Steel and Composite Structures

  • 제43권1호
  • /
  • Pages.55-66
  • /
  • 2022
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic behavior of energy dissipation shear wall with CFST column elements

  • Su, Hao (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Zhu Lihua (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Wang, Yaohong (School of Civil Engineering, Inner Mongolia University of Technology) ;
  • Feng, Lei (Inner Mongolia Power (GROUP) Co., Ldt) ;
  • Gao, Zeyu (Dongtai Municipal Education Bureau) ;
  • Guo, Yuchen (School of Highway, Chang'an University) ;
  • Meng, Longfei (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Yuan, Hanquan (School of Civil Engineering, Xi'an University of Architecture and Technology)
  • 투고 : 2021.11.08
  • 심사 : 2022.04.06
  • 발행 : 2022.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

To develop high-efficiency lateral force resistance components for high-rise buildings, a novel energy dissipation shear wall with concrete-filled steel tubular (CFST) column elements was proposed. An energy dissipation shear wall specimen with CFST column elements (GZSW) and an ordinary reinforced concrete shear wall (SW) were constructed, and experimented by low-cycle reversed loading. The mechanical characteristics of these two specimens, including the bearing capacity, ductility, energy dissipation, and stiffness degradation process, were analyzed. The finite-element model of the GZSW was established by ABAQUS. Based on this finite-element model, the effect of the placement of steel-plate energy dissipation connectors on the seismic performance of the shear wall was analyzed, and optimization was performed. The experiment results prove that, the GZSW exhibited a superior seismic performance in terms of bearing capacity, ductility, energy dissipation, and stiffness degradation, in comparison with the SW. The results calculated by the ABAQUS finite-elements model of GZSW corresponded well with the results of experiment, and it proved the rationality of the established finite-elements model. In addition, the optimal placement of the steel-plate energy dissipation connectors was obtained by ABAQUS.

키워드

과제정보

This work was supported by National Natural Science Foundation of China (51868059), Shaanxi Province Key Research and Development Program on Industry Innovation Chain (2018ZDCXL-SF-03-03-01), and Inner Mongolia Natural Science Foundation (2016BS0504).

참고문헌

  1. Al-Attraqchi, A.Y., Hashemi, M.J. and Al-Mahaidi, R. (2020). "Hybrid simulation of bridges constructed with concrete-filled steel tube columns subjected to horizontal and vertical ground motions", Bull. Earthq. Eng., 18(9), 4453-4480. https://doi.org/10.1007/s10518-020-00871-7.
  2. Azandariani, M.G., Gholhaki, M. and Kafi, M.A. (2021). "Investigation of performance of steel plate shear walls with partial plate-column connection (SPSW-PC)", Steel Compos. Struct., 39(1), 109-123. https://doi.org/10.12989/scs.2021.39.1.109.
  3. Barua, K. and Bhowmick, A.K. (2019), "Nonlinear seismic performance of code designed perforated steel plate shear walls", Steel Compos. Struct., 31(1), 85-98. http://dx.doi.org/10.12989/scs.2019.31.1.085.
  4. Chen, Y., Li, J.Z. and Lu, Z. (2017), "Experimental study and numerical simulation on hybrid coupled shear wall with replaceable coupling beams", Sustainability, 11(3), 867. https://doi.org/10.3390/su11030867.
  5. Chen, Z.H., Wu, J.S. and Liu, H.B. (2019), "Seismic behavior of steel plate-concrete shear walls with holes", Appl. Sci., 9(23), 5255. https://doi.org/10.3390/app9235255.
  6. Dan, D., Fabian, A. and Stoian, V. (2011), "Theoretical and experimental study on composite steel-concrete shear walls with vertical steel encased profiles", J. Construct. Steel Res., 67(5), 800-813. https://doi.org/10.1016/j.jcsr.2010.12.013.
  7. Falope, F.O., Pelliciari, M., Lanzoni, L. and Tarantino, A.M. (2021), "Snap-through and Eulerian buckling of the bi-stable von Mises truss in nonlinear elasticity: A theoretical, numerical and experimental investigation", Int. J. Non-Linear Mech., 134(6), 103739. https://doi.org/10.1016/j.ijnonlinmec.2021.103739.
  8. Han, Q.H., Wang, D.Y. and Zhang, Y.S. (2020). "Experimental investigation and simplified stiffness degradation model of concrete shear wall with steel connectors", Eng. Struct., 220(3), 110943 https://doi.org/10.1016/j.engstruct.2020.110943.
  9. Jia, J.F., Zhang, K.D. and Saiidi, M.S. (2020), "Seismic evaluation of precast bridge columns with built-in elastomeric pads", Soil Dyn. Earthq. Eng., 128, 105868. https://doi.org/10.1016/j.soildyn.2019.105868.
  10. Jiang, H.J., Lu, X.L., Kwan, A.K.H. and Cheung, Y.K. (2003), "Study on a seismic slit shear wall with cyclic experiment and macro-model analysis", Struct. Eng. Mech., 16(4), 371-390. https://doi.org/10.12989/sem.2003.16.4.371.
  11. Li, G.C., Qiu, Z.M. and Yang Z.J. (2020), "Seismic performance of high strength concrete filled high strength square steel tubes under cyclic pure bending", Adv. Steel Construct., 16(2), 112-123. https://doi.org/10.18057/IJASC.2020.16.2.3.
  12. Liu, X., Xu, C. and Liu, J. (2018), "Research on special-shaped concrete-filled steel tubular columns under axial compression", J. Construct. Steel Res., 147(AUG), 203-223. https://doi.org/10.1016/j.jcsr.2018.04.014.
  13. Pachideh, G. and Gholhaki, M. (2019), "Evaluation of Concrete Filled Steel Tube Column Confined with FRP", J. Testing Evaluat., 48(6), 4343-4354. https://doi.org/10.1520/JTE20180148.
  14. Pachideh, G., Gholhaki, M. and Kafi, M. (2020), "Experimental and numerical evaluation of an innovative diamond-scheme braking system equipped with a yielding damper", Steel Compos. Struct., 36(2), 197-211. https://doi.org/10.12989/scs.2020.36.2.197.
  15. Pachideh, G., Gholhaki, M. and Moshtagh, A. (2020), "An experimental study on cyclic performance of the geometrically prismatic Concrete-Filled Double Skin Steel Tubular (CFDST) Columns", Iran. J. Sci. Technol. Transact. Civil Eng., 45(2), 629-638. https://doi.org/10.1007/s40996-020-00410-z.
  16. Pachideh, G., Kafi, M. and Gholhaki, M. (2020), "Evaluation of cyclic performance of a novel bracing system equipped with a circular energy dissipater", Structures, 28, 467-181. https://doi.org/ 10.1016/j.istruc.2020.09.007.
  17. Ren, F.M., Chen, J.W., Chen, G.M. and Jiang, T. (2018), "Seismic behavior of composite shear walls incorporating concrete-filled steel and FRP tubes as boundary elements", Eng. Struct., 168, 405-419. https://doi.org/10.1016/j.engstruct.2018.04.032.
  18. Shan, Z.W., Looi, D.T.W. and Su, R.K.L. (2021), "Confinement model for RC columns strengthened with direct-fastened steel plates", Steel Compos. Struct., 39(4), 367-381. http://dx.doi.org/10.12989/scs.2021.39.4.367.
  19. Sheikhi, J., Fathi, M., Rahnavard, R. and Napolitano, R. (2021), "Numerical analysis of natural rubber bearing equipped with steel and shape memory alloys dampers", Structures., 32, 1839-1855. https://doi.org/10.1016/j.istruc.2021.03.115.
  20. Su, H., Zhu, L.H. and Wang, Y.H. (2021), "Experimental study and finite-element analysis of shear wall with CFST, column-form reinforcement, and diagonal bars", Steel Compos. Struct., 41(4), 567-580. https://doi.org/ 10.12989/scs.2021.41.4.567.
  21. Vatansever, C. and Yardimci, N. (2011), "Experimental investigation of thin steel plate shear walls with different infill-to-boundary frame connections", Steel Compos. Struct., 11(3), 251-271. https://doi.org/10.12989/scs.2011.11.3.251.
  22. Wang, Y.H., Gao, Z.Y., Han, Q., Feng, L., Su, H. and Zhao, N.N. (2018), "Experimental study on the seismic behavior of a shear wall with concrete-filled steel tubular frames and a corrugated steel plate", Struct. Des. Tall Spec. Build., 27(15), e1509. https://doi.org/10.1002/tal.1509.
  23. Xu, W.F., Yang, X., Wang, F.L. and Chi, B. (2018), "Experimental and Numerical Study on the Seismic Performance of Prefabricated Reinforced Masonry Shear Walls", Appl. Sci., 8(10), 1856. https://doi.org/10.3390/app8101856.
  24. Yadav, R., Yuan, H.H., Chen, B.C. and Lian, Z.B. (2018). "Experimental study on seismic performance of latticed CFST-RC column connected with RC web", Thin-Walled Struct., 126(S1), 258-265. https://doi.org/10.1016/j.tws.2017.11.043.
  25. Yin, Z.Z., Zhang, H. and Yang, W.W. (2019), "Study on seismic performance and damage analysis of steel plate shear wall with partially encased composite (PEC) columns", Appl. Sci., 9(5), 907. https://doi.org/10.3390/app9050907.
  26. Younes, S.M., Ramadan, H.M. and Mourad, S.A. (2016), "Stiffening of short small-size circular composite steel-concrete columns with shear connectors", J. Adv. Res., 7(3), 525-538. https://doi.org/10.1016/j.jare.2015.08.001.
  27. Zhang, J.C., Liu, X. Y., Zeng, L., Du, G.F. and Xiao, J.H. (2021), "Seismic behavior of cross-shaped concrete-filled steel tubular columns", Steel Compos. Struct., 40(3), 405-420. http://dx.doi.org/10.12989/scs.2021.40.3.405.
  28. Zhou, J., Fang, X.D. and Jiang, Y. (2020), "Cyclic behavior of concrete-encased high-strength concrete-filled steel tube composite walls: an experiment", Struct. Concrete., 22(2), 691-708. https://doi.org/10.1002/suco.201900233.