DOI QR코드

DOI QR Code

A new optimized performance-based methodology for seismic collapse capacity assessment of moment resisting frames

  • Maddah, Mohammad M. (Structural Engineering Research Center, International Institute of Earthquake Engineering and Seismology (IIEES)) ;
  • Eshghi, Sassan (Structural Engineering Research Center, International Institute of Earthquake Engineering and Seismology (IIEES)) ;
  • Garakaninezhad, Alireza (Structural Engineering Research Center, International Institute of Earthquake Engineering and Seismology (IIEES))
  • 투고 : 2021.05.25
  • 심사 : 2022.03.16
  • 발행 : 2022.06.10

초록

Moment-resisting frames (MRFs) are among the most conventional steel structures for mid-rise buildings in many earthquake-prone cities. Here, a simplified performance-based methodology is proposed for the seismic collapse capacity assessment of these buildings. This method employs a novel multi-mode pushover analysis to determine the engineering demand parameters (EDPs) of the regular steel MRFs up to the collapse prevention (CP) performance level. The modal combination coefficients used in the proposed pushover analysis, are obtained from two metaheuristic optimization algorithms and a fitting procedure. The design variables for the optimization process are the inter-story drift ratio profiles resulting from the multi-mode pushover analyses, and the objective values are the outcomes of the incremental dynamic analysis (IDA). Here, the collapse capacity of the structures is assessed in three to five steps, using a modified IDA procedure. A series of regular mid-rise steel MRFs are selected and analyzed to calculate the modal combination coefficients and to validate the proposed approach. The new methodology is verified against the current existing approaches. This comparison shows that the suggested method more accurately evaluates the EDPs and the collapse capacity of the regular MRFs in a robust and easy to implement way.

키워드

과제정보

The work presented here is conducted as part of the project No. 7403 "Developing a Methodology for Seismic Collapse Probability Assessment of Existing Mid-rise Steel Buildings", funded by the International Institute of Earthquake Engineering and Seismology (IIEES).

참고문헌

  1. Abbasnia, R., Tajik Davoudi, A. and Maddah, M.M. (2014), "An improved displacement-based adaptive pushover procedure based on factor modal combination rule", Earthq. Eng. Eng. Vib., 13(2), 223-241. https://doi.org/10.1007/s11803-014-0226-0.
  2. Abbasnia, R., Davoudi, A.T. and Maddah, M.M. (2013), "An adaptive pushover procedure based on effective modal mass combination rule", Eng. Struct., 52, 654-666. https://doi.org/10.1016/j.engstruct.2013.03.029.
  3. Amini, M.A. and Poursha, M. (2018), "Adaptive force-based multimode pushover analysis for seismic evaluation of midrise buildings", J. Struct. Eng., 144(8), 04018093. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002070.
  4. Antoniou, S. and Pinho, R. (2004), "Development and verification of a displacement-based adaptive pushover procedure", J. Earthq. Eng., 8(5), 643-661. https://doi.org/10.1080/13632460409350504.
  5. Baltzopoulos, G., Baraschino, R., Iervolino, I. and Vamvatsikos, D. (2018), "Dynamic analysis of single-degree-of-freedom systems (DYANAS): A graphical user interface for OpenSees", Eng. Struct., 177, 395-408. https://doi.org/10.1016/j.engstruct.2018.09.078.
  6. Brozovic, M. and Dolsek, M. (2014), "Envelope-based pushover analysis procedure for the approximate seismic response analysis of buildings", Earthq. Eng. Struct. Dyn., 43(1), 77-96. https://doi.org/10.1002/eqe.2333.
  7. Chopra, A.K. and Goel, R.K. (2002), "A modal pushover analysis procedure for estimating seismic demands for buildings", Earthq. Eng. Struct. Dyn., 31(3), 561-582. https://doi.org/10.1002/eqe.144.
  8. Chopra, A.K., Goel, R.K. and Chintanapakdee, C. (2004), "Evaluation of a modified MPA procedure assuming higher modes as elastic to estimate seismic demands", Earthq. Spectra, 20(3), 757-778. https://doi.org/10.1193/1.1775237.
  9. Eads, L. and Lignos, D.G. (2012), "Pushover and dynamic analyses of 2-story moment frame with panel zones and RBS", Stanford University.
  10. Eads, L., Ribeiro, F. and Barbosa, A. (2013), "Dynamic analysis of 2-Story moment frame", Stanford University.
  11. Eberhart, R. and Kennedy, J. (2002), "A new optimizer using particle swarm theory", MHS'95, Proceedings of the Sixth International Symposium on Micro Machine and Human Science, IEEE, October.
  12. Eshghi, S. (2020), "Developing a methodology for seismic collapse probability assessment of existing mid-rise steel buildings", Technical Report 7403, International Institute of Earthquake Engineering and Seismology (IIEES), Tehran, Iran.
  13. Eshghi, S. and Maddah, M.M. (2019), "A study on influencing factors for simplified seismic collapse risk assessment of steel moment-resisting frames with intermediate ductility", Int. J. Struct. Integr., 11(6), 833-848. https://doi.org/10.1108/IJSI-07-2019-0076.
  14. FEMA 355c (2000), State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquake Ground Shaking, SAC Joint Venture, Washington, D.C.
  15. FEMA P695 (2009), Quantification of Building Seismic Performance Factors, Federal Emergency Management Agency, Washington, D.C.
  16. Guan, M., Liu, W., Du, H., Cui, J. and Wang, J. (2019), "Combination model for conventional pushover analysis considering higher mode vibration effects", Struct. Des. Tall Spec. Build., 28(12), e1625. https://doi.org/10.1002/tal.1625.
  17. Gupta, A. and Krawinkler, H. (1999), "Seismic demands for the performance evaluation of steel moment resisting frame structures", Technical Report 132, Department of Civil Engineering, Blume Earthquake Engineering Research Center, Stanford University.
  18. Han, S.W. and Chopra, A.K. (2006), "Approximate incremental dynamic analysis using the modal pushover analysis procedure", Earthq. Eng. Struct. Dyn., 35(15), 1853-1873. https://doi.org/10.1002/eqe.605.
  19. Kaveh, A. and Mahdavi, V.R. (2015), Colliding Bodies Optimization: Extensions and Applications, Springer International Publishing.
  20. Tian, L. and Qiu, C. (2018), "Modal pushover analysis of self-centering concentrically braced frames", Struct. Eng. Mech., 65(3), 254-261. https://doi.org/10.12989/sem.2018.65.3.254.
  21. Lignos, D.G., Hikino, T., Matsuoka, Y. and Nakashima, M. (2013), "Collapse assessment of steel moment frames based on E-Defense full-scale shake table collapse tests", J. Struct. Eng., 139(1), 120-132. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000608.
  22. Lignos, D.G. and Krawinkler, H. (2010), "Steel database for component deterioration of tubular hollow square steel columns under varying axial load for collapse assessment of steel structures under earthquakes", Proceedings of the 7th Int. Conf. on Urban Earthquake Engineering (7CUEE), Center for Urban Earthquake Engineering, Tokyo Institute of Technology, Tokyo, Japan.
  23. Lignos, D.G. and Krawinkler, H. (2013), "Development and utilization of structural component databases for performance-based earthquake engineering", J. Struct. Eng., 139(8), 1382-1394. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000646.
  24. Lignos, D.G. and Krawinkler, H. (2011), "Deterioration modeling of steel components in support of collapse prediction of steel moment frames under earthquake loading", J. Struct. Eng., 137(11), 1291-1302. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000376.
  25. Liu, Y. and Kuang, J.S. (2019), "Estimating seismic demands of singly symmetric buildings by spectrum-based pushover analysis", Bull. Earthq. Eng., 17(4), 2093-2113. https://doi.org/10.1007/s10518-018-00534-8.
  26. Maddah, M.M. and Eshghi, S. (2020), "Developing a modified IDA-based methodology for investigation of influencing factors on seismic collapse risk of steel intermediate moment resisting frames", Earthq. Struct., 18, 367-377. https://doi.org/10.12989/eas.2020.18.3.367.
  27. Jalilkhani, M. and Manafpour, A.R. (2018), "Evaluation of seismic collapse capacity of regular RC frames using nonlinear static procedure", Struct. Eng. Mech., 68(6), 647-660. https://doi.org/10.12989/sem.2018.68.6.647.
  28. Mazzoni, S., McKenna, F., Scott, M. and Fenves, G. (2006), "The open system for earthquake engineering simulation (OpenSEES) user command-language manual".
  29. Rahmani, A.Y., Bourahla, N., Bento, R. and Badaoui, M. (2018), "An improved upper-bound pushover procedure for seismic assessment of high-rise moment resisting steel frames", Bull. Earthq. Eng., 16(1), 315-339. https://doi.org/10.1007/s10518-017-0204-9.
  30. Sullivan, T.J., Saborio-Romano, D., O'Reilly, G.J., Welch, D.P. and Landi, L. (2018), "Simplified pushover analysis of moment resisting frame structures", J. Earthq. Eng., 25(4), 621-648. https://doi.org/10.1080/13632469.2018.1528911.
  31. Tajik Davoudi, A., Abbasnia, R., Sarvghad-Moghadam, A., Maddah, M.M. and Khodam, A. (2016), "An alternative modal combination rule for adaptive pushover analysis", Struct. Des. Tall Spec. Build., 25(7), 325-339. https://doi.org/10.1002/tal.1260.
  32. Vamvatsikos, D. and Cornell, C. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141.
  33. Yang, X.S. (2013), "Optimization and metaheuristic algorithms in engineering", Metaheuristics in Water, Geotechnical and Transport Engineering, Elsevier.