boron dilution transient in the nuclear reactor is studied with the coupling code. The code validation is conducted first and the numerical simulation results show good agreement with the experimental data. The three-dimensional flow and temperature fields in the downcomer are analyzed in detail during the transient scenarios. The strong reverse flow is observed beneath the inlet cold leg, causing the de-borated water slug to mainly diffuse in the circumferential direction. The deviations between the experimental data and the transients predicted by the coupling code are also discussed.

Keywords

Acknowledgement

This research has been supported by the National Natural Science Foundation of China (No. 12075185).

References

  1. A. Petruzzi, F. D'Auria, Thermal-hydraulic system codes in nulcear reactor safety and qualification procedures, in: Science and Technology of Nuclear Installations 2008, 2008, p. 460795.
  2. J. Mahaffy, B. Chung, C. Song, F. Dubois, E. Graffard, F. Ducros, M. Heitsch, M. Scheuerer, M. Henriksson, E. Komen, F. Moretti, T. Morii, P. Muehlbauer, U. Rohde, B.L. Smith, T. Watanabe, G. Zigh, Best Practice Guidelines for the Use of CFD in Nuclear Reactor Safety Applications, Nuclear Energy Agency of the OECD (NEA), 2007, p. 166.
  3. D. Bestion, System Code Models and Capabilities, Thicket-2008, Italy, 2008, p. 486.
  4. A. Papukchiev, M. Jeltsov, K. Koop, P. Kudinov, G. Lerchl, Comparison of different coupling CFDeSTH approaches for pre-test analysis of a TALL-3D experiment, Nucl. Eng. Des. 290 (2015) 135-143. https://doi.org/10.1016/j.nucengdes.2014.11.008
  5. D. Aumiller, E. Tomlinson, R.J.N.E. Bauer, Design, in: A Coupled RELAP5-3D/CFD Methodology with a Proof-Of-Principle Calculation, vol. 205, 2001, pp. 83-90.
  6. D.L. Aumiller, E.T. Tomlinson, W.L. Weaver, An integrated relap5-3d and multiphase cfd code system utilizing a semi-implicit coupling technique, Nucl. Eng. Des. 216 (2002) 77-87. https://doi.org/10.1016/S0029-5493(01)00522-2
  7. A. Papukchiev, G. Lerchl, C. Waata, T.J.P.o.N. Frank, Extension of the Simulation Capabilities of the 1D System Code ATHLET by Coupling with the 3D CFD Software Package ANSYS CFX, 2009.
  8. T. Grunloh, A. Manera, Comparison of overlapping and separate domain coupling methods, in: NURETH-16: 16th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, 2015.
  9. N. Anderson, Y. Hassan, R. Schultz, Analysis of the hot gas flow in the outlet plenum of the very high temperature reactor using coupled RELAP5-3D system code and a CFD code, Nucl. Eng. Des. 238 (2008) 274-279. https://doi.org/10.1016/j.nucengdes.2007.06.008
  10. R. Baviere, N. Tauveron, F. Perdu, E. Garre, S. Li, A first system/CFD coupled simulation of a complete nuclear reactor transient using CATHARE2 and TRIO_U. Preliminary validation on the Phenix Reactor Natural Circulation Test, Nucl. Eng. Des. 277 (2014) 124-137. https://doi.org/10.1016/j.nucengdes.2014.05.031
  11. D. Pialla, D. Tenchine, S. Li, P. Gauthe, A. Vasile, R. Baviere, N. Tauveron, F. Perdu, L. Maas, F. Cocheme, K. Huber, X. Cheng, Overview of the system alone and system/CFD coupled calculations of the PHENIX Natural Circulation Test within the THINS project, Nucl. Eng. Des. 290 (2015) 78-86. https://doi.org/10.1016/j.nucengdes.2014.12.006
  12. M. Wang, Y. Wang, W. Tian, S. Qiu, G.H. Su, Recent progress of CFD applications in PWR thermal hydraulics study and future directions, Ann. Nucl. Energy 150 (2021) 107836. https://doi.org/10.1016/j.anucene.2020.107836
  13. W. Li, X. Wu, D. Zhang, G. Su, W. Tian, S. Qiu, Preliminary study of coupling CFD code FLUENT and system code RELAP5, Ann. Nucl. Energy 73 (2014) 96-107. https://doi.org/10.1016/j.anucene.2014.06.042
  14. T. Feng, D. Zhang, P. Song, W. Tian, W. Li, G.H. Su, S. Qiu, Numerical research on water hammer phenomenon of parallel pump-valve system by coupling FLUENT with RELAP5, Ann. Nucl. Energy 109 (2017) 318-326. https://doi.org/10.1016/j.anucene.2017.05.049
  15. H. Yu, H. Ju, M. Wang, J. Zhang, S. Qiu, W. Tian, G.H. Su, Study of boron diffusion models and dilution accidents in nuclear reactor: a comprehensive review, Ann. Nucl. Energy 148 (2020) 107659. https://doi.org/10.1016/j.anucene.2020.107659
  16. M. Gavrilas, K. Kiger, International standard problem (ISP) No. 43 rapid boron dilution transient tests for code verification, in: Nucl. Energy Agency Comparison Report NEA/CSNI, 2001. NEA/CSNI/R(2000)22.
  17. R.C. Jones, Boron Dilution Reactivity Transients A Regulatory Perspective, Nuclear Energy Agency of the OECD (NEA), 1996, pp. 24-28.
  18. H. Prasser, G. Grunwald, T. Hohne, S. Kliem, U. Rohde, F.J.N.T. Weiss, Coolant Mixing in a PWR-Deboration Transients, Steam Line Breaks and Emergency Core Cooling Injection-Experiments and Analyses, vol. 143, 2003, pp. 37-56.
  19. B.J. Daly, Three-dimensional Calculations of Transient Fluid-Thermal Mixing in the Downcomer of the Calvert Cliffs-1 Plant Using SOLA-PTS, Los Alamos National Lab, 1984.
  20. J. Li, M. Wang, D. Fang, J. Wang, D. Liu, W. Tian, S. Qiu, G.H. Su, CFD simulation on the transient process of coolant mixing phenomenon in reactor pressure vessel, Ann. Nucl. Energy 153 (2021).
  21. V.H. Ransom, J. Trapp, R. Wagner, RELAP5/MOD3. 3 Code Manual Volume IV: Models and Correlations NUREG/CR-5535/Rev 1, Idaho National Engineering Laboratory, 2001.
  22. A. Tanrikut, O. Yesin, In-tube steam condensation in the presence of air under transient conditions, in: Office of Nuclear Regulatory Research, US Nuclear Regulatory Commission, 2007. NUREG/IA-0210.
  23. H. Yu, M. Wang, R. Cai, D. Zhang, W. Tian, S. Qiu, G.H. Su, Development and validation of boron diffusion model in nuclear reactor core subchannel analysis, Ann. Nucl. Energy 130 (2019) 208-217. https://doi.org/10.1016/j.anucene.2019.02.046