한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제21권2호
  • /
  • Pages.101-108
  • /
  • 2022
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

화력발전소용 원심 슬러리 펌프 임펠러의 침식경향 해석적 연구

Numerical Study on the Erosion Tendency of Centrifugal Slurry Pump Impeller for Thermal Power Plants

  • 천민우 (인하대학교 건설기계공학과) ;
  • 이철희 (인하대학교 기계공학과)
  • Cheon, Min-Woo (Department of Construction Machinery Engineering, Inha University) ;
  • Lee, Chul-Hee (Department of Mechanical Engineering, Inha University)
  • 투고 : 2021.07.26
  • 심사 : 2021.09.27
  • 발행 : 2022.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Centrifugal pumps are typically used in many slurry industries to transport solid materials. Solid particles in the slurry frequently shock the walls inside the pump, significantly abrading the flow path. Wear damage causes replacement of the pump components, which wastes manpower and time. Therefore, previous studies have been conducted on factors to improve efficiency and life time. This study identifies trends in pumps supplying lime to desulfurized devices from thermal power plants. The shear stress transport(SST) model is used to determine the erosion trend of the centrifugal pump that transfers lime slurry. The purpose of this study is to identify efficiency and erosion trends by selecting three of the various impeller design elements. The three impeller blade design variables mentioned above represent the inlet draft angle and blade angle of leading edge(L.E) and trailing edge(T.E). The maximum value of the erosion density rate tends to be similar to the Input power.

키워드

참고문헌

  1. Wilson, K. C., Addie, G. R., Sellgren, A., Clift, R., "Slurry Transport Using Centrifugal Pumps," Gardners Books; Elsevier Applied Science: London, UK, 1992.
  2. Tarodiya, R., Gandhi, B. K., "Hydraulic performance and erosive wear of centrifugal pumps," Powder Technology, Vol. 305, pp. 27-38, 2017. https://doi.org/10.1016/j.powtec.2016.09.048
  3. Shojaeefard, M. H., Tahani, M., Ehghaghi, M. B., Fallahian, M. A., & Beglari, M., "Numerical study of the effects of some geometric characteristics of a centrifugal pump impeller that pumps a viscous fluid," Comput. Fluids 60, pp. 61-70, 2012. https://doi.org/10.1016/j.compfluid.2012.02.028
  4. Kim, J. H., Oh, K. T., Pyun, K. B., Kim, C. K., Choi, Y. S., Yoon, J. Y., "Design optimization of a centrifugal pump impeller and volute using computational fluid dynamics," IOP Conference Series: Earth and Environmental Science, Vol. 15, 2012.
  5. Pagalthivarthi, K. V., Furlan, J. M., Visintainer, R. J., "Comparison of 2D and 3D predictions of erosion wear in centrifugal slurry pump casings," American Society of Mechanical Engineers, Fluids Engineering Division FEDSM, 2013.
  6. Abid, M., Noon, A. A., "Turbulent flow simulations through Tarbela Dam Tunnel," Journal of Engineering, Vol. 2, pp. 507-515. 2010.
  7. Gohil, P. P., Saini, R. P., "Effect of temperature, suction head and flow velocity on cavitation in a Francis turbine of small hydro power plant", Energy, 93, pp. 613-624, 2015. https://doi.org/10.1016/j.energy.2015.09.042
  8. Finnie, I., "Some observations on the erosion of ductile metals", Wear, Vol. 19, pp. 36-44, 1972. https://doi.org/10.1016/0043-1648(72)90444-9
  9. Kim, S., Choi, Y. S., Yoon, J. Y. and Kim, D. S., "Design Optimization of Centrifugal Pump Impeller Using DOE," Journal of Fluid Machinery, Vol. 11, No. 3, pp. 36~42, 2008. https://doi.org/10.5293/KFMA.2008.11.3.036