DOI QR코드

DOI QR Code

Increasing the clay membranes' Cr3+ Ions removal ability by coating a bentonite-CMC composite

  • KashaniNia, Fatemeh (Department of Materials Engineering and Metallurgy, Iran University of Science and Technology) ;
  • Rezaie, Hamid Reza (Department of Materials Engineering and Metallurgy, Iran University of Science and Technology) ;
  • Sarpoolaky, Hossein (Department of Materials Engineering and Metallurgy, Iran University of Science and Technology)
  • 투고 : 2021.01.20
  • 심사 : 2022.12.01
  • 발행 : 2022.05.25

초록

In this research, bentonite was intercalated with CMC and then two different percentages of glutaraldehyde (5 & 10%) were added as a crosslink agent to achieve non water-soluble composites. Then the composites were coated on clay-based microfiltration membranes which were synthesized in the previous work of the authors. The XRD technique was used to track the intercalation mechanism and FTIR was used to study the crosslink procedure. SEM was used to study the microstructure and morphology of the coated samples and then the ability of non-coated and coated samples for removal of Cr3+ ions was studied and compared. It was seen that the samples coated with the synthesized composite including 10% of glutaraldehyde showed the best results and removed 99.7% of Cr3+ ions from water polluted with 5 ppm of Cr3+ ions.

키워드

참고문헌

  1. Abramoff, M., Magalhaes, P. and Ram, S.J. (2003), "Image processing with imageJ", Biophotonics Int., 42, 11-36.
  2. Akpomie, K.G., Dawodu, F.A. and Adebowale, K.O. (2015), "Mechanism on the sorption of heavy metals from binary-solution by a low cost montmorillonite and its desorption potential", Alexandria Eng. J., 54(3), 757-767. https://doi.org/10.1016/j.aej.2015.03.025
  3. Bedeleani, H., Maicaneanu, A., Burca, S. and Stanca, M. (2009), "Removal of heavy metal ions from wastewaters using natural clays", Clay Minerals, 44, 487-495. https://doi.org/10.1016/j.aej.2015.03.025.
  4. Braihi, A.J., Salih, S.I., Hashem, F.A. and Ahmed, J.K. (2014), "Proposed crosslinking model for carboxymethyl cellulose/starch superabsorbent polymer blend", Int. J. Mater. Sci. Appl., 3(6), 363-369. https://doi.org/10.11648/j.ijmsa.20140306.23
  5. El-Gendi, A., Ali, S., Abdalla, H. and Saied, M. (2016), "microfiltration/ultrafiltration polyamide-6 membranes for copper removal from aqueous solution", Membr. Water Treat., 7(1), 55-70. http://doi.org/10.12989/mwt.2016.7.1.055.
  6. Ghanbarpourabdoli, N., Raygan, Sh. and Abdizadeh, H. (2016), "Investigating selective removal of Cr (VI) and zinc ions from aqueous media by mechanical- chemical activated red mud", Iran. J. Mater. Sci. Eng., 13(4), 20-32.
  7. Gonenc, I. and Us, F. (2018), "Effect of glutaraldehyde crosslinking on degree of substitution, thermal, structural and physico- chemical properties of corn starch", Starch-Starke, 71(3-4), 1800046. https://doi.org/10.1002/star.201800046.
  8. Hammami, A., Charcosset, C. and Amar R.R.B., (2017), "Performances of continuous adsorption-ultrafiltration hybrid process for AO7 dye removal from aqueous solution and real textile wastewater treatment", J. Membr. Sci. Technol., 7(171), 2. https://doi.org/10.4172/2155-9589.1000171.
  9. Henderson, J.H., Jackson, M.L. and Syers, J.K. (1971), "Cristobalite authigenic origin in relation to montmorillonite and quartz origin in bentonites", Clay Clay Miner., 19(4), 229-238. https://doi.org/10.1346/CCMN.1971.0190404.
  10. Jana, S., Purkait, M.K., Mohanty, K. (2010), "Preparation and characterization of low - cost ceramic microfiltration membranes for the removal of chromate from aqueous solutions", Appl. Clay Sci., 47(3-4), 317-324. https://doi.org/10.1016/j.clay.2009.11.036.
  11. Jana, S., Saikia, A., Purkaita, M.K. and Mohanty, K. (2011,) "Chitosan based ceramic ultrafiltration membrane: Preparation, characterization and application to remove Hg(II) and As(III) using polymer enhanced ultrafiltration", Chem. Eng. J., 170(1), 209-219. https://doi.org/10.1016/j.cej.2011.03.056.
  12. Karnland, O., Olsson, S. and Nilsson, U. (2006), "Mineralogy and sealing properties of various bentonites and smectite-rich clay materials", Swedish Nuclear Fuel and Waste Management Co., Technical Report.
  13. Kashaninia, F., Rezaie, H.R. and Sarpoolaky, H. (2019), "Clay adsorptive membranes for chromium removal", Membr. Water Treat., 10(4) 259-264. https://doi.org/10.12989/mwt.2019.10.4.259.
  14. Klosek-Wawrzyn, E., Malolepszy, J., Murzyn, P. (2013), "Sintering behavior of kaolin with calcite", Procedia Eng., 57, 572-582. https://doi.org/10.1016/j.proeng.2013.04.073.
  15. Kozak, O., Praus, P., Machovic, V. and Klika, Z. (2010), "Adsorption of zinc and copper ions on natural and ethylenediamine modified montmorillonite", Ceramics-Silikaty, 54(1) 78-84.
  16. Krupskay, V.V., Zakusin, S.V., Tyupin, E.A., Dorzhiev, O.V., Zhukhlistov, A.P., Timofeev, M.N. and Belousov, P.E. (2017), "Experimental study of montmorillonite structure and transformation of its properties under the treatment of inorganic acid solutions", Minerals, 7(4), 49. https://doi.org/10.3390/min7040049.
  17. Meneghetti, E., Baroni, P., Vieira, R.S., Carlos da Silva, M.G., Beppu, M.M. (2010), "Dynamic adsorption of chromium ions onto natural and crosslinked chitosan membranes for wastewater treatment", Mater. Res., 13(1), 89-94. https://doi.org/10.1590/S1516-14392010000100018.
  18. Migneault, I., Dartiguenave, C., Bertrand, M.J. and Waldron, K.C. (2004), "Glutaraldehyde: Behavior in aqueous solution, reaction with proteins, and application to enzyme crosslinking", BioTechniques, 37(5), 790-802. https://doi.org/10.2144/04375RV01.
  19. Mitra, P., Sarkar, K. and Kundu, P.P. (2014), "Carboxymethyl chitosan modified montmorillonite for efficient removal of cationic dye from waste water", Defence Sci. J., 64(3), 198-208. https://doi.org/10.14429/dsj.64.7318.
  20. Monash, P. and Pugazhenthi, G. (2011), "Development of ceramic supports derived from low-cost raw materials for membrane applications and its optimization based on sintering temperature", Int. J. Appl. Ceram. Technol, 8, 227-238. https://doi.org/10.1111/j.1744-7402.2009.02443.x.
  21. Ouali, A., Heraiz, M., Sahnoune, F., Belhouchet, H., Fatmi, M. and Saheb, N. (2013), "Effect of MgO addition on the mechanical and thermal properties of mullite synthesised through reaction sintering of Al2O3 and Algerian kaolin", Am. J. Modern Phys., 2(5), 270-275. https://doi.org/10.11648/j.ajmp.20130205.16.
  22. Owoeye, F.T., Olokode, O.S., Aiyedun, P.O., Balogun, H.O. and Anyanwu, B.U. (2012), "Preparation and characterization of ceramic microfiltration membrane for water treatment", Pacific J. Sci. Technol., 13(2), 28-38.
  23. Parlayici, S., Eskizeybek, V., Avci, A. and Pehlivan, E. (2015), "Removal of chromium (VI) using activated carbon-supported functionalized carbon nanotubes", J. Nanostruct. Chem., 5(3), 255-263. https://doi.org/10.1007/s40097-015-0156-z.
  24. Pavlidou, S. and Papaspyrides, C.D. (2008), "A review on polymer-layered silicate nanocomposites", Prog. Polym. Sci., 33(12), 1119-1198. https://doi.org/10.1016/j.progpolymsci.2008.07.008.
  25. Saber-Samandari, S., Saber-Samandari, S., Heydaripour, S. and Abdouss, M. (2016), "Novel carboxymethyl cellulose based nanocomposite membrane: Synthesis, characterization and application in watertreatment", J. Environ. Manage., 166, 457-465. https://doi.org/10.1016/j.jenvman.2015.10.045.
  26. Sathiyanarayanan, P., Karunakaran, J.R., Gomathi, T. and Sudha, P.N. (2015), "Synthesis and characterization of carboxymethyl cellulose/ polyethylene glycol/montmorillonite clay blends", Int. J. Novel Trends Pharm. Sci., 5(2), 36-41.
  27. Sathiyanarayanan, P.P. and Karunakaran, R.J. (2015), "Batch adsorptive removal of copper (II) using carboxymethyl cellulose (CMC), polyethylene glycol (PEG) and montmorillonite (MMT) clay ternary blend", J. Chem. Pharm. Res., 7(4), 1099-1108.
  28. Shaheen, S.M., Derbalah, A.S., and Moghanm, F.S. (2012), "Removal of heavy metals from aqueous solution by zeolite in competitive sorption system", Int. J. Environ. Sci. Develop., 3(4), 362.
  29. Stoquarta, C., Servais, P., Berubec, P.R. and Barbeau, B. (2012), "Hybrid membrane processes using activated carbon treatment for drinking water: A review", J. Membr. Sci., 411-412, 1-12. https://doi.org/10.1016/j.memsci.2012.04.012.
  30. Validi M., Bazgir S., Rashidi A.S and Yazdanshenas, M.E. (2012), "Intercalation of methylene blue into montmorillonite at different conditions: An approach for preparing clay-based nano pigments", Ceramics-Silikaty, 56(2) 152-158.
  31. Vasanth, D., Pugazhenthi, G. and Uppaluri, R. (2011) "Fabrication and properties of low cost ceramic microfiltration membranes for separation of oil and bacteria from its solution", J. Membr. Sci., 379(1-2), 154-163. https://doi.org/10.1016/j.memsci.2011.05.050.
  32. Wang, M. and Wang, L. (2013), "Synthesis and characterization of carboxymethyl cellulose/organic montmorillonite nanocomposites and its adsorption behavior for Congo Red dye", Water Sci. Eng., 6(3), 272-282. https://doi.org/10.3882/j.issn.1674-2370.2013.03.004.
  33. Xu, Y., Ren, X. and Hanna, M.A. (2006), "Chitosan/clay nanocomposite film preparation and characterization", J. Appl. Polym. Sci., 99(4), 1684-1691. https://doi.org/10.1002/app.22664.
  34. Xu, Y., Chen, J., Chen, R., Yu, P., Guo, Sh. and Wang, X. (2019), "Adsorption and reduction of chromium (VI) from aqueous solution using polypyrrole/calcium rectorite composite adsorbent", Water Res., 160, 148-157. https://doi.org/10.1016/j.watres.2019.05.055.
  35. Zhang, G., Qin, Y., Lv, C., Liu, X., Zhao, Y. and Chen, L. (2016), "Adsorptive removal of Ni(II) ions from aqueous solution by PVDF/Gemini-ATP hybrid membrane", Membr. Water Treat., 7(3), 209-221. https://doi.org/10.12989/mwt.2016.7.3.209.
  36. Zhou, Ch., Zhang, D., Tong, D., Wua, L., Yu, W. and Ismadji S. (2012), "Paper-like composites of cellulose acetate-organo-montmorillonite for removal of hazardous anionic dye in water", Chem. Eng. J., 209, 223-234. https://doi.org/10.1016/j.cej.2012.07.107.
  37. Zorpas, A.A. (2011), "Metal selectivity from natural zeolite in sewage sludge compost. a function of temperature and contact time", Dyn. Soil Dyn. Plan, 5(2), 104-112.