과제정보
본 결과물은 환경부의 재원으로 한국환경산업기술원의 재활용 저해제품 순환이용성 개선 기술개발사업의 지원을 받아 연구되었습니다(202003080006).
참고문헌
- D. P. Steen and P. R. Ashurst, "Carbonated Soft Drinks: Formulation and Manufacture", John Wiley & Sons (2008).
- N. C. Wyeth, "Inventing the PET Bottle", Research-Technology Management, 31, 53 (1988).
- M.-Y. Lyu and Y. Pae, "Bottom design of carbonated soft drink poly(ethylene terephthalate) bottle to prevent solvent cracking", J. Appl. Polym. Sci., 88, 1145 (2003).
- B. Demirel and F. Daver, "The effects on the properties of PET bottles of changes to bottle-base geometry", J. Appl. Polym. Sci., 114, 3811 (2009).
- B. Tekkanat, B. L. McKinney, and D. Behm, "Environmental stress cracking resistance of blow moded poly(ethylene terephthalate) containers", Polym. Eng. Sci., 32, 393 (1992).
- E. D. Morrison, M. W. Malvey, R. D. Johnson, J. L. Anacker, and K. A. Brown, "Effect of chemical environments on stress cracking of poly(ethylene terephthalate) beverage bottles", Polym. Test., 27, 660 (2008).
- S. H. Cho, J. S. Hong, and M.-Y Lyu, "Investigation of the Molding Conditions to Minimize Residual Stress and Shrinkage in Injection Molded Preform of PET Bottle", Polymer(Korea), 35, 467 (2011).
- N. H. Kim, I. Y. Woo, K. W. Nam, B. R. Yeon, M. R. Kim, and M.-Y. Lyu, "Comparison of Injection Molding Characteristics according to Thickness Variations of Preform for PET bottle", Elast. Compos., 56, 164 (2021).
- B. Ottmar, "Stretch blow molding", New York, William Andrew (2016).
- B. Demirel and F. Daver, "Optimization of poly(ethylene terephthalate) bottles via numerical modeling: A statistical design of experiment approach", J. Appl. Polym. Sci., 114, 1126 (2009).
- W. Yuan, L. H. Xie, G. M. Zhang, D. Z. Liao, and J. D. Lu, "Research on PET Beer Bottle Structural Parameters and its Strength", Adv. Mat. Res., 641, 488 (2013).
- S. Ge-Zhang, M. Song, Z. Huang, M. Li, and L. Mu, "Comparison and Optimization: Research on the Structure of the PET Bottle Bottom Based on the Finite Element Method", Polymers (Basel), 14, 3174 (2022).
- Q. C. Hu, W. J. Sha, Y. H. Li, and Y. S. Wang, "Structural Optimization and Lightweight Design of PET Bottle Based on ABAQUS", Adv. Mat. Res., 346, 558 (2011).
- T. T. Nguyen, Y. M. Luo, L. Chevalier, and F. Lesueur, "Stochastic simulation of top load test on poly(ethylene terephthalate) bottles: An experimental study on dispersion of elastic properties", J. Appl. Polym. Sci., 138, 50837 (2021).
- M.-Y. Lyu, "Polymer Shaping Process and Applications of CAE", Polymer Science and Technology, 14, 668 (2003).
- H. Attar, Y. M. Luo, L. Chevalier, T. T. Nguyen, and F. Detrez, "Identification of anisotropic properties of polymer sheets from heterogeneous biaxial tests", Polym. Test., 115, 107721 (2022).
- H. O. Onyishi and C. K. Oluah, "Effect of stretch ratio on the induced crystallinity and mechanical properties of biaxially stretched PET", Phase Transitions, 93, 924 (2020).
- H.-M . Son, S.-H. Yoon, K.-H. Lee, and M .-Y. Lyu, "3-Dimensional Thermoforming Computer Simulation Considering Orthotropic Property of Film", Elast. Compos., 57, (2022).
- M.-Y. Lyu, H. C. Kim, J. S. Lee, H. C. Shin, and Y. Pae, "Causes of Cracks in Petaloid Bottom of Carbonated PET Bottle", International Polymer Processing, 16, 72 (2001).
- M.-Y. Lyu and Y. H. Kim, "Investigaion of Design Parameters and Novel Design of Petaloid PET Bottles", International Polymer Processing, 17, 273 (2002).