Structural Engineering and Mechanics

  • 제82권6호
  • /
  • Pages.785-799
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Estimation of seismic effective energy based parameter

  • Nemutlu, Omer Faruk (Civil Engineering Department, Faculty of Civil Engineering, Istanbul Technical University) ;
  • Sari, Ali (Civil Engineering Department, Faculty of Civil Engineering, Istanbul Technical University) ;
  • Balun, Bilal (Architecture Department, Faculty of Engineering and Architecture, Bingol University)
  • 투고 : 2022.03.06
  • 심사 : 2022.04.23
  • 발행 : 2022.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

The effect of earthquakes in earthquake resistant structure design stages is influenced by the highest ground acceleration value, which is generally a strength-based approach in seismic codes. In this context, an energy-oriented approach can be suggested as an alternative to evaluate structure demands. Contrary to the strength-based approach, the strength and displacement demands of the structure cannot be evaluated separately, but can be evaluated together. In addition, in the energy-oriented approach, not only the maximum effects of earthquakes are taken into account, but also the duration of the earthquake. In this respect, it can be said that the use of energy-oriented earthquake parameters is a more rational approach besides being an alternative. In this study, strength and energy-oriented approaches of earthquake parameters of 11 different periods of single degree of freedom systems were evaluated over 28 different earthquake situations. The energy spectra intended to be an alternative to the traditional acceleration spectra were created using the acceleration parameter equivalent to the input energy. Two new energy parameters, which take into account the effective duration of the earthquake, are proposed, and the relationship between the strength-oriented spectral acceleration parameters and the energy parameters used in the literature is examined by correlation study. According to the results obtained, it has been seen that energy oriented earthquake parameters, which give close values in similar period situations, will be a good alternative to strength oriented earthquake parameters. It was observed that the energy parameters were affected by the effective duration of the earthquake, unlike the strength-based parameters. It has been revealed that the newly proposed energy parameters considering the effective duration give good correlations. Finally, it was concluded that the energy parameters can be used in the design, and the newly proposed effective energy parameters can shorten the analysis durations.

키워드

과제정보

This paper was produced from the Ph.D. thesis study conducted in the Structural Engineering Ph.D. program of Istanbul Technical University.

참고문헌

  1. Akbas, B. (1998), "Energy-based earthquake resistant design of steel moment resisting frames", Illinois Institute of Technology.
  2. Akbas, B. and Shen, J. (2003), "Earthquake resistant design and energy concepts", Tech. J., Turkish Chamb. Civil Eng., 14(2), 2877-2901.
  3. Akbas, B., Shen, J. and Hao, H. (2001), "Energy approach in performance-based seismic design of steel moment resisting frames for basic safety objective", Struct. Des. Tall Build., 10(3), 193-217. https://doi.org/10.1002/tal.172.
  4. Arias, A. (1970), A Measure of Earthquake Intensity, Seismic Design for Nuclear Power Plants, MIT Press, Cambridge, Massachussetts.
  5. Benavent-Climent, A., Lopez-Almansa, F. and Bravo-Gonzalez, D.A. (2010), "Design energy input spectra for moderate-to-high seismicity regions based on Colombian earthquakes", Soil Dyn. Earthq. Eng., 30(11), 1129-1148. https://doi.org/10.1016/j.soildyn.2010.04.022.
  6. Benavent-Climent, A., Pujades, L.G. and Lopez-Almansa, F. (2002), "Design energy input spectra for moderate-seismicity regions", Earthq. Eng. Struct Dyn., 31(5), 1151-1172. https://doi.org/10.1002/eqe.153.
  7. Bissell, D., Ang, A.H.S. and Tang, W.H. (1979), Probability Concepts in Engineering Planning and Design: Vol. I-Basic Principles, The Statistician.
  8. Bradley, B.A. (2015), "Correlation of Arias intensity with amplitude, duration and cumulative intensity measures", Soil Dyn. Earthq. Eng., 78, 89-98. https://doi.org/10.1016/j.soildyn.2015.07.009.
  9. Chandramohan, R., Baker, J.W. and Deierlein, G.G. (2016), "Quantifying the influence of ground motion duration on structural collapse capacity using spectrally equivalent records", Earthq. Spectra, 32(2), 927-950. https://doi.org/10.1193/122813eqs298mr2.
  10. Chou, C.C. and Uang, C.M. (2000), "An evaluation of seismic energy demand: An attenuation approach", PEER Report, 6-20.
  11. Chou, C.C. and Uang, C.M. (2000), "Establishing absorbed energy spectra-an attenuation approach", Earthq. Eng. Struct Dyn., 29, 1441-1455. https://doi.org/10.1002/1096-9845(200010)29:10<1441::AID-EQE967>3.0.CO;2-E.
  12. De Jesus Vega, E. and Montejo, L.A. (2019), "Influence of ground motion duration on ductility demands of reinforced concrete structures", Int. J. Adv. Struct. Eng., 11(4), 503-517. https://doi.org/10.1007/s40091-019-00249-3.
  13. DEMA (2018), Turkish Earthquake Code-2018 (TEC-2018).
  14. Departamento de Geofisica, Universidad de Chile (2006), "Estudio de la Variabilidad Climatica en Chile para el Siglo XXI", Comision Nacional del Medio Ambiente de Chile.
  15. Dindar, A.A., Yalcin, C., Yuksel, E., Ozkaynak, H. and Buyukozturk, O. (2015), "Development of earthquake demand spectra", Earthq. Spectra, 31(3), 1667-1689. https://doi.org/10.1193/011212EQS010M.
  16. Enderami, S.A., Beheshti-Aval, S.B. and Saadeghvaziri, M.A. (2014), "New energy based approach to predict seismic demands of steel moment resisting frames subjected to near-fault ground motions", Eng. Struct., 72, 182-192. https://doi.org/10.1016/j.engstruct.2014.04.029.
  17. Fahraz, T.F. and Hall, W.J. (1982), "Seismic energy absorption in simple structures", University of Illinois Engineering Experiment Station, College of Engineering, University of Illinois at Urbana-Champaign.
  18. Fajfar, P. and Vidic, T. (1994), "Consistent inelastic design spectra: Hysteretic and input energy", Earthq. Eng. Struct. Dyn., 23(5), 523-537. https://doi.org/10.1002/eqe.4290230505.
  19. Housner, G.W. (1952), "Spectrum intensities of strong-motion earthquakes", Symposium on Earthquake and Blast Effectrs on Structures.
  20. Housner, G.W. (1956), "Limit design of structures", Proceedings of the 1th World Conference on Earthquake Engineering, Oakland, California, USA.
  21. International Building Code 2018 (IBC-2018) (2018), International Code Council.
  22. Lopez-Almansa, F., Yazgan, A.U. and Benavent-Climent, A. (2013), "Design energy input spectra for high seismicity regions based on Turkish registers", Bull. Earthq. Eng., 11(4), 885-912. https://doi.org/10.1007/s10518-012-9415-2.
  23. Merter, O. (2019), "A study on elastic input energy spectra for actual earthquake ground motions at stiff soil sites", 7th COMPDYN Proceedings, Greece, June.
  24. Merter, O. (2019), "An investigation on the maximum earthquake input energy for elastic SDOF systems", Earthq. Struct., 16(4), 487-499. https://doi.org/10.12989/eas.2019.16.4.487.
  25. Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-16) (2017), American Society of Civil Engineers.
  26. Nemutlu, O. F., Sari, A. and Balun, B. (2021), "Investigation of acceleration and energy-oriented earthquake parameters in SDOF systems", 3rd International Symposium of Engineering Applications on Civil Engineering and Earth Sciences, 111-120.
  27. NIED K-NET KiK-net (2019), K-NET, KiK-net, National Research Institute for Earth Science and Disaster Resilience.
  28. Ozbey, C., Sari, A., Manuel, L., Erdik, M. and Fahjan, Y. (2004), "An empirical attenuation relationship for Northwestern Turkey ground motion using a random effects approach", Soil Dyn. Earthq. Eng., 24(2), 115-125. https://doi.org/10.1016/j.soildyn.2003.10.005.
  29. Ozsarac, V., Karimzadeh, S., Erberik, M.A. and Askan, A. (2017), "Energy-based response of simple structural systems by using simulated ground motions", Procedia Eng., 199, 236-241. https://doi.org/10.1016/j.proeng.2017.09.009.
  30. Pawirodikromo, W. (2019), "The effects of earthquake significant duration D595 to the earthquake intensity measures and the inelastic response of SDOF reinforced concrete structure", MATEC Web of Conferences, 280, 01005.
  31. PEER (2021), Pacific Engineering Research Center Strong Ground Motion Database. http://ngawest2.berkeley.edu.
  32. Pelaez, J.A., Delgado, J. and Lopez Casado, C. (2005), "A preliminary probabilistic seismic hazard assessment in terms of Arias intensity in southeastern Spain", Eng. Geol., 77(1-2), 139-151. https://doi.org/10.1016/j.enggeo.2004.09.002.
  33. Sandikkaya, M.A. and Akkar, S. (2017), "Cumulative absolute velocity, Arias intensity and significant duration predictive models from a pan-European strong-motion dataset", Bull. Earthq. Eng., 15(5), 1881-1898. https://doi.org/10.1007/s10518-016-0066-6.
  34. Sari, A. (2003), "Energy considerations in ground motion attenuation and probabilistic seismic hazard studies", University of Texas at Austin, USA.
  35. Sari, A. and Manuel, L. (2021), "Attenuation of energy-based demand parameters", Bull. Earthq. Eng., 1-50.
  36. SeismoSoft (2021), SeismoSignal-Signal Processing of Strong Motion Data. www.seismosoft.com.
  37. The Mathworks Inc. (2019), MATLAB (R2019a), The MathWorks Inc.
  38. Uang, C.M, and Bertero, V.V. (1990), "Evaluation of seismic energy in structures", Earthq. Eng. Struct. Dyn., 19(1), 77-90. https://doi.org/10.1002/eqe.4290190108.
  39. Ucar, T. and Merter, O. (2017), "Dogrusal olmayan tek serbestlik dereceli sisteme giren enerjinin periyot ve suneklik oranina bagli degisimi", 4th ICEES Eskisehir, Turkey.
  40. Ucar, T. and Merter, O. (2018a), "Ductility effect on inelastic input energy spectra", 13th International Congress on Advances in Civil Engineering, September.
  41. Ucar, T. and Merter, O. (2018b), "Hysteretic energy demand in SDOF structures subjected to an earthquake excitation: analytical and empirical results", Suleyman Demirel Universitesi Fen Bilimleri Enstitusu Dergisi, 22(2), 364-374. https://doi.org/10.19113/sdufbed.84512.
  42. Ucar, T., Merter, O. and Duzgun, M. (2012), "A study on determination of target displacement of RC frames using PSV spectrum and energy-balance concept", Struct. Eng. Mech., 41(6), 759-773. https://doi.org/10.12989/sem.2012.41.6.759.
  43. Ulker, M. and Savas, S. (2018), "Aisc 360-10 ve turk deprem yonetmeligine gore celik yapilarin tasarimi", Firat Universitesi Muhendislik Bilimleri Dergisi, 30(1), 21-32.
  44. Yuksel, E. and Yalcin, C. (2018), "Seismic energy based design: numerical evaluation of diverse MDOF systems", 16th European Conference on Earthquake Engineering, Thessaloniki, Greece, June.
  45. Zahrah, T.F. and Hall, W.J. (2011), "Seismic energy absorption in simple structures", University of Illinois Engineering Experiment Station, College of Engineering, University of Illinois at Urbana-Champaign.