DOI QR코드

DOI QR Code

Prognosis of aerodynamic coefficients of butterfly plan shaped tall building by surrogate modelling

  • 투고 : 2021.10.06
  • 심사 : 2022.03.27
  • 발행 : 2022.04.25

초록

Irregularity in plan shape is very common for any type of building as it enhances better air ventilation for the inhabitants. Systematic opening at the middle of the facades makes the appearance of the building plan as a butterfly one. The primary focus of this study is to forecast the force, moment and torsional coefficient of a butterfly plan shaped tall building. Initially, Computational Fluid Dynamics (CFD) study is done on the building model based on Reynolds averaged Navier Stokes (RANS) k-epsilon turbulence model. Fifty random cases of irregularity and angle of attack (AOA) are selected, and the results from these cases are utilised for developing the surrogate models. Parametric equations are predicted for all these aerodynamic coefficients, and the training of these outcomes are also done for developing Artificial Neural Networks (ANN). After achieving the target acceptance criteria, the observed results are compared with the primary CFD data. Both parametric equations and ANN matched very well with the obtained data. The results are further utilised for discussing the effects of irregularity on the most critical wind condition.

키워드

참고문헌

  1. ANSYS Inc. (2020), ANSYS FLUENT 12.0/12.1 Documentation
  2. ASCE 7-10 (2010), Minimum Design Loads for Buildings and Other Structures, Structural Engineering Institute of the American Society of Civil Engineering, Reston.
  3. Bairagi, A.K. and Dalui, S.K. (2018), "Comparison of aerodynamic coefficients of setback tall buildings due to wind load", Asian J. Civil Eng., 19(2), 205-221. https://doi.org/10.1007/s42107-018-0018-3.
  4. Bhattacharyya, B. and Dalui, S.K. (2018), "Investigation of mean wind pressures on 'E'plan shaped tall building", Wind Struct., 26(2), 99-114. https://doi.org/10.12989/was.2018.26.2.099.
  5. Bitsuamlak, G.T., Bedard, C. and Stathopoulos, T. (2007), "Modeling the effect of topography on wind flow using a combined numerical-neural network approach", J. Comput. Civil Eng., 21(6), 384-392. https://doi.org/10.1061/(ASCE)0887-3801(2007)21:6(384).
  6. Bhattacharjee, S., Banerjee, S., Majumdar, S.G., Dey, A. and Sanyal, P. (2021), "Effects of irregularity on a butterfly planshaped tall building under wind load", J. Institution Eng. (India): Series A, 102(2), 451-467. https://doi.org/10.1007/s40030-021-00511-6.
  7. Bayraktar, E., Mierka, O. and Turek, S. (2012), "Benchmark computations of 3D laminar flow around a cylinder with CFX, OpenFOAM and FeatFlow", Int. J. Comput. Sci. Eng., 7(3). 253-266. https://doi.org/10.1504/IJCSE.2012.048245
  8. Celik, I.B., Ghia, U. and Roache, P.J. (2008), "Procedure for estimation and reporting of uncertainty due to discretisation in CFD applications", J. Fluids Eng. -T ASME, 130(7).
  9. Chakraborty, S., Dalui, S.K. and Ahuja, A.K. (2014), "Wind load on irregular plan shaped tall building - A case study", Wind Struct., 19(1), 59-73. https://doi.org/10.12989/was.2014.19.1.059.
  10. Dagnew, A.K. and Bitsuamlak, G.T. (2010, May), "LES evaluation of wind pressures on a standard tall building with and without a neighboring building", In the Fifth International Symposium on Computational Wind Engineering.
  11. Dalui, S.K. (2008), Wind Effects on Tall Buildings with Peculiar Shapes. Ph.D. Dissertation, IIT Roorkee, India.
  12. Elshaer, A., Bitsuamlak, G.T. and El Damatty A. (2017), "Enhancing wind performance of tall buildings using corner aerodynamic optimisation", Eng. Struct., 136, 133-148. https://doi.org/10.1016/j.engstruct.2017.01.019.
  13. Elshaer, A., Aboshosha, H., Bitsuamlak, G., El Damatty, A. and Dagnew, A. (2016), "LES evaluation of wind-induced responses for an isolated and a surrounded tall building", Eng. Struct., 115, 179-195. https://doi.org/10.1016/j.engstruct.2016.02.026.
  14. Wright, N. (2004), Recommendations on the Use of CFD in Wind Engineering. Impact of.
  15. Gomes, M.G., Rodrigues, A.M. and Mendes, P. (2005), "Experimental and numerical study of wind pressures on irregular-plan shapes", J. Wind Eng. Ind. Aerod., 93(10), 741-756. https://doi.org/10.1016/j.jweia.2005.08.008.
  16. Hagan, M.T. and Menhaj, M.B. (1994), "Training feedforward networks with the Marquardt algorithm", IEEE Transact. Neural Networks, 5(6), 989-993. https://doi.org/10.1109/72.329697.
  17. He, Y., Zhang, L., Chen, Z. and Li, C. Y. (2022), "A framework of structural damage detection for civil structures using a combined multi-scale convolutional neural network and echo state network", Eng. Comput., 1-19. https://doi.org/10.1007/s00366-021-01584-4.
  18. Herrmann, B., Baddoo, P.J., Semaan, R., Brunton, S.L. and McKeon, B.J. (2021), "Data-driven resolvent analysis", J. Fluid Mech., 918.
  19. Huang, S., Li, Q.S., Xu, S. (2007), "Numerical evaluation of wind effects on a tall steel building by CFD", J. Constr. Steel Res. 63, 612-627. https://doi.org/10.1016/j.jcsr.2006.06.033
  20. Hunter, D., Yu, H., Pukish III, M.S., Kolbusz, J. and Wilamowski, B.M. (2012), "Selection of proper neural network sizes and architectures-A comparative study", IEEE Transact. Ind. Informatic., 8(2), 228-240. https://doi.org/10.1109/TII.2012.2187914.
  21. IS 875 (2015), Indian Standard Code of Practice for Design Loads (Other Than Earthquake) for Buildings and Structures, Part 3 (Wind Loads), Bureau of Indian Standards, New Delhi
  22. Karsoliya, S. (2012), "Approximating number of hidden layer neurons in multiple hidden layer BPNN architecture", Int. J. Eng. Trends Technol., 3(6), 714-717.
  23. Levenberg, K. (1944), "A method for the solution of certain non-linear problems in least squares", Quarter. Appl. Mathem., 2(2), 164-168. https://doi.org/10.1090/qam/10666
  24. Kim, Y.C. and Kanda, J. (2010a), "Characteristics of aerodynamic forces and pressures on square plan buildings with height variations", J. Wind Eng. Ind. Aerod., 98, 449-465. https://doi.org/10.1016/j.jweia.2010.02.004
  25. Kim, Y.C. and Kanda, J. (2010b), "Effects of taper and set-back on wind force and wind-induced response of tall buildings", Wind Struct., 13(6), 499-517. https://doi.org/10.12989/was.2010.13.6.499.
  26. Kim, Y.M. and You, K.P. (2002), "Dynamic responses of a tapered tall building to wind load", J. Wind Eng. Ind. Aerod., 90, 1771-1782. https://doi.org/10.1016/S0167-6105(02)00286-6.
  27. Kim, Y.M., You, K.P. and Ko, N.H. (2008), "Across-wind response of an aeroelastic tapered tall building", J. Wind Eng. Ind. Aerod., 96, 1307-1319. https://doi.org/10.1016/j.jweia.2008.02.038.
  28. Kumar, D. and Dalui, S.K. (2017), "Effect of internal angles between limbs of cross plan shaped tall building under wind load", Wind Struct., 24(2), 95-118. https://doi.org/10.12989/was.2017.24.2.095.
  29. Li, C.Y., Chen, Z., Tse, T.K., Weerasuriya, A.U., Zhang, X., Fu, Y. and Lin, X. (2021), "Establishing direct phenomenological connections between fluid and structure by the Koopman-Linearly Time-Invariant analysis", Phys. Fluids, 33(12), 121707. https://doi.org/10.1063/5.0075664.
  30. Li, C.Y., Chen, Z., Tse, T.K., Weerasuriya, A.U., Zhang, X., Fu, Y. and Lin, X. (2022), "A parametric and feasibility study for data sampling of the dynamic mode decomposition: range, resolution, and universal convergence states", Nonlinear Dyn., 1-25. https://doi.org/10.1007/s11071-021-07167-8.
  31. Li, Y. and Li, Q. (2016), "Across-wind dynamic loads on L-shaped tall buildings", Wind Struct., 23(5), 385-403. https://doi.org/10.12989/was.2016.23.5.385.
  32. Lo, Y.L., Kim, Y.C. and Li, Y.C. (2016), "Downstream interference effect of high-rise buildings under turbulent boundary layerflow", J. Wind Eng. Ind. Aerod., 159, 19-35. https://doi.org/10.1016/j.jweia.2016.10.002.
  33. Mallick, M., Mohanta, A., Kumar, A. and Patra, K. (2020), "Gene-expression programming for the assessment of surface mean pressure coefficient on building surfaces", Build. Simulat., 13(2), 401-418. https://doi.org/10.1007/s12273-019-0583-8.
  34. Mandal, S., Dalui, S.K. and Bhattacharya, S. (2021), "Wind induced response of corner modified 'U' plan shaped tall building", Wind Struct., 32(6), 521-537. https://doi.org/10.12989/was.2021.32.6.521.
  35. Marquardt, D.W. (1963), "An algorithm for least-squares estimation of nonlinear parameters", J. Soc. Ind. Appl. Mathem., 11(2), 431-441. https://doi.org/10.1137/0111030.
  36. Meng, F.Q., He, B.J., Zhu, J., Zhao, D.X., Darko, A. and Zhao, Z. Q. (2018), "Sensitivity analysis of wind pressure coefficients on CAARC standard tall buildings in CFD simulations", J. Build. Eng., 16, 146-158. https://doi.org/10.1016/j.jobe.2018.01.004.
  37. Muehleisen, R.T. and Patrizi, S. (2013), "A new parametric equation for the wind pressure coefficient for low-rise buildings", Energy Build., 57, 245-249. https://doi.org/10.1016/j.enbuild.2012.10.051.
  38. Mukherjee, S., Chakraborty, S., Dalui, S.K. and Ahuja, A.K. (2014), "Wind-induced pressure on "Y" plan shape tall building. Wind Struct., 19(5), 523-540. https://doi.org/10.12989/was.2014.19.5.523
  39. Nazghelichi, T., Aghbashlo, M. and Kianmehr, M.H. (2011), "Optimization of an artificial neural network topology using coupled response surface methodology and genetic algorithm for fluidized bed drying", Comput. Electronic. Agric., 75(1), 84-91. https://doi.org/10.1016/j.compag.2010.09.014.
  40. Obasaju, E. (1992), "Measurement of forces and base overturning moments on the CAARC tall building model in a simulated atmospheric boundary layer", J. Wind Eng. Ind. Aerod., 40, 103-126. https://doi.org/10.1016/0167-6105(92)90361-D.
  41. Paul, R. and Dalui, S.K. (2016), "Wind effects on "Z" plan-shaped tall building: a case study", Int. J. Adv. Struct. Eng., 8, 319-335. https://doi.org/10.1007/s40091-016-0134-9
  42. Paul, R. and Dalui, S. (2021), "Shape optimization to reduce wind pressure on the surfaces of a rectangular building with horizontal limbs", Periodica Polytechnica Civil Eng., 65(1), 134-149. https://doi.org/10.3311/PPci.16888.
  43. Paul, R. and and Dalui, S.K. (2020), "Optimisation of alongwind and crosswind force coefficients on a tall building with horizontal limbs using surrogate modeling", Struct. Des. Tall Spec. Build., e1830. https://doi.org/10.3311/PPci.16888.
  44. Raissi, M., Wang, Z., Triantafyllou, M.S. and Karniadakis, G.E. (2019), "Deep learning of vortex-induced vibrations", J. Fluid Mech., 861, 119-137. https://doi.org/10.1017/jfm.2018.872.
  45. Rajasekarababu, K.B., Vinayagamurthy, G. and Selvi Rajan, S. (2019), "Experimental and computational investigation of outdoor wind flow around a setback building", Build. Simul., 12, 891-904. https://doi.org/10.1007/s12273-019-0514-8.
  46. Rowley, C.W., Mezic, I., Bagheri, S., Schlatter, P. and Henningson, D.S. (2009), "Spectral analysis of nonlinear flows", J. Fluid Mech., 641, 115-127. https://doi.org/10.1017/S0022112009992059.
  47. Sanyal, P. and Dalui, S.K. (2018), "Effects of courtyard and opening on a rectangular plan shaped tall building under wind load", Int. J. Adv. Struct. Eng., 10(2), 169-188. https://doi.org/10.1007/s40091-018-0190-4
  48. Sanyal, P. and Dalui, S.K. (2020), "Effect of corner modifications on "Y" plan shape tall building under wind load", Wind Struct., 30(3), 245-260. https://doi.org/10.12989/was.2020.30.3.245.
  49. Sanyal, P. and Dalui, S.K. (2021a), "Effects of internal angle between limbs of "Y" plan shaped tall building under wind load", J. Build. Eng., 33(2021), 101843. https://doi.org/10.1016/j.jobe.2020.101843
  50. Sanyal, P. and Dalui, S.K. (2021b), "Effects of side ratio for 'Y'plan shaped tall building under wind load", Build. Simulat., 14(4), 1221-1236. https://doi.org/10.1007/s12273-020-0731-1
  51. Sanyal, P. and Dalui, S.K. (2022), "Forecasting of aerodynamic coefficients of tri-axially symmetrical Y plan shaped tall building based on CFD data trained ANN", J. Build. Eng., 47, 103889. https://doi.org/10.1016/j.jobe.2021.103889.
  52. Schmid, P.J. (2010), "Dynamic mode decomposition of numerical and experimental data", J. Fluid Mech., 656, 5-28. https://doi.org/10.1017/S0022112010001217.
  53. Schmidt, O.T., Towne, A., Rigas, G., Colonius, T. and Bres, G.A. (2018), "Spectral analysis of jet turbulence", J. Fluid Mech., 855, 953-982. https://doi.org/10.1017/jfm.2018.675.
  54. Singh, J. and Roy, A.K. (2019), "Effects of roof slope and wind direction on wind pressure distribution on the roof of a square plan pyramidal low-rise building using CFD simulation", Int. J. Adv. Struct. Eng., 11(2), 231-254 https://doi.org/10.1007/s40091-019-0227-3
  55. Systat Stware Inc. (2002), TableCurve 3D V4.0
  56. Tanaka, H. and Lawen, N. (1986), "Test on the CAARC standard tall building model with a length scale of 1: 1000", J. Wind Eng. Ind. Aerod., 25(1), 15-29. https://doi.org/10.1016/0167-6105(86)90102-9.
  57. Taranath, B.S. (2016), Tall Building Design: Steel, Concrete and Composite Systems, CRC Press, United States of America.
  58. Thordal, M. and Koss, H. (2019), "Review for practical application of CFD for the determination of wind load on high-rise buildings", J. Wind Eng. Ind. Aerod., 186. 155-168. https://doi.org/10.1016/j.jweia.2018.12.019.
  59. Towne, A., Schmidt, O.T. and Colonius, T. (2018), "Spectral proper orthogonal decomposition and its relationship to dynamic mode decomposition and resolvent analysis", J. Fluid Mech., 847, 821-867. https://doi.org/10.1017/jfm.2018.283.
  60. Verma, S.K., Kamal, K. and Harjeet, K. (2014), "Estimation of Coefficient of Pressure in High Rise Buildings Using Artificial Neural Network", Int. J. Eng. Res. Appl., 4(4), 105-110.
  61. Vyavahare, A.Y., Godbole, P.N. and Nikose, T. (2012), "Analysis of tall building for across wind response", Int. J. Civil Struct. Eng., 2(3), 679-986.
  62. Xing, F., Mohotti, D. and Chauhan, K. (2018), "Study on localised wind pressure development in gable roof buildings having different roof pitches with experiments, RANS and LES simulation models", Build. Environ., 143, 240-257. https://doi.org/10.1016/j.buildenv.2018.07.026.
  63. Zhang, X., Weerasuriya, A.U., Wang, J., Li, C.Y., Chen, Z., Tse, K. T. and Hang, J. (2022), "Cross-ventilation of a generic building with various configurations of external and internal openings", Build. Environ., 207, 108447. https://doi.org/10.1016/j.buildenv.2021.108447.