Journal of the Architectural Institute of Korea (대한건축학회논문집)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Application of 3D Laser Scanning Technology to the Measurement of Construction Precision in Building Structural Frame Construction

건물 골조공사 시공정밀도 측정에 3D 레이저 스캐닝 기술 적용 사례연구

  • Kim, Ju-Yong (Dept. of Architectural Engineering, Kyonggi University,) ;
  • Kim, Gwang-Hee (Dept. of Architectural Engineering, Kyonggi University,)
  • Received : 2022.02.04
  • Accepted : 2022.03.25
  • Published : 2022.04.30
⟨ Previous Next ⟩

Abstract

As the era of the 4th industrial revolution begin, the introduction of smart construction technology in the construction industry is in actively. Among the various 4th industrial revolution technologies, in this study, the 3D laser scanning technology was applied to the structural frame construction to confirm the possibility by analyzing the cases to check the quality, etc. As a result, it was possible to check the spacing of wall rebar, the verticality and thickness of the concrete wall, and the horizontality and thickness of the concrete slab during frame construction. Therefore, when 3D laser scanning is applied to the structural frame work during the construction work, it will be possible to check the condition more quickly and with less manpower, thereby contributing to the improvement of the productivity and quality of the construction work.

Keywords

Acknowledgement

본 연구는 2021학년도 경기대학교 학술연구비(일반연구과제) 지원에 의해 수행되었음.

References

  1. Arayici, Y. (2007). An approach for real world data modelling with the 3D terrestrial laser scanner for built environment. Automation in construction, 16(6), 816-829. https://doi.org/10.1016/j.autcon.2007.02.008
  2. Barbosa, F., Woetzel, J., & Mischke, J. (2017). Reinventing Construction: A Route of Higher Productivity. McKinsey Global Institute,1-20.
  3. Bernat, M., Janowski, A., Rzepa, S., Sobieraj, A., & Szulwic, J. (2014). Studies on the use of terrestrial laser scanning in the maintenance of buildings belonging to the cultural heritage. 14th Geoconference on Informatics, Geoinformatics and Remote Sensing, SGEM. ORG, Albena, Bulgaria, 3, 307-318.
  4. Chin, G.H. (2019). Smart construction technology to innovate construction productivity and enhance safety, Construction Technology Ssangyong, 76, 9-15.
  5. Choi, S.I., Lee, S.W., Son, T.H., & Huh, Y.K. (2020). Future and Demand for the Construction Industry in 2030, Construction & Economy Research Institute of Korea, 25-46.
  6. Construction 21 Steering Committee. (1999). Construction 21, Singapore:Minstry of Manpower and Ministry of National Development, 1-105.
  7. DeWit, A. (2015). Komatsu, smart construction, creative destruction, and Japan's robot revolution. The Asia-Pacific Journal, 13(5), 27-33.
  8. Gikas, V. (2012). Three-dimensional laser scanning for geometry documentation and construction management of highway tunnels during excavation. Sensors, 12(8), 11249-11270. https://doi.org/10.3390/s120811249
  9. HM Government. (2013). Industrial Strategy : Government and Industry in Partnership, London : HM Government, 1-78.
  10. Jongenelen, A. P. P. (2011). Development of a compact, configurable, real-time range imaging system.
  11. Kim J.Y. (2022). Case study applying 3D laser scanning technology to quality inspection of structural frame Suwon, Korea.
  12. Kim T.H., Woo U.T., & Chung G.R. (2019). 3D Scanning Technology for Smart Maintenance of High-rise Buildings, Korea Concrete Institute, 31(6), 39-45.
  13. Kim, M.K., Thedja, J.P.P., & Wang, Q. (2020). Automated dimensional quality assessment for formwork and rebar of reinforced concrete components using 3D point cloud data. Automation in Construction, 112, 103077. https://doi.org/10.1016/j.autcon.2020.103077
  14. Kim, M.K., Thedja, J.P.P., Chi, H.L., & Lee, D.E. (2021). Automated rebar diameter classification using point cloud data based machine learning. Automation in Construction, 122, 103476. https://doi.org/10.1016/j.autcon.2020.103476
  15. Kwon, S.O. (2009). Application of Shape Information Acquisition Technology using Laser Scanning Technology and BIM Technology to the Construction Industry, 建築, 52(4), 31-38.
  16. Lee, G.P., Choi, S.Y., Son, T.H., & Choi, S.I. (2019). Current Status of Smart echnology Utilization and Revitalization Plan of Construction Companies in Korea, Construction & Economy Research Institute of Korea, 1-101.
  17. Li, F., Kim, M. K., & Lee, D. E. (2021). Geometrical model based scan planning approach for the classification of rebar diameters, Automation in Construction, 130, 103848. https://doi.org/10.1016/j.autcon.2021.103848
  18. Liu, J., Li, D., Feng, L., Liu, P., & Wu, W. (2019). Towards automatic segmentation and recognition of multiple precast concrete elements in outdoor laser scan data, Remote Sensing, 11(11), 1383. https://doi.org/10.3390/rs11111383
  19. Liu, J., Zhang, Q., Wu, J., & Zhao, Y. (2018). Dimensional accuracy and structural performance assessment of spatial structure components using 3D laser scanning, Automation in Construction, 96, 324-336. https://doi.org/10.1016/j.autcon.2018.09.026
  20. Nayyar, A., & Kumar, A. (Eds.). (2020). A roadmap to industry 4.0: Smart production, sharp business and sustainable development, Springer,1-12.
  21. Park J.W., & Kim S.O. (2018). Productivity Analysis for the 3D Digitization of Earthwork Sites Based on Scanning Conditions, The Korean Society For Railway, 11(1), 1-9.
  22. Park, J.W., Kim, S.C., Lee, S.S., & Song, H.Y. (2009). Suggesting Solutions when Applying Building Information Modeling (BIM) to the Korean Construction Industry through Case Studies, Journal of the Korea Institute of Building Construction, 9(4), 93-103. https://doi.org/10.5345/JKIC.2009.9.4.093
  23. Schwab, K. (2017). The fourth industrial revolution. Currency, 1-192.
  24. Shanbari, H. A., Blinn, N. M., & Issa, R. R. (2016). Laser scanning technology and BIM in construction management education. Journal of Information Technology in Construction (ITcon), 21(14), 204-217.
  25. Son, S.H., Park, J.W., Kang, S.H., Huh, Y.K., & Kim, D.Y. (2020). A Study on the Types and Causes of Defects in Apartment Housing, Journal of the Korea Institute of Building Construction, 20(6), 515-525. https://doi.org/10.5345/JKIBC.2020.20.6.515
  26. Ministry of land, infrastructure and transport. (2018). Roadmap for Smart Construction Technology to Innovate Construction Productivity and Improve Safety, Seoul : Ministry of Land, Infrastructure and Transport, 1-28.
  27. Turkan, Y., Bosche, F., Haas, C. T., & Haas, R. (2012). Automated progress tracking using 4D schedule and 3D sensing technologies, Automation in construction, 22, 414-421. https://doi.org/10.1016/j.autcon.2011.10.003
  28. Wang, Q., Cheng, J. C., & Sohn, H. (2017). Automated estimation of reinforced precast concrete rebar positions using colored laser scan data. Computer-Aided Civil and Infrastructure Engineering, 32(9), 787-802. https://doi.org/10.1111/mice.12293
  29. Xu, J., & Lu, W. (2018). Smart construction from head to toe: a closed-loop lifecycle management system based on IoT. In Construction Research Congress, 157-168.
  30. Yao, A. W. L. (2005). Applications of 3D scanning and reverse engineering techniques for quality control of quick response products. The international journal of advanced manufacturing technology, 26(11-12), 1284-1288. https://doi.org/10.1007/s00170-004-2116-5
  31. Yuan, X., Moreu, F., & Hojati, M. (2021). Cost-Effective Inspection of Rebar Spacing and Clearance Using RGB-D Sensors. Sustainability, 13(22), 12509. https://doi.org/10.3390/su132212509
  32. Yuan, X., Smith, A., Sarlo, R., Lippitt, C. D., & Moreu, F. (2021). Automatic evaluation of rebar spacing using LiDAR data. Automation in Construction, 131, 103890. https://doi.org/10.1016/j.autcon.2021.103890
  33. Zhao, W., Jiang, Y., Liu, Y., & Shu, J. (2022). Automated recognition and measurement based on three-dimensional point clouds to connect precast concrete components. Automation in Construction, 133, 104000. https://doi.org/10.1016/j.autcon.2021.104000