Advances in concrete construction

  • 제13권4호
  • /
  • Pages.339-347
  • /
  • 2022
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental and numerical investigation on RC moment-Resisting frames retrofitted with NSD yielding dampers

  • Esfandiari, J. (Department of Civil Engineering, Kermanshah Branch, Islamic Azad University) ;
  • Zangeneh, E. (Department of Civil Engineering, Kermanshah Branch, Islamic Azad University) ;
  • Esfandiari, S. (Departments of Civil Engineering, RWTH Aachen University)
  • 투고 : 2021.05.25
  • 심사 : 2022.04.17
  • 발행 : 2022.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Retrofitting in reinforced concrete structures has been one of the most important research topics in recent years. There are several methods for retrofitting RC moment-resisting frames. the most important of which is the use of steel bracing systems with yielding dampers. With a proper design of yielding dampers, the stiffness of RC frame systems can be increased to the required extent so that the ductility of the structure is not significantly reduced. In the present study, two experimental samples of a one-third scale RC moment-resisting frame were loaded in the laboratory. In these experiments, the retrofitting effect of RC frames was investigated using Non-uniform Slit Dampers (NSDs). Based on the experimental results of the samples, seismic parameters, i.e., stiffness, ductility, ultimate strength, strength reduction coefficient, and energy dissipation capacity, were compared. The results demonstrated that the retrofitted frame had very significant growth in terms of stiffness, ultimate strength, and energy dissipation capacity. Although the strength reduction factor and ductility decreased in the retrofitted sample. In general, the behavior of the frame with NSDs was evaluated better than the bare frame.

키워드

참고문헌

  1. ACI 374 Committee, 374.1-05 (2006), "Acceptance criteria for moment frames based on structural testing and commentary", American Concrete Institute, Farmington Hills, Mich.
  2. Badoux, M. and Jirsa, J. (1990), "Steel bracing of RC frames for seismic retrofitting", J. Struct. Eng., 116(1), 55-74. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:1(55)
  3. Benavent-Climent, A., Morillas, L. and Escolano-Margarit, D. (2014), "Seismic performance and damage evaluation of a reinforced concrete frame with hysteretic dampers through shake-table tests", Earthq. Eng. Struct. Dyn., 43(15), 2399-2417. https://doi.org/10.1002/eqe.2459.
  4. Castaldo, P., Palazzo, B. and Perri, F. (2016), "Fem simulations of a new hysteretic damper: The dissipative column", Ingegneria Sismica, 33(1), 34-45.
  5. Castaldo, P., Tubaldi, E., Selvi, F. and Gioiella, L. (2021), "Seismic performance of an existing RC structure retrofitted with buckling restrained braces", J. Build. Eng., 33, 101688. https://doi.org/10.1016/j.jobe.2020.101688.
  6. Chaudhury, D. and Singh, Y. (2014), "Performance-based design of RC frame buildings with metallic and friction dampers", J. Inst. Eng. Series A, 95(4), 239-247. https://doi.org/10.1007/s40030-014-0089-4.
  7. Deringol, A.H. and Guneyisi, E.M. (2020), "Single and combined use of friction-damped and base-isolated systems in ordinary buildings", J. Constr. Steel Res., 174, 106308. https://doi.org/10.1007/s40030-014-0089-4.
  8. Di Sarno, L. and Manfredi, G. (2010), "Seismic retrofitting of existing RC frames with buckling restrained braces", Improving the Seismic Performance of Existing Buildings and Other Structures, 741-752.
  9. Esfandiari, J. and Latifi, M.K. (2019), "Numerical study of progressive collapse in reinforced concrete frames with FRP under column removal", Adv. Concrete Constr., 8(3), 165-172. http://doi.org/10.12989/acc.2019.8.3.165.
  10. Esfandiari, J. and Soleimani, E. (2018), "Laboratory investigation on the buckling restrained braces with an optimal percentage of microstructure, polypropylene and hybrid fibers under cyclic loads", Compos. Struct., 203, 585-598. https://doi.org/10.1016/j.compstruct.2018.07.035.
  11. Esfandiari, S. and Esfandiari, J. (2016), "Simulation of the behaviour of RC columns strengthen with CFRP under rapid loading", Adv. Concrete Constr., 4(4), 319. http://doi.org/10.12989/acc.2017.4.4.319.
  12. FEMA-440. (2005), Improvement of Nonlinear Static Seismic Procedures. Federal Emergency Management Agency, FEMA, Washington, USA.
  13. Georgiadi-Stefanidi, K., Mistakidis, E. and Stylianidis, K.A. (2013), "Simulation of experiments on RC frames strengthened with dissipative steel links", Adv. Concrete Constr., 1(3), 253. http://doi.org/10.12989/acc2013.1.3.253.
  14. Hejazi, F., Shoaei, M.D., Jaafar, M.S. and Rashid, R.S.B.M. (2015), "Effect of viscous dampers on yielding mechanisms of RC structures during earthquake", Earthq. Struct., 8(6), 1499-1528. http://doi.org/10.12989/eas.2015.8.6.1499.
  15. Javidan, M.M. and Kim, J. (2019), "Seismic retrofit of soft-first-story structures using rotational friction dampers", J. Struct. Eng., 145(12), 04019162. https://doi.org/10.1061/(asce)st.1943-541x.0002433
  16. Keykhosravi, A. and Aghayari, R. (2017), "Evaluating response modification factor (R) of reinforced concrete frames with chevron brace equipped with steel slit damper", KSCE J. Civil Eng., 21(4), 1417-1423. https://doi.org/10.1007/s12205-016-1055-7.
  17. Kim, J. and Shin, H. (2017), "Seismic loss assessment of a structure retrofitted with slit-friction hybrid dampers", Eng. Struct., 130, 336-350. https://doi.org/10.1016/j.engstruct.2016.10.052.
  18. Kiris, S.S. and Boduroglu, M.H. (2013), "Earthquake parameters affecting the performance of an RC frame with friction damper", Soil Dyn. Earthq. Eng., 55, 148-160. https://doi.org/10.1016/J.SOILDYN.2013.09.007.
  19. Landi, L., Vorabbi, C. Fabbri, O. and Diotallevi, P.P. (2017), "Simplified probabilistic seismic assessment of RC frames with added viscous dampers", Soil Dyn. Earthq. Eng., 97, 277-288. https://doi.org/10.1016/j.soildyn.2017.03.003.
  20. Lee, J.H., Jung, C.Y., Woo, T.R. and Cheung, J.H. (2019), "Post-yielding tension stiffening of reinforced concrete members using an image analysis method with a consideration of steel ratios", Adv. Concrete Constr., 7(2), 117. http://doi.org/10.12989/acc.2019.7.2.117.
  21. Lobo, P.S., Almeida, J. and Guerreiro, L. (2017), "Recentring and control of peak displacements of a RC frame using damping devices", Soil Dyn. Earthq. Eng., 94, 66-74. https://doi.org/10.1016/j.soildyn.2017.01.003.
  22. Nabid, N., Hajirasouliha, I., Margarit, D. and Petkovski, M. (2020), "Optimum energy based seismic design of friction dampers in RC structures", Struct., 27, 2550-2562. https://doi.org/10.1016/j.istruc.2020.08.052.
  23. Oinam, R.M. and Sahoo, D.R. (2015), "Enhancement of lateral capacity of damaged non-ductile RC frame using combined-yielding metallic damper", Adv. Struct. Eng., 2157-2167. https://doi.org/10.1007/978-81-322-2187-6_165.
  24. Palazzo, B., Castaldo, P. and Marino, I. (2015), "The dissipative column: A new hysteretic damper", Build., 5(1), 163-178. https://doi.org/10.3390/buildings5010163.
  25. Pallares, F.J., Dominguez, D. and Pallares, L. (2020), "Resilient structures in the seismic retrofitting of RC frames: A case study", Struct. Eng. Mech., 76(1), 57-65. https://doi.org/10.12989/sem.2020.76.1.057.
  26. Pan, P., Cao, Y., Wang, H. and Sun, J. (2020), "Development of double-stage yielding coupling beam damper", J. Constr. Steel Res., 172, 106147. https://doi.org/10.1016/j.jcsr.2020.106147.
  27. Pan, Y., An, R., Bai, J., Yan, X. and Jin, S. (2019), "Seismic design and performance analysis of buckling-restrained braced RC frame structures", Struct. Des. Tall Spec. Build., 28(15), e1661. https://doi.org/10.1002/tal.1661.
  28. Patil, S. and Agarwal, P. (2018), "Low-damage seismic design of RC buildings with supplemental energy dissipation systems", Urbanization Challenges in Emerging Economies: Resilience and Sustainability of Infrastructure, 391-402.
  29. Shen, H., Zhang, R., Weng, D., Gao, C., Luo, H. and Pan, C. (2017), "Simple design method of structure with metallic yielding dampers based on elastic-plastic response reduction curve", Eng. Struct., 150, 98-114. https://doi.org/10.1016/j.engstruct.2017.07.047.
  30. Srechai, J., Leelataviwat, S., Wongkaew, A. and Lukkunaprasit, P. (2017), "Experimental and analytical evaluation of a low-cost seismic retrofitting method for masonry-infilled non-ductile RC frames", Earthq. Struct., 12(6), 699-712. https://doi.org/10.12989/eas.2017.12.6.699.
  31. Sutcu, F., Toru, T. and Ryota, M. (2014), "Seismic retrofit design method for RC buildings using buckling-restrained braces and steel frames", J. Constr. Steel Res., 101, 304-313. https://doi.org/10.1016/j.jcsr.2014.05.023.
  32. TahamouliRoudsari, M. Cheraghi, K. and Habibi, M.R. (2019), "Investigation of retrofitting RC moment resisting frames with ADAS yielding dampers", Asian J. Civil Eng., 20(1), 125-133. https://doi.org/10.1007/s42107-018-0092-6.
  33. TahamouliRoudsari, M., Entezari, A., Hadidi, M. and Gandomian, O. (2017), "Experimental assessment of retrofitted RC frames with different steel braces", Struct., 11, 206-217. https://doi.org/10.1016/j.istruc.2017.06.003.
  34. TahamouliRoudsari, M., Eslamimanesh, M.B. Entezari, A.R., Noori, O. and Torkaman, M. (2018), "Experimental assessment of retrofitting RC moment resisting frames with ADAS and TADAS yielding dampers", Struct., 14, 75-87. https://doi.org/10.1016/j.istruc.2018.02.005.
  35. Vafaei, M., Mursal, A., Sheikh, O. and. Alih, S.O. (2019), "Experimental study on the efficiency of tapered strip dampers for the seismic retrofitting of damaged non-ductile RC frames", Eng. Struct., 199, 109601. https://doi.org/10.1016/j.engstruct.2019.109601.
  36. Xie, L., Zhang, L., Pan, C., Zhang, R. and Chen, T. (2020), "Uniform damping ratio-based design method for seismic retrofitting of elastoplastic RC structures using viscoelastic dampers", Soil Dyn. Earthq. Eng., 128, 105866. https://doi.org/10.1016/j.soildyn.2019.105866.