과제정보
본 연구는 정부(교육부)의 재원으로 한국연구재단 이공학 개인기초연구지원사업의 지원(NRF-2018R1D1A1B07043353)에 의해 수행되었습니다.
참고문헌
- Ahmad, S. (2003). Reinforcement corrosion in concrete structures, its monitoring and service life prediction--a review. Cement and concrete composites, 25(4-5), 459-471. https://doi.org/10.1016/S0958-9465(02)00086-0
- Ai, Z., Sun, W., Jiang, J., Song, D., Ma, H., Zhang, J., & Wang, D. (2016). Passivation characteristics of alloy corrosion-resistant steel Cr10Mo1 in simulating concrete pore solutions: combination effects of pH and chloride. Materials, 9(9), 749. https://doi.org/10.3390/ma9090749
- Al-Amoudi, O. S. B. (1985). Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. King Fahd University of Petroleum and Minerals (Saudi Arabia).
- Angst, U. M., Geiker, M. R., Michel, A., Gehlen, C., Wong, H., Isgor, O. B., Hornbostel, K. (2017). The steel-concrete interface. Materials and Structures, 50(2), 1-24. https://doi.org/10.1617/s11527-016-0885-6
- Ann, K. Y., & Song, H.-W. (2007). Chloride threshold level for corrosion of steel in concrete. Corrosion science, 49(11), 4113-4133. https://doi.org/10.1016/j.corsci.2007.05.007
- Bazan, A., Galvez, J., Reyes, E., & Gale-Lamuela, D. (2018). Study of the rust penetration and circumferential stresses in reinforced concrete at early stages of an accelerated corrosion test by means of combined SEM, EDS and strain gauges. Construction and Building Materials, 184, 655-667. https://doi.org/10.1016/j.conbuildmat.2018.06.195
- Bertolini, L., Elsener, B., Pedeferri, P., Redaelli, E., & Polder, R. B. (2013). Corrosion of steel in concrete: prevention, diagnosis, repair: John Wiley & Sons.
- Burtuujin, G., Son, D., Jang, I., Yi, C., & Lee, H. (2020). Corrosion Behavior of Pre-Rusted Rebars in Cement Mortar Exposed to Harsh Environments. Applied Sciences, 10(23), 8705. https://doi.org/10.3390/app10238705
- De La Fuente, D., D?az, I., Alc?ntara, J., Chico, B., Simancas, J., Llorente, I., Morcillo, M. (2016). Corrosion mechanisms of mild steel in chloride-rich atmospheres. Materials and Corrosion, 67(3), 227-238. doi:10.1002/maco.201508488
- Goto, S., & Roy, D. M. (1981). The effect of w/c ratio and curing temperature on the permeability of hardened cement paste. Cement and Concrete Research, 11(4), 575-579. https://doi.org/10.1016/0008-8846(81)90087-9
- Goyal, A., Pouya, H. S., Ganjian, E., & Claisse, P. (2018). A review of corrosion and protection of steel in concrete. Arabian Journal for Science and Engineering, 43(10), 5035-5055. https://doi.org/10.1007/s13369-018-3303-2
- Hua, Y., Mohammed, S., Barker, R., & Neville, A. (2020). Comparisons of corrosion behaviour for X65 and low Cr steels in high pressure CO2-saturated brine. Journal of Materials Science & Technology, 41, 21-32. https://doi.org/10.1016/j.jmst.2019.08.050
- Jumaat, M. Z., Kabir, M., & Obaydullah, M. (2006). A review of the repair of reinforced concrete beams. Journal of Applied Science Research, 2(6), 317-326.
- Li, X., Wang, H., Wang, J., & Liu, J. (2021). Experimental Analysis of Reinforcement Rust in Cement under Corrosive Environment. Coatings, 11(2), 241. https://doi.org/10.3390/coatings11020241
- Liu, T., & Weyers, R. (1998). Modeling the dynamic corrosion process in chloride contaminated concrete structures. Cement and Concrete Research, 28(3), 365-379. https://doi.org/10.1016/S0008-8846(98)00259-2
- Lopez, W., Gonzalez, J., & Andrade, C. (1993). Influence of temperature on the service life of rebars. Cement and Concrete Research, 23(5), 1130-1140. https://doi.org/10.1016/0008-8846(93)90173-7
- Ming, J., & Shi, J. (2019). Distribution of corrosion products at the steel-concrete interface: Influence of mill scale properties, reinforcing steel type and corrosion inducing method. Construction and Building Materials, 229, 116854. https://doi.org/10.1016/j.conbuildmat.2019.116854
- Ming, J., Shi, J., & Sun, W. (2020). Effects of mill scale and steel type on passivation and accelerated corrosion behavior of reinforcing steels in concrete. Journal of Materials in Civil Engineering, 32(4), 04020029. https://doi.org/10.1061/(asce)mt.1943-5533.0003139
- Popov, B. N. (2015). Corrosion engineering: principles and solved problems: Elsevier.
- Sagoe-Crentsil, K., & Glasser, F. P. (1993). "Green rust", iron solubility and the role of chloride in the corrosion of steel at high pH. Cement and Concrete Research, 23(4), 785-791. https://doi.org/10.1016/0008-8846(93)90032-5
- Tahri, W., Hu, X., Shi, C., & Zhang, Z. (2021). Review on corrosion of steel reinforcement in alkali-activated concretes in chloride-containing environments. Construction and Building Materials, 293, 123484. https://doi.org/10.1016/j.conbuildmat.2021.123484
- Tuutti, K. (1982). Corrosion of steel in concrete. Lund University,
- Vera, R., Villarroel, M., Carvajal, A., Vera, E., & Ortiz, C. (2009). Critical thickness of rust layer at inner and out surface cracking of concrete cover in reinforced concrete structures. Materials Chemistry and Physics, 114(1), 467-474. https://doi.org/10.1016/j.matchemphys.2008.09.063
- Zhao, Y., Yu, J., Wu, Y., & Jin, W. (2012). Critical thickness of rust layer at inner and out surface cracking of concrete cover in reinforced concrete structures. Corrosion science, 59, 316-323. https://doi.org/10.1016/j.corsci.2012.03.018