Coupled systems mechanics

  • 제11권2호
  • /
  • Pages.151-166
  • /
  • 2022
  • /
  • 2234-2184(pISSN)
  • /
  • 2234-2192(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analytical and multicoupled methods for optimal steady-state thermoelectric solutions

  • Moreno-Navarro, Pablo (Department of Continuum Mechanics & Theory of Structures, Universitat Politecnica de Valencia) ;
  • Perez-Aparicio, Jose L. (Department of Continuum Mechanics & Theory of Structures, Universitat Politecnica de Valencia) ;
  • Gomez-Hernandez, J.J. (Research Institute of Water and Environmental Engineering, Universitat Politecnica de Valencia)
  • 투고 : 2022.01.03
  • 심사 : 2022.02.10
  • 발행 : 2022.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Peltier cells have low efficiency, but they are becoming attractive alternatives for affordable and environmentally clean cooling. In this line, the current article develops closed-form and semianalytical solutions to improve the temperature distribution of Bi2Te3 thermoelements. From the distribution, the main objective of the current work-the optimal electric intensity to maximize cooling-is inferred. The general one-dimensional differential coupled equation is integrated for linear and quadratic geometry of thermoelements, under temperature constant properties. For a general shape, a piece-wise solution based on heat flux continuity among virtual layers gives accurate analytical solutions. For variable properties, another piece-wise solution is developed but solved iteratively. Taking advantage of the formulae, the optimal intensity is directly derived with a minimal computational cost; its value will be of utility for more advanced designs. Finally, a parametric study including straight, two linear, barrel, hourglass and vase geometries is presented, drawing conclusions on how the shape of the thermoelement affects the coupled phenomena. A specially developed coupled and non-linear finite element research code is run taking into account all the materials of the cell and using symmetries and repetitions. These accurate results are used to validate the analytical ones.

키워드

과제정보

This work was supported by the Generalitat Valenciana research programmes PROMETEO/2020/016: Applications de Topologic Isolators in Spintronics and Thermoelectricity (TOP-TERM) and BEST/2021/079. The support is gratefully acknowledged.

참고문헌

  1. Dongxua, J., Zhongbaob, W., Pouc, J., Mazzonia, S., Rajood, S. and Romagnoli, A. (2019), "Geometry optimization of thermoelectric modules: Simulation and experimental study", Energy Convers. Manage., 195, 236-243. https://doi.org/10.1016/j.enconman.2019.05.003.
  2. Fabian-Mijangos, A., Min, G. and Alvarez-Quintana, J. (2017), "Enhanced performance thermoelectric module having asymmetrical legs", Energy Convers. Manage., 148, 1372-1381. https://doi.org/10.1016/j.enconman.2017.06.087.
  3. Lamba, R., Manikandan, S., Kaushik, S. and Tyagi, S. (2018), "Thermodynamic modelling and performance optimization of trapezoidal thermoelectric cooler using genetic algorithm", Therm. Sci. Eng. Prog., 6, 236-250. https://doi.org/10.1016/j.tsep.2018.04.010.
  4. Lin, S. and Yu, J. (2016), "Optimization of a trapezoid-type two-stage Peltier couples for thermoelectric cooling applications", Int. J. Refriger., 65, 103-110. https://doi.org/10.1016/j.ijrefrig.2015.12.007.
  5. Lv, H., Wang, X.D., Wang, T.H. and Cheng, C.H. (2016), "Improvement of transient supercooling of thermoelectric coolers through variable semiconductor cross-section", Appl. Energy, 164, 501-508. https://doi.org/10.1016/j.apenergy.2015.11.068.
  6. Mallick, M.M., Franke, L., Rosch, A.G. and Lemmer, U. (2020), "Shape-versatile 3d thermoelectric generators by additive manufacturing", ACS Energy Lett., 6(1), 85-91. https://doi.org/10.1021/acsenergylett.0c02159.
  7. Moreno-Navarro, P., Ibrahimbegovic, A. and Perez-Aparicio, J.L. (2018), "Linear elastic mechanical system interacting with coupled thermo-electro-magnetic fields", Couple. Syst. Mech., 7(1), 5-25. https://doi.org/10.12989/csm.2018.7.1.005.
  8. Palma, R., Perez-Aparicio, J.L. and Bravo, R. (2013), "Study of hysteretic photovoltaic behavior using the finite element method, extended thermodynamic and inverse models", Energy Convers. Manage., 65, 557-563. https://doi.org/10.1016/j.enconman.2012.07.009
  9. Palma, R., Perez-Aparicio, J.L. and Taylor, R.L.T. (2012), "Non-linear finite element formulation applied to thermoelectric materials under hyperbolic heat conduction model", Comput. Meth. Appl. Mech. Eng., 213, 93-103. https://doi.org/10.1016/j.cma.2011.11.011.
  10. Perez-Aparicio, J.L., Palma, R. and Moreno-Navarro, P. (2016a), "Elasto-thermoelectric non-linear, fully coupled, and dynamic finite element analysis of pulsed thermoelectrics", Appl. Therm. Eng., 107, 398-409. https://doi.org/10.1016/j.applthermaleng.2016.05.114.
  11. Perez-Aparicio, J.L., Palma, R. and Taylor, R.L.T. (2012), "Finite element analysis and material sensitivity of Peltier thermoelectric cells coolers", Int. J. Heat Mass Transf., 55, 1363-1374. https://doi.org/10.1016/j.ijheatmasstransfer.2011.08.031.
  12. Perez-Aparicio, J.L., Palma, R. and Taylor, R.L.T. (2016b), "Multiphysics and thermodynamic formulations for equilibrium and non-equilibrium interactions: Non-linear finite elements applied to multi-coupled active materials", Arch. Comput. Meth. Eng., 23(3), 535-583. https://doi.org/10.1007/s11831-015-9149-9.
  13. Rowe, D.M. (2018), CRC Handbook of Thermoelectrics, CRC Press.
  14. Sahin, A.Z. and Yilbas, B.S. (2013), "The thermoelement as thermoelectric power generator: effect of leg geometry on the efficiency and power generation", Energy Convers. Manage., 65, 26-32. https://doi.org/10.1016/j.enconman.2012.07.020.
  15. Siddique, A., Venkateshwar, K., Mahmud, S. and Heyst, B.V. (2020), "Performance analysis of bismuthantimony-telluride-selenium alloy-based trapezoidal-shaped thermoelectric pallet for a cooling application", Energy Convers. Manage., 222, 113245. https://doi.org/10.1016/j.enconman.2020.113245.
  16. Taylor, R.L.T. (2010), FEAP a Finite Element Analysis Program: User Manual, University of California, Berkeley. http://www.ce.berkeley.edu/feap.
  17. Wang, P., Wang, B., Wang, K., Gao, R. and Xi, L. (2021), "An analytical model for performance prediction and optimization of thermoelectric generators with varied leg cross-sections", Int. J. Heat Mass Transf., 174, 121292. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121292.