DOI QR코드

DOI QR Code

Free vibration behaviour of multi-directional functionally graded imperfect plates using 3D isogeometric approach

  • Lahdiri, Abdelhafid (Laboratory of Solid Mechanics and Systems, University of M'Hamed Bougara) ;
  • Kadri, Mohammed (Laboratory of Geomaterials, Environment and Development, University of M'Hamed Bougara)
  • 투고 : 2022.01.14
  • 심사 : 2022.04.20
  • 발행 : 2022.05.25

초록

In this paper the free vibration frequencies of tri-directional functionally graded materials imperfect plate is investigated for Several plate geometries with two types of porosity (even and uneven) and different type of material configuration. The effect of several parameters such as power law index and boundary conditions have been investigated. For this purpose, an efficient computational method is developed and written under Matlab environment, based on a three-dimensional modeling and the isogeometric method is used for the discretization of the structure based on NURBS (Nonuniform rational B-spline) basis functions. The results obtained by the present method are validated by the comparison with the results given by several authors in the literature.

키워드

참고문헌

  1. Akbas, S,.D. (2017), "Vibration and static analysis of functionally graded porous plates", J. Appl. Comput. Mech., 3(3), 199-207. http://doi.org/10.22055/jacm.2017.21540.1107.
  2. Avcar, M. (2019), "Free vibration of imperfect sigmoid and power law functionally graded beams", Steel Compos. Struct., 30(6), 603-615. https://doi.org/10.12989/scs.2019.30.6.603
  3. Al-Furjan, M., Habibi, M., Shan, L. and Tounsi, A. (2021), "On the vibrations of the imperfect sandwich higher-order disk with a lactic core using generalize differential quadrature method", Compos. Struct., 257, 113150. https://doi.org/10.1016/j.compstruct.2020.113150.
  4. Al-Osta, M.A., Saidi, H., Tounsi, A., Al-Dulaijan, S., Al-Zahrani, M., Sharif, A. and Tounsi, A. (2021), "Influence of porosity on the hygro-thermo-mechanical bending response of an AFG ceramic-metal plates using an integral plate model", Smart Struct. Syst., 28(4), 499-513. https://doi.org/10.12989/sss.2021.28.4.499.
  5. Arshid, E., Khorasani, M., Soleimani-Javid, Z., Amir, S. and Tounsi, A. (2021), "Porosity-dependent vibration analysis of FG microplates embedded by polymeric nanocomposite patches considering hygrothermal effect via an innovative plate theory", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-021-01382-y.
  6. Attia, A., Berrabah, A. T., Bousahla, A. A., Bourada, F., Tounsi, A. and Mahmoud, S (2021), "Free vibration analysis of FG plates under thermal environment via a simple 4-unknown HSDT", Steel Compos. Struct., 41(6), 899-910. https://doi.org/10.12989/scs.2021.41.6.899.
  7. Bazilevs, Y., Calo, V.M., Zhang, Y. and Hughes, T.J. (2006), "Isogeometric fluid-structure interaction analysis with applications to arterial blood flow", Comput. Mech., 38(4-5), 310-322. https://doi.org/10.1007/s00466-006-0084-3.
  8. Bekkaye, T.H.L., Fahsi, B., Bousahla, A.A., Bourada, F., Tounsi, A., Benrahou, K.H. and Al-Zahrani, M.M. (2020), "Porosity-dependent mechanical behaviors of FG plate using refined trigonometric shear deformation theory", Comput. Concrete, 26(5), 439-450. https://doi.org/10.12989/cac.2020.26.5.439.
  9. Bellifa, H., Selim, M. M., Chikh, A., Bousahla, A. A., Bourada, F., Tounsi, A. and Tounsi, A. (2021), "Influence of porosity on thermal buckling behavior of functionally graded beams", Smart Struct. Syst., 27(4), 719-728. https://doi.org/10.12989/sss.2021.27.4.719.
  10. Bakoura, A., Bourada, F., Bousahla, A.A., Tounsi, A., Benrahou, K.H., Tounsi, A. and Mahmoud, S. (2021), "Buckling analysis of functionally graded plates using HSDT in conjunction with the stress function method", Comput. Concrete, 27(1), 73-83. https://doi.org/10.12989/cac.2021.27.1.073.
  11. Bouafia, K., Selim, M.M., Bourada, F., Bousahla, A.A., Bourada, M., Tounsi, A. and Tounsi, A. (2021), "Bending and free vibration characteristics of various compositions of FG plates on elastic foundation via quasi 3D HSDT model", Steel Compos. Struct., 41(4), 487-503. https://doi.org/10.12989/scs.2021.41.4.487.
  12. Chami, K., Messafer, T. and Hadji, L. (2020), "Analytical modeling of bending and free vibration of thick advanced composite beams resting on Winkler-Pasternak elastic foundation", Earthq. Struct., 19(2), 91-101. https://doi.org/10.12989/eas.2020.19.2.091.
  13. Cottrell, J.A., Hughes, T.J. and Bazilevs, Y. (2009), Isogeometric Analysis: Toward Integration of CAD and FEA, John Wiley and Sons, NJ, USA.
  14. COX, M. (1971), "The numerical evaluation of B-Splines", IMA J. Appl. Math., 10(2), 134-149. https://doi.org/10.1093/imamat/10.2.134.
  15. De Boor, C. (1972), "On calculating with B-splines", J. Approximation Theory, 6(1), 50-62. https://doi.org/10.1016/0021-9045(72)90080-9
  16. Guellil, M., Saidi, H., Bourada, F., Bousahla, A.A., Tounsi, A., Al-Zahrani, M.M. and Mahmoud, S. (2021), "Influences of porosity distributions and boundary conditions on mechanical bending response of functionally graded plates resting on Pasternak foundation", Steel Compos. Struct., 38(1), 1-15. https://doi.org/10.12989/scs.2021.38.1.001.
  17. Ha, L.T. (2022), "Free vibration of a bi-directional imperfect functionally graded sandwich beams", Modern Mechanics and Applications, Springer, Singapore. 100-111. https://doi.org/10.1007/978-981-16-3239-6_8.
  18. Hadji, L., Bernard, F., Safa, A. and Tounsi, A. (2021), "Bending and free vibration analysis for FGM plates containing various distribution shape of porosity", Adv. Mater. Res., 10(2), 115-135. https://doi.org/10.12989/amr.2021.10.2.115.
  19. Hosseini-Hashemi, S., Fadaee, M. and Atashipour, S.R. (2011), "A new exact analytical approach for free vibration of Reissner-Mindlin functionally graded rectangular plates", J. Mech. Sci., 53(1), 11-22. https://doi.org/10.1016/j.ijmecsci.2010.10.002.
  20. Hughes, T.J., Cottrell, J.A. and Bazilevs, Y. (2005), "Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement", Comput. Methods Appl. Mech. Eng., 194(39-41), 4135-4195. https://doi.org/10.1016/j.cma.2004.10.008.
  21. Hachemi, H., Bousahla, A.A., Kaci, A., Bourada, F., Tounsi, A., Benrahou, K.H. and Mahmoud, S. (2021), "Bending analysis of functionally graded plates using a new refined quasi-3D shear deformation theory and the concept of the neutral surface position", Steel Compos. Struct., 39(1), 51-64. https://doi.org/10.12989/scs.2021.39.1.051.
  22. Hebali, H., Chikh, A., Bousahla, A.A., Bourada, F., Tounsi, A., Benrahou, K.H., Hussain, M. and Tounsi, A. (2022), "Effect of the variable visco-Pasternak foundations on the bending and dynamic behaviors of FG plates using integral HSDT model", Arch. Appl. Mech., 83(2), 177-191. https://doi.org/10.12989/gae.2022.28.1.049.
  23. Keddouri, A., Hadji, L. and Tounsi, A. (2019), "Static analysis of functionally graded sandwich plates with porosities", Adv. Mater. Res., 8(3), 155-177. https://doi.org/10.12989/amr.2019.8.3.155.
  24. Kaddari, M., Kaci, A., Bousahla, A.A., Tounsi, A., Bourada, F., Bedia, E.A. and Al-Osta, M.A. (2020), "A study on the structural behaviour of functionally graded porous plates on elastic foundation using a new quasi-3D model: Bending and free vibration analysis", Comput. Concrete, 25(1), 37-57. https://doi.org/10.12989/cac.2020.25.1.037.
  25. Kumar, Y., Gupta, A. and Tounsi, A. (2021), "Size-dependent vibration response of porous graded nanostructure with FEM and nonlocal continuum model", Adv. Nano Res., 11(1), 1-17. https://doi.org/10.12989/anr.2021.11.1.001.
  26. Kouider, D., Kaci, A., Selim, M.M., Bousahla, A.A., Bourada, F., Tounsi, A. and Hussain, M. (2021), "An original four-variable quasi-3D shear deformation theory for the static and free vibration analysis of new type of sandwich plates with both FG face sheets and FGM hard core", Steel Compos. Struct., 41(2), 167-191. https://doi.org/10.12989/scs.2021.41.2.167.
  27. Lei, J., Y. He, Z. Li, S. Guo and D. Liu. (2019), "Postbuckling analysis of bi-directional functionally graded imperfect beams based on a novel third-order shear deformation theory", Compos. Struct., 209, 811-829. https://doi.org/10.1016/j.compstruct.2018.10.106.
  28. Les, P. and T. Wayne. (1997), The NURBS book, Springer-Verlag, Berlin, Germany.
  29. Nemat-Alla, M. (2003), "Reduction of thermal stresses by developing two-dimensional functionally graded materials", J. Solids Struct., 40(26), 7339-7356. https://doi.org/10.1016/j.ijsolstr.2003.08.017.
  30. Nguyen, K.D. and Nguyen-Xuan, H. (2015), "An isogeometric finite element approach for threedimensional static and dynamic analysis of functionally graded material plate structures", Compos. Struct., 132, 423-439. https://doi.org/10.1016/j.compstruct.2015.04.063.
  31. Menasria, A., Kaci, A., Bousahla, A.A., Bourada, F., Tounsi, A., Benrahou, K.H. and Mahmoud, S. (2020), "A four-unknown refined plate theory for dynamic analysis of FG-sandwich plates under various boundary conditions", Steel Compos. Struct., 36(3), 355-367. https://doi.org/10.12989/scs.2020.36.3.355.
  32. Merazka, B., Bouhadra, A., Menasria, A., Selim, M.M., Bousahla, A.A., Bourada, F. and Al-Zahrani, M.M. (2021), "Hygrothermo-mechanical bending response of FG plates resting on elastic foundations", Steel Compos. Struct., 39(5), 631-643. https://doi.org/10.12989/scs.2021.39.5.631.
  33. Mudhaffar, I.M., Tounsi, A., Chikh, A., Al-Osta, M.A., Al-Zahrani, M.M. and Al-Dulaijan, S.U. (2021), "Hygro-thermo-mechanical bending behavior of advanced functionally graded ceramic metal plate resting on a viscoelastic foundation", Structures, 33, 2177-2189. https://doi.org/10.1016/j.istruc.2021.05.090.
  34. Ramteke, P.M. and Panda, S.K. (2021), "Free vibrational behaviour of multi-directional porous functionally graded structures", Arabian J. Sci. Eng., 46, 7741-7756. https://doi.org/10.1007/s13369-021-05461-6 1-16.
  35. Rachid, A., Ouinas, D., Lousdad, A., Zaoui, F.Z., Achour, B., Gasmi, H. and Tounsi, A. (2022), "Mechanical behavior and free vibration analysis of FG doubly curved shells on elastic foundation via a new modified displacements field model of 2D and quasi-3D HSDTs", Thin-Walled Struct., 172, 108783. https://doi.org/10.1016/j.tws.2021.108783.
  36. Saad, M., Hadji, L. and Tounsi, S. (2021), "Effect of porosity on the free vibration analysis of various functionally graded sandwich plates", Adv. Mater. Res., 10(4), 293-311. https://doi.org/10.12989/amr.2021.10.4.293.
  37. Sah, S.K. and Ghosh, A. (2022), "Influence of porosity distribution on free vibration and buckling analysis of multidirectional functionally graded sandwich plates", Compos. Struct., 279, 114795. https://doi.org/10.1016/j.compstruct.2021.114795.
  38. Son, T. and Huu-Tai, T. (2019), "Free-vibration analysis of multidirectional functionally graded plates based on 3D isogeometric analysis", J. Sci. Technol. Civil Eng., 13(2), 1-11. https://doi.org/10.31814/stce.nuce2019-13(2)-01.
  39. Tahir, S. I., Chikh, A., Tounsi, A., Al-Osta, M.A., Al-Dulaijan, S. U. and Al-Zahrani, M.M. (2021), "Wave propagation analysis of a ceramic-metal functionally graded sandwich plate with different porosity distributions in a hygro-thermal environment", Compos. Struct., 269, 114030. https://doi.org/10.1016/j.compstruct.2021.114030.
  40. Tahir, S. I., Tounsi, A., Chikh, A., Al-Osta, M. A., Al-Dulaijan, S. U. and Al-Zahrani, M.M. (2021), "An integral four-variable hyperbolic HSDT for the wave propagation investigation of a ceramic-metal FGM plate with various porosity distributions resting on a viscoelastic foundation", Waves Random Complex Media, 1-24. https://doi.org/10.1080/17455030.2021.1942310.
  41. Yin, S., Deng, Y., Yu, T., Gu, S. and Zhang, G. (2021), "Is geometric analysis for non-classical BernoulliEuler beam model incorporating microstructure and surface energy effects", Appl. Math. Modelling, 89, 470-485. http://doi.org/10.1016/j.apm.2020.07.015.
  42. Yin, S., Deng, Y., Zhang, G., Yu, T. and Gu, S. (2020), "A new isogeometric Timoshenko beam model incorporating microstructures and surface energy effects", Math. Mech. Solids, 25(10), 2005-2022. https://doi.org/10.1177/1081286520917998.
  43. Yin, S., Xiao, Z., Deng, Y., Zhang, G., Liu, J. and Gu, S. (2021), "Isogeometric analysis of size-dependent Bernoulli-Euler beam based on a reformulated strain gradient elasticity theory", Comput. Struct., 253, 106577. https://doi.org/10.1016/j.compstruc.2021.106577.
  44. Zaitoun, M. W., Chikh, A., Tounsi, A., Al-Osta, M.A., Sharif, A., Al-Dulaijan, S.U. and Al-Zahrani, M. M. (2022), "Influence of the visco-Pasternak foundation parameters on the buckling behavior of a sandwich functional graded ceramic-metal plate in a hygrothermal environment", Thin-Walled Struct., 170, 108549. https://doi.org/10.1016/j.tws.2021.108549.
  45. Zine, A., Bousahla, A.A., Bourada, F., Benrahou, K.H., Tounsi, A., Bedia, E.A., Mahmoud, S.R. and Tounsi, A. (2020), "Bending analysis of functionally graded porous plates via a refined shear deformation theory", Comput. Concrete, 26(1), 63-74. https://doi.org/10.12989/cac.2020.26.1.063.