Advances in concrete construction

  • 제13권4호
  • /
  • Pages.291-305
  • /
  • 2022
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Structural performance of concrete containing fly ash based lightweight angular aggregates

  • Pati, Pritam K. (Department of Civil Engineering, National Institute of Technology) ;
  • Sahu, Shishir K. (Department of Civil Engineering, National Institute of Technology)
  • 투고 : 2020.05.07
  • 심사 : 2022.04.06
  • 발행 : 2022.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

The present investigation deals with the production of the innovative lightweight fly ash angular aggregates (FAA) first time in India using local class 'F' fly ash, its characterization, and exploring the potential for its utilization as alternative coarse aggregates in structural concrete applications. Two types of aggregates are manufactured using two different kinds of binders. The manufacturing process involves mixing fly ash, binder, and water, followed by the briquetting process, sintering and crushing them into suitable size aggregates. Tests are conducted on fly ash angular aggregates to measure their physical properties such as crushing value, impact value, specific gravity, water absorption, bulk density, and percentage of voids. Study shows that the physical parameters are significantly enhanced as compared to commercially available fly ash pellets (FAP). The developed FAA are used in concrete vis-à-vis conventional granite aggregates and FAP to determine their compressive, split tensile and flexural strengths. Although being lightweight, the strength parameters for concrete containing FAA are well compared with conventional concrete. This might be due to the high pozzolanic reaction between fly ash angular aggregates and cement paste. Also, RCC beams are cast and the load-deflection behaviour and ultimate load carrying capacity signify that FAA can be suitably used for RCC construction. Hence, the utilization of fly ash as angular aggregates can reduce the dead load of the structure and at the same time serves as a solution for fly ash disposal and mineral depletion problem.

키워드

과제정보

The funding through sanction order of Works Department, Government of Odisha, Bhubaneswar, India vide letter no. 6890 dated 22nd Feb. 2015 and No Lab-E-451/2015 WE Dated. 12th June 2015 is hereby acknowledged.

참고문헌

  1. Adhikary, S.K., Ashish, D.K. and Rudzionis, Z. (2021), "Aerogel based thermal insulating cementitious composites: A review", Ener. Build., 245, 111058. https://doi.org/10.1016/j.enbuild.2021.111058.
  2. Adhikary, S.K., Ashish, D.K. and Rudzionis, Z. (2021a), "Expanded glass as light-weight aggregate in concrete-A review", J. Clean. Prod., 313, 127848. https://doi.org/10.1016/j.jclepro.2021.127848.
  3. Adhikary, S.K., Rudzionis, Z., Tuckute, S. and Ashish, D.K. (2021b), "Effects of carbon nanotubes on expanded glass and silica aerogel based lightweight concrete", Nat. Sci. Rep., 11(1), 1-11. https://www.nature.com/articles/s41598-021-81665-y. https://doi.org/10.1038/s41598-020-79139-8
  4. Arowojolu, O., Fina, J., Pruneda, A., Ibrahim, A. and Mahmoud, E. (2019), "Feasibility study on concrete performance made by partial replacement of cement with nanoglass powder and fly ash", Int. J. Civil Eng., 17(7), 1007-1014. https://doi.org/10.1007/s40999-018-0352-6.
  5. Ashish, D.K., Verma, S.K., Singh, J. and Sharma, N. (2018), "Strength and durability characteristics of bricks made using coal bottom and coal fly ash", Adv. Concrete Constr., 6(4), 407-422. https://doi.org/10.12989/acc.2018.6.4.407.
  6. Bentz, D.P. and Garboczi, E.J. (1991), "Simulation studies of the effects of mineral admixtures on the cement paste-aggregate interfacial zone", ACI Mater. J., 88, 518-529.
  7. Bijen, J.M.J.M. (1986), "Manufacturing processes of artificial lightweight aggregates from fly ash", Int. J. Cement Compos. Light. Concrete, 8(3), 191-199. https://doi.org/10.1016/0262-5075(86)90040-0.
  8. Celikten, S. (2022), "Properties of recycled steel fibre reinforced expanded perlite based geopolymer mortars", Adv. Concrete Constr., 13(1), 25-34. https://doi.org/10.12989/acc.2022.13.1.025
  9. Cerny, V., Kocianova, M. and Drochytka, R. (2017), "Possibilities of lightweight high strength concrete production from sintered fly ash aggregate", Proc. Eng., 195, 9-16. https://doi.org/10.1016/j.proeng.2017.04.517.
  10. Degirmenci, F.N. (2018), "Utilization of natural and waste pozzolans as an alternative resource of geopolymer mortar", Int. J. Civil Eng., 16(2), 179-188. https://doi.org/10.1007/s40999-016-0115-1
  11. Gomathi, P. and Sivakumar, A. (2015), "Accelerated curing effects on the mechanical performance of cold bonded and sintered fly ash aggregate concrete", Constr. Build. Mater., 77, 276-287. https://doi.org/10.1016/j.conbuildmat.2014.12.108.
  12. Harikrishnan, K.I. and Ramamurthy, K. (2004), "Study of parameters influencing the properties of sintered fly ash aggregates", Int. J. Solid. Waste Tech. Manag., 30(3), 136-142.
  13. Hu, Y., Hu, S., Yang, B. and Wang, S. (2020), "Effects of subsequent curing on chloride resistance and microstructure of steam-cured mortar", Adv. Concr. Constr., 9(5), 449-457. https://doi.org/10.12989/acc.2020.9.5.449.
  14. IS: 10262 (2009), Recommended Guidelines for Concrete Mix Design, Bureau of Indian Standards, New Delhi, India.
  15. IS: 1786 (2008), High Strength Steel Bars and Wires for Concrete Reinforcement-Specification, Bureau of Indian Standards, New Delhi, India.
  16. IS: 2386-Part III (1963), Method of Test for Aggregate for Concrete, Bureau of Indian Standards, New Delhi, India.
  17. IS: 2386-Part IV (1963), Methods of Test for Aggregates for Concrete, Bureau of Indian Standards, New Delhi, India.
  18. IS: 383 (1970), Specifications for coarse and fine aggregates from natural sources for concrete, Bureau of Indian Standards, New Delhi, India.
  19. IS: 456 (2000), Indian Standard Plain and Reinforced Concrete Code of Practice, Bureau of Indian Standards, New Delhi, India.
  20. IS: 516 (2004). Methods of Test for Strength of Concrete, Bureau of Indian Standards, New Delhi, India.
  21. IS: 5816 (1999), Splitting Tensile Strength of Concrete-Methods of Test, Bureau of Indian Standards, New Delhi, India.
  22. IS: 8112 (2013), Ordinary Portland Cement 43 grade-Specification, Bureau of Indian Standards, New Delhi, India.
  23. IS: 9103 (1999), Concrete Admixtures-Specification, Bureau of Indian Standards, New Delhi, India.
  24. Jagadeesan, K., Umarani, C., Jayanthi, S., Sundararajan, R. and Shanmugasundaram, S. (2014), "Study on Utilization of Fly Ash Aggregates in Concrete", Modern Appl. Sci., 4(5), 44-57. https://doi.org/10.5539/mas.v4n5p44.
  25. Jena, T. and Panda K.C. (2018), "Mechanical and durability properties of marine concrete using fly ash and silpozz", Adv. Concrete Constr., 6(1), 47-68. https://doi.org/10.12989/acc.2018.6.1.047.
  26. Joseph, G. and Ramamurthy, K. (2009), "Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete", Constr. Build. Mater., 23(5), 1862-1870. https://doi.org/10.1016/j.conbuildmat.2008.09.018
  27. Kayali, O. (2008), "Fly ash lightweight aggregates in high performance concrete", Constr. Build. Mater., 22(12), 2393-2399. https://doi.org/10.1016/j.conbuildmat.2007.09.001.
  28. Kockal, N.U. and Ozturan, T. (2010), "Effects of lightweight fly ash aggregate properties on the behavior of lightweight concretes", J. Hazard. Mater., 179, 954-965. https://doi.org/10.1016/j.jhazmat.2010.03.098.
  29. Kockal, N.U. and Ozturan, T. (2011a), "Characteristics of lightweight fly ash aggregates produced with different binders and heat treatments", Cement Concrete Compos., 33(1), 61-67. https://doi.org/10.1016/j.cemconcomp.2010.09.007.
  30. Kockal, N.U. and Ozturan, T. (2011b), "Optimization of properties of fly ash aggregates for high-strength lightweight concrete production", Mater. Des., 32(6), 3586-3593. https://doi.org/10.1016/j.matdes.2011.02.028.
  31. Kockal, N.U. and Ozturan, T. (2011c), "Durability of lightweight concretes with lightweight fly ash aggregates", Constr. Build. Mater., 25(3), 1430-1438. https://doi.org/10.1016/j.conbuildmat.2010.09.022.
  32. Kumar, V.P. and Prasad, D.R. (2019), "Influence of supplementary cementitious materials on strength and durability characteristics of concrete", Adv. Concrete Constr., 7(2), 75-85 https://doi.org/10.12989/acc.2019.7.2.075.
  33. Kurbetci, S., Nas, M. and Sahin, M. (2022), "Durability properties of mortars with fly ash containing recycled aggregates", Adv. Concrete Constr., 13(1), 101-111. https://doi.org/10.12989/acc.2022.13.1.101.
  34. Kurtoglu, A.E., Alzeebaree, R., Aljumaili, O., Nis, A., Gulsan, M.E., Humur, G. and Cevik, A. (2018), "Mechanical and durability properties of fly ash and slag based geopolymer concrete", Adv. Concrete Constr., 6(4), 345-362. https://doi.org/10.12989/acc.2018.6.4.345.
  35. Manikandan, R. and Ramamurthy, K. (2008), "Effect of curing method on characteristics of cold bonded fly ash aggregates", Cement Concrete Compos., 30(9), 848-853. https://doi.org/10.1016/j.cemconcomp.2008.06.006.
  36. Nadesan, M.S. and Dinakar, P. (2017), "Mix design and properties of fly ash waste lightweight aggregates in structural lightweight concrete", Case Stud. Constr. Mater., 7, 336-347. https://doi.org/10.1016/j.cscm.2017.09.005.
  37. Parveen and Singhal, D. (2017), "Development of mix design method for geopolymer concrete", Adv. Concrete Constr., 5(4), 377-390. https://doi.org/10.12989/acc.2017.5.4.377.
  38. Patil, A.A., Chore, H.S. and Dode, P.A. (2014), "Effect of curing condition on strength of geopolymer concrete", Adv. Concrete Constr., 2(1), 29-37. http://doi.org/10.12989/acc.2014.2.1.029.
  39. Ramamurthy, K. and Harikrishnan, K.I. (2006), "Influence of binders on properties of sintered fly ash aggregate", Cement Concrete Compos., 28(1), 33-38. https://doi.org/10.1016/j.cemconcomp.2005.06.005.
  40. Ramme, B.B.W., Nechvatal, T., Tarun, R. and Kolbeck, H.J. (1995), Center for By-Products Utilization.
  41. Rudzionis, Z., Adhikary, S.K., Manhanga, F.C., Ashish, D.K., Ivanauskas, R., Stelmokaitis, G. and Navickas, A.A. (2021), "Natural zeolite powder in cementitious composites and its application as heavy metal absorbents", J. Build. Eng., 43, 103085. https://doi.org/10.1016/j.jobe.2021.103085.
  42. Shaikh, F., Kerai, S. and Kerai, S. (2015), "Effect of micro-silica on mechanical and durability properties of high volume fly ash recycled aggregate concretes (HVFA-RAC)", Adv. Concrete Constr., 3(4), 317-331. http://doi.org/10.12989/acc.2015.3.4.317.
  43. Shariq, M., Pal, S., Chaubey, R. and Masood, A. (2022), "An experimental and analytical study into the strength of hooked-end steel fiber reinforced HVFA concrete", Adv. Concrete Constr., 13(1), 35-43. https://doi.org/10.12989/acc.2022.13.1.035.
  44. Sharma, R. and Bansal, P.P. (2019), "Efficacy of supplementary cementitious material and hybrid fiber to develop the ultra high performance hybrid fiber reinforced concrete", Adv. Concrete Constr., 8(1), 21-31. https://doi.org/10.12989/acc.2019.8.1.021.
  45. Shivaprasad, K.N. and Das, B.B. (2018), "Determination of optimized geopolymerization factors on the properties of pelletized fly ash aggregates", Constr. Build. Mater., 163, 428-437. https://doi.org/10.1016/j.conbuildmat.2017.12.038.
  46. Sivakumar, A. and Gomathi, P. (2012), "Pelletized fly ash lightweight aggregate concrete: A promising material", J. Civil Eng. Constr. Tech., 3(2), 42-48. https://doi.org/10.5897/jbd11.088.
  47. Sunil, B.M., Manjunatha, L.S., Ravi, L. and Yaragal, S.C. (2015), "Potential use of mine tailings and fly ash in concrete", Adv. Concrete Constr., 3(1), 055-069. http://doi.org/10.12989/acc.2015.3.1.055.
  48. Thomas, J. and Harilal, B. (2014), "Fresh and hardened properties of concrete containing cold bonded aggregates", Adv. Concrete Constr., 2(2), 77-89. http://doi.org/10.12989/acc.2014.2.2.077.
  49. Vali, K.S. and Murugan, S.B. (2020), "Effect of different binders on cold-bonded artificial lightweight aggregate properties", Adv. Concrete Constr., 9(2), 183-193. https://doi.org/10.12989/acc.2020.9.2.183
  50. Verma, C.L., Handa, S.K., Jain, S.K. and Yadav, R.K. (1998), "Techno-commercial perspective study for sintered fly ash light-weight aggregates in India", Constr. Build. Mater., 12, 341-346. https://doi.org/10.1016/S0950-0618(98)00022-1.
  51. Verma, S.K., Ashish, D.K. and Singh, J. (2016), "Performance of bricks and brick masonry prism made using coal fly ash and coal bottom ash", Adv. Concrete Constr., 4(4), 231-242. https://doi.org/10.12989/acc.2016.4.4.231.
  52. Wasserman, R. and Bentur, A. (1996), "Interfacial interactions in lightweight aggregate concretes and their influence on the concrete strength", Cement Concrete Compos., 18(1), 67-76. https://doi.org/10.1016/0958-9465(96)00002-9.
  53. Wongsa, A., Zaetang, Y., Sata, V. and Chindaprasirt, P. (2016), "Properties of lightweight fly ash geopolymer concrete containing bottom ash as aggregates", Constr. Build. Mater., 111, 637-643. https://doi.org/10.1016/j.conbuildmat.2016.02.135.
  54. Wu, C.H., Chen, C.J., Lin, Y.F. and Lin, S.K. (2021), "Improvement of bond strength and durability of concrete incorporating high volumes of class F fly ash", Adv. Concrete Constr., 12(5), 367-375. https://doi.org/10.12989/acc.2021.12.6.367.
  55. Xu, G. and Shi, X., 2018, "Characteristics and applications of fly ash as a sustainable construction material: A state-of-the-art review", Res. Conserv. Recycl., 136, 95-109. https://doi.org/10.1016/j.resconrec.2018.04.010.
  56. Zafar, I., Tahir, M.A., Hameed, R., Rashid, K. and Ju, M. (2022), "Reactivity of aluminosilicate materials and synthesis of geopolymer mortar under ambient and hot curing condition", Adv. Concrete Constr., 13(1), 71-81. https://doi.org/10.12989/acc.2022.13.1.071.