DOI QR코드

DOI QR Code

Cyclic loading behavior of high-strength steel framed-tube structures with replaceable shear links constructed using Q355 structural steel

  • Guo, Yan (School of Civil and Geodesy Engineering, Shaanxi College of Communication Technology) ;
  • Lian, Ming (School of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Zhang, Hao (School of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Cheng, Qianqian (School of Civil Engineering, Xi'an University of Architecture & Technology)
  • 투고 : 2021.08.30
  • 심사 : 2022.03.28
  • 발행 : 2022.03.25

초록

The rotation capacities of the plastic hinges located at beam-ends are significantly reduced in traditional steel framed-tube structures (SFTSs) because of the small span-to-depth ratios of the deep beams, leading to the low ductility and energy dissipation capacities of the SFTSs. High-strength steel framed-tube structures with replaceable shear links (HSSFTS-RSLs) are proposed to address this issue. A replaceable shear link is located at the mid-span of a deep spandrel beam to act as a ductile fuse to dissipate the seismic energy in HSSFTS-RSLs. A 2/3-scaled HSSFTS-RSL specimen with a shear link fabricated of high-strength low-alloy Q355 structural steel was created, and a cyclic loading test was performed to study the hysteresis behaviors of this specimen. The test results were compared to the specimens with soft steel shear links in previous studies to investigate the feasibility of using high-strength low-alloy steel for shear links in HSSFTS-RSLs. The effects of link web stiffener spaces on the cyclic performance of the HSSFTS-RSLs with Q355 steel shear links were investigated based on the nonlinear numerical analysis. The test results indicate that the specimen with a Q355 steel shear link exhibited a reliable and stable seismic performance. If the maximum interstory drift of HSSFTS-RSL is designed lower than 2% under earthquakes, the HSSFTS-RSLs with Q355 steel shear links can have similar seismic performance to the structures with soft steel shear links, even though these shear links have similar shear and flexural strength. For the Q355 steel shear links with web height-to-thickness ratios higher than 30.7 in HSSFTS-RSLs, it is suggested that the maximum intermediate web stiffener space is decreased by 15% from the allowable space for the shear link in AISC341-16 due to the analytical results.

키워드

과제정보

The authors are grateful for the partial financial support from the scientific research plan projects of the Shaanxi Education Department [Grant No. 20JK0523].

참고문헌

  1. AISC 358-16 (2016), Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications, Chicago, U.S.A.
  2. Alavi A., Rahgozar P. and Rahgozar R. (2018), "Minimum-Weight Design of High-Rise Structures Subjected to Flexural Vibration at a Desired Natural Frequency", Struct. Des. Tall Spec. Build., 27(15). https://doi.org/10.1002/tal.1515.
  3. ANSI/AISC 341-16 (2016), Seismic Provision for Structure Steel Buildings, Chicago, U.S.A.
  4. Bouwkamp, J., Vetr. M.G. and Ghamari, A. (2016), "An analytical model for inelastic cyclic response of eccentrically braced frame with vertical shear link (V-EBF)", Case Studies Struct. Eng., 2016, 6, 31-44. https://doi.org/10.1016/j.csse.2016.05.002.
  5. Chaboche, J.L. (1989), "Constitutive equations for cyclic plasticity and cyclic viscoplasticity", Int. J. Plasticity, 5(3), 247-302. https://doi.org/10.1016/0749-6419(89)90015-6.
  6. Dadkhah, M.M., Kamgar, R. and Heidarzadeh, H. (2021), "Improving the nonlinear seismic performance of steel moment-resisting frames with minimizing the ductility damage index", SN Appl. Sci., 3(86), 1-14. https://doi.org/10.1007/s42452-021-04141-2.
  7. Dusicka, P., Itani, A.M. and Buckle, I. G. (2010), "Cyclic behavior of shear links of various grades of plate steel", J. Struct. Eng., 136(4), 370-378. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000131.
  8. Feng, P., Cheng, S., Bai, Y. and Ye, L. (2015), "Mechanical behavior of concrete-filled square steel tube with FRP-confined concrete core subjected to axial compression", Compos. Struct., 123, 312-24. https://doi.org/10.1016/j.compstruct.2014.12.053.
  9. Fortney, P.J., Shahrooz, B.M. and Rassati, G.A. (2007), "Large-scale testing of a replaceable "fuse" steel coupling beam", J. Struct. Eng., 133(12), 1801-1807. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:12(1801).
  10. GB50017-2017 (2017), Code for Design of Steel Structures, Beijing, China.
  11. Ghobarah, A. (2001), "Performance-based design in earthquake engineering: state of development", Eng. Struct., 23(8), 878-884. https://doi.org/10.1016/S0141-0296(01)00036-0.
  12. JGJ/T101-2015 (2015), Specification for Seismic Test of Buildings, Beijing, China.
  13. Ji, X., Wang, Y., Zhang, J. and Okazazi T. (2017), "Seismic behavior and fragility curves of replaceable steel coupling beams with slabs", Eng. Struct., 150, 622-635. https://doi.org/10.1016/j.engstruct.2017.07.045.
  14. Kamgar R. and Rahgozar P. (2020), "Optimum location for the belt truss system for minimum roof displacement of steel buildings subjected to critical excitation", Steel Compos. Struct., 37(4), 463-479. https://doi.org/10.12989/scs.2020.37.4.463.
  15. Kamgar, R. and Babadaei, M.R. (2021), "Numerical study for evaluating the effect of length to height ratio on the behavior of concrete frame retrofitted with steel infill plates", Practice Periodical Struct. Des. Construct., 27(1). https://doi.org/10.1061/(ASCE)SC.1943-5576.0000632.
  16. Kamgar, R. and Rahgozar, P. (2019), "Reducing static roof displacement and axial forces of columns in tall buildings based on obtaining the best locations for multi-rigid belt truss outrigger systems", Asian J. Civil Engi. (Build. Housing), 20(6). https://doi.org/10.1007/s42107-019-00142-0.
  17. Kamgar, R. and Saadatpour, M.M. (2012), "A simple mathematical model for free vibration analysis of combined system consisting of framed tube, shear core, belt truss and outrigger system with geometrical discontinuities", Appl. Mathem. Model, 36(10), 4918-4930. https://doi.org/10.1016/j.apm.2011.12.029.
  18. Kamgar, R., Heidarzadeh, H. and Samani, M.R.B. (2021), "Evaluation of buckling load and dynamic performance of steel shear wall retrofitted with strips made of shape memory alloy", Scientia Iranica, 28(3), 1096-1108. https://doi.org/10.24200/SCI.2020.52994.2991.
  19. Kamgar, R., Rahgozar, R. and Tavakoli, R. (2018), "The best location of belt truss system in tall buildings using multiple criteria subjected to blast loading", Civil Eng. J., 4(6), 1338-1353. https://doi.org/10.28991/cej-0309177.
  20. Lee, J., Bang, M. and Kim, J.Y. (2008), "An analytical model for high-rise wall-frame structures with outriggers", Struct. Des. Tall Spec. Build., 17(4), 839-851. https://doi.org/10.1002/tal.406/
  21. Li, S., Sun, C., Li, X., Tian, J. and Gao, D. (2021), "Seismic design lateral force distribution based on inelastic state of K-eccentric brace frames combined with high strength steel", Structures, 29(3), 1748-1762. https://doi.org/10.1016/j.istruc.2020.12.046.
  22. Lian, M. and Su, M. (2017), "Seismic performance of high-strength steel fabricated eccentrically braced frame with vertical shear link", J. Construct. Steel Res., 137, 262-285. https://doi.org/10.1016/j.jcsr.2017.06.022.
  23. Lian, M., Cheng, Q.Q., Zhang, H. and Su, M.Z. (2020), "Numerical study of the seismic behavior of steel frame-tube structures with bolted web-connected replaceable shear links", Steel Compos. Struct., 35(3), 305-325. https://doi.org/10.12989/scs.2020.35.3.305.
  24. Malekinejad M., Rahgozar R., Malekinejad A. and Rahgozar P. (2016), "A continuous-discrete approach for evaluation of natural frequencies and mode shapes of high-rise buildings", Int. J. Adv. Struct. Eng., 8(3), 269-280. https://doi.org/10.1007/s40091-016-0129-6.
  25. McCormick, D., Aburano, H., Ikenaga, M. and Nakashima, M. (2008), "Permissible residual deformation level for building structures considering both safety and human elements", Proc., 14th World Conf. on Earthquake Engineering, Beijing.
  26. Moon, K.S. (2010), "Stiffness-based design methodology for steel braced tube structures: a sustainable approach", Steel Construct., 32(10), 3163-3170. https://doi.org/10.1016/j.engstruct.2010.06.004.
  27. Murray, T.M. and Summer, E.A. (2003), Extended End-Plate Moment Connection-Seismic and Wind Applications, Steel Design Guide Series 4, AISC Design Guide 4. American Institute of Steel Construction, Chicago, USA.
  28. Okazaki, T. and Engelhardt, M.D. (2007), "Cyclic loading behavior of EBF links constructed of ASTM A992 steel", J. Construct. Steel Res., 63, 751-765. https://doi.org/10.1016/j.jcsr.2006.08.004.
  29. Qu, Z., Ji, X., Shi, X., Wang, Y. and Liu, H. (2020). "Cyclic loading test of steel coupling beams with mid-span friction dampers and RC slabs", Eng. Struct., 203, 109876. https://doi.org/10.1016/j.engstruct.2019.109876.
  30. Rahgoza, R. and Sharifi, Y. (2009), "An approximate analysis of combined system of framed tube, shear core and belt truss in high-rise buildings", Struct. Des. Tall Spec. Build., 18(6), 607-624. https://doi.org/10.1002/tal.503.
  31. Rahgozar, P. (2020), "Free Vibration of Tall Buildings using Energy Method and Hamilton's Principle", Civil Eng. J., 6(5), 945-953. https://doi.org/10.28991/cej-2020-03091519.
  32. Rahgozar, R., Ahmadi, A.R. and Sharifi, Y. (2010), "A simple mathematical model for approximate analysis of tall buildings", Appl. Mathem. Model, 34(9), 2437-2451. https://doi.org/10.1016/j.apm.2009.11.009.
  33. Shen, Y., Christopoulos, C., Mansour, N. and Tremblay, R. (2011), "Seismic design and performance of steel moment resisting frames with nonlinear replaceable links", J. Struct. Eng., 137(10), 1107-1117. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000359.
  34. Tavakoli, R., Kamgar, R. and Rahgozar, R. (2019), "Seismic performance of outrigger braced system based on finite element and component mode synthesis methods", Iran. J. Sci. Technol., Transactions Civil Eng., 1(1), 1-9. https://doi.org/10.1007/s40996-019-00299-3.
  35. Tavakoli, R., Kamgar, R. and Rahgozar, R. (2020), "Optimal location of energy dissipation outrigger in high-rise building considering nonlinear soil-structure interaction effects", Periodica Polytechnica Civil Eng., 64(3), 887-903. https://doi.org/10.3311/PPci.14673.
  36. Vetr, M.G. and Ghamari, A. (2019), "Experimentally and analytically study on eccentrically braced frame with vertical shear links", Struct. Des. Tall Build., 28(5), e1587. https://doi.org/10.1002/tal.1587.
  37. Vetr, M.G., Ghamari A. and Bouwkamp J. (2017), "Investigating the nonlinear behavior of Eccentrically Braced Frame with vertical shear links (V-EBF)", J. Build. Eng., 10, 47-59. https://doi.org/10.1016/j.jobe.2017.02.002.
  38. Zhang, H., Su, M., Lian, M., Cheng, Q., Guan, B. and Gong, H. (2020), "Experimental and numerical study on the seismic behavior of high-strength steel framed-tube structures with endplate-connected replaceable shear links", Eng. Struct., 223, 111172. https://doi.org/10.1016/j.engstruct.2020.111172.