Structural Engineering and Mechanics

  • 제82권2호
  • /
  • Pages.259-270
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Reduction of the residual stresses during the additive manufacturing of a thermo-viscoelastic growing cylinder under non-uniform volumetric heating by electric induction

  • Fekry, Montaser (Department of Mechanics and Control Processes, Moscow Institute of Physics and Technology (National Research University))
  • 투고 : 2021.11.08
  • 심사 : 2022.02.03
  • 발행 : 2022.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

The paper investigates the residual stresses arising in a thermoviscoelastic cylinder as a result of layer-by-layer deposition of material on its lateral surface. Internal stresses are caused by incompatible deformations that accumulate in the assembly as a result of joining parts with different temperatures. For the analysis of internal stresses, an analytical solution to the axisymmetric quasi-static problem of thermoelasticity for a growing cylinder is constructed. It is shown that the distribution of residual stresses depends on the scenario of the surfacing process. In this case, the supply of additional heat to the growing body can significantly reduce the unevenness of temperature fields and reduce the intensity of residual stresses. The most effective is uneven heating, which can be realized, by the action of an alternating current with a tunable excitation frequency. The temperature and residual stresses fields on the growing surface is analyzed numerically for Titanium and Copper materials.

키워드

과제정보

The paper's author, Montaser Fekry is funded by a PhD scholarship from the Ministry of Higher Education of the Arab Republic of Egypt and the Russian Government Scholarship with application No: EGY-6154/17.

참고문헌

  1. Alharbi, A.M., Othman, M.I. and Atef, H.M. (2021), "Effect of viscosity and rotation on a generalized twotemperature thermoelasticity under five theories", Struct. Eng. Mech., 78(6), 755-764. https://doi.org/10.12989/sem.2021.78.6.755.
  2. Andrushkiw, R.I. (1995), "On the spectral theory of operator pencils in a Hilbert space", J. Nonlin. Math. Phys., 2(3-4), 356-366. https://doi.org/10.2991/jnmp.1995.2.3-4.15.
  3. Arutyunyan, N.K., Drozdov, A.D. and Naumov, V.E. (1987), "Mechanics of growing viscoelastoplastic bodies", Nauka, Moscow.
  4. Buchbinder, D., Meiners, W., Pirch, N., Wissenbach, K. and Schrage, J. (2014), "Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting", J. Laser Appl., 26(1), 012004. https://doi.org/10.2351/1.4828755.
  5. Ciarletta, P., Destrade, M., Gower, A.L. and Taffetani, M. (2016), "Morphology of residually stressed tubular tissues: Beyond the elastic multiplicative decomposition", J. Mech. Phys. Solid., 90, 242-253. https://doi.org/10.1016/j.jmps.2016.02.020.
  6. DebRoy, T., Wei, H.L., Zuback, J.S., Mukherjee, T., Elmer, J.W., Milewski, J.O., ... & Zhang, W. (2018), "Additive manufacturing of metallic components process, structure and properties", Prog. Mater. Sci., 92, 112-224. https://doi.org/10.1016/j.pmatsci.2017.10.001.
  7. Donachie, M.J. (2000), Titanium: A Technical Guide, ASM International.
  8. Green, A.E. (1962), "Thermoelastic stresses in initially stressed bodies", Proc. Roy. Soc. London. Ser. A. Math. Phys. Sci., 266(1324), 1-9. https://doi.org/10.1098/rspa.1962.0043.
  9. John, F. (1982), Partial Differential Equations, Springer-Verlag, New York.
  10. Johnson, B.E. and Hoger, A. (1995), "The use of a virtual configuration in formulating constitutive equations for residually stressed elastic materials", J. Elast., 41(3), 177-215. https://doi.org/10.1007/BF00041874.
  11. Klarbring, A., Olsson, T. and Stalhand, J. (2007), "Theory of residual stresses with application to an arterial geometry", Arch. Mech., 59(4-5), 341-364.
  12. Kruth, J.P., Deckers, J., Yasa, E. and Wauthl, R. (2012), "Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method", Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf., 226(6), 980-991. https://doi.org/10.1177/0954405412437085.
  13. Kruth, J.P., Leu, M.C. and Nakagawa, T. (1998), "Progress in additive manufacturing and rapid prototyping", CIRP Ann.- Manuf. Technol., 47(2), 525-540. https://doi.org/10.1016/S0007-8506(07)63240-5.
  14. Levitin, A.L., Lychev, S.A. and Saifutdinov, I.N. (2014), "Transient dynamical problem for a accreted thermoelastic parallelepiped", Proceedings of the World Congress on Engineering, 2, London, July.
  15. Levitin, A.L., Lychev, S.A., Manzhirov, A.V. and Shatalov, M.Y. (2012), "Nonstationary vibrations of a discretely accreted thermoelastic parallelepiped", Mech. Solid., 47(6), 677-689. https://doi.org/10.3103/S0025654412060106.
  16. Levy, G.N., Schindel, R. and Kruth, J.P. (2003), "Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives", CIRP Ann., 52(2), 589-609. https://doi.org/10.1016/S0007-8506(07)60206-6.
  17. Lorrain, P. and Corson, D.R. (1970), Electromagnetic Fields and Waves.
  18. Lychev, S.A. (2008), "Coupled dynamic thermoviscoelasticity problem", Mech. Solid., 43(5), 769-784. https://doi.org/10.3103/S0025654408050129.
  19. Lychev, S.A. (2011), "Universal deformations of growing solids", Mech. Solid., 46(6), 863-876. https://doi.org/10.3103/S0025654411060069.
  20. Lychev, S.A. (2017), "Geometric aspects of the theory of incompatible deformations in growing solids", Mech. Mater. Technol., 327-347. https://doi.org/10.1007/978-3-319-56050-2_19.
  21. Lychev, S.A. and Fekry, M. (2021), "Residual stresses in a thermoelastic cylinder resulting from layer-by-layer surfacing", Vestnik Samarskogo Universiteta. Estestvenno-Nauchnaya Seriya, 26(3), 63-90.
  22. Lychev, S.A. and Koifman, K. (2018), Geometry of Incompatible Deformations: Differential Geometry in Continuum Mechanics, De Gruyter.
  23. Lychev, S.A. and Manzhirov, A.V. (2013), "Reference configurations of growing bodies", Mech. Solid., 48(5), 553-560. https://doi.org/10.3103/S0025654413050117.
  24. Lychev, S.A. and Manzhirov, A.V. (2014), "Discrete and continuous growth of hollow cylinder. Finite deformations", Proceedings of the World Congress on Engineering, 2, London, July.
  25. Lychev, S.A., Kostin, G.V., Koifman, K.G. and Lycheva, T.N. (2018), "Modeling and optimization of layer-by-layer structures", J. Phys.: Conf. Ser., 1009(1), 012014-50. https://doi.org/10.1088/1742-6596/1009/1/012014
  26. Lychev, S.A., Manzhirov, A., Shatalov, M. and Fedotov, I. (2017), "Transient temperature fields in growing bodies subject to discrete and continuous growth regimes", Procedia IUTAM, 23, 120-129. https://doi.org/10.1016/j.piutam.2017.06.012.
  27. Lychev, S.A., Manzhirov, A.V. and Joubert, S.V. (2010), "Closed solutions of boundary-value problems of coupled thermoelasticity", Mech. Solid., 45(4), 610-623. https://doi.org/10.3103/S0025654410040102.
  28. Meiners, W., Wissenbach, K. and Gasser, A. (1998), "Shaped body especially prototype or replacement part production", DE Patent, 19.
  29. Mercelis, P. and Kruth, J.P. (2006), "Residual stresses in selective laser sintering and selective laser melting", Rapid Prototyp. J., 12(5), 254-265. https://doi.org/10.1108/13552540610707013.
  30. Othman, M.I.A. and Fekry, M. (2017), "The effect of initial stress on generalized thermoviscoelastic medium with voids and temperature dependent properties under Green Neghdi Theory", Mech. Mech. Eng., 21(2), 291-308.
  31. Othman, M.I.A., Fekry, M. and Marin, M. (2020), "Plane waves in generalized magneto-thermo-viscoelastic medium with voids under the effect of initial stress and laser pulse heating", Struct. Eng. Mech., 73(6), 621-629. https://doi.org/10.12989/sem.2020.73.6.621.
  32. Ozakin, A. and Yavari, A. (2010), "A geometric theory of thermal stresses", J. Math. Phys., 51(3), 032902. https://doi.org/10.1063/1.3313537.
  33. Polyanin, A.D. and Lychev, S.A. (2016), "Decomposition methods for coupled 3D equations of applied mathematics and continuum mechanics: Partial survey, classification, new results, and generalizations", Appl. Math. Model., 40(4), 3298-3324. https://doi.org/10.1016/j.apm.2015.10.016.
  34. Sadik, S. and Yavari, A. (2017), "Geometric nonlinear thermoelasticity and the time evolution of thermal stresses", Math. Mech. Solid., 22(7), 1546-1587. https://doi.org/10.1177/1081286515599458.
  35. Vilaro, T., Colin, C. and Bartout, J.D. (2011), "As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting", Metal. Mater. Transac. A, 42(10), 3190-3199. https://doi.org/10.1007/s11661-011-0731-y.
  36. Wang, J. and Slattery, S.P. (2002), "Thermoelasticity without energy dissipation for initially stressed bodies", Int. J. Math. Math. Sci., 31(6), 329-337. https://doi.org/10.1155/S0161171202105023.
  37. Weeks, W.L. (1981), Transmission and Distribution of Electrical Energy, Harpercollins.
  38. Yavari, A. (2010), "A geometric theory of growth mechanics", J. Nonlin. Sci., 20(6), 781-830. https://doi.org/10.1007/s00332-010-9073-y.
  39. Zaeh, M.F. and Branner, G. (2010), "Investigations on residual stresses and deformations in selective laser melting", Prod. Eng., 4(1), 35-45. https://doi.org/10.1007/s11740-009-0192-y