Geomechanics and Engineering

  • 제29권1호
  • /
  • Pages.1-11
  • /
  • 2022
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Spherical cavity expansion in overconsolidated unsaturated soil under constant suction condition

  • Wang, Hui (Department of Civil Engineering, Tongji University) ;
  • Yang, Changyi (Department of Civil Engineering, Tongji University) ;
  • Li, Jingpei (Department of Civil Engineering, Tongji University)
  • 투고 : 2021.08.07
  • 심사 : 2022.02.11
  • 발행 : 2022.04.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A semi-analytical solution to responses of overconsolidated (OC) unsaturated soils surrounding an expanding spherical cavity under constant suction condition is presented. To capture the elastoplastic hydro-mechanical property of OC unsaturated soils, the unified hardening (UH) model for OC unsaturated soil is adopted in corporation with a soil-water characteristic curve (SWCC) and two suction yield surfaces. Taking the specific volume, radial stress, tangential stress and degree of saturation as the four basic unknowns, the problem investigated is formulated by solving a set of first-order ordinary differential equations with the help of an auxiliary variable and an iterative algorithm. The present solution is validated by comparing with available solution based on the modified Cam Clay (MCC) model. Parametric studies reveal that the hydraulic and mechanical responses of spherical cavity expanding in unsaturated soils are not only coupled, but also affected by suction and overconsolidation ratio (OCR) significantly. More importantly, whether hydraulic yield will occur or not depends only on the initial relationship between suction yield stress and suction. The presented solution can be used for calibration of some insitu tests in OC unsaturated soil.

키워드

과제정보

The authors are grateful for the financial support provided by the National Natural Science Foundation of China (Grant No. 41772290) for this research work.

참고문헌

  1. Agaiby, S.S. and Mayne, P.W. (2018), "Interpretation of piezocone penetration and dissipation tests in sensitive Leda clay at Gloucester test site", Can. Geotech. J., 55(12), 1781-1794. https://doi.org/10.1139/cgj-2017-0388.
  2. Alonso, E.E., Gens, A. and Josa, A. (1990), "A constitutive model for partially saturated soils", Geotechnique, 40(3), 405-430. https://doi.org/10.1680/geot.1990.40.3.405.
  3. Bolton, M.D. and Whittle, R.W. (1999), "A non-linear elastic/perfectly plastic analysis for plane strain undrained expansion tests", Geotechnique, 49(1), 133-141. https://doi.org/10.1680/geot.1999.49.1.133.
  4. Carter, J.P., Booker, J.R. and Yeung, S.K. (1986), "Cavity expansion in cohesive frictional soils", Geotechnique, 36(3), 349-358. https://doi.org/10.1680/geot.1986.36.3.349.
  5. Charlez, P.A. and Roatesi, S. (1999), "A fully analytical solution of the wellbore stability problem under undrained conditions using a linearized Cam-Clay model", Oil Gas Sci. Technol. 54(5), 551-563. https://doi.org/10.2516/ogst:1999047.
  6. Chen, H.H. and Mo, P.Q. (2022), "An undrained expansion solution of cylindrical cavity in SANICLAY for K0-consolidated clays", J. Rock Mech. Geotech. Eng., https://doi.org/10.1016/j.jrmge.2021.10.016.
  7. Chen, H.H. and Zhang, L.Y. (2022), "A machine learning-based method for predicting end-bearing capacity of rock-socketed shafts", Rock Mech. Rock Eng., https://doi.org/10.1007/s00603-021-02757-9.
  8. Chen, H.H., Li, L., Li, J.P. and Sun, D.A. (2022), "A generic analytical elastic solution for excavation responses of an arbitrarily-shaped deep opening under biaxial in-situ stresses", Int. J. Geomech., 22(4), 04022023. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002335.
  9. Chen, S.L. and Abousleiman, Y.N. (2013), "Exact drained solution for cylindrical cavity expansion in modified cam clay soil", Geotechnique, 63(6), 510-517. https://doi.org/10.1680/geot.11.P.088.
  10. Chen, S.L. and Abousleiman, Y.N. (2012), "Exact undrained elasto-plastic solution for cylindrical cavity expansion in modified cam clay soil", Geotechnique, 62(5), 447-456. https://doi.org/10.1680/geot.11.P.027.
  11. Cheng, Y., Yang, H.W. and Sun, D.A. (2018), "Cavity expansion in unsaturated soils of finite radial extent", Comput. Geotech., 102, 216-228. https://doi.org/10.1016/j.compgeo.2018.06.013.
  12. Collins, I.F., Pender, M.J. and Wang, Y. (1992), "Cavity expansion in sands under drained loading conditions", Int. J. Numer. Anal. Met., 16(1), 3-23. https://doi.org/10.1002/nag.1610160103.
  13. Collins, I.F. and Stimpson, J.R. (1994), "Similarity solutions for drained and undrained cavity expansions in soils", Geotechnique, 44(1), 21-34. https://doi.org/10.1680/geot.1994.44.1.21.
  14. Cudmani, R. and Osinov, V.A. (2001), "The cavity expansion problem for the interpretation of cone penetration and pressuremeter tests", Can. Geotech. J., 38(3), 622-638. https://doi.org/10.1139/cgj-38-3-622.
  15. Diao, H.J., Wu, Y.D., Liu, J. and Luo, R.P., (2015), "An analytical investigation of soil disturbance due to sampling penetration", Geomech. Eng., 9(6), 743-755. https://doi.org/10.12989/gae.2015.9.6.743.
  16. Fahimifar, A., Ghadami, H. and Ahmadvand, M. (2015), "The ground response curve of underwater tunnels, excavated in a strain-softening rock mass", Geomech. Eng., 8(3), 323-359. https://doi.org/10.12989/gae.2015.8.3.323.
  17. Frydman, S. (2011), "Characterizing the geotechnical properties of natural, Israeli, partially cemented sands", Geomech. Eng., 3(4), 323-337. https://doi.org/10.12989/gae.2011.3.4.323.
  18. Gong, W.B., Li, J.P., Li, L. and Zhang, S. (2017), "Evolution of mechanical properties of soils subsequent to a pile jacked in natural saturated clays", Ocean Eng., 136, 209-217. https://doi.org/10.1016/j.oceaneng.2017.03.020.
  19. Gong, W.B., Yang, C.Y., Li, J.P. and Xu, L.C. (2020), "Undrained cylindrical cavity expansion in modified Cam-clay soil: a semi-analytical solution considering biaxial in-situ stresses", Comput. Geotech., 130, 103888. https://doi.org/10.1016/j.compgeo.2020.103888.
  20. Hoek, E. (2001). "Big tunnels in bad rock." J. Geotech. Geoenviron. Eng., 127(9), 726-740. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:9(726).
  21. Li, C. and Zou, J.F. (2019), "Created cavity expansion solution in anisotropic and drained condition based on Cam-clay model", Geomech. Eng., 19(2), 141-151. https://doi.org/10.12989/gae.2019.19.2.141.
  22. Liu, F., Yi, J.T., Cheng, P. and Yao, K. (2020), "Numerical simulation of set-up around shaft of XCC pile in clay", Geomech. Eng., 21(5), 489-501. https://doi.org/10.12989/gae.2020.21.5.489.
  23. Lukic, D.C., Prokic, A.D. and Brcic, S.V. (2014), "Stress state around cylindrical cavities in transversally isotropic rock mass", Geomech. Eng., 6(3), 213-233. https://doi.org/gae.2014.6.3.213. https://doi.org/10.12989/gae.2014.6.3.213
  24. Mayne, P.W. (1991), "Determination of OCR in clays by piezocone tests using cavity expansion and critical state concepts", Soils Found., 31(2), 65-76. https://doi.org/10.3208/sandf1972.31.2_65.
  25. Palmer A.C. (1972), "Undrained plane-strain expansion of a cylindrical cavity in clay- simple interpretation of pressuremeter test", Geotechnique, 22(3), 451-457. https://doi.org/10.1680/geot.1972.22.3.451.
  26. Rao, P.P., Chen, Q., Li, L., Nimbalkar, S. and Cui, J. (2017), "Elastoplastic solution for spherical cavity expansion in modified cam-clay soil under drained condition", Int. J. Geomech., 17(8). https://doi.org/10.1061/(asce)gm.1943-5622.0000925.
  27. Rezania, M., Nezhad, M.M., Zanganeh, H., Castro, J. and Sivasithamparam, N. (2017), "Modeling pile setup in natural clay deposit considering soil anisotropy, structure, and creep effects: case study", Int. J. Geomech., 17(3), 1-13. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000774.
  28. Russell, A.R. and Khalili, N. (2004), "Cavity expansion in unsaturated sands", Proceedings of the 4th European Congress on Computational Methods in Applied Sciences and Engineering, Jyvaskyla.
  29. Russell, A.R. and Khalili, N. (2006), "On the problem of cavity expansion in unsaturated soils", Comput. Mech., 37(4), 311-330. https://doi.org/10.1007/s00466-005-0672-7.
  30. Salgado, R. and Randolph, M.F. (2001), "Analysis of cavity expansion in sand." Int. J. Geomech., 1(2), 175-192. https://doi.org/10.1061/(ASCE)1532-3641(2001)1:2(175).
  31. Silvestri, V. and Abou-Samra, G. (2012), "Analytical solution for undrained plane strain expansion of a cylindrical cavity in modified cam clay", Geomech. Eng., 4(1), 19-37. https://doi.org/10.12989/gae.2012.4.1.019.
  32. Sivasithamparam, N. and Castro, J. (2018), "Undrained expansion of a cylindrical cavity in clays with fabric anisotropy: Theoretical solution", Acta Geotech., 13(3), 729-746. https://doi.org/10.1007/s11440-017-0587-4.
  33. Sun, D.A., Sheng, D.C., Xiang, L. and Sloan, S.W. (2008). "Elastoplastic prediction of hydromechanical behaviour of unsaturated soils under undrained conditions", Comput. Geotech., 35(6), 845-852. https://doi.org/10.1016/j.compgeo.2008.08.002.
  34. Vrakas, A. (2016), "A rigorous semi-analytical solution for undrained cylindrical cavity expansion in critical state soils", Int. J. Numer. Anal. Meth. Geomech., 40(15), 2137-2160. https://doi.org/10.1002/nag.2529.
  35. Yang, C.Y., Chen, H.H., Li, J.P. and Li, L. (2021), "Undrained spherical cavity expansion in unsaturated soils: Semi-analytical solution coupling hydraulic and mechanical behaviors", Int. J. Geomech., 21(6), 04021070. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002028.
  36. Yang, C.Y., Li, J.P., Li, L. and Sun, D.A. (2020), "Expansion responses of a cylindrical cavity in overconsolidated unsaturated soils: A semi-analytical elastoplastic solution", Comput. Geotech., 130. https://doi.org/10.1016/j.compgeo.2020.103922.
  37. Yang, H. and Russell, A.R. (2015), "Cavity expansion in unsaturated soils exhibiting hydraulic hysteresis considering three drainage conditions", Int. J. Numer. Anal. Met., 39(18), 1975-2016. https://doi.org/10.1002/nag.2379.
  38. Yao, Y.P., Niu, L. and Cui, W.J. (2014), "Unified hardening (UH) model for overconsolidated unsaturated soils", Can. Geotech. J., 51(7), 810-821. https://doi.org/10.1139/cgj-2013-0183.
  39. Zhang, J.P., Liu, T. and Pei, J.Z. (2020), "Settlement characteristics of bridge approach embankment based on scale model test", J. Cent. South. Univ. T., 27, 1956-1964. https://doi.org/10.1007 /s11771-020-4422-y. https://doi.org/10.1007/s11771-020-4422-y
  40. Zhou, X.Y., He, L.Q. and Sun, D.A. (2022), "Three-dimensional thermal modeling and dimensioning design in the nuclear waste repository", Int. J. Numer. Anal. Met., 46(4), 779-797. https://doi.org/10.1002/nag.3321.
  41. Zou, J.F., Yang, T., Ling, W., Guo, W.J. and Huang, F.L. (2019), "A numerical stepwise approach for cavity expansion problem in strain-softening rock or soil mass", Geomech. Eng., 18(3), 225-234. https://doi.org/10.12989/gae.2019.18.3.225.