Journal of the Korean Society for Aeronautical & Space Sciences (한국항공우주학회지)

The Korean Society for Aeronautical and Space Sciences (한국항공우주학회)
권호 표지
DOI QR코드

DOI QR Code

Elapsed-time Method With Tacho Pulse Non-uniformity Correction

타코펄스 불균일성 보정이 포함된 펄스간 시간 측정방법

  • Received : 2022.01.10
  • Accepted : 2022.03.08
  • Published : 2022.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

In ideal configuration, elapsed-time method can measure the exact reaction wheel speed. But in real configuration, the speed measurement error exists due to tacho pulse non-uniformity. In this research, we study the method which overcome the non-uniformity effects. First, we introduce the method which spin the wheel at the specific speed and measure the non-uniformity. Then, we propose the real-time measurement error correction method which uses the obtained non-uniformity information. This method calculate the speed candidates from the elapsed-time method's counts and non-uniformity information, and choose the closest speed to the real speed. Through simulation, we show that proposed method measure the exact speed regardless of non-uniformity, and fast wheel speed control is possible.

펄스간 시간측정방법은 이상적인 조건에서는 정확한 반작용휠 속도를 측정할 수 있지만, 실제로는 타코펄스 불균일성 때문에 측정속도 오차가 존재한다. 본 연구에서는 불균일성을 극복하는 방법을 살펴본다. 우선 휠을 특정한 속도로 회전시켜서 타코펄스 불균일성을 측정하는 방법을 소개한다. 이렇게 획득된 불균일성 정보를 이용하여 실시간으로 측정오차를 보정하는 방법을 제안한다. 해당 방법은 펄스간 시간 측정방법의 카운트와 사전 측정된 불균일 정보로부터 속도 후보군을 계산하고, 이중에서 실제속도와 가장 가까운 값을 선택한다. 시뮬레이션을 통해서 제안된 방법이 타코펄스 불균일성을 극복하고 정확한 속도를 측정하며 빠른 휠속도 제어도 가능함을 보인다.

Keywords

References

  1. Petrella, R., Tursini, M., Peretti, L. and Zigliotto, M., "Speed Measurmenet Algorithms for Low-Resolution Incremental Encoder Equipped Drives: a Comparative Analysis," 2007 International Aegean Conference on Electrical Machines and Power Electronics, September 2007, pp. 780~787.
  2. Lygouras, J. N., Pachidis, T. P., Tarchanidis, K. N. and Kodogiannis, V. S., "Adaptive High-Performance Velocity Evalution Based on a High-Resolution Time to Digital Converter," IEEE Transactions on Instrumentation and Measurement, Vol. 57, No. 9, September 2008, pp. 2035~2043. https://doi.org/10.1109/TIM.2008.919039
  3. Tsuji, T., Kobayashi, H., Mizuochi, M. and Ohnishi, K., "A Wide-Range Velocity Measurement Method for Motion Control," IEEE Transactions on Industrial Electronics, Vol. 56, No. 2, February 2009, pp. 510~519. https://doi.org/10.1109/TIE.2008.2003208
  4. Oh, S.-H. and Yong, K.-L., "Error Analysis of ReactionWheel Speed Detection Methods due to Non-uniformity of Tacho Pulse Duration," Aerospace Engineering and Technology, Vol. 8, No. 2, 2009, pp. 92~97.
  5. Kavanagh, R. C., "Improved Digital Tachometer With Reduced Sensitivity to Sensor Nonideality," IEEE Transactions on Industrial Electronics, Vol. 47, No. 4, August 2000, pp. 890~897. https://doi.org/10.1109/41.857969
  6. Kavanagh, R. C., "Performance Analysis and Compensation of M/T-Type Digital Tachometers," IEEE Transactions on Instrumentation and Measurement, Vol. 50, No. 4, August 2001, pp. 965~970. https://doi.org/10.1109/19.948308
  7. Lee, J.-N., Park, S.-H., Heu, S.-J. and Lee, Y.-K., "The Implementation of the Speed Measurement Board for Reaction Wheel on the LEO Satellite using the T, M-Method," Journal of The Korean Society for Aeronautical and Space Sciences, Vol. 40, No. 9, 2012, pp. 827~832. https://doi.org/10.5139/JKSAS.2012.40.9.827
  8. Son, J.-W., "Tacho Pulse Non-uniformity Effects on Pulse Count Method," Journal of The Korean Society for Aeronautical and Space Sciences, Vol. 49, No. 4, 2021, pp. 301~309. https://doi.org/10.5139/JKSAS.2021.49.4.301