DOI QR코드

DOI QR Code

Microplastic release from damaged commercial teabags

  • Kim, Sion (Department of Environmental & IT Engineering, Chungnam University) ;
  • Jo, Eun Ha (Department of Environmental & IT Engineering, Chungnam University) ;
  • Choi, Soohoon (Department of Environmental Engineering, Chungnam University)
  • 투고 : 2021.05.31
  • 심사 : 2021.09.03
  • 발행 : 2022.01.25

초록

The use of plastics in our everyday lives have been drastically increased during the last few decades. However with the usage of commercial plastic products there is a possibility of microplastic consumption, due to the fragmentation of the products. Additionally, the potential for microplastic ingestion may also be increased by using damaged products. Hence, the current study was conducted to understand the potential release of micro/nano plastics and organic matter from damaged teabags. To check the leakage tendency, the amount of damage to the tea bags from 1-10 cm were tested along with temperatures of 25-70℃, and exposure times from 5 min to 1 hr was tested. Release of fibrous micro/nanoplastics, and organic leachate from the damaged teabags were observed to understand the outflow conditions. Results showed that with the increased degree of damage, temperature, and exposure time increased the release of fiberous matter, where the increase of temperature, and exposure time increased organic leachate. Additional analysis confirmed the leachate of nylon polymers into the heated water.

키워드

과제정보

The current work was supported by K water's Together PRO project (Project No. 2020-0015-01). Additionally we would like to thank the CNU Chemistry Core Facility (Daejeon, South Korea) for its aid in various analyses.

참고문헌

  1. Ateia, M., Kanan, A. and Karanfil, T. (2020), "Microplastics release precursors of chlorinated and brominated disinfection byproducts in water", Chemosphere, 251, 126452. https://doi.org/10.1016/j.chemosphere.2020.126452.
  2. Brahim, S.B. and Cheikh, R.B. (2007), "Influence of fibre orientation and volume fraction on the tensile properties of unidirectional Alfa-polyester composite", Compos. Sci. Technol., 67(1), 140-147. https://doi.org/10.1016/j.compscitech.2005.10.006.
  3. Briain, O.O., Marques Mendes, A.R., McCarron, S., Healy, M.G. and Morrison, L. (2020), "The role of wet wipes and sanitary towels as a source of white microplastic fibres in the marine environment", Water Res., 182, 116021. https://doi.org/10.1016/j.watres.2020.116021.
  4. Du, F., Cai, H., Zhang, Q. and Chen, Q., Shi, H. (2020), "Microplastics in take-out food containers", J. Hazard. Mater., 399, 122969. https://doi.org/10.1016/j.jhazmat.2020.122969.
  5. Hashin, Z., (1980), "Failure criteria for unidirectional fiber composites", J. Appl. Mech., 47(2), 329-334. https://doi.org/10.1115/1.3153664.
  6. Hernandez, L.M., Xu, E.G., Larsson, H.C.E., Tahara, R., Maisuria, V.B. and Tufenkji, M., (2019), "Plastic teabags release billions of microparticles and nanoparticles into tea", Environ. Sci. Technol., 53(21), 12300-12310. https://doi.org/10.1021/acs.est.9b02540.
  7. Hwang, J., Choi, D., Han, S., Choi, J. and Hong, J. (2020), "An assessment of the toxicity of polypropylene microplastics in human derived cells", Appl. Sci., 10(10), 3463. https://doi.org/10.1016/j.scitotenv.2019.05.071.
  8. Hwang, J., Choi, D., Han, S., Jung, S., Choi, J. and Hon, J. (2020), "Potential toxicity of polystyrene microplastic particles", Sci. Rep., 10(1), 7391. https://doi.org/10.1038/s41598-020-64464-9.
  9. Kyu, W.A., Hyung, S., Son, T., Hyun, S., Hae, Y. and Su, Y., (2018), "Current status of plastic pollution and the scientific policy to solve this problem", Research Report No. 123; Korean Academy of Science and Technology, Korea.
  10. Lagarde, F., Olivier, O., Zanella, M., Daniel, P., Hiard, S. and Caruso, A., (2016), "Microplastic interactions with freshwater microalgae: Heteroaggregation and changes in plastic density appear strongly dependent on polymer type", Environ. Pollut., 215, 331-339. http://doi.org/10.1016/j.envpol.2016.05.006.
  11. Lam, T.W.L., Ho, H.T., Ma, A.T. and Fok, L. (2020), "Microplastic contamination of surfacewater-sourced tap water in Hong Kong-A preliminary study", Appl. Sci., 10(10), 3463. https://doi.org/10.3390/app10103463.
  12. Lee, Y.K., Romera-Castillo, C., Hong, S. and Hur, J. (2020), "Characteristics of microplastic polymer-derived dissolved organic matter and its potential as a disinfection byproduct precursor", Water Res., 175, 115678. https://doi.org/10.1016/j.watres.2020.115678
  13. Lu, Y., Zhang, Y., Deng, Y., Jiang, W., Zhao, Y., Geng, J., Ding, L. and Ren, H. (2016), "Uptake and accumulation of polystyrene microplastics in zebrafish (Danio rerio) and toxic effects in liver" Environ. Sci. Technol., 50(7), 4054-4060. https://doi.org/10.1021/acs.est.6b00183.
  14. Luo, H., Li, Y., Zhao, Y., Xiang, Y., He, D., and Pan, X. (2020), "Effects of accelerated aging on characteristics, leaching, and toxicity of commercial lead chromate pigmented microplastics", Environ. Pollut., 257, 113475. https://doi.org/10.1016/j.envpol.2019.113475.
  15. Luo, H., Zhao, Y., Li, Y., Xiang, Y., He, D. and Pan, X. (2020), "Aging of microplastics affects their surface properties, thermal decomposition, additives leaching and interactions in simulated fluids", Sci. Total Environ., 714, 136862. https://doi.org/10.1016/j.scitotenv.2020.136862
  16. Ma, Y., Jin, S., Yokozeki, T., Ueda, M., Yang, Y., Elbadry, E.A., Hamada, H. and Sugahara, T. (2020), "Effect of hot water on the mechanical performance of unidirectional carbon fiber-reinforced nylon 6 composites", Compos. Sci. Technol., 200, 108426. https://doi.org/10.1016/j.compscitech.2020.108426.
  17. Mato, Y., Isobe, T., Takada, H., Kanehiro, H., Ohtake, C. and Kaminuma, T., (2001), "Plastic resin pellets as a transport medium for toxic chemicals in the marine environment", Environ. Sci. Technol., 35(2), 318-324. https://doi.org/10.1021/es0010498
  18. Montaudo, G., Montaudo, M.S., Puglisi, C. and Samperi, F. (1996), "Characterization of end groups in Nylon 6 by MALDI-TOF mass spectrometry", J. Polym. Sci. A, 34(3), 439-447. https://doi.org/10.1002/(SICI)1099-0518(199602)34:3<439::AID-POLA13>3.0.CO;2-Q.
  19. Qin, F., Du, J., Gao, J., Liu, G., Song, Y., Yang, A., Wang, H., Ding, Y. and Wang, Q. (2020), "Bibliometric Profile of Global Microplastics Research from 2004 to 2019", Int. J. Environ. Res. Public Health, 17(16), 5639. https://doi.org/10.3390/ijerph17165639.
  20. Rist, S., Almroth, B.C., Hartmann, N.B. and Karlsson, T.M. (2018), "A critical perspective on early communications concerning human health aspects of microplastics", Sci. Total Environ., 626, 720-726. https://doi.org/https://doi.org/10.1016/j.scitotenv.2018.01.092
  21. Shruti, V.C., Perez-Guevara, F. and Kutralam-Muniasamy, G. (2020), "Metro station free drinking water fountain- A potential "microplastics hotspot" for human consumption", Environ Pollut., 261, 114227. https://doi.org/10.1016/j.envpol.2020.114227.
  22. Wang, H., Zhou, H.W., Gui, L.L., Ji, H.W. and Zhang, X.C. (2014), "Analysis of effects of fiber orientation on Young's modulus for unidirectional fiber reinforced composites", Compos. B Eng., 56, 733-739. https://doi.org/10.1016/j.compositesb.2013.09.020.
  23. Wright, S.L. and Kelly, F.J. (2017), "Plastic and human health: A micro issue?", Environ. Sci. Technol., 51(12), 6634-6647. https://doi.org/10.1021/acs.est.7b00423.