DOI QR코드

DOI QR Code

상수도 관망의 노드-파이프-밸브 사이의 상대적 위치 관계를 수립하기 위한 알고리즘의 개발

Development of the algorithms for establishing the relative positional relations between node-pipe-valve of water pipe networks

  • Park, Suwan (Department of Civil and Environmental Engineering, Pusan National University) ;
  • Jeon, Ye Jun (Department of Civil and Environmental Engineering, Pusan National University) ;
  • Kim, Kyeong Cheol (Samyoung Technology) ;
  • Lee, Hyun Dong (Korea Institute of Civil Engineering and Building Technology)
  • 투고 : 2022.09.05
  • 심사 : 2022.09.27
  • 발행 : 2022.12.31

초록

관망의 세그먼트를 파악하기 위한 알고리즘을 구동시키기 위해서는 관망의 주요 구성요소들인 절점, 파이프, 및 밸브 간의 상대적인 위치 관계를 세그먼트 탐색 알고리즘의 입력정보로 준비해야 한다. 실제 지자체 관망에 존재하는 세그먼트를 보다 정확하게 파악하기 위해서는 관망 수리해석 프로그램 구동을 위해 모델링된 관망 정보를 이용하기 보다는, 모든 제수밸브가 포함된 지자체 상수도 관망 GIS/CAD 데이터베이스를 이용하여 세그먼트 탐색에 적합하게 재구성된 관망 정보를 이용할 필요가 있다. 본 연구에서는 지자체 상수도 관망 GIS/CAD 데이터를 이용하여 관망 세그먼트 탐색에 적합한 노드-파이프-밸브 간의 상대적 위치관계를 수립할 수 있는 컴퓨터 계산 알고리즘을 개발하였으며, 이를 구현할 수 있는 MATLAB 프로그램을 개발하였다. 개발된 MATLAB 프로그램을 국내 지자체 상수도 관망에 적용하여 그 실효성을 확인하였다.

To run the algorithm for identifying the segments of a pipe network, the relative positional relation between nodes, pipes, and valves should be prepared as input information of a segment search algorithm. In order to more accurately identify the segments of real pipe network, pipe network GIS/CAD database that contains all isolation valves is more suitable than modeled pipe network information used for a hydraulic analysis program. In this study, we developed an algorithm that can establish the relative positional relations among node-pipe-valve suitable for pipe network segment search algorithms using GIS/CAD data of a real water supply network, and developed a MATLAB program that can implement it. The effectiveness of the developed MATLAB program was confirmed by applying it to a portion of a real municipal pipe network.

키워드

과제정보

이 과제는 부산대학교 기본연구지원사업(2년)에 의하여 연구되었음.

참고문헌

  1. Alvisi, S., Creaco, E., and Franchini, M. (2011). "Segment identification in water distributionsystems." Urban Water Journal, Vol. 8, No. 4, pp. 203-217.  https://doi.org/10.1080/1573062X.2011.595803
  2. Creaco, E., Franchini. M., and Alvisi, S. (2010). "Optimal placement of isolation valves in water distribution systems based on valve cost and weighted average demand shortfall." Water Resources Management, Vol. 24, pp. 4317-4338. 
  3. Giustolisi, O., and Savic, D. (2010). "Identification of segments and optimal isolation valve system design in water distribution networks." Urban Water Journal, Vol. 7, No. 1, pp. 1-15.  https://doi.org/10.1080/15730620903287530
  4. Hernandez, E.H., and Ormsbee, L. (2021a). "Segment-based assessment of consequences of failure on water distribution systems." Journal of Water Resources Planning and Management, Vol. 147, No. 4, pp. 1-10. 
  5. Hernandez, E.H., and Ormsbee, L. (2021b). "Segment identification procedure for water distribution systems." Journal of Water Resources Planning and Management, Vol. 147, No. 5, pp. 1-11. 
  6. Jeong, H.M. (2003). Secondary water pollution and management plan (2003). Water Management Policy Discussion Committee Research Report, Prime Minister's Water Quality Improvement Planning Team, pp. 401-466. 
  7. Jun, H. (2006). "An evaluation of the pipe failure impact in a water distribution system considering subsystem isolation." Journal of Korea Water Resources Association, Vol. 39, No. 2, pp. 89-98.  https://doi.org/10.3741/JKWRA.2006.39.2.089
  8. Jun, H., and Loganathan, G.V. (2007). "Valve-controlled segments in water distribution systems." Journal of Water Resources Planning and Management, Vol. 133, No. 2, pp. 145-155. 
  9. Li, P.H., and Kao, J.J. (2008). "Segment-based vulnerability analysis system for a wa-ter distribution network." Civil Engineering and Environmental Systems, Vol. 25, No. 1, pp. 41-58.  https://doi.org/10.1080/10286600701838709
  10. Park, S., and Kim, K.M. (2017). "Development of new computational methods for identifying segments and estimating the risk of water supply interruption for a segment in water pipe networks." Desalination and Water Treatment, Vol. 99, pp. 211-219.  https://doi.org/10.5004/dwt.2017.21638
  11. Walski, T.M. (1993a). "Practical aspects of providing reliability in water distribution systems." Reliability Engineering and System Safety, Vol. 42, pp. 13-19.  https://doi.org/10.1016/0951-8320(93)90050-9
  12. Walski, T.M. (1993b). "Water distribution valve topology for reliabiltiy analysis." Reliability Engineering and System Safety, Vol. 42, pp. 21-27.  https://doi.org/10.1016/0951-8320(93)90051-Y