DOI QR코드

DOI QR Code

The Horizontal Restoring Force of a Column in Traditional Wooden Structure - Base on the Slenderness ratio of Cylinder and Vertical Load -

전통 목조 건축물의 기둥이 가지는 수평복원력에 관한 연구 - 원형기둥의 세장비 및 수직하중 변화를 바탕으로 -

  • Shin, Eun-Mi (Safety and Disaster Prevention, National Research Institute of Cultural Heritage) ;
  • Ha, Tae-Uk (Safety and Disaster Prevention, National Research Institute of Cultural Heritage) ;
  • Kim, Hyung-Jun (Safety and Disaster Prevention, National Research Institute of Cultural Heritage) ;
  • Kim, Won-Jong (Safety and Disaster Prevention, National Research Institute of Cultural Heritage)
  • 신은미 (국립문화재연구원 안전방재연구실) ;
  • 하태욱 (국립문화재연구원 안전방재연구실) ;
  • 김형준 (국립문화재연구원 안전방재연구실) ;
  • 김원종 (국립문화재연구원 안전방재연구실)
  • Received : 2022.03.03
  • Accepted : 2022.05.10
  • Published : 2022.05.30

Abstract

To better prepare for increasingly frequent natural disasters such as earthquakes and typhoons, the horizontal resilience capacity of traditional wooden structures should be evaluated. Among the structural elements of traditional wooden structures, a quantitative evaluation method of horizontal restoring force analysis starting with the column was suggested. Among national treasures and cultural assets, traditional wooden structures are widely distributed in columns with a length of 3000 mm and a slenderness ratio of 30. Therefore, based on these column dimensions, the characteristics of the horizontal restoring force of a column was verified through experiments. Based on the results, the correlation between the column dimension and vertical load was confirmed for the horizontal restoring force of a column; a mechanical model of the horizontal restoring force of a column was proposed.

Keywords

Acknowledgement

이 연구는 2022년도 국립문화재연구원 안전방재연구실에서 수행된 ⌈목조 건축문화재 내진성능 연구⌋ 과제의 연구비 지원에 의한 결과의 일부임. 과제번호:NRICH-2205-A64F-1

References

  1. Hwang, J., & Hong, S. (2008). Resisting Capacity and Fracture Mode for Tension Load at Column-Connecting Beam of Traditional Wooden Structure, Journal of the Architectural Institute of Korea, 24(11), 41~52.
  2. Kim, Y., Kim, W., Kim, H., Jung, S., & Kim, D. (2011). Residual Performance Evaluation of Rafters in Traditional Architecture under Weathering Damage, Journal of the Architectural Institute of Korea, 27(9), 45~52.
  3. Cultural Heritage Administration (2013), Manual for Earthquake-inspection of State-designeted Cultural Property.
  4. Ban, S. (1941). Statics of Building Construction Relationg to Japanese Temples and Shrines (Part 1), Journal of the Architectural Institute of Japan, 21, 252-258
  5. Agency for Cultural Affairs, Implementation Guidelines for Preliminary Seismic Assessment of Important Cultural Properties (Buildings), Government of Japan, 2012.
  6. Shin, E., Ha, T., & Kim, H. (2020). Analysis of architectural scale and member dimensions for single story buddist buildings, The society cultural heritage disaster prevention, 5(3), 185~194
  7. Ministry of Land, Infrastructure and Transport, Korea construction standards(KDS 413304:2019), 2019
  8. Seon, S., Ahn, S., Kim, Y., & Lee, S. (1999). A study on the structural analysis of the traditional temple, annual conference of AIK, 19(2), 1999~204
  9. Yoon, C., Yun, Y., & Kang, S. (2004). A study on the Structural Modeling and Analysis for Gukrak-Pavilion of Bongjung-Temple, Journal of the Architectural institute of Korea planning & design, 20(9), 13~20
  10. Kim, H., Lee, J., Park, B., & Yi, W. (2010). Seismic capacity evaluation of the traditional wooden structure using capacity spectrum and seismic index, Journal of the Architectural Institute of Korea Structure & Construction, 26(9), 3~14
  11. Hwang, J., Hwang, J., & Lee, Y. (2013). The Estimation of Natural Period of One Story Traditional Wooden Structures by In-situ Measurement, Journal of Regional Association of Architectural Institute of Korea, 15(6), 219~226
  12. Cultural Heritage Administration (2019). Standard Specification for Repairing Cultural Heritages.