Advances in nano research

  • 제12권6호
  • /
  • Pages.549-566
  • /
  • 2022
  • /
  • 2287-237X(pISSN)
  • /
  • 2287-2388(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effects of mining activities on Nano-soil management using artificial intelligence models of ANN and ELM

  • Liu, Qi (School of Resources and Safety Engineering, Central South University) ;
  • Peng, Kang (School of Resources and Safety Engineering, Central South University) ;
  • Zeng, Jie (School of Traffic and Municipal Engineering, Chongqing Jianzhu College) ;
  • Marzouki, Riadh (Chemistry Department, College of Science, King Khalid University) ;
  • Majdi, Ali (Air conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College) ;
  • Jan, Amin (Faculty of hospitality, Tourism and Wellness, Universiti Malaysia Kelantan, City Campus) ;
  • Salameh, Anas A. (Department of Management Information Systems, College of Business Administration, Prince Sattam Bin Abdulaziz University) ;
  • Assilzadeh, Hamid (Department of Biomaterials, Saveetha Dental College and Hospital, Saveetha Institute of Medical and Technical Sciences)
  • 투고 : 2021.05.19
  • 심사 : 2022.03.01
  • 발행 : 2022.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Mining of ore minerals (sfalerite, cinnabar, and chalcopyrite) from the old mine has led in significant environmental effects as contamination of soils and plants and acidification of water. Also, nanoparticles (NP) have obtained global importance because of their widespread usage in daily life, unique properties, and rapid development in the field of nanotechnology. Regarding their usage in various fields, it is suggested that soil is the final environmental sink for NPs. Nanoparticles with excessive reactivity and deliverability may be carried out as amendments to enhance soil quality, mitigate soil contaminations, make certain secure land-software of the traditional change substances and enhance soil erosion control. Meanwhile, there's no record on the usage of Nano superior substances for mine soil reclamation. In this study, five soil specimens have been tested at 4 sites inside the region of mine (<100 m) to study zeolites, and iron sulfide nanoparticles. Also, through using Artificial Neural Network (ANN) and Extreme Learning Machine (ELM), this study has tried to appropriately estimate the mechanical properties of soil under the effect of these Nano particles. Considering the RMSE and R2 values, Zeolite Nano materials could enhance the mine soil fine through increasing the clay-silt fractions, increasing the water holding capacity, removing toxins and improving nutrient levels. Also, adding iron sulfide minerals to the soils would possibly exacerbate the soil acidity problems at a mining site.

키워드

과제정보

The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University for funding this work through group research program under grant number RGP1/157/42.

참고문헌

  1. Abdolrahim, J. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061- 4072. http://doi.org/10.5897/ijps11.1324.
  2. Adamian, A., Hosseini Safari, K., Sheikholeslami, M., Habibi, M., Al-Furjan, M.S.H. and Chen, G. (2020), "Critical temperature and frequency characteristics of GPLs-reinforced composite doubly curved panel", Appl. Sci., 10(9), 3251. https://doi.org/10.3390/app10093251
  3. Adu-Gyamfi, E. (2014), "Effective revenue mobilisation by districts assemblies: A case study of Upper Denkyira East Municipal Assembly of Ghana", Public Policy Admin. Rev., 2(1), 97-122.
  4. Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A. and Shokrgozar, A. (2020), "Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives", Constr. Build. Mater., 262, 120034. http://doi.org/ARTN12003410.1016/j.conbuildmat.2020.120034.
  5. Aghakhani, M., Suhatril, M., Mohammadhassani, M., Daie, M. and Toghroli, A. (2015), "A simple modification of homotopy perturbation method for the solution of Blasius equation in semi-infinite domains", Math. Probl. Eng., 2015. https://doi.org/10.1155/2015/671527.
  6. Akter, F., Tinni, H.H., Banarjee, P. and Hossain, M.Z. (2019), "Effects of heavy metals (Cd, Zn And Cu) on carbon, nitrogen and iron mineralization in soil", Malaysian J. Sust. Agric., 3(1), 33-38. http://doi.org/10.26480/mjsa.01.2019.33.38.
  7. Al-Furjan, M.S.H., Dehini, R., Khorami, M., Habibi, M. and won Jung, D. (2021a), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 255, 112990. https://doi.org/10.1016/j.compstruct.2020.112990.
  8. Al-Furjan, M.S.H., Fereidouni, M., Habibi, M., Abd Ali, R., Ni, J. and Safarpour, M. (2020a), "Influence of in-plane loading on the vibrations of the fully symmetric mechanical systems via dynamic simulation and generalized differential quadrature framework", Eng. Comput. http://doi.org/10.1007/s00366-020-01177-7.
  9. Al-Furjan, M.S.H., Fereidouni, M., Sedghiyan, D., Habibi, M. and Jung, D.W. (2021b), "Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses", Compos. Struct., 257, 113146. https://doi.org/10.1016/j.compstruct.2020.113146.
  10. Al-Furjan, M.S.H., Moghadam, S.A., Dehini, R., Shan, L., Habibi, M. and Safarpour, H. (2021c), "Vibration control of a smart shell reinforced by graphene nanoplatelets under external load: Semi-numerical and finite element modeling", Thin Wall. Struct., 159, 107242. https://doi.org/10.1016/j.tws.2020.107242.
  11. Al-Furjan, M.S.H., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020b), "Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via two-dimensional analysis", Thin Wall. Struct., 157, 107111. https://doi.org/10.1016/j.tws.2020.107111.
  12. Al-Furjan, M.S.H., Samimi-Sohrforozani, E., Habibi, M., Jung, D.W. and Safarpour, H. (2021d), "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., 257, 113152. https://doi.org/10.1016/j.compstruct.2020.113152.
  13. Ali, S. (2012), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831. http://doi.org/10.5897/ijps11.1604.
  14. Alipour, M., Torabi, M.A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., Habibi, M. and Hashemi, R. (2020), "Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels", Mech. Based Des. Struct., 48(5), 525-541. http://doi.org/10.1080/15397734.2019.1633343.
  15. Alissa, E.M. and Ferns, G.A. (2011), "Heavy metal poisoning and cardiovascular disease", J. Toxicol., 2011, 870125. http://doi.org/10.1155/2011/870125.
  16. Amadu, C.C., Foli, G., Kissi-Abrokwa, B. and Akpah, S. (2021), "Geostatistical approach for the estimation of shear-hosted gold deposit: A case study of the obuasi gold deposit, Ghana", Malaysian J. Geosci., 5(2), 76-84.
  17. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010a), "Behavior of through beam connections composed of cfsst columns and steel beams by finite element studying", Adv. Mater. Res., 168-170, 2329-2333. http://doi.org/10.4028/www.scientific.net/AMR.168-170.2329.
  18. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010b), "Investigation of seismic behaviour of Composite Structure with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel and Composite Structure, 20010, 21-23.
  19. Arif, N., Yadav, V., Singh, S., Singh, S., Ahmad, P., Mishra, R.K., Sharma, S., Tripathi, D.K., Dubey, N.K. and Chauhan, D.K. (2016), "Influence of high and low levels of plant-beneficial heavy metal ions on plant growth and development", Front. Environ. Sci., 4. https://doi.org/10.3389/fenvs.2016.00069.
  20. Asadolahi, S. M. and Fanaie, N. (2020), "Performance of selfcentering steel moment frame considering stress relaxation in prestressed cables", Adv. Struct. Eng., 23(9), 1813-1822. http://doi.org/Artn1369433219900940. https://doi.org/10.1177/1369433219900940
  21. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Seminumerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comput., 1-26. http://doi.org/10.1007/s00366-020-01191-9.
  22. Capeness, M.J., Echavarri-Bravo, V. and Horsfall, L.E. (2019), "Production of biogenic nanoparticles for the reduction of 4- nitrophenol and oxidative laccase-like reactions", Front. Microbiol., 10. https://doi.org/10.3389/fmicb.2019.00997.
  23. Chaplygin, V.A., Minkina, T.M., Mandzhieva, S.S., Nazarenko, O.G., Zimulina, I.V., Bauer, T.V., Litvinov, Y.A. and Rajput, V. (2021), "Heavy metals in agricultural crops of Rostov region through the example of soft wheat (Triticum aestivum)," IOP Conf. Earth Environ. Sci., 624(1), 012204. http://doi.org/10.1088/1755-1315/624/1/012204.
  24. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection-A review", Steel Compos. Struct., 30(5), 457-569. https://doi.org/10.12989/scs.2019.30.5.457.
  25. Chen, F., Chen, J., Duan, R., Habibi, M. and Khadimallah, M. A. (2022), "Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle", Compos. Struct., 284, 115195. https://doi.org/10.1016/j.compstruct.2022.115195.
  26. Chen, P., Zeng, Q., Guo, W. and Chen, J. (2021), "The source, enrichment and precipitation of ore-forming elements for porphyry Mo deposit: Evidences from melt inclusions, biotite and fluorite in Dasuji deposit, China", Ore Geol. Rev., 135, 104205. https://doi.org/10.1016/j.oregeorev.2021.104205.
  27. Cheshmeh, E., Karbon, M., Eyvazian, A., Jung, D.W., Habibi, M. and Safarpour, M. (2022), "Buckling and vibration analysis of FG-CNTRC plate subjected to thermo-mechanical load based on higher order shear deformation theory", Mech. Based Des. Struct., 50(4), 1137-1160. http://doi.org/10.1080/15397734.2020.1744005.
  28. Colella, C. (1996), "Ion exchange equilibria in zeolite minerals", Mineralium Deposita, 31(6), 554-562. http://doi.org/ 10.1007/BF00196136.
  29. Crowley, D. (2008), "Impacts of metals and metalloids on soil microbial diversity and ecosystem function", Revista de la Ciencia del Suelo y Nutricion Vegetal, 8, 6-11 http://doi.org/10.4067/S0718-27912008000400003.
  30. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021a), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., 10(2), 175-189. http://doi.org/10.12989/ANR.2021.10.2.175.
  31. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021b), "On the vibrations of the non-polynomial viscoelastic composite opentype shell under residual stresses", Compos. Struct., 263, 113599. https://doi.org/10.1016/j.compstruct.2021.113599.
  32. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., 30(2), 141-147. http://doi.org/10.12989/scs.2019.30.2.141.
  33. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2021), "Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method", Steel Compos. Struct., 40(6), 853-868. http://doi.org/10.12989/scs.2021.40.6.853.
  34. Dong, J., Deng, R., Quanying, Z., Cai, J., Ding, Y. and Li, M. (2021), "Research on recognition of gas saturation in sandstone reservoir based on capture mode", Appl. Radiat. Isotopes, 178, 109939. https://doi.org/10.1016/j.apradiso.2021.109939.
  35. Ebrahimi, F., Habibi, M. and Safarpour, H. (2019), "On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell", Eng. Comput., 35(4), 1375-1389. http://doi.org/10.1007/s00366-018-0669-4.
  36. Ebrahimi, F., Hashemabadi, D., Habibi, M. and Safarpour, H. (2020), "Thermal buckling and forced vibration characteristics of a porous GNP reinforced nanocomposite cylindrical shell", Microsyst. Technol., 26(2), 461-473. http://doi.org/10.1007/s00542-019-04542-9.
  37. Ebrahimi, F., Mohammadi, K., Barouti, M.M. and Habibi, M. (2021), "Wave propagation analysis of a spinning porous graphene nanoplatelet-reinforced nanoshell", Wave. Random Complex Med., 31(6), 1655-1681. http://doi.org/10.1080/17455030.2019.1694729.
  38. Enez, A., Hudek, L. and Brau, L. (2018), "Reduction in trace element mediated oxidative stress towards cropped plants via beneficial microbes in irrigated cropping systems: A review", Appl. Sci., 8(10), 1953. https://doi.org/10.3390/app8101953.
  39. Esmailpoor Hajilak, Z., Pourghader, J., Hashemabadi, D., Sharifi Bagh, F., Habibi, M. and Safarpour, H. (2019), "Multilayer GPLRC composite cylindrical nanoshell using modified strain gradient theory", Mech. Based Des. Struct., 47(5), 521-545. http://doi.org/10.1080/15397734.2019.1566743.
  40. Evanko, C.R. and Dzombak, D.A. (1997), Remediation of Metals-Contaminated Soils and Groundwater, Ground-Water Remediation Technologies Analysis Center Pittsburgh, Pensivenia, U.S.A.
  41. Eyde, T. (2010), "Zeolites", Mining Eng., 62(6), 86-87.
  42. Fan, C., Li, H., Qin, Q., He, S. and Zhong, C. (2020), "Geological conditions and exploration potential of shale gas reservoir in Wufeng and Longmaxi Formation of southeastern Sichuan Basin, China", J. Petrol. Sci. Eng., 191, 107138. https://doi.org/10.1016/j.petrol.2020.107138.
  43. Fanaie, N., Kazerani, S. and Soroushnia, S. (2017a), "Numerical study of slotted web drilled flange moment frame connection", Int. J. Numer. Meth. Civil Eng., 1(3), 16-23.
  44. Fanaie, N. and Tahriri, M. (2017b), "Stability and stiffness analysis of a steel frame with an oblique beam using method of least work", J. Constr. Steel Res., 137, 342-357. https://doi.org/10.1016/j.jcsr.2017.06.032.
  45. Feng, G., Qian, Z. and Zhang, X. (2012), "Evolutionary selection extreme learning machine optimization for regression", Soft Comput., 16(9), 1485-1491. http://doi.org/10.1007/s00500-012-0823-7.
  46. Fernandez, F.G. and Hoeft, R.G. (2009), "Managing soil pH and crop nutrients", Illinois Agronomy Handbook, 24, 91-112.
  47. Fordyce, F.M., Everett, P.A., Bearcock, J.M. and Lister, T.R. (2017), "Soil metal/metalloid concentrations in the Clyde Basin, Scotland, UK: implications for land quality", Earth Environ. Sci. Transact. Royal Soc. Edinburgh, 108(2-3), 191-216. http://doi.org/10.1017/S1755691018000282.
  48. Gairhe, J., Khanal, S. and Thapa, S. (2021), "Soil organic matter (Som): Status, target and challenges in Nepal", Malaysian J. Sust. Agric., 5(2), 90-94. https://doi.org/10.26480/mjsa.02.2021.90.94
  49. Gerhardt, K.E., Gerwing, P.D. and Greenberg, B.M. (2017), "Opinion: Taking phytoremediation from proven technology to accepted practice", Plant Sci., 256, 170-185. https://doi.org/10.1016/j.plantsci.2016.11.016.
  50. Ghanbari-Ghazijahani, T., Nabati, A., Azandariani, M. G. and Fanaie, N. (2020), "Crushing of steel tubes with different infills under partial axial loading", Thin Wall. Struct., 149, 106614. http://doi.org/ARTN10661410.1016/j.tws.2020.106614.
  51. Ghazanfari, A., Soleimani, S. S., Keshavarzzadeh, M., Habibi, M., Assempuor, A. and Hashemi, R. (2020), "Prediction of FLD for sheet metal by considering through-thickness shear stresses", Mech. Based Des. Struct., 48(6), 755-772. http://doi.org/10.1080/15397734.2019.1662310.
  52. Gorovtsov, A., Demin, K., Sushkova, S., Minkina, T., Grigoryeva, T., Dudnikova, T., Barbashev, A., Semenkov, I., Romanova, V., Laikov, A., Rajput, V. and Kocharovskaya, Y. (2022), "The effect of combined pollution by PAHs and heavy metals on the topsoil microbial communities of Spolic Technosols of the lake Atamanskoe, Southern Russia", Environ. Geochem. Health., 44(4), 1299-1315. http://doi.org/10.1007/s10653-021-01059-x.
  53. Guo, J., Baharvand, A., Tazeddinova, D., Habibi, M., Safarpour, H., Roco-Videla, A. and Selmi, A. (2021a), "An intelligent computer method for vibration responses of the spinning multilayer symmetric nanosystem using multi-physics modeling", Eng. Comput., 1-22. http://doi.org/10.1007/s00366-021-01433-4.
  54. Guo, Y., Mi, H. and Habibi, M. (2021b), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Syst. Signal Pr., 157, 107723. https://doi.org/10.1016/j.ymssp.2021.107723.
  55. Habibi, M., Darabi, R., Sa, J.C.D. and Reis, A. (2021a), "An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 235(8), 1937-1951. http://doi.org/10.1177/14644207211024686.
  56. Habibi, M., Ghazanfari, A., Assempour, A., Naghdabadi, R. and Hashemi, R. (2017), "Determination of forming limit diagram using two modified finite element models", Mech. Eng., 48(4), 141-144.
  57. Habibi, M., Hashemabadi, D. and Safarpour, H. (2019a), "Vibration analysis of a high-speed rotating GPLRC nanostructure coupled with a piezoelectric actuator", Eur. Phys. J. Plus, 134(6), 307. http://doi.org/10.1140/epjp/i2019-12742-7.
  58. Habibi, M., Hashemi, R., Fallah Tafti, M. and Assempour, A. (2018), "Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding", J. Manuf. Proc., 31, 310-323. https://doi.org/10.1016/j.jmapro.2017.11.009.
  59. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2016a), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(8), 625-636. http://doi.org/10.1177/1464420716642258.
  60. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016b), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Perform., 25(2), 382-389. http://doi.org/10.1007/s11665-016-1882-1.
  61. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019b), "Wave propagation characteristics of the electrically GNPreinforced nanocomposite cylindrical shell", J. Brazil. Soc. Mech. Sci. Eng.,41(5), 221. http://doi.org/10.1007/s40430-019-1715-x.
  62. Habibi, M., Mohammadi, A., Safarpour, H. and Ghadiri, M. (2021b), "Effect of porosity on buckling and vibrational characteristics of the imperfect GPLRC composite nanoshell", Mech. Based Des. Struct., 49(6), 811-840. http://doi.org/10.1080/15397734.2019.1701490.
  63. Habibi, M., Mohammadi, A., Safarpour, H., Shavalipour, A. and Ghadiri, M. (2021c), "Wave propagation analysis of the laminated cylindrical nanoshell coupled with a piezoelectric actuator", Mech. Based Des. Struct., 49(5), 640-658. http://doi.org/10.1080/15397734.2019.1697932.
  64. Habibi, M., Safarpour, M. and Safarpour, H. (2020), "Vibrational characteristics of a FG-GPLRC viscoelastic thick annular plate using fourth-order Runge-Kutta and GDQ methods", Mech. Based Des. Struct., 1-22. http://doi.org/10.1080/15397734.2020.1779086.
  65. Habibi, M., Taghdir, A. and Safarpour, H. (2019c), "Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets", Compos. Part B Eng., 175, 107125. https://doi.org/10.1016/j.compositesb.2019.107125.
  66. Haggerty, G.M. and Bowman, R.S. (1994), "Sorption of chromate and other inorganic anions by organo-zeolite", Environ. Sci. Technol., 28(3), 452-458 http://doi.org/10.1021/es00052a017.
  67. Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081.
  68. Hashemi, H.R., Alizadeh, A.A., Oyarhossein, M.A., Shavalipour, A., Makkiabadi, M. and Habibi, M. (2021), "Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure", Wave. Random Complex Med., 31(6), 1340-1366. http://doi.org/10.1080/17455030.2019.1662968.
  69. He, X., Ding, J., Habibi, M., Safarpour, H. and Safarpour, M. (2021), "Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate", Thin Wall. Struct., 166, 108019. https://doi.org/10.1016/j.tws.2021.108019.
  70. Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium", Struct. Eng. Mech., 66(6), 737-748. http://doi.org/10.12989/sem.2018.66.6.737.
  71. Hosseini, S.A. and Toghroli, A. (2021), "Effect of mixing Nanosilica and Perlite with pervious concrete for nitrate removal from the contaminated water", Adv. Concrete Constr., 11(6), 531-544. https://doi.org/10.12989/acc.2021.11.6.531.
  72. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., 26(4), 485-499. http://doi.org/10.12989/scs.2018.26.4.485.
  73. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comput. https://doi.org/10.1007/s00366-021-01456-x.
  74. Huang, C.C., Liang, C.M., Yang, T.I., Chen, J.L. and Wang, W.K. (2021a), "Shift of bacterial communities in heavy metalcontaminated agricultural land during a remediation process", Plos One, 16(7), e0255137. https://doi.org/10.1371/journal.pone.0255137.
  75. Huang, G.B., Wang, D.H. and Lan, Y. (2011), "Extreme learning machines: A survey", Int. J. Mach. Learn. Cybern., 2(2), 107-122. https://doi.org/10.1007/s13042-011-0019-y.
  76. Huang, H., Ullah, F., Zhou, D.X., Yi, M. and Zhao, Y. (2019), "Mechanisms of ROS regulation of plant development and stress responses", Front. Plant Sci., 10, 800. https://doi.org/10.3389/fpls.2019.00800.
  77. Huang, X., Hao, H., Oslub, K., Habibi, M. and Tounsi, A. (2021b), "Dynamic stability/instability simulation of the rotary sizedependent functionally graded microsystem", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01399-3.
  78. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021c), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform microtube", Eng. Comput.,1-18. https://doi.org/10.1007/s00366-021-01395-7.
  79. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021d), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., 1-13. https://doi.org/10.1007/s00366-021-01320-y.
  80. Inglezakis, V.J. and Grigoropoulou, H. (2004), "Effects of operating conditions on the removal of heavy metals by zeolite in fixed bed reactors", J. Hazard. Mater., 112(1), 37-43. https://doi.org/10.1016/j.jhazmat.2004.02.052.
  81. Ismail, M., Shariati, M., Awal, A.S.M.A., Chiong, C.E., Chahnasir, E.S., Porbar, A., Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681.
  82. Jahanbakhti, E., Fanaie, N. and Rezaeian, A. (2017), "Experimental investigation of panel zone in rigid beam to box column connection", J. Constr. Steel Res., 137, 180-191. https://doi.org/10.1016/j.jcsr.2017.06.025.
  83. Jahandari, S., Tao, Z., Saberian, M., Shariati, M., Li, J., Abolhasani, M., Kazemi, M., Rahmani, A. and Rashidi, M. (2021), "Geotechnical properties of lime-geogrid improved clayey subgrade under various moisture conditions", Road Mater. Pave. Des.,, 1-19. https://doi.org/10.1080/14680629.2021.1950816.
  84. Jaishankar, M., Tseten, T., Anbalagan, N., Mathew, B.B. and Beeregowda, K.N. (2014), "Toxicity, mechanism and health effects of some heavy metals", Interdiscipl. Toxicol., 7(2), 60-72. https://doi.org/10.2478/intox-2014-0009.
  85. Jiao, J., Ghoreishi, S.M., Moradi, Z. and Oslub, K. (2021), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magnetoelectro- elastic nanosystem", Eng. Comput., 1-15. https://doi.org/ 10.1007/s00366-021-01391-x.
  86. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.-T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput.,, 1-20. https://doi.org/10.1007/s00366-019-00780-7.
  87. Kazapoe, R. and Arhin, E. (2021), "Determination of local background and baseline values of elements within the soils of the Birimian Terrain of the Wassa Area of Southwest Ghana", Geol. Ecol. Landsc., 5(3), 199-208. https://doi.org/10.1080/24749508.2019.1705644.
  88. Kazerani, S., Fanaie, N. and Soroushnia, S. (2017), "Seismic behavior of drilled beam section in moment connections", Int. J. Numer. Meth. Civil Eng., 1(4), 1-6.
  89. Khanchoul, K., Balla, F. and Othmani, O. (2020), "Assessment of soil erosion by RUSLE model using GIS: A case study of chemorah basin, Algeria", Malaysian J. Geosci., 4(2), 70-78. https://doi.org/10.26480/mjg.02.2020.70.78
  90. Khanouki, M.M.A., Ramli Sulong, N.H., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. https://doi.org/10.1016/j.jcsr.2016.01.002.
  91. Khorami, M., Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M.M. (2017a), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)," Earthq. Struct., 13(6), 531-538. https://doi.org/10.12989/eas.2017.13.6.531.
  92. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017b), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268 https://doi.org/10.12989/sem.2017.63.2.259.
  93. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M. M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 67-85 https://doi.org/10.12989/scs.2017.23.1.067.
  94. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N. H. (2015), "Behavior of tilted angle shear connectors", PLoS One, 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288.
  95. Kumari, A., Kumari, P., Rajput, V.D., Sushkova, S.N. and Minkina, T. (2022), "Metal(loid) nanosorbents in restoration of polluted soils: Geochemical, ecotoxicological, and remediation perspectives", Environ. Geochem. Health, 44(1), 235-246. https://doi.org/10.1007/s10653-021-00996-x.
  96. Kumpiene, J., Lagerkvist, A. and Maurice, C. (2008), "Stabilization of As, Cr, Cu, Pb and Zn in soil using amendments - A review", Waste Manag., 28(1), 215-225. https://doi.org/10.1016/j.wasman.2006.12.012.
  97. Li, L.N., Ouyang, J.H., Chen, H.L. and Liu, D.Y. (2012), "A computer aided diagnosis system for thyroid disease using extreme learning machine", J. Med. Syst., 36(5), 3327-3337. https://doi.org/10.1007/s10916-012-9825-3.
  98. Li, D.Y., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207.
  99. Li, G., Sun, Y. and Qi, C. (2021), "Machine learning-based constitutive models for cement-grouted coal specimens under shearing", Int. J. Min. Sci. Technol., 31(5), 813-823. https://doi.org/10.1016/j.ijmst.2021.08.005.
  100. Li, J., Tang, F. and Habibi, M. (2022a), "Bi-directional thermal buckling and resonance frequency characteristics of a GNPreinforced composite nanostructure", Eng. Comput., 38(2), 1559-1580. http://doi.org/10.1007/s00366-020-01110-y.
  101. Li, X., Wang, Y., Hu, Y., Zhou, C. and Zhang, H. (2022b), "Numerical investigation on stratum and surface deformation in underground phosphorite mining under different mining methods", Front. Earth Sci.,, 194. https://doi.org/ 10.3389/feart.2022.831856.
  102. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2022c), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comput., 38(1), 703-724. https://doi.org/10.1007/s00366-020-01166-w.
  103. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021a), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01316-8.
  104. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M.O. and Issakhov, A. (2021b), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-021-01419-2.
  105. Liu, R. and Lal, R. (2012), "Nanoenhanced materials for reclamation of mine lands and other degraded soils: A review", J. Nanotechnol., 2012, 461468. https://doi.org/10.1155/2012/461468.
  106. Liu, W., Li, J., Zheng, J., Song, Y., Shi, Z., Lin, Z. and Chai, L. (2020a), "Different pathways for Cr (III) oxidation: Implications for Cr (VI) reoccurrence in reduced chromite ore processing residue", Environ. Sci. Technol., 54(19), 11971-11979. https://doi.org/10.1021/acs.est.0c01855.
  107. Liu, Y., Wang, W., He, T., Moradi, Z. and Larco Benitez, M. A. (2021c), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-021-01454-z.
  108. Liu, Y., Zhang, Z., Liu, X., Wang, L. and Xia, X. (2021d), "Efficient image segmentation based on deep learning for mineral image classification", Adv. Powd. Technol., 32(10), 3885-3903. https://doi.org/10.1016/j.apt.2021.08.038.
  109. Liu, Y., Zhang, Z., Liu, X., Wang, L. and Xia, X. (2021e), "Ore image classification based on small deep learning model: Evaluation and optimization of model depth, model structure and data size", Miner. Eng., 172, 107020. https://doi.org/10.1016/j.mineng.2021.107020.
  110. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020b), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Based Des. Struct., 1-26. http://doi.org/10.1080/15397734.2020.1784201.
  111. Liu, Z., Wu, X., Yu, M. and Habibi, M. (2020c), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermo-mechanical loadings", Mech. Based Des. Struct., 1-25. https://doi.org/10.1080/15397734.2020.1815544.
  112. Luo, J., Song, J., Moradi, Z., Safa, M. and Khadimallah, M. A. (2022), "Effect of simultaneous compressive and inertia loads on the bifurcation stability of shear deformable functionally graded annular fabrications reinforced with graphenes", Eur. J. Mech. A Solid., 94, 104581. https://doi.org/10.1016/j.euromechsol.2022.104581.
  113. Luo, Z.Y., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., 30(3), 271-280. https://doi.org/10.12989/scs.2019.30.3.271.
  114. Ma, L., Liu, X. and Moradi, Z. (2021), "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. Comput., 1-25. https://doi.org/10.1007/s00366-020-01210-9.
  115. Martin, J.L., Maris, V. and Simberloff, D.S. (2016), "The need to respect nature and its limits challenges society and conservation science", Proc. Nat. Acad. Sci., 113(22), 6105-6112. https://doi.org/10.1073/pnas.1525003113.
  116. Martinez-Alcala, I. and Bernal, M.P. (2020), "Environmental impact of metals, metalloids, and their toxicity", Metalloids Plants Adv. Future Prospect, 451-488. https://doi.org/10.1002/9781119487210.ch21.
  117. Medina-Perez, G., Fernandez-Luqueno, F., Vazquez-Nunez, E., Lopez-Valdez, F., Prieto-Mendez, J., Madariaga-Navarrete, A. and Miranda-Arambula, M. (2019), "Remediating polluted soils using nanotechnologies: Environmental benefits and risks", Polish J. Environ. Stud., 28(3). http://doi.org/10.15244/pjoes/87099.
  118. Mehrabi, P., Shariati, M., Kabirifar, K., Jarrah, M., Rasekh, H., Trung, N.T., Shariati, A. and Jahandari, S. (2021), "Effect of pumice powder and nano-clay on the strength and permeability of fiber-reinforced pervious concrete incorporating recycled concrete aggregate", Constr. Build. Mater., 287, 122652. http://doi.org/ARTN12265210.1016/j.conbuildmat.2021.122652.
  119. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A, 531, 121169. https://doi.org/10.1016/j.physa.2019.121169.
  120. Ming, D.W. and Allen, E.R. (2001), "Use of natural zeolites in agronomy, horticulture and environmental soil remediation", Rev. Miner. Geochem., 45(1), 619-654. https://doi.org/10.2138/rmg.2001.45.18.
  121. Moayedi, H., Aliakbarlou, H., Jebeli, M., Noormohammadiarani, O., Habibi, M., Safarpour, H. and Foong, L. (2020), "Thermal buckling responses of a graphene reinforced composite micropanel structure", Int. J. Appl. Mech., 12(1), 2050010. https://doi.org/10.1142/s1758825120500106
  122. Moayedi, H., Ebrahimi, F., Habibi, M., Safarpour, H. and Foong, L.K. (2021), "Application of nonlocal strain-stress gradient theory and GDQEM for thermo-vibration responses of a laminated composite nanoshell", Eng. Comput., 37(4), 3359-3374. http://doi.org/10.1007/s00366-020-01002-1.
  123. Moayedi, H., Habibi, M., Safarpour, H., Safarpour, M. and Foong, L. (2019), "Buckling and frequency responses of a graphene nanoplatelet reinforced composite microdisk", Int. J. Appl. Mech., 11(10), 1950102. https://doi.org/10.1142/S1758825119501023.
  124. Moghadam, H., Fanaei, N. and Motazedian, D. (2010), "Estimation of stress drop for some large shallow earthquakes using stochastic point source and finite fault modeling", Scientia Iranica, 17(3),
  125. Mohammadhassa,ni, M., Akib, S., Shariati, M., Suhatril, M. and Khanouki, M. M. A. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. http://doi.org/10.1016/j.engfailanal.2013.08.014.
  126. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013a), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., 46(6), 853-868. http://doi.org/10.12989/sem.2013.46.6.853.
  127. Mohammadhassani, M., Nezamabadi-pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., 14(5), 785-809. http://doi.org/10.12989/sss.2014.14.5.785.
  128. Mohammadhassani, M., Saleh, A. M. D., Suhatril, M. and Safa, M. (2015), "Fuzzy modelling approach for shear strength prediction of RC deep beams", Smart Struct. Syst., 16(3), 497-519. https://doi.org/10.12989/sss.2015.16.3.497.
  129. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2013b), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. http://doi.org/10.12989/sem.2013.48.6.833.
  130. Mohammadi, A., Lashini, H., Habibi, M. and Safarpour, H. (2019), "Influence of viscoelastic foundation on dynamic behaviour of the double walled cylindrical inhomogeneous micro shell using MCST and with the aid of GDQM", J. Solid Mech., 11(2), 440-453 http://doi.org/10.22034/jsm.2019.665264.
  131. Mojtaba, D. (2011), "A new finite element investigation on prebent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050. http://doi.org/10.5897/ijps11.1585.
  132. Moradi, Z., Davoudi, M., Ebrahimi, F. and Ehyaei, A.F. (2021), "Intelligent wave dispersion control of an inhomogeneous micro-shell using a proportional-derivative smart controller", Wave. Random Complex Med.,, 1-24. http://doi.org/10.1080/17455030.2021.1926572.
  133. Mueller, N.C. and Nowack, B. (2010), "Nanoparticles for remediation: Solving big problems with little particles", Elements, 6(6), 395-400. https://doi.org/10.2113/gselements.6.6.395.
  134. Mukhopadhyay, S. and Maiti, S. (2010), "Phytoremediation of metal mine waste", Appl. Ecol. Environ. Res., 8(3), 207-222.
  135. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020a), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., 35(2), 279-294. http://doi.org/10.12989/scs.2020.35.2.279.
  136. Naghipour, M., Yousofizinsaz, G. and Shariati, M. (2020b), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines", Steel Compos. Struct., 34(3), 347-359. http://doi.org/10.12989/scs.2020.34.3.347.
  137. Najaafi, N., Jamali, M., Habibi, M., Sadeghi, S., Jung, D. w. and Nabipour, N. (2021), "Dynamic instability responses of the substructure living biological cells in the cytoplasm environment using stress-strain size-dependent theory", J. Biomol. Struct. Dyn., 39(7), 2543-2554. http://doi.org/10.1080/07391102.2020.1751297.
  138. Najarkolaie, K.F., Mohammadi, M. and Fanaie, N. (2017), "Realistic behavior of infilled steel frames in seismic events: experimental and analytical study", Bull. Earthq. Eng., 15(12), 5365-5392. https://doi.org/10.1007/s10518-017-0173-z.
  139. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., 27(5), 537-543. http://doi.org/10.12989/scs.2018.27.5.537.
  140. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Aliabad, M.D., Marto, A., Mu'azu, M., Ghanbari, E., Mandizadeh, M.B., Shariati, A. and Khorami, M. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. http://doi.org/10.12989/sss.2018.22.4.425.
  141. Nouri, K., Sulong, N. H. R., Ibrahim, Z. and Shariati, M. (2021), "Behaviour of novel stiffened angle shear connectors at ambient and elevated temperatures", Adv. Steel Constr., 17(1), 28-38. http://doi.org/10.18057/Ijasc.2021.17.1.4.
  142. Otto, M., Floyd, M. and Bajpai, S. (2008), "Nanotechnology for site remediation", Remediat. J., 19(1), 99-108. https://doi.org/10.1002/rem.20194.
  143. Oyarhossein, M.A., Alizadeh, A.A., Habibi, M., Makkiabadi, M., Daman, M., Safarpour, H. and Jung, D.W. (2020), "Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes", Sci. Rep., 10(1), 5616. http://doi.org/10.1038/s41598-020-61855-w.
  144. Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., 28(4), 483-494. http://doi.org/ 10.12989/scs.2018.28.4.483.
  145. Parikh, S.J. and James, B.R. (2012), "The foundation of agriculture: Nature education", Knowledge, 3(2).
  146. Partovi, F. and Fanaie, N. (2020), "Controlling deflection of long steel I-shaped girder bridge using two V-shaped pre-tensioning cables", J. Central South Univ., 27(2), 566-577. http://doi.org/10.1007/s11771-020-4317-y.
  147. Pourjabari, A., Hajilak, Z. E., Mohammadi, A., Habibi, M. and Safarpour, H. (2019), "Effect of Porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures", Comput. Math. Appl., 77(10), 2608-2626. https://doi.org/10.1016/j.camwa.2018.12.041.
  148. Pretty, J. and Bharucha, Z. P. (2014), "Sustainable intensification in agricultural systems", Annals Botany, 114(8), 1571-1596. http://doi.org/10.1093/aob/mcu205.
  149. Qi, C. and Fourie, A. (2019), "Cemented paste backfill for mineral tailings management: Review and future perspectives", Miner. Eng., 144, 106025. https://doi.org/10.1016/j.mineng.2019.106025
  150. Qi, C., Manzano, H., Spagnoli, D., Chen, Q. and Fourie, A. (2021), "Initial hydration process of calcium silicates in Portland cement: A comprehensive comparison from molecular dynamics simulations", Cement Concr. Res., 149, 106576. https://doi.org/10.1016/j.cemconres.2021.106576
  151. Qi, C., Xu, X. and Chen, Q. (2022), "Hydration reactivity difference between dicalcium silicate and tricalcium silicate revealed from structural and Bader charge analysis", Int. J. Miner. Metall. Mater., 29(2), 335-344. http://doi.org/10.1007/s12613-021-2364-5.
  152. Raffa, C.M., Chiampo, F. and Shanthakumar, S. (2021), "Remediation of metal/metalloid-polluted Soils: A short review", Appl. Sci., 11(9), 4134. https://doi.org/10.3390/app11094134
  153. Rajput, V., Minkina, T., Mazarji, M., Shende, S., Sushkova, S., Mandzhieva, S., Burachevskaya, M., Chaplygin, V., Singh, A. and Jatav, H. (2020), "Accumulation of nanoparticles in the soil-plant systems and their effects on human health", Annal. Agric. Sci., 65(2), 137-143. https://doi.org/10.1016/j.aoas.2020.08.001.
  154. Rajput, V.D., Minkina, T., Kimber, R.L., Singh, V.K., Shende, S., Behal, A., Sushkova, S., Mandzhieva, S. and Lloyd, J.R. (2021), "Insights into the biosynthesis of nanoparticles by the Genus Shewanella", Appl. Environ. Microbiol., 87(22), e0139021. http://doi.org/10.1128/aem.01390-21.
  155. Rajput, V.D., Minkina, T., Kumari, A., Ranjan, A., Faizan, M., Barakvov, A., Gromovik, A., Gorbunova, N., Rajput, P. and Singh, A. (2022), "A review on nanobioremediation approaches for restoration of contaminated soil", Eur. J. Soil Sci., 11(1), 43-60. http://doi.org/https://doi.org/10.18393/ejss.990605.
  156. Rasmussen, L.D., Sorensen, S.J., Turner, R.R. and Barkay, T. (2000), "Application of a mer-lux biosensor for estimating bioavailable mercury in soil", Soil Biol. Biochem., 32(5), 639-646. https://doi.org/10.1016/S0038-0717(99)00190-X.
  157. Razavian, L., Naghipour, M., Shariati, M. and Safa, M. (2020), "Experimental study of the behavior of composite timber columns confined with hollow rectangular steel sections under compression", Struct. Eng. Mech., 74(1), 145-156. http://doi.org/10.12989/sem.2020.74.1.145.
  158. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E. T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., 22(4), 413-424. http://doi.org/10.12989/sss.2018.22.4.413.
  159. Safa, M., Ahmadi, M., Mehrmashadi, J., Petkovic, D., Mohammadhassani, M., Zandi, Y. and Sedghi, Y. (2020a), "Selection of the most influential parameters on vectorial crystal growth of highly oriented vertically aligned carbon nanotubes by adaptive neuro-fuzzy technique", Int. J. Hydromechatron., 3(3), 238-251. https://doi.org/10.1504/ijhm.2020.109919
  160. Safa, M., Maleka, A., Arjomand, M.A., Khorami, M. and Shariati, M. (2019), "Strain rate effects on soil-geosynthetic interaction in fine-grained soil", Geomech. Eng., 19(6), 523-532. http://doi.org/10.12989/gae.2019.19.6.523.
  161. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020b), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A, 550, 124046. https://doi.org/10.1016/j.physa.2019.124046.
  162. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Bin Baharom, S., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel Compos. Struct., 21(3), 679-688. http://doi.org/10.12989/scs.2016.21.3.679.
  163. Safarpour, H., Ali Ghanizadeh, S. and Habibi, M. (2018), "Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory", Eur. Phys. J. Plus, 133(12), 532. https://doi.org/10.1140/epjp/i2018-12385-2
  164. Safarpour, H., Esmailpoor Hajilak, Z. and Habibi, M. (2019a), "A size-dependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation", Int. J. Mech. Mater. Des., 15(3), 569-583. http://doi.org/10.1007/s10999-018-9431-8.
  165. Safarpour, H., Pourghader, J. and Habibi, M. (2019b), "Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical threedimensional shell coupled with piezoelectric actuator", J. Vib. Control, 25(9), 1543-1557. http://doi.org/10.1177/1077546319828465.
  166. Safarpour, M., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021), "On the nonlinear dynamics of a multi-scale hybrid nanocomposite disk", Eng. Comput., 37(3), 2369-2388. http://doi.org/10.1007/s00366-020-00949-5.
  167. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., 30(5), 417-432. http://doi.org/10.12989/scs.2019.30.5.417.
  168. Sari, P. A., Suhatril, M., Osman, N., Mu'azu, M. A., Dehghani, H., Sedghi, Y., Safa, M., Hasanipanah, M., Wakil, K. and Khorami, M. (2019), "An intelligent based-model role to simulate the factor of safe slope by support vector regression", Eng. Comput., 35(4), 1521-1531. https://doi.org/10.1007/s00366-018-0677-4.
  169. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Azar, V. M., Toghroli, A., Safa, M., Mohamad, E. T., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., 22(3), 335-340. http://doi.org/10.12989/sss.2018.22.3.335.
  170. Shah, S.N.R., Sulong, N.H.R., Jumaat, M.Z. and Shariati, M. (2016a), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Fail. Anal., 66, 240-258. http://doi.org/10.1016/j.engfailanal.2016.04.017.
  171. Shah, S.N.R., Sulong, N.H.R., Khan, R., Jumaat, M.Z. and Shariati, M. (2016b), "Behavior of Industrial Steel Rack Connections", Mech. Syst. Signal Pr., 70-71, 725-740. http://doi.org/10.1016/j.ymssp.2015.08.026.
  172. Shah, S.N.R., Sulong, N.H.R., Shariati, M. and Jumaat, M.Z. (2015), "Steel rack connections: Identification of most influential factors and a comparison of stiffness design methods", Plos One, 10(10), e0139422. http://doi.org/ARTN e013942210.1371/journal.pone.0139422.
  173. Shah, S.N.R., Sulong, N.H.R., Shariati, M., Khan, R. and Jumaat, M.Z. (2016c), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin Wall. Struct., 106, 471-483. http://doi.org/10.1016/j.tws.2016.05.021.
  174. Shahabi, S.E.M., Sulong, N.H.R., Shariati, M., Mohammadhassani, M. and Shah, S.N.R. (2016a), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., 20(3), 651-669. http://doi.org/10.12989/scs.2016.20.3.651.
  175. Shahabi, S.E.M., Sulong, N.H.R., Shariati, M. and Shah, S.N.R. (2016b), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., 20(1), 185-203. http://doi.org/I10.12989/scs.2016.20.1.185.
  176. Shamsaddini Lori, E., Ebrahimi, F., Elianddy Bin Supeni, E., Habibi, M. and Safarpour, H. (2021), "The critical voltage of a GPL-reinforced composite microdisk covered with piezoelectric layer", Eng. Comput., 37(4), 3489-3508. http://doi.org/10.1007/s00366-020-01004-z.
  177. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng., 21(4), 141. http://doi.org/10.1007/s43452-021-00279-3.
  178. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. http://doi.org/10.12989/scs.2018.29.2.243.
  179. Shariati, A., Barati, M.R., Ebrahimi, F., Singhal, A. and Toghroli, A. (2020a), "Investigating vibrational behavior of graphene sheets under linearly varying in-plane bending load based on the nonlocal strain gradient theory", Adv. Nano Res., 8(4), 265-276. http://doi.org/10.12989/anr.2020.8.4.265.
  180. Shariati, A., Barati, M.R., Ebrahimi, F. and Toghroli, A. (2020b), "Investigation of microstructure and surface effects on vibrational characteristics of nanobeams based on nonlocal couple stress theory", Adv. Nano Res., 8(3), 191-202. http://doi.org/10.12989/anr.2020.8.3.191.
  181. Shariati, A., Bayrami, S.S., Ebrahimi, F. and Toghroli, A. (2020c), "Wave propagation analysis of electro-rheological fluid-filled sandwich composite beam", Mech. Based Des. Struct., 1-10. http://doi.org/10.1080/15397734.2020.1745646.
  182. Shariati, A., Ebrahimi, F., Hosseini, S.H.S., Toghroli, A. and Bayrami, S.S. (2020d), "On the nonlinear dynamics of viscoelastic graphene sheets conveying nanoflow: Parametric excitation analysis", Mech. Based Des. Struct., 1-18. http://doi.org/10.1080/15397734.2020.1728544.
  183. Shariati, A., Ebrahimi, F., Karimiasl, M., Selvamani, R. and Toghroli, A. (2020e), "On bending characteristics of smart magneto-electro-piezoelectric nanobeams system", Adv. Nano Res., 9(3), 183-191. http://doi.org/10.12989/anr.2020.9.3.183.
  184. Shariati, A., Ebrahimi, F., Karimiasl, M., Vinyas, M. and Toghroli, A. (2020f), "On transient hygrothermal vibration of embedded viscoelastic flexoelectric/piezoelectric nanobeams under magnetic loading", Adv. Nano Res., 8(1), 49-58. http://doi.org/10.12989/anr.2020.8.1.049.
  185. Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2021a), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng. Comput., 37(4), 3629-3648. http://doi.org/10.1007/s00366-020-01024-9
  186. Shariati, A., Hosseini, S.H.S., Bayrami, S.S., Ebrahimi, F. and Toghroli, A. (2021b), "Effect of residual surface stress on parametrically excited nonlinear dynamics and instability of viscoelastic piezoelectric nanoelectromechanical resonators", Eng. Comput., 37(3), 1835-1850. http://doi.org/10.1007/s00366-019-00916-9.
  187. Shariati, A., Hosseini, S.H.S., Ebrahimi, F. and Toghroli, A. (2021c), "Nonlinear dynamics and vibration of reinforced piezoelectric scale-dependent plates as a class of nonlinear Mathieu-Hill systems: Parametric excitation analysis", Eng. Comput., 37(3), 2285-2301. https://doi.org/10.1007/s00366-020-00942-y.
  188. Shariati, A., Jung, D.W., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020g), "On the vibrations and stability of moving viscoelastic axially functionally graded nanobeams", Materials, 13(7), 1707. https://doi.org/10.3390/ma13071707
  189. Shariati, A., Jung, D.W., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020h), "Stability and dynamics of viscoelastic moving rayleigh beams with an asymmetrical distribution of material parameters", Symmetry, 12(4), 586. https://doi.org/10.3390/sym12040586
  190. Shariati, A., Qaderi, S., Ebrahimi, F. and Toghroli, A. (2020i), "On buckling characteristics of polymer composite plates reinforced with graphene platelets", Eng. Comput., 1-12. http://doi.org/10.1007/s00366-020-00992-2.
  191. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012a), "Various types of shear connectors in composite structure: A review", Int. J. Phys. Sci., 7(22), 2876-2890. https://doi.org/10.5897/IJPSx11.004.
  192. Shariati, A., Shariati, M., Sulong, N.H.R., Suhatril, M., Khanouki, M.M.A. and Mahoutian, M. (2014a), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. http://doi.org/10.1016/j.conbuildmat.2013.11.036.
  193. Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2019a), "Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils", Geomech. Eng., 19(6), 473-484. https://doi.org/10.12989/gae.2019.19.6.473.
  194. Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2020j), "Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load", Geomech. Eng., 20(2), 87-101. http://doi.org/10.12989/gae.2020.20.2.087.
  195. Shariati, M., Davoodnabi, S.M., Toghroli, A., Kong, Z.Y. and Shariati, A. (2021d), "Hybridization of metaheuristic algorithms with adaptive neuro-fuzzy inference system to predict load-slip behavior of angle shear connectors at elevated temperatures", Compos. Struct., 278, 114524. http://doi.org/10.1016/j.compstruct.2021.114524.
  196. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.T. and Salih, M.N.A. (2019b), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. http://doi.org/10.12989/scs.2019.33.4.569.
  197. Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020k), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., 34(3), 393-407. https://doi.org/10.12989/scs.2020.34.3.393.
  198. Shariati, M., Grayeli, M., Shariati, A. and Naghipour, M. (2020l), "Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading", Steel Compos. Struct., 36(5), 587-602. https://doi.org/10.12989/scs.2020.36.5.587.
  199. Shariati, M., Heyrati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N.A. and Poi-Ngian, S. (2019c), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. http://doi.org/10.12989/sss.2019.24.4.553.
  200. Shariati, M., Lagzian, M., Maleki, S., Shariati, A. and Trung, N.T. (2020m), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., 35(4), 599-609. http://doi.org/10.12989/scs.2020.35.4.599.
  201. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020n), "A novel hybrid extreme learning machine-grey wolf optimizer (ELMGWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. http://doi.org/10.1007/s00366-020-01081-0.
  202. Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020o), "Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)", Steel Compos. Struct., 34(1), 155-170. http://doi.org/10.12989/scs.2020.34.1.155.
  203. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020p), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., 25(2), 183-195. http://doi.org/10.12989/sss.2020.25.2.183.
  204. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N.A., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019d), "Application of a hybrid artificial neural networkparticle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. http://doi.org/10.3390/app9245534.
  205. Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N. (2020q), "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 1-21. https://doi.org/10.1007/s00366-019-00930-x.
  206. Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020r), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct., 34(3), 377-391. http://doi.org/10.12989/scs.2020.34.3.377.
  207. Shariati, M., Rafie, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Mehrabi, P., Shariat, A., Trung, N.T., Salih, M.N.A. and Poi- Ngian, S. (2019e), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Constr., 8(3), 225-237 http://doi.org/10.12989/acc.2019.8.3.225.
  208. Shariati, M., Ramli-Sulong, N.H., Arabnejad, K.H.M.M., Shafigh, P. and Sinaei, H. (2011a), "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests", Sci. Res. Essay, 6(1), 213-220. https://doi.org/10.5897/SRE10.879.
  209. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structure, Sydney, Australia, July.
  210. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011b), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Sci. Res. Essays, 6(4), 977-983.
  211. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Khanouki, M.A. (2015), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 49(9), 3909-3926 http://doi.org/10.1617/s11527-015-0762-8.
  212. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2011d), "Behavior of channel shear connectors in normal and light weight aggregate concrete (experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303
  213. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012b), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Fifth International Conference on Eng. Fail. Anal., The Hague, The Netherlands, July.
  214. Shariati, M., Shariati, A., Sulong, N.H.R., Suhatril, M. and Khanouki, M.M.A. (2014b), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. http://doi.org/10.1016/j.engfailanal.2014.02.017.
  215. Shariati, M., Shariati, A., Trung, N.T., Shoaei, P., Ameri, F., Bahrami, N. and Zamanabadi, S.N. (2020s), "Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics", Constr. Build. Mater., 120886. https://doi.org/10.1016/j.conbuildmat.2020.120886.
  216. Shariati, M., Sulong, N.H.R. and Khanouki, M.M.A. (2012c), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. http://doi.org/ 10.1016/j.matdes.2011.08.008.
  217. Shariati, M., Sulong, N.H.R., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. http://doi.org/10.1016/j.conbuildmat.2016.05.102.
  218. Shariati, M., Sulong, N.H.R., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2012d), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. http://doi.org/10.1016/j.matdes.2012.04.039.
  219. Shariati, M., Sulong, N.H.R., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. http://doi.org/10.1016/j.conbuildmat.2012.07.050.
  220. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S.N.R., Jalali, A., Abdullahi, M.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166. http://doi.org/10.1016/j.engfailanal.2017.08.014.
  221. Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020t), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation", Steel Compos. Struct., 35(2), 237-247. http://doi.org/10.12989/scs.2020.35.2.237.
  222. Sharma, D., Kanchi, S. and Bisetty, K. (2019), "Biogenic synthesis of nanoparticles: A review", Arab. J. Chem., 12(8), 3576-3600 https://doi.org/10.1016/j.arabjc.2015.11.002.
  223. Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. https://doi.org/10.5897/IJPS11.1225.
  224. Sinaei, H., Shariati, M., Abna, A.H., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Sci. Res. Essay, 7(21), 2002-2009. https://doi.org/10.5897/SRE11.1393.
  225. Sobia, A., Asima, S., Shabnam, S. and Sara, Q. (2019), "Titaniumbased nanocomposite materials for arsenic removal from water", Heliyon, 5(5). http://doi.org/10.1016/j.heliyon.2019.e01577.
  226. Struik, P.C. and Kuyper, T.W. (2017), "Sustainable intensification in agriculture: the richer shade of green. A review", Agronom. Sust. Develop., 37(5), 39. http://doi.org/10.1007/s13593-017-0445-7.
  227. Suhatril, M., Osman, N., Azura Sari, P., Shariati, M. and Marto, A. (2019), "Significance of surface eco-protection techniques for cohesive soils slope in Selangor, Malaysia", Geotech. Geol. Eng., 37(3), 2007-2014. http://doi.org/10.1007/s10706-018-0740-3.
  228. Suman, J., Uhlik, O., Viktorova, J. and Macek, T. (2018), "Phytoextraction of heavy metals: A promising tool for clean-up of polluted environment?", Front. Plant Sci., 9. http://doi.org/10.3389/fpls.2018.01476.
  229. Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N.H. and Tahir, M.M. (2016), "Shear capacity of c-shaped and l-shaped angle shear connectors", PLoS One, 11(8), e0156989. http://doi.org/10.1371/journal.pone.0156989.
  230. Thome, A., Reddy, K.R., Reginatto, C. and Cecchin, I. (2015), "Review of nanotechnology for soil and groundwater remediation: Brazilian perspectives", Water Air Soil Pollut., 226(4), 121. http://doi.org/10.1007/s11270-014-2243-z.
  231. Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Abdullahi, M.M., Heydari, A., Wakil, K., Gebreel, S.A.M. and Khorami, M. (2018a), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concr., 21(5), 525-530. http://doi.org/10.12989/cac.2018.21.5.525.
  232. Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020a), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. http://doi.org.10.1016/j.conbuildmat.2020.118997.
  233. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., 17(5), 623-639. http://doi.org/10.12989/scs.2014.17.5.623.
  234. Toghroli, A., Nasirianfar, M.S., Shariati, A., Khorami, M., Paknahad, M., Ahmadi, M., Gharehaghaj, B. and Zandi, Y. (2020b), "Analysis of extended end plate connection equipped with SMA bolts using component method", Steel Compos. Struct., 36(2), 213-228. http://doi.org/10.12989/scs.2020.36.2.213.
  235. Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland.
  236. Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018b), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., 22(4), 433-440. http://doi.org/ 10.12989/sss.2018.22.4.433.
  237. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel- concrete composite beam", J. Intell. Manuf., 29(8), 1793-1801. http://doi.org/10.1007/s10845-016-1217-y.
  238. Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., 24(3), 415-425. http://doi.org/10.12989/sss.2019.24.3.415.
  239. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 1-14. http://doi.org/10.1080/15376494.2020.1824284.
  240. Wei, X., Shariati, M., Zandi, Y., Pei, S.L., Jin, Z.B., Gharachurlu, S., Abdullahi, M.M., Tahir, M.M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., 27(3), 389-399. http://doi.org/10.12989/scs.2018.27.3.389.
  241. Williams, M.S., Oyedotun, T.D.T. and Simmons, D.A. (2020), "Assessment of water quality of lakes used for recreational purposes in abandoned mines of Linden, Guyana", Geol. Ecol. Landsc., 4(4), 269-281. https://doi.org/10.1080/24749508.2019.1633220.
  242. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultrafast- rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput., 1-17. http://doi.org/10.1007/s00366-021-01396-6.
  243. Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., 30(5), 433-441. http://doi.org/10.12989/scs.2019.30.5.433.
  244. Xiong, S.J., Xu, W.H., Xie, W.W., Chen, R., Chen, Y.Q., Chi, S.L., Chen, X.G., Zhang, J.Z., Xiong, Z.T., Wang, Z.Y. and Xie, D.T. (2015), "Effect of nano zeolite on chemical fractions of Dd in soil and its uptake by cabbage", Huan Jing Ke Xue= Huanjing Kexue, 36(12), 4630-4641.
  245. Xu, C.H., Zhang, X.L., Haido, J.H., Mehrabi, P., Shariati, A., Mohamad, E.T., Nguyen, H. and Wakil, K. (2019), "Using genetic algorithms method for the paramount design of reinforced concrete structures", Struct. Eng. Mech., 71(5), 503-513. http://doi.org/10.12989/sem.2019.71.5.503.
  246. Xu, J., Zhou, L., Hu, K., Li, Y., Zhou, X. and Wang, S. (2022a), "Influence of wet-dry cycles on uniaxial compression behavior of fissured loess disturbed by vibratory loads", KSCE J. Civil Eng., 1-14. https://doi.org/10.1007/s12205-022-1593-0.
  247. Xu, J., Zhou, L., Li, Y., Ding, J., Wang, S. and Cheng, W.C. (2022b), "Experimental study on uniaxial compression behavior of fissured loess before and after vibration", Int. J. Geomech., 22(2), 04021277. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002259.
  248. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 275, 114395. https://doi.org/10.1016/j.compstruct.2021.114395.
  249. Yang, N., Moradi, Z., Khadimallah, M.A. and Arvin, H. (2022), "Application of the Chebyshev-Ritz route in determination of the dynamic instability region boundary for rotating nanocomposite beams reinforced with graphene platelet subjected to a temperature increment", Eng. Anal. Bound. Elem., 139, 169-179. https://doi.org/10.1016/j.enganabound.2022.03.013.
  250. Yazdi, M.H., Sepehrizadeh, Z., Mahdavi, M., Shahverdi, A.R. and Faramarzi, M.A. (2016), "Metal, metalloid, and oxide nanoparticles for therapeutic and diagnostic oncology", Nano Biomed. Eng., 8(4). http://doi.org/10.5101/nbe.v8i4.p246-267.
  251. Yu, X., Maalla, A. and Moradi, Z. (2022), "Electroelastic highorder computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory", Mech. Syst. Signal Pr., 165, 108373. https://doi.org/10.1016/j.ymssp.2021.108373.
  252. Yunus, I.S., Harwin, Kurniawan, A., Adityawarman, D. and Indarto, A. (2012), "Nanotechnologies in water and air pollution treatment", Environ. Technol. Rev., 1(1), 136-148. http://doi.org/10.1080/21622515.2012.733966.
  253. Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D.K., Toghroli, A., Hashemi, M.H., Sedghi, Y., Wakil, K. and Khorami, M. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., 28(4), 439-447. http://doi.org/10.12989/scs.2018.28.4.439.
  254. Zare, R., Najaafi, N., Habibi, M., Ebrahimi, F. and Safarpour, H. (2020), "Influence of imperfection on the smart control frequency characteristics of a cylindrical sensor-actuator GPLRC cylindrical shell using a proportional-derivative smart controller", Smart Struct. Syst., 26(4), 469-480. https://doi.org/10.12989/SSS.2020.26.4.469
  255. Zhan, C., Dai, Z., Soltanian, M. R. and Zhang, X. (2022), "Stage-wise stochastic deep learning inversion framework for subsurface sedimentary structure identification", Geophys. Res. Lett., 49(1), e2021GL095823. https://doi.org/10.1029/2021GL095823.
  256. Zhang, K., Ali, A., Antonarakis, A., Moghaddam, M., Saatchi, S., Tabatabaeenejad, A., Chen, R., Jaruwatanadilok, S., Cuenca, R. and Crow, W.T. (2019), "The sensitivity of North American terrestrial carbon fluxes to spatial and temporal variation in soil moisture: An analysis using radar-derived estimates of root-zone soil moisture", J. Geophys. Res., 124(11), 3208-3231. https://doi.org/10.1029/2018JG004589.
  257. Zhang, M., Wang, Y., Zhao, D. and Pan, G. (2010), "Immobilization of arsenic in soils by stabilized nanoscale zero-valent iron, iron sulfide (FeS), and magnetite (Fe3O4) particles", Chinese Sci, Bull., 55(4), 365-372. http://doi.org/10.1007/s11434-009-0703-4.
  258. Zhang, S., Pak, R.Y. and Zhang, J. (2022), "Three-dimensional frequency-domain green's functions of a finite fluid-saturated soil layer underlain by rigid bedrock to interior loadings", Int. J. Geomech., 22(1), 04021267. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002235.
  259. Zhang, X., Ma, F., Yin, S., Wallace, C.D., Soltanian, M.R., Dai, Z., Ritzi, R.W., Ma, Z., Zhan, C. and Lu, X. (2021a), "Application of upscaling methods for fluid flow and mass transport in multiscale heterogeneous media: A critical review", Appl. Energ., 303, 117603. https://doi.org/10.1016/j.apenergy.2021.117603.
  260. Zhang, X., Shamsodin, M., Wang, H., NoormohammadiArani, O., Khan, A.M., Habibi, M. and Al-Furjan, M.S.H. (2021b), "Dynamic information of the time-dependent tobullian biomolecular structure using a high-accuracy size-dependent theory", J. Biomol. Struct. Dyn., 39(9), 3128-3143. http://doi.org/10.1080/07391102.2020.1760939.
  261. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021c), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Wave. Random Complex Med., 1-24. https://doi.org/10.1080/17455030.2021.1948627.
  262. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. (2021), "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng. Comput., 1-23. http://doi.org/10.1007/s00366-020-01242-1.
  263. Zheng, W., Qian, Y. and Lu, H. (2013), "Text categorization based on regularization extreme learning machine", Neural Comput. Applicat., 22(3), 447-456. https://doi.org/10.1007/s00521-011-0808-y.
  264. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv. Nano Res., 9(4), 295-307. http://doi.org/10.12989/ANR.2020.9.4.295.
  265. Zhu, S., An, L. and He, Y. (2022), "On the wave propagation in a higher-order multi-phase curved porous system", Wave. Random Complex Med., 1-22. https://doi.org/10.1080/17455030.2022.2053607.
  266. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067.
  267. Zorpas, A.A., Constantinides, T., Vlyssides, A.G., Haralambous, I. and Loizidou, M. (2000), "Heavy metal uptake by natural zeolite and metals partitioning in sewage sludge compost", Bioresource Technol., 72(2), 113-119. https://doi.org/10.1016/S0960-8524(99)00110-8.