Structural Engineering and Mechanics

  • 제82권1호
  • /
  • Pages.41-53
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

An energy-based vibration model for beam bridges with multiple constraints

  • Huang, Shiping (School of Civil Engineering and Transportation, South China University of Technology) ;
  • Zhang, Huijian (School of Civil Engineering and Transportation, South China University of Technology) ;
  • Chen, Piaohua (School of Civil Engineering and Transportation, South China University of Technology) ;
  • Zhu, Yazhi (Department of Structural Engineering, Tongji University) ;
  • Zuazua, Enrique (Dynamics, Control and Numerics, Alexander von Humboldt-Professorship, Department of Data Science, Friedrich-Alexander-Universitat Erlangen-Nurnberg)
  • 투고 : 2021.07.10
  • 심사 : 2022.01.21
  • 발행 : 2022.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

We developed an accurate and simple vibration model to calculate the natural frequencies and their corresponding vibration modes for multi-span beam bridges with non-uniform cross-sections. A closed set of characteristic functions of a single-span beam was used to construct the vibration modes of the multi-span bridges, which were considered single-span beams with multiple constraints. To simplify the boundary conditions, the restraints were converted into spring constraints. Then the functional of the total energy has the same form as the penalty method. Compared to the conventional penalty method, the penalty coefficients in the proposed approach can be calculated directly, which can avoid the iteration process and convergence problem. The natural frequencies and corresponding vibration modes were obtained via the minimum total potential energy principle. By using the symmetry of the eigenfunctions or structure, the matrix size can be further reduced, which increases the computational efficiency of the proposed model. The accuracy and efficiency of the proposed approach were validated by the finite element method.

키워드

과제정보

S.P. Huang was supported by the National Natural Science Foundation of China (NSFC) (grant no. 11672108,11202080) and the Fundamental Research Funds for the Central Universities. Zuazua's project has received funding from the European Research Council (ERC) under the European Unionas Horizon 2020 research and innovation programme (grant agreement NO. 694126-DyCon). The work of both authors was partially supported by the Grant MTM2017-92996-C2-1-R COSNET of MINECO (Spain) and by the Air Force Office of Scientific Research (AFOSR) under Award NO. FA9550-18-1-0242. The work of E.Z. was partially funded by the Alexander von Humboldt-Professorship program, the European Unions Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No.765579-ConFlex, the Grant ICON-ANR-16-ACHN-0014 of the French ANR and the Transregio 154 Project "Mathematical Modelling, Simulation and Optimization Using the Example of Gas Networks" of the German DFG.

참고문헌

  1. Memory, T., Thambiratnam, D. and Brameld, G. (1995), "Free vibration analysis of bridges", Eng. Struct., 17(10), 705-713. https://doi.org/10.1016/0141-0296(95)00037-8.
  2. Weaver Jr, W., Timoshenko, S.P. and Young, D.H. (1990), Vibration Problems in Engineering, John Wiley & Sons, Hoboken, NJ, USA.
  3. Salawu, O.S. (1997), "Detection of structural damage through changes in frequency: A review", Eng. Struct., 19(9), 718-723. https://doi.org/10.1016/s0141-0296(96)00149-6.
  4. Zhou, Y.J., Zhao, Y., Liu, J. and Jing, Y. (2021), "Unified calculation model for the longitudinal fundamental frequency of continuous rigid frame bridge", Struct. Eng. Mech., 77(3), 343-354. https://doi.org/10.12989/sem.2021.77.3.343.
  5. Dallard, P., Fitzpatrick, A., Flint, A., Le Bourva, S., Low, A., Ridsdill Smith, R. and Willford, M. (2001), "The london millennium footbridge", Struct. Eng., 79(22), 17-33.
  6. AASHTO, L. (2012), Aashto lrfd Bridge Design Specifications. American Association of State Highway and Transportation Officials, Washington, DC, USA.
  7. Spencer Jr, B., Ruiz-Sandoval, M.E. and Kurata, N. (2004), "Smart sensing technology: Opportunities and challenges", Struct. Control Hlth. Monit., 11(4), 349-368. https://doi.org/10.1002/stc.48.
  8. Zhu, J., Wang, W., Huang, S. and Ding, W. (2020), "An improved calibration technique for mems accelerometer-based inclinometers", Sensor., 20(2), 452. https://doi.org/10.3390/s20020452.
  9. El Gamal, A. and Eltoukhy, H. (2005), "Cmos image sensors", IEEE Circuit. Devic. Mag., 21(3), 6-20. https://doi.org/10.1109/mcd.2005.1438751.
  10. Yu, L.P. and Pan, B. (2017), "Single-camera high-speed stereo-digital image correlation for full-field vibration measurement", Mech. Syst. Signal Pr., 94, 374-383. http://doi.org/10.1016/j.ymssp.2017.03.008.
  11. Cooley, J.W., Lewis, P.A. and Welch, P.D. (1969), "The fast fourier transform and its applications", IEEE Tran. Edu., 12(1), 27-34. https://doi.org/10.1109/TE.1969.4320436.
  12. Antonini, M., Barlaud, M., Mathieu, P. and Daubechies, I. (1992), "Image coding using wavelet transform", IEEE Tran. Image Proc., 1(2), 205-220. https://doi.org/10.1109/83.136597.
  13. Huang, N.E., Shen, Z., Long, S.R., Wu, M.C., Shih, H.H., Zheng, Q., Yen, N.C., Tung, C.C. and Liu, H.H. (1998), "The empirical mode decomposition and the hilbert spectrum for nonlinear and non-stationary time series analysis", Proc. Roy. Soc. London. Ser. A: Math. Phys. Eng. Sci., 454(1971), 903-995. https://doi.org/10.1098/rspa.1998.0193.
  14. Hughes, T.J. (2012), The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, Courier Corporation, N Chelmsford, MA, USA.
  15. Zienkiewicz, O.C., Taylor, R.L., Nithiarasu, P. and Zhu, J. (1977), The Finite Element Method, McGraw-Hill, New York, NY, USA.
  16. Kolousek, V. (1941), "Anwendung des gesetzes der virtuellen verschiebungen und des reziprozitatssatzes in der stabwerksdynamik", Ingenieur-Archiv, 12(6), 363-370. https://doi.org/10.1007/bf02089894.
  17. Huang, Y., Gan, Q., Huang, S. and Wang, R. (2018), "A dynamic finite element method for the estimation of cable tension", Struct. Eng. Mech., 68(4), 399-408. https://doi.org/10.12989/sem.2018.68.4.399.
  18. Ryall, M.J., Hewson, N., Parke, G. and Harding, J. (2000), The Manual of Bridge Engineering, Thomas Telford, London, UK.
  19. Jaeger, L.G. and Bakht, B. (1982), "The grillage analogy in bridge analysis", Can. J. Civil Eng., 9(2), 224-235. https://doi.org/10.1139/l82-025.
  20. Lu, P.Z., Zhang, J.P., Zhao, R.D. and Huang, H.Y. (2009), "Theoretical analysis of Y-shape bridge and application", Struct. Eng. Mech., 31(2), 137-152. https://doi.org/10.12989/sem.2009.31.2.137.
  21. Sun, Y., Dai, S.C., Xu, D., Zhu, H.P. and Wang, X.M. (2020), "New extended grillage methods for the practical and precise modeling of concrete box-girder bridges", Adv. Struct. Eng., 23(6), 1179-1194. https://doi.org/10.1177/1369433219891559.
  22. Song, M.K. and Fujino, Y. (2008), "Dynamic analysis of guideway structures by considering ultra high-speed Maglev train-guideway interaction", Struct. Eng. Mech., 29(4), 355-380. https://doi.org/10.12989/sem.2008.29.4.355.
  23. Zeng, Z.P., He, X.F., Zhao, Y.G., et al. (2015), "Random vibration analysis of train-slab track-bridge coupling system under earthquakes", Struct. Eng. Mech., 54(5), 1017-1044. https://doi.org/10.12989/sem.2015.54.5.1017.
  24. Humar, J. (2012), Dynamics of Structures, CRC Press, Boca Raton, FL, USA.
  25. Saibel, E. (1944), "Vibration frequencies of continuous beams", J. Aeronaut. Sci., 11(1), 88-90. https://doi.org/10.2514/8.11101.
  26. Bertsekas, D.P. (2014), Constrained Optimization and Lagrange Multiplier Methods, Academic press, New York, NY, USA.
  27. Culver, C. and Oestel, D. (1969), "Natural frequencies of multispan curved beams", J. Sound Vib., 10(3), 380-389. https://doi.org/10.1016/0022-460x(69)90216-8.
  28. Cook, R.D. (2007), Concepts and Applications of Finite Element Analysis, John Wiley & Sons, Hoboken, NJ, USA.
  29. Vargas, D.E., Lemonge, A.C., Barbosa, H.J., Bernardino, H.S. (2019), "Differential evolution with the adaptive penalty method for structural multi-objective optimization", Optimiz. Eng., 20(1), 65-88. https://doi.org/10.1007/s11081-018-9395-4.
  30. Parlett, B.N. (1998), The Symmetric Eigenvalue Problem. Siam, Philadelphia, PA, USA.
  31. Edwards, R.E. (2012), Fourier Series: A Modern Introduction, Springer Science & Business Media, Berlin, Germany.
  32. Welch, P. (1967), "The use of fast fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms", IEEE Tran. Audio Electroacoust., 15(2), 70-73. https://doi.org/10.1109/tau.1967.1161901.
  33. McCormac, J.C. and Elling, R.E. (1988), Structural Analysis: A Classical and Matrix Approach, Harper & Row, New York, NY, USA.
  34. Wilbur, J.B. (1948), Elementary Structural Analysis, McGraw-Hill International Book Company, New York, NY, USA.