과제정보
This research was supported by the National Research Foundation of Korea (Project Number: NRF-2021R1A2C3011490). This financial support is gratefully acknowledged.
참고문헌
- Alikarami, R., Ando, E., et al. (2014), Strain localisation and grain breakage in sand under shearing at high mean stress: insights from in situ X-ray tomography, Acta Geotechnica, Vol.10, No.1, pp.15-30. https://doi.org/10.1007/s11440-014-0364-6
- ASTM Standard D2487-17, (2017), Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), ASTM International, West Conshohocken, Pennsylvania.
- ASTM Standard D6637/D6637M-15, (2015), Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method, ASTM International, West Conshohocken, Pennsylvania, USA.
- Blaber, J., Adair, B., et al. (2015), Ncorr: Open-Source 2D Digital Image Correlation Matlab Software, Experimental Mechanics, Vol.55, No.6, pp.1105-1122. https://doi.org/10.1007/s11340-015-0009-1
- Bransby, P. L. (1968), Stress and strain in sand caused by rotation of a model wall, University of Cambridge.
- Burke, T. S. D. and Elshafie, M. (2021), Geosynthetic-reinforced soils above voids: Observation and prediction of soil arching, Geotextiles and Geomembranes, Vol.49, No.3, pp.579-592. https://doi.org/10.1016/j.geotexmem.2020.11.005
- Chen, J. F., Guo, X. P., et al. (2021), Physical and numerical modelling of strip footing on geogrid reinforced transparent sand, Geotextiles and Geomembranes, Vol.49, No.2, pp.399-412. https://doi.org/10.1016/j.geotexmem.2020.10.011
- Cheng, Z. and Wang, J. F. (2019), Quantification of the strain field of sands based on X-ray micro-tomography: A comparison between a grid-based method and a mesh-based method, Powder Technology, Vol.344, pp.314-334. https://doi.org/10.1016/j.powtec.2018.12.048
- Das, B. M. (2021), Principles of geotechnical engineering: Cengage learning.
- Dematteis, N. and Giordan D. (2021), Comparison of Digital Image Correlation Methods and the Impact of Noise in Geoscience Applications. Remote Sensing, Vol.13, No.2, https://doi.org/10.3390/rs13020327
- Dewoolkar, M. M., Santichaianant, K., et al. (2007), Centrifuge modeling of granular soil response over active circular trapdoors, Soils and Foundations, Vol.47, No.5, pp.931-945. https://doi.org/10.3208/sandf.47.931
- Fang, Y. S., Chen, T. J., et al. (1994), Passive earth pressures with various wall movements, Journal of Geotechnical Engineering-Asce, Vol.120, No.8, pp.1307-1323. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:8(1307)
- Gao, Y., Cheng, T., et al. (2015), High-efficiency and high-accuracy digital image correlation for three-dimensional measurement, Optics and Lasers in Engineering, Vol.65, pp.73-80. https://doi.org/10.1016/j.optlaseng.2014.05.013
- Han, J. and Gabr, M. A. (2002), Numerical analysis of geosynthetic-reinforced and pile-supported earth platforms over soft soil, Journal of Geotechnical and Geoenvironmental Engineering, Vol.128, No.1, pp.44-53. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:1(44)
- Khatami, H., Deng, A., et al. (2019), An experimental study of the active arching effect in soil using the digital image correlation technique, Computers and Geotechnics, Vol.108, pp.183-196. https://doi.org/10.1016/j.compgeo.2018.12.023
- Lai, H. J., Zheng, J. J., et al. (2020), "Soil arching" for piled embankments: insights from stress redistribution behaviour of DEM modelling, Acta Geotechnica, Vol.15, No.8, pp.2117-2136. https://doi.org/10.1007/s11440-019-00902-x
- Liao, D. and Yang, Z. X. (2021), Effect of fabric anisotropy on bearing capacity and failure mode of strip footing on sand: An anisotropic model perspective, Computers and Geotechnics, Vol.138.
- Liu, X. J., Jing, L. I., et al. (2017), Study on Soil Temperature Measurement Based on Fiber Bragg Grating Sensing Technology in Cross Seasonal Heat Storage, Optics & Optoelectronic Technology.
- Luque, R. and Bray, J. D. (2017), Dynamic Analyses of Two Buildings Founded on Liquefiable Soils during the Canterbury Earthquake Sequence, Journal of Geotechnical and Geoenvironmental Engineering, Vol.143. No.9.
- Mei, G. X., Chen, Q. M., et al. (2009), Model for predicting displacement-dependent lateral earth pressure, Canadian Geotechnical Journal, Vol.46, No.8, pp.969-975. https://doi.org/10.1139/T09-040
- Michalowski, R. L. and Shi, L. (2003), Deformation patterns of reinforced foundation sand at failure, Journal of Geotechnical and Geoenvironmental Engineering, Vol.129, No.5, pp.439-449. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:6(439)
- Ni, P. P., Mangalathu, S., et al. (2018), Displacement-Dependent Lateral Earth Pressure Models, Journal of Engineering Mechanics, Vol.144, No.6.
- Niedostatkiewicz, M., Lesniewska, D., et al. (2011), Experimental Analysis of Shear Zone Patterns in Cohesionless for Earth Pressure Problems Using Particle Image Velocimetry, Strain, Vol.47, pp.218-231. https://doi.org/10.1111/j.1475-1305.2010.00761.x
- Pan, B., Qian, K., et al. (2009), Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review, Measurement science and technology, Vol.20, No.6, 062001. https://doi.org/10.1088/0957-0233/20/6/062001
- Pan, B., Xie, H., et al. (2008), Study on subset size selection in digital image correlation for speckle patterns, Optics express, Vol.16, No.10, pp.7037-7048. https://doi.org/10.1364/OE.16.007037
- Peters, W., Ranson, W., et al. (1983), Application of digital correlation methods to rigid body mechanics, Optical Engineering, Vol.22, No.6, 226738.
- Petley, D. (2012), Global patterns of loss of life from landslides, Geology, Vol.40, No.10, pp.927-930. https://doi.org/10.1130/G33217.1
- Pitas, I. (2000), Digital image processing algorithms and applications: John Wiley & Sons.
- Stanier, S. A., Blaber, J., et al. (2016), Improved image-based deformation measurement for geotechnical applications, Canadian Geotechnical Journal, Vol.53, No.5, pp.727-739. https://doi.org/10.1139/cgj-2015-0253
- Tafreshi, S. N. M. and Dawson, A. R. (2010), Comparison of bearing capacity of a strip footing on sand with geocell and with planar forms of geotextile reinforcement, Geotextiles and Geomembranes, Vol.28, No.1, pp.72-84. https://doi.org/10.1016/j.geotexmem.2009.09.003
- Tan, X., Zhao, M. H., et al. (2020), Failure Process of a Single Stone Column in Soft Soil beneath Rigid Loading: Numerical Study, International Journal of Geomechanics, Vol.20, No.8.
- Terzaghi, K. (1943). Arching in ideal soils, Theoretical soil mechanics, pp.66-76.
- Terzaghi, K., Peck, R. B., et al. (1996), Soil mechanics in engineering practice: John Wiley & Sons.
- Yao, C. F. and Takemura, J. (2019), Using laser displacement transducer scanning technique in centrifuge modeling of reverse fault-foundation interaction, Soil Dynamics and Earthquake Engineering, Vol.121, pp.219-232. https://doi.org/10.1016/j.soildyn.2019.03.018
- Zhao, Y., Gong, Q. M., et al. (2021), Evolution of active arching in granular materials: Insights from load, displacement, strain, and particle flow, Powder Technology, Vol.384, pp.160-175. https://doi.org/10.1016/j.powtec.2021.02.011