Advances in nano research

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

A hybrid evaluation of information entropy meta-heuristic model and unascertained measurement theory for tennis motion tracking

  • Received : 2020.09.27
  • Accepted : 2021.12.26
  • Published : 2022.03.25
⟨ Previous Next ⟩

Abstract

In this research, the physical education training quality was investigated using the entropy model to compute variance associated with a random value (a strong tool). The entropy and undefined estimation principles are used to extract the greatest entropy of information dependent on the index system. In the study of tennis motion tracking from a dynamic viewpoint, such stages are utilized to improve the perception of the players' achievement (Lv et al. 2020). Six female tennis players served on the right side (50 cm from the T point). The initial flat serve from T point was the movement under consideration, and the entropy was utilized to weigh all indications. As a result, a multi-index measurement vector is stabilized, followed by the confidence level to determine the structural plane establishment range. As a result, the use of the unascertained measuring technique of information entropy showed an excellent approach to assessing athlete performance more accurately than traditional ways, enabling coaches and athletes to enhance their movements successfully.

Keywords

References

  1. Abedini, M. and Zhang, C. (2020), "Performance assessment of concrete and steel material models in ls-dyna for enhanced numerical simulation, a state of the art review", Arch. Comput. Method. E., 1-22. https://doi.org/10.1007/s11831-020-09483-5.
  2. Abedini, M., Zhang, C., Mehrmashhadi, J. and Akhlaghi, E. (2020), "Comparison of ALE, LBE and pressure time history methods to evaluate extreme loading effects in RC column", Structures, 28, 456-466. https://doi.org/10.1016/j.istruc.2020.08.084.
  3. Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A. and Shokrgozar, A. (2020), "Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives", Constr. Build. Mater., 262(30), 120034. https://doi.org/10.1016/j.conbuildmat.2020.120034.
  4. Alam, Z., Zhang, C. and Samali, B. (2020a), "Influence of seismic incident angle on response uncertainty and structural performance of tall asymmetric structure", Struct. Des. Tall Spec., 29(12), e1750. https://doi.org/10.1002/tal.1750.
  5. Alam, Z., Zhang, C. and Samali, B. (2020b), "The role of viscoelastic damping on retrofitting seismic performance of asymmetric reinforced concrete structures", Earthq. Eng. Eng. Vib., 19(1), 223-237. https://doi.org/10.1007/s11803-020-0558-x.
  6. Alipour, M., Torabi, M.A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., Habibi, M. and Hashemi, R. (2020), "Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels", Mech. Based Des. Struct., 48(5), 525-541. https://doi.org/10.1080/15397734.2019.1633343.
  7. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010), "Behavior of through beam connections composed of cfsst columns and steel beams by finite element studying", Adv. Mater. Res., 168-170, 2329-2333. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2329.
  8. Araujo, D., Davids, K., Bennett, S.J., Button, C. and Chapman, G. (2004), 19. Emergence of Sport Skills Under Constraints in Skill Acquisition in Sport: Research, Theory and Practice, Routledge, London, U.K.
  9. Assfalg, J., Bertini, M., Colombo, C. and Bimbo, A.D. (2002), "Semantic annotation of sports videos", IEEE MultiMedia, 9(2), 52-60. https://doi.org/10.1109/93.998060.
  10. Azimi, M., Mirjavadi, S.S., Shafiei, N. and Hamouda, A.M.S. (2016), "Thermo-mechanical vibration of rotating axially functionally graded nonlocal Timoshenko beam", Appl. Phys. A, 123(1), 104. https://doi.org/10.1007/s00339-016-0712-5.
  11. Azimi, M., Mirjavadi, S.S., Shafiei, N., Hamouda, A.M.S. and Davari, E. (2018), "Vibration of rotating functionally graded Timoshenko nano-beams with nonlinear thermal distribution", Mech. Adv. Mater. Struct., 25(6), 467-480. https://doi.org/10.1080/15376494.2017.1285455.
  12. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Semi-numerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comput., 1-26. https://doi.org/10.1007/s00366-020-01191-9.
  13. Barron, J.L., Fleet, D.J., Beauchemin, S.S. and Burkitt, T. (1992), "Performance of optical flow techniques", Syst. Exp., 12, 43-77. https://doi.org/10.1007/BF01420984.
  14. Bennett, N., Burridge, R. and Saito, N. (1999), "A method to detect and characterize ellipses using the Hough transform", IEEE T. Pattern Anal., 21(7), 652-657. https://doi.org/10.1109/34.777377.
  15. Bernstein, N. (1967), The Co-ordination and Regulation of Movements, PergamonPress Ltd., Oxford, U.K.
  16. Bradski, G.R. (1998), "Real time face and object tracking as a component of a perceptual user interface", Proceedings Fourth IEEE Workshop on Applications of Computer Vision. WACV'98 (Cat. No. 98EX201), Newjersey, U.S.A., August.
  17. Cao, B., Gu, Y., Lv, Z., Yang, S., Zhao, J. and Li, Y. (2021a), "RFID reader anticollision based on distributed parallel particle swarm optimization", IEEE Internet Thing J., 8(5), 3099-3107. https://doi.org/10.1109/JIOT.2020.3033473.
  18. Cao, B., Li, M., Liu, X., Zhao, J., Cao, W. and Lv, Z. (2021b), "Many-objective deployment optimization for a drone-assisted camera network", IEEE T. Netw. Sci. Eng., 8(4), 2756-2764. https://doi.org/10.1109/TNSE.2021.3057915.
  19. Cao, B., Zhang, W., Wang, X., Zhao, J., Gu, Y. and Zhang, Y. (2021c), "A memetic algorithm based on two_Arch2 for multi-depot heterogeneous-vehicle capacitated arc routing problem", Swarm Evol. Comput., 63, 100864. https://doi.org/10.1016/j.swevo.2021.100864.
  20. Chen, H., Qiao, H., Xu, L., Feng, Q. and Cai, K. (2019), "A fuzzy optimization strategy for the implementation of RBF LSSVR model in vis-NIR analysis of pomelo maturity", IEEE T. Ind. Inform., 15(11), 5971-5979. https://doi.org/10.1109/TII.2019.2933582.
  21. Chen, Z., Wang, J., Ma, K., Huang, X. and Wang, T. (2020), "Fuzzy adaptive two-bits-triggered control for nonlinear uncertain system with input saturation and output constraint", Int. J. Adapt. Control., 34(4), 543-559. https://doi.org/10.1002/acs.3098.
  22. Cheshmeh, E., Karbon, M., Eyvazian, A., Jung, D.W., Habibi, M. and Safarpour, M. (2020), "Buckling and vibration analysis of FG-CNTRC plate subjected to thermo-mechanical load based on higher order shear deformation theory", Mech. Based Des. Struct., 1-24. https://doi.org/10.1080/15397734.2020.1744005.
  23. D'Orazio, T., Ancona, N., Cicirelli, G. and Nitti, M. (2002), "A ball detection algorithm for real soccer image sequences", Proceedings of the 2002 International Conference on Pattern Recognition, Quebec City, Canada, August.
  24. Dai, Z.C., Jiang, Z.Y., Zhang, L. and Habibi, M. (2021a), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano. Res., 10(2), 175-189. https://doi.org/10.12989/anr.2021.10.2.175.
  25. Dai, Z.C., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021b), "On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses", Compos. Struct., 263, 113599. https://doi.org/10.1016/j.compstruct.2021.113599.
  26. Das, M. and Anand, J. (1995). "Robust edge detection in noisy images using an adaptive stochastic gradient technique", Proceedings of the International Conference on Image Processing, Wasington D.C., U.S.A.
  27. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2021), "Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method", Steel Compos. Struct., 40(6), 853-868. https://doi.org/10.12989/scs.2021.40.6.853.
  28. Ding, L., Huang, L., Li, S., Gao, H., Deng, H., Li, Y. and Liu, G. (2020), "Definition and application of variable resistance coefficient for wheeled mobile robots on deformable terrain", IEEE T. Robot., 36(3), 894-909. https://doi.org/10.1109/TRO.2020.2981822.
  29. Eaton, R. and Scassellati, B. (2000), "ViSIT: Visual surveillance and interaction tracking", Social Robotics Lab. Yale Univ., 6511, New Haven, Connecticut, U.S.A.
  30. Ebrahimi, F., Mohammadi, K., Barouti, M.M. and Habibi, M. (2019), "Wave propagation analysis of a spinning porous graphene nanoplatelet-reinforced nanoshell", Wave. Random Complex., 1-27. https://doi.org/10.1080/17455030.2019.1694729.
  31. Ebrahimi, F. and Shafiei, N. (2016), "Application of Eringen's nonlocal elasticity theory for vibration analysis of rotating functionally graded nanobeams", Smart Struct. Syst. 17(5), 837-857. https://doi.org/10.12989/sss.2016.17.5.837.
  32. Ebrahimi, F. and Shafiei, N. (2017), "Influence of initial shear stress on the vibration behavior of single-layered graphene sheets embedded in an elastic medium based on Reddy's higher-order shear deformation plate theory", Mech. Adv. Mater. Struct., 24(9), 761-772. https://doi.org/10.1080/15376494.2016.1196781.
  33. Ebrahimi, F., Shafiei, N., Kazemi, M. and Mousavi Abdollahi, S.M. (2017), "Thermo-mechanical vibration analysis of rotating nonlocal nanoplates applying generalized differential quadrature method", Mech. Adv. Mater. Struct., 24(15), 1257-1273. https://doi.org/10.1080/15376494.2016.1227499.
  34. Ehyaei, J., Akbarshahi, A. and Shafiei, N.J.A.i.n.r. (2017), "Influence of porosity and axial preload on vibration behavior of rotating FG nanobeam", Adv. Nano. Res., 5(2), 141-169. https://doi.org/10.12989/anr.2017.5.2.141.
  35. Fazaeli, A., Habibi, M. and Ekrami, A.A. (2016), "Experimental and finite element comparison of mechanical properties and formability of dual phase steel and ferrite-pearlite steel with the same chemical composition", Metall. Eng., 19(2), 84-93. https://doi.org/10.22076/ME.2017.41458.1064.
  36. Feng, S., Lu, H., Tian, P., Xue, Y., Lu, J., Tang, M. and Feng, W. (2020), "Analysis of microplastics in a remote region of the Tibetan Plateau: Implications for natural environmental response to human activities", Sci. Total Environ., 739, 140087. https://doi.org/10.1016/j.scitotenv.2020.140087.
  37. Friedman, N. and Russell, S. (2013), "Image segmentation in video sequences: A probabilistic approach", arXiv:1302.1539. https://arxiv.org/abs/1302.1539.
  38. Ghabussi, A., Habibi, M., NoormohammadiArani, O., Shavalipour, A., Moayedi, H. and Safarpour, H. (2021), "Frequency characteristics of a viscoelastic graphene nanoplatelet-reinforced composite circular microplate", J. Vib. Control., 27(1-2), 101-118. https://doi.org/10.1177/1077546320923930.
  39. Ghadiri, M., Hosseini, S.H.S. and Shafiei, N. (2016a), "A power series for vibration of a rotating nanobeam with considering thermal effect", Mech. Adv. Mater. Struct., 23(12), 1414-1420. https://doi.org/10.1080/15376494.2015.1091527.
  40. Ghadiri, M., Shafiei, N. and Akbarshahi, A. (2016b), "Influence of thermal and surface effects on vibration behavior of nonlocal rotating Timoshenko nanobeam", Appl. Phys. A, 122(7), 673. https://doi.org/10.1007/s00339-016-0196-3.
  41. Ghadiri, M., Shafiei, N. and Alireza Mousavi, S. (2016c), "Vibration analysis of a rotating functionally graded tapered microbeam based on the modified couple stress theory by DQEM", Appl. Phys. A, 122(9), 837. https://doi.org/10.1007/s00339-016-0364-5.
  42. Ghadiri, M. and Shafiei, N. (2016a), "Nonlinear bending vibration of a rotating nanobeam based on nonlocal Eringen's theory using differential quadrature method", Microsyst. Technol., 22(12), 2853-2867. https://doi.org/10.1007/s00542-015-2662-9.
  43. Ghadiri, M. and Shafiei, N. (2016b), "Vibration analysis of a nano-turbine blade based on Eringen nonlocal elasticity applying the differential quadrature method", J. Vib. Control., 23(19), 3247-3265. https://doi.org/10.1177/1077546315627723.
  44. Ghadiri, M. and Shafiei, N. (2016c), "Vibration analysis of rotating functionally graded Timoshenko microbeam based on modified couple stress theory under different temperature distributions", Acta Astronaut., 121, 221-240. https://doi.org/10.1016/j.actaastro.2016.01.003.
  45. Ghadiri, M., Mahinzare, M., Shafiei, N. and Ghorbani, K. (2017a), "On size-dependent thermal buckling and free vibration of circular FG Microplates in thermal environments", Microsyst. Technol., 23(10), 4989-5001. https://doi.org/10.1007/s00542-017-3308-x.
  46. Ghadiri, M., Shafiei, N. and Alavi, H. (2017b), "Thermo-mechanical vibration of orthotropic cantilever and propped cantilever nanoplate using generalized differential quadrature method", Mech. Adv. Mater. Struct., 24(8), 636-646. https://doi.org/10.1080/15376494.2016.1196770.
  47. Ghadiri, M., Shafiei, N. and Alavi, H. (2017c), "Vibration analysis of a rotating nanoplate using nonlocal elasticity theory", J. Solid Mech., 9(2), 319-337.
  48. Ghadiri, M., Shafiei, N. and Babaei, R. (2017d), "Vibration of a rotary FG plate with consideration of thermal and Coriolis effects", Steel Compos. Struct. 25(2), 197-207. https://doi.org/10.12989/SCS.2017.25.2.197.
  49. Ghadiri, M., Shafiei, N. and Safarpour, H. (2017e), "Influence of surface effects on vibration behavior of a rotary functionally graded nanobeam based on Eringen's nonlocal elasticity", Microsyst. Technol., 23(4), 1045-1065. https://doi.org/10.1007/s00542-016-2822-6.
  50. Ghadiri, M., Shafiei, N., Salekdeh, S.H., Mottaghi, P. and Mirzaie, T. (2016d), "Investigation of the dental implant geometry effect on stress distribution at dental implant-bone interface", J. Brazil. Soc. Mech. Sci. Eng., 38(2), 335-343. https://doi.org/10.1007/s40430-015-0472-8.
  51. Ghazanfari, A., Assempour, A., Habibi, M. and Hashemi, R. (2016), "Investigation on the effective range of the through thickness shear stress on forming limit diagram using a modified Marciniak-Kuczynski model", Modares Mech. Eng., 16(1), 137-143.
  52. Grimson, W.E.L., Stauffer, C., Romano, R. and Lee, L. (1998), "Using adaptive tracking to classify and monitor activities in a site", Proceedings of the 1998 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (Cat. No. 98CB36231), Californai, U.S.A., August.
  53. Guan, Z., Xing, Q., Xu, M., Yang, R., Liu, T. and Wang, Z. (2019), "MFQE 2.0: A new approach for multi-frame quality enhancement on compressed video", IEEE T Pattern Anal., 43(3), 949-963. https://doi.org/10.1109/TPAMI.2019.2944806.
  54. Guo, Y., Mi, H.L. and Habibi, M. (2021), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Syst. Signal. Pr., 157, 107723. https://doi.org/10.1016/j.ymssp.2021.107723.
  55. Gwiasda, K.E., Allender-Hagedorn, S., Chang, Y.Y., Eun, J.Y., Marino, P., Swales, J.M., Vanderbeke, D., Kamps, S., Bergmann, L.S. and Collins, A. (2000), "Bibliography: Relations of science to literature and the arts 1998", Configurations, 8(3), 429-562. https://doi.org/10.1353/con.2000.0019.
  56. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Perform., 25(2), 382-389. https://doi.org/10.1007/s11665-016-1882-1.
  57. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(8), 625-636. https://doi.org/10.1177/1464420716642258.
  58. Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081.
  59. Han, M., Hua, W., Xu, W. and Gong, Y. (2002), "An integrated baseball digest system using maximum entropy method", Proceedings of the 10th ACM International Conference on Multimedia, Juan-les-Pins, France, December.
  60. Hashemi, H.R., Alizadeh, A., Oyarhossein, M.A., Shavalipour, A., Makkiabadi, M. and Habibi, M. (2019), "Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure", Wave. Random Complex., 1-27. https://doi.org/10.1080/17455030.2019.1662968.
  61. Hausdorff, J.M., Purdon, P.L., Peng, C.-K., Ladin, Z., Wei, J.Y. and Goldberger, A.L. (1996), "Fractal dynamics of human gait: stability of long-range correlations in stride interval fluctuations", J. Appl. Phys., 80(5), 1448-1457. https://doi.org/10.1152/jappl.1996.80.5.1448.
  62. He, L., Chen, Y., Zhao, H., Tian, P., Xue, Y. and Chen, L. (2018), "Game-based analysis of energy-water nexus for identifying environmental impacts during Shale gas operations under stochastic input", Sci. Total Environ., 627, 1585-1601. https://doi.org/10.1016/j.scitotenv.2018.02.004.
  63. He, S., Guo, F. and Zou, Q. (2020), "MRMD2. 0: A python tool for machine learning with feature ranking and reduction", Curr. Bioinform., 15(10), 1213-1221. https://doi.org/10.2174/1574893615999200503030350.
  64. He, L., Shao, F. and Ren, L. (2021a), "Sustainability appraisal of desired contaminated groundwater remediation strategies: an information-entropy-based stochastic multi-criteria preference model", Environ. Develop. Sust., 23(2), 1759-1779. https://doi.org/10.1007/s10668-020-00650-z.
  65. He, X., Ding, J., Habibi, M., Safarpour, H. and Safarpour, M. (2021b), "Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate", Thin Wall. Struct., 166, 108019. https://doi.org/10.1016/j.tws.2021.108019.
  66. Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium", Struct. Eng. Mech., 66(6), 737-748. https://doi.org/10.12989/sem.2018.66.6.737.
  67. Hong, Y. and Bartlett, R. (2008), Routledge Handbook of Biomechanics and Human Movement Science, Routledge, London, U.K.
  68. Hosseini, S., Habibi, M. and Assempour, A. (2018), "Experimental and numerical determination of forming limit diagram of steel-copper two-layer sheet considering the interface between the layers", Modares Mech. Eng., 18(6), 174-181.
  69. Hosseini, S.A. and Toghroli, A. (2021), "Effect of mixing Nano-silica and Perlite with pervious concrete for nitrate removal from the contaminated water", Adv. Concrete Constr., 11(6), 531-544. https://doi.org/10.12989/acc.2021.11.6.531.
  70. Hou, F.X., Wu, S.B., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comput., 1-19. https://doi.org/10.1007/s00366-021-01456-x.
  71. Huang, X., Hao, H., Oslub, K., Habibi, M. and Tounsi, A. (2021a), "Dynamic stability/instability simulation of the rotary size-dependent functionally graded microsystem", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01399-3.
  72. Huang, X.P., Zhang, Y.M., Moradi, Z. and Shafiei, N. (2021b), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform micro-tube", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-021-01395-7.
  73. Huang, X.P., Zhu, Y.F., Vafaei, P., Moradi, Z. and Davoudi, M. (2021c), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., 1-13. https://doi.org/10.1007/s00366-021-01320-y.
  74. Huang, Y., Wang, J., Wang, F. and He, B. (2021d), "Event-triggered adaptive finite-time tracking control for full state constraints nonlinear systems with parameter uncertainties and given transient performance", ISA Transact., 108, 131-143. https://doi.org/10.1016/j.isatra.2020.08.022.
  75. Huo, J., Zhang, G., Ghabussi, A. and Habibi, M. (2021), "Bending analysis of FG-GPLRC axisymmetric circular/annular sector plates by considering elastic foundation and horizontal friction force using 3D-poroelasticity theory", Compos. Struct., 276, 114438. https://doi.org/10.1016/j.compstruct.2021.114438.
  76. Intille, S.S., Davis, J.W. and Bobick, A.F. (1997), "Real-time closed-world tracking", Proceedings of IEEE Computer Society Conference on Computer Vision and Pattern Recognition, Puerto Rico, U.S.A., June.
  77. Ishii, I. and Ishikawa, M. (1999), "Self-windowing for high speed vision", Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No. 99CH36288C), Michigan, U.S.A., August.
  78. Ishikawa, M. (1998), "Super-parallel super-high-speed visual information system: General-purpose vision chip and grayscale photoelectron vision system", Proceedings of Applied Physics, 67, 33-38. https://doi.org/10.1007/s003400050471
  79. Jiang, Q., Shao, F., Gao, W., Chen, Z., Jiang, G. and Ho, Y.-S. (2018), "Unified no-reference quality assessment of singly and multiply distorted stereoscopic images", IEEE T. Image Proc., 28(4), 1866-1881. https://doi.org/10.1109/TIP.2018.2881828.
  80. Jiao, J., Ghoreishi, S.M., Moradi, Z. and Oslub, K. (2021), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magneto-electro-elastic nanosystem", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01391-x
  81. Junkun, Y., Wenqiang, P., Shenghua, Z., Hongwei, L. and Greco, M.S. (2020), "Optimal resource allocation for asynchronous multiple target tracking in heterogeneous radar network", IEEE T. Signal Proc., 68, 4055-4068. https://doi.org/10.1109/TSP.2020.3007313.
  82. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-019-00780-7.
  83. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M.M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067.
  84. Kordestani, H. and Zhang, C. (2020), "Direct use of the savitzky-golay filter to develop an output-only trend line-based damage detection method", Sensors, 20(7), 1983. https://doi.org/10.3390/s20071983.
  85. Kordestani, H., Zhang, C. and Shadabfar, M. (2020), "Beam damage detection under a moving load using random decrement technique and Savitzky-Golay Filter", Sensors, 20(1), 243. https://doi.org/10.3390/s20010243.
  86. Kudo, K. and Ohtsuki, T. (2008), "Adaptive variability in skilled human movements", Transact. Japan Soc. Artif. Intell., 23(3), 151-162. https://doi.org/10.1527/tjsai.23.151.
  87. Lam, M., Chan, M., Leung, J., Wong, R., Hang, C. and Jin, J. (2003), "Computer-assisted off-side detection in soccer matches", Proceedings of Technical Report, School of Information Technologies, University of Sydney, Sydney, Australia.
  88. Li, D.Y., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019a), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct Syst. 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207.
  89. Li, X., Feng, Y., Liu, B., Yi, D., Yang, X., Zhang, W., Chen, G., Liu, Y. and Bai, P. (2019b), "Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding", J. Alloy. Compd., 788 485-494. https://doi.org/10.1016/j.jallcom.2019.02.223.
  90. Li, B.H., Liu, Y., Zhang, A.M., Wang, W.H. and Wan, S. (2020a), "A survey on blocking technology of entity resolution", J. Comput. Sci. Technol., 35(4), 769-793. https://doi.org/10.1007/s11390-020-0350-4.
  91. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2020b), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01166-w.
  92. Li, B., Yang, J., Yang, Y., Li, C. and Zhang, Y. (2021), "Sign language/gesture recognition based on cumulative distribution density features using UWB radar", IEEE T. Instrum. Meas., 70 1-13. https://doi.org/10.1109/TIM.2021.3092072.
  93. Liu, T., Zhang, H.J. and Qi, F. (2003), "A novel video key-frame-extraction algorithm based on perceived motion energy model", IEEE T Circ. Syst. Vid., 13(10), 1006-1013. https://doi.org/10.1109/TCSVT.2003.816521.
  94. Liu, S., Chan, F.T. and Ran, W. (2016), "Decision making for the selection of cloud vendor: An improved approach under group decision-making with integrated weights and objective/subjective attributes", Expert Syst. Appl., 55, 37-47. https://doi.org/10.1016/j.eswa.2016.01.059.
  95. Liu, L. and Liu, S. (2020), "Integrated production and distribution problem of perishable products with a minimum total order weighted delivery time", Mathematics, 8(2), 146. https://doi.org/10.3390/math8020146.
  96. Liu, Q., Song, Z., Han, H., Donkor, S., Jiang, L., Wang, W. and Chu, H. (2020a), "A novel green reinforcement corrosion inhibitor extracted from waste Platanus acerifolia leaves", Constr. Build. Mater., 260, 119695. https://doi.org/10.1016/j.conbuildmat.2020.119695.
  97. Liu, S., Yu, W., Chan, F.T. and Niu, B. (2020b), "A variable weight-based hybrid approach for multi-attribute group decision making under interval-valued intuitionistic fuzzy sets", Int. J. Intell. Syst., 36(2), 1015-1052. https://doi.org/10.1002/int.22329.
  98. Liu, Z., Su, S.L., Xi, D.R. and Habibi, M. (2020c), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Based Des. Struct., 1-26. https://doi.org/10.1080/15397734.2020.1784201.
  99. Liu, Z.F., Wu, X.Y., Yu, M. and Habibi, M. (2020d), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under Thermo-mechanical loadings", Mech. Based Des. Struct., 1-25. https://doi.org/10.1080/15397734.2020.1815544.
  100. Liu, C., Wang, F., Deng, X., Pang, S., Liu, J., Wu, Y. and Xu, Z. (2021a), "Hailstone-induced dynamic responses of pretensioned umbrella membrane structure", Adv. Struct. Eng., 24(1), 3-16. https://doi.org/10.1177/1369433220940149.
  101. Liu, F., Zhang, G. and Lu, J. (2021b), "Multisource heterogeneous unsupervised domain adaptation via fuzzy relation neural networks", IEEE T. Fuzzy Syst., 29(11), 3308-3322. https://doi.org/10.1109/TFUZZ.2020.3018191.
  102. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021c), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01316-8.
  103. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M.O. and Issakhov, A. (2021d), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-021-01419-2.
  104. Liu, R., Wang, X., Lu, H., Wu, Z., Fan, Q., Li, S. and Jin, X. (2021e), "SCCGAN: Style and characters inpainting based on CGAN", Mobile Netw. Appl., 26(1), 3-12. https://doi.org/10.1007/s11036-020-01717-x.
  105. Liu, Y., Wang, W.Q., He, T., Moradi, Z. and Benitez, M.L.A. (2021f), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-021-01454-z.
  106. Long, Q., Wu, C. and Wang, X. (2015), "A system of nonsmooth equations solver based upon subgradient method", Appl. Math. Comput., 251, 284-299. https://doi.org/10.1016/j.amc.2014.11.064.
  107. Lucas, B.D. and Kanade, T. (1981), "An iterative image registration technique with an application to stereo vision", Proceedings of the 7th Coference on Artificial Intelligence, Vancuver, Canadan August.
  108. Lv, X., Li, N., Xu, X. and Yang, Y. (2020), "Understanding the emergence and development of online travel agencies: A dynamic evaluation and simulation approach", Internet Res., 30(6), 1783-1810. https://doi.org/10.1108/INTR-11-2019-0464.
  109. Lv, Z. and Qiao, L. (2020), "Deep belief network and linear perceptron based cognitive computing for collaborative robots", Appl. Soft Comput., 92, 106300. https://doi.org/10.1016/j.asoc.2020.106300.
  110. Lv, Z., Qiao, L., Singh, A.K. and Wang, Q. (2021), "Fine-grained visual computing based on deep learning", 17(1s), 1-19. https://doi.org/10.1145/3418215.
  111. Ma, H.J. and Xu, L.X. (2020), "Decentralized adaptive fault-tolerant control for a class of strong interconnected nonlinear systems via graph theory", IEEE T. Autom. Contr., 66(7), 3227-3234. https://doi.org/10.1109/TAC.2020.3014292.
  112. Ma, H.J., Yang, G.H. and Chen, T. (2020), "Event-triggered optimal dynamic formation of heterogeneous affine nonlinear multi-agent systems", IEEE T. Autom. Contr., 66(2), 497-512. https://doi.org/10.1109/TAC.2020.2983108.
  113. Ma, L.H., Liu, X.L. and Moradi, Z. (2021), "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng Comput., 1-25. https://doi.org/10.1007/s00366-020-01210-9.
  114. Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M.M., Baharom, S. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng Mech. 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471.
  115. Mehrabi, P., Shariati, M., Kabirifar, K., Jarrah, M., Rasekh, H., Trung, N.T., Shariati, A. and Jahandari, S. (2021), "Effect of pumice powder and nano-clay on the strength and permeability of fiber-reinforced pervious concrete incorporating recycled concrete aggregate", Constr. Build. Mater., 287, 122652. https://doi.org/10.1016/j.conbuildmat.2021.122652.
  116. Mi, C., Cao, L., Zhang, Z., Feng, Y., Yao, L. and Wu, Y. (2020), "A port container code recognition algorithm under natural conditions", J. Coastal Res., 103(SI), 822-829. https://doi.org/10.2112/SI103-170.1.
  117. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A, 531, 121169. https://doi.org/10.1016/j.physa.2019.121169.
  118. Mirjavadi, S.S., Afshari, B.M., Shafiei, N., Hamouda, A., Kazemi, M. and Structures, C. (2017a), "Thermal vibration of two-dimensional functionally graded (2D-FG) porous Timoshenko nanobeams", Steel Compos. Struct., 25(4), 415-426. https://doi.org/10.12989/scs.2017.25.4.415.
  119. Mirjavadi, S.S., Matin, A., Shafiei, N., Rabby, S. and Mohasel Afshari, B. (2017b), "Thermal buckling behavior of two-dimensional imperfect functionally graded microscale-tapered porous beam", J. Therm. Stress., 40(10), 1201-1214. https://doi.org/10.1080/01495739.2017.1332962.
  120. Mirjavadi, S.S., Mohasel Afshari, B., Shafiei, N., Rabby, S. and Kazemi, M. (2017c), "Effect of temperature and porosity on the vibration behavior of two-dimensional functionally graded micro-scale Timoshenko beam", J. Vib. Control., 24(18), 4211-4225. https://doi.org/10.1177/1077546317721871.
  121. Mirjavadi, S.S., Rabby, S., Shafiei, N., Afshari, B.M. and Kazemi, M. (2017d), "On size-dependent free vibration and thermal buckling of axially functionally graded nanobeams in thermal environment", Appl. Phys. A, 123(5), 315. https://doi.org/10.1007/s00339-017-0918-1.
  122. Moayedi, H., Aliakbarlou, H., Jebeli, M., Noormohammadiarani, O., Habibi, M., Safarpour, H. and Foong, L. (2020a), "Thermal buckling responses of a graphene reinforced composite micropanel structure", Int. J. Appl. Mech., 12(01), 2050010. https://doi.org/10.1142/S1758825120500106.
  123. Moayedi, H., Darabi, R., Ghabussi, A., Habibi, M. and Foong, L.K. (2020b), "Weld orientation effects on the formability of tailor welded thin steel sheets", Thin Wall. Struct., 149, 106669. https://doi.org/10.1016/j.tws.2020.106669.
  124. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013a), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853.
  125. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2013b), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833.
  126. Mohammadhassani, M., Nezamabadi-pour, H., Suhatril, M. and Shariati, M. (2014), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785.
  127. Mojtaba, D. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050. https://doi.org/10.5897/ijps11.1585.
  128. Najaafi, N., Jamali, M., Habibi, M., Sadeghi, S., Jung, D.W. and Nabipour, N. (2021), "Dynamic instability responses of the substructure living biological cells in the cytoplasm environment using stress-strain size-dependent theory", J. Biomol. Struct. Dyn., 39(7), 2543-2554. https://doi.org/10.1080/07391102.2020.1751297.
  129. Ni, T., Chang, H., Song, T., Xu, Q., Huang, Z., Liang, H., Yan, A. and Wen, X. (2019a), "Non-intrusive online distributed pulse shrinking-based interconnect testing in 2.5 D IC", IEEE T. Circ. Syst II, 67(11), 2657-2661. https://doi.org/10.1109/TCSII.2019.2962824.
  130. Ni, T., Yao, Y., Chang, H., Lu, L., Liang, H., Yan, A., Huang, Z. and Wen, X. (2019b), "LCHR-TSV: Novel low cost and highly repairable honeycomb-based TSV redundancy architecture for clustered faults", IEEE T. Comput. Aid. D., 39(10), 2938-2951. https://doi.org/10.1109/TCAD.2019.2946243.
  131. Niu, Z., Zhang, B., Wang, J., Liu, K., Chen, Z., Yang, K., Zhou, Z., Fan, Y., Zhang, Y. and Ji, D. (2020), "The research on 220GHz multicarrier high-speed communication system", China Commun., 17(3), 131-139. https://doi.org/10.23919/JCC.2020.03.011.
  132. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Aliabad, M.D., Marto, A., Mu'azu, M., Ghanbari, E., Mandizadeh, M.B., Shariati, A. and Khorami, M. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425.
  133. Oyarhossein, M.A., Alizadeh, A.A., Habibi, M., Makkiabadi, M., Daman, M., Safarpour, H. and Jung, D.W. (2020), "Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites micro-tubes", Sci. Rep., 10(1), 1-19. https://doi.org/10.1038/s41598-020-61855-w.
  134. Pan, D., Xia, X.X., Zhou, H., Jin, S.Q., Lu, Y.Y., Liu, H., Gao, M.L. and Jin, Z.B. (2020), "COCO enhances the efficiency of photoreceptor precursor differentiation in early human embryonic stem cell-derived retinal organoids", Stem Cell Res. Therapy, 11(1), 1-12. https://doi.org/10.1186/s13287-020-01883-5.
  135. Peng, D.P., Chen, S., Darabi, R., Ghabussi, A. and Habibi, M. (2021), "Prediction of the bending and out-of-plane loading effects on formability response of the steel sheets", Arch. Civil Mech. Eng., 21(2), 1-13. https://doi.org/10.1007/s43452-021-00227-1.
  136. Pingali, G., Opalach, A. and Jean, Y. (2000), "Ball tracking and virtual replays for innovative tennis broadcasts", Proceedings 15th International Conference on Pattern Recognition, ICPR2-000, Barcelona, Spain, August.
  137. Post, A., Daffertshofer, A. and Beek, P.J. (2000), "Principal components in three-ball cascade juggling", Biol. Cybernet., 82(2), 143-152. https://doi.org/10.1007/PL00007966.
  138. Ran, W., Liu, S. and Zhang, Z. (2020), "A polling-based dynamic order-picking system considering priority orders", Complexity, 2020. https://doi.org/10.1155/2020/4595316.
  139. Reid, M., Morgan, S. and Whiteside, D. (2016), "Matchplay characteristics of Grand Slam tennis: Implications for training and conditioning", J. Sport Sci., 34(19), 1791-1798. https://doi.org/10.1080/02640414.2016.1139161.
  140. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., 22(4), 413-424. http://doi.org/10.12989/sss.2018.22.4.413.
  141. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Bin Baharom, S., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength", Steel Compos. Struct., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679.
  142. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A, 550, 124046. https://doi.org/10.1016/j.physa.2019.124046.
  143. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., 30(5), 417-432. https://doi.org/10.12989/scs.2019.30.5.417.
  144. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Azar, V.M., Toghroli, A., Safa, M., Mohamad, E.T., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335.
  145. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016a), "Comparison of modeling of the rotating tapered axially functionally graded Timoshenko and Euler-Bernoulli microbeams", Physica E, 83, 74-87. https://doi.org/10.1016/j.physe.2016.04.011.
  146. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016b), "Nonlinear vibration behavior of a rotating nanobeam under thermal stress using Eringen's nonlocal elasticity and DQM", Appl. Phys A, 122(8), 728. https://doi.org/10.1007/s00339-016-0245-y.
  147. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016c), "Nonlinear vibration of axially functionally graded tapered microbeams", Int. J. Eng. Sci., 102, 12-26. https://doi.org/10.1016/j.ijengsci.2016.02.007.
  148. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016d), "On size-dependent vibration of rotary axially functionally graded microbeam", Int. J. Eng. Sci., 101, 29-44. https://doi.org/10.1016/j.ijengsci.2015.12.008.
  149. Shafiei, N., Kazemi, M., Safi, M. and Ghadiri, M. (2016e), "Nonlinear vibration of axially functionally graded non-uniform nanobeams", Int. J. Eng. Sci., 106, 77-94. https://doi.org/10.1016/j.ijengsci.2016.05.009.
  150. Shafiei, N., Mousavi, A. and Ghadiri, M. (2016f), "On size-dependent nonlinear vibration of porous and imperfect functionally graded tapered microbeams", Int. J. Eng. Sci., 106, 42-56. https://doi.org/10.1016/j.ijengsci.2016.05.007.
  151. Shafiei, N., Mousavi, A. and Ghadiri, M. (2016g), "Vibration behavior of a rotating non-uniform FG microbeam based on the modified couple stress theory and GDQEM", Compos. Struct., 149, 157-169. https://doi.org/10.1016/j.compstruct.2016.04.024.
  152. Shafiei, N., Ghadiri, M., Makvandi, H. and Hosseini, S.A. (2017a), "Vibration analysis of Nano-Rotor's Blade applying Eringen nonlocal elasticity and generalized differential quadrature method", Appl. Math. Model., 43, 191-206. https://doi.org/10.1016/j.apm.2016.10.061.
  153. Shafiei, N., Kazemi, M. and Fatahi, L. (2017b), "Transverse vibration of rotary tapered microbeam based on modified couple stress theory and generalized differential quadrature element method", Mech. Adv. Mater. Struct., 24(3), 240-252. https://doi.org/10.1080/15376494.2015.1128025.
  154. Shafiei, N., Mirjavadi, S.S., Afshari, B.M., Rabby, S. and Hamouda, A.M.S. (2017c), "Nonlinear thermal buckling of axially functionally graded micro and nanobeams", Compos. Struct., 168, 428-439. https://doi.org/10.1016/j.compstruct.2017.02.048.
  155. Shafiei, N., Mirjavadi, S.S., MohaselAfshari, B., Rabby, S. and Kazemi, M. (2017d), "Vibration of two-dimensional imperfect functionally graded (2D-FG) porous nano-/micro-beams", Computer Methods Appl. M., 322, 615-632. https://doi.org/10.1016/j.cma.2017.05.007.
  156. Shafiei, N. and Kazemi, M. (2017a), "Buckling analysis on the bi-dimensional functionally graded porous tapered nano-/micro-scale beams", Aerosp. Sci. Technol., 66, 1-11. https://doi.org/10.1016/j.ast.2017.02.019.
  157. Shafiei, N. and Kazemi, M. (2017b), "Nonlinear buckling of functionally graded nano-/micro-scaled porous beams", Compos. Struct., 178, 483-492. https://doi.org/10.1016/j.compstruct.2017.07.045.
  158. Shafiei, N. and She, G.L. (2018), "On vibration of functionally graded nano-tubes in the thermal environment", Int. J. Eng. Sci., 133, 84-98. https://doi.org/10.1016/j.ijengsci.2018.08.004.
  159. Shafiei, N., Ghadiri, M. and Mahinzare, M. (2019), "Flapwise bending vibration analysis of rotary tapered functionally graded nanobeam in thermal environment", Mech. Adv. Mater. Struct. 26(2), 139-155. https://doi.org/10.1080/15376494.2017.1365982.
  160. Shafiei, N., Hamisi, M. and Ghadiri, M. (2020), "Vibration analysis of rotary tapered axially functionally graded Timoshenko nanobeam in thermal environment", J. Solid Mech., 12(1), 16-32. https://doi.org/10.22034/JSM.2019.563759.12.
  161. Shahabi, S.E.M., Sulong, N.H.R., Shariati, M., Mohammadhassani, M. and Shah, S.N.R. (2016), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., 20(3), 651-669. https://doi.org/10.12989/scs.2016.20.3.651.
  162. Shao, Y.H., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng., 21(4), 1-29. https://doi.org/10.1007/s43452-021-00279-3.
  163. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011a), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+), Seoul, South Korea, September
  164. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2011b), "Behavior of channel shear connectors in normal and light weight aggregate concrete (Experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303.
  165. Shariati, M. (2008), "Assessment building using none-destructive test techniques (ultra sonic pulse velocity and schmidt rebound hammer)", Ph.D. Dissertation, Universiti Putra Malaysia, Selangor, Malaysia.
  166. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.T. and Salih, M.N.A. (2019a), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct. 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
  167. Shariati, M., Heyrati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N.A. and Poi-Ngian, S. (2019b), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553.
  168. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N.A., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019c), "Application of a hybrid artificial neural network-particle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534.
  169. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., Bahadori, A., Shariati, A., Trung, N.T., Salih, M.N.A. and PoiNgian, S. (2019d), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319.
  170. Shariati, M., Rafie, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Mehrabi, P., Shariat, A., Trung, N.T., Salih, M.N.A. and Poi-Ngian, S. (2019e), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concr. Constr., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225.
  171. Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019f), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427.
  172. Shariati, A., Jung, D.W., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020a), "On the vibrations and stability of moving viscoelastic axially functionally graded nanobeams", Materials, 13(7), 1707. https://doi.org/10.3390/ma13071707.
  173. Shariati, A., Jung, D.W., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020b), "Stability and dynamics of viscoelastic moving rayleigh beams with an asymmetrical distribution of material parameters", Symmetry, 12(4), 586. https://doi.org/10.3390/sym12040586.
  174. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020c), "A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement", Eng Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0.
  175. Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020d), "Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)", Steel Compos. Struct., 34(1), 155-170. https://doi.org/10.12989/scs.2020.34.1.155.
  176. Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N. (2020e), "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 1-21. https://doi.org/10.1007/s00366-019-00930-x.
  177. Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020f), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct. 34(3), 377-391. https://doi.org/10.12989/scs.2020.34.3.377.
  178. Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2021a), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng Comput., 37(4), 3629-3648. https://doi.org/10.1007/s00366-020-01024-9.
  179. Shariati, M., Davoodnabi, S.M., Toghroli, A., Kong, Z.Y. and Shariati, A. (2021b), "Hybridization of metaheuristic algorithms with adaptive neuro-fuzzy inference system to predict load-slip behavior of angle shear connectors at elevated temperatures", Compos. Struct., 278, 114524. https://doi.org/10.1016/j.compstruct.2021.114524.
  180. Shi, K., Tang, Y., Liu, X. and Zhong, S. (2017), "Secondary delay-partition approach on robust performance analysis for uncertain time-varying Lurie nonlinear control system", Opt. Contr. Appl. Method., 38(6), 1208-1226. https://doi.org/10.1002/oca.2326.
  181. Shi, X.F., Li, J.Y. and Habibi, M. (2020), "On the statics and dynamics of an electro-thermo-mechanically porous GPLRC nanoshell conveying fluid flow", Mech. Based Des. Struct., 1-37. https://doi.org/10.1080/15397734.2020.1772088.
  182. Shivanian, E., Ghadiri, M. and Shafiei, N. (2017), "Influence of size effect on flapwise vibration behavior of rotary microbeam and its analysis through spectral meshless radial point interpolation", Appl. Phys. A, 123(5), 329. https://doi.org/10.1007/s00339-017-0955-9.
  183. Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. https://doi.org/10.5897/IJPS11.1225.
  184. Sinaei, H., Shariati, M., Abna, A.H., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Sci. Res. Essays, 7(21), 2002-2009. https://doi.org/10.5897/SRE11.1393.
  185. Stergiou, N. (2004), Innovative Analyses of Human Movement, Human Kinetics Publishers, Illinois, Canada.
  186. Sudhir, G., Lee, J.C.M. and Jain, A.K. (1998), "Automatic classification of tennis video for high-level content-based retrieval", Proceedings 1998 IEEE International Workshop on Content-Based Access of Image and Video Database, Bombay, India, January.
  187. Sun, J., Du, H., Chen, Z., Wang, L. and Shen, G. (2021), "MXene quantum dot within natural 3D watermelon peel matrix for biocompatible flexible sensing platform", Nano Res., 1-7. https://doi.org/10.1007/s12274-021-3967-x.
  188. Suthaharan, S., Kim, S.-W., Sathananthan, S., Lee, H.-K. and Rao, K. (1999), "Perceptually tuned video watermarking scheme using motion entropy masking", Proceedings of IEEE. IEEE Region 10 Conference. TENCON 99.'Multimedia Technology for Asia-Pacific Information Infrastructure' (Cat. No. 99CH37030), Jeju, Korea, September.
  189. Theobalt, C., Albrecht, I., Haber, J., Magnor, M. and Seidel, H.P. (2004), Pitching a Baseball: Tracking High-Speed Motion with Multi-Exposure Images in ACM SIGGRAPH 2004 Papers, Association for Computing Machinery, New York, U.S.A.
  190. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., 17(5), 623-639. http://doi.org/10.12989/scs.2014.17.5.623.
  191. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intell. Manuf., 29(8), 1793-1801. https://doi.org/10.1007/s10845-016-1217-y.
  192. Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland, September.
  193. Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst. 22(4), 433-440. https://doi.org/10.12989/sss.2018.22.4.433.
  194. Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., 24(3), 415-425. https://doi.org/10.12989/sss.2019.24.3.415.
  195. Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997.
  196. Wang, B., Zhang, B., Liu, X. and Zou, F. (2020a), "Novel infrared image enhancement optimization algorithm combined with DFOCS", Optik, 224, 165476. https://doi.org/10.1016/j.ijleo.2020.165476.
  197. Wang, J., Huang, Y., Wang, T., Zhang, C. and hui Liu, Y. (2020b), "Fuzzy finite-time stable compensation control for a building structural vibration system with actuator failures", Appl. Soft Comput., 93, 106372. https://doi.org/10.1016/j.asoc.2020.106372.
  198. Wang, J., Zhu, P., He, B., Deng, G., Zhang, C. and Huang, X. (2020c), "An adaptive neural sliding mode control with ESO for uncertain nonlinear systems", Int. J. Control Autom., 1-11. https://doi.org/10.1007/s12555-019-0972-x.
  199. Wang, L., Huang, Y., Xie, Y. and Du, Y. (2020d), "A new regularization method for dynamic load identification", Sci. Progress, 103(3), 0036850420931283. https://doi.org/10.1177/0036850420931283.
  200. Wang, Z.Y., Yu, S.Q., Xiao, Z.X. and Habibi, M. (2020e), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 1-14. https://doi.org/10.1080/15376494.2020.1824284.
  201. Wang, B., Zhang, B. and Liu, X. (2021), "An image encryption approach on the basis of a time delay chaotic system", Optik. 225, 165737. https://doi.org/10.1016/j.ijleo.2020.165737.
  202. Wu, J.H. and Habibi, M. (2021), "Dynamic simulation of the ultra-fast-rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput, 1-17. https://doi.org/10.1007/s00366-021-01396-6.
  203. Wu, Z., Li, C., Cao, J. and Ge, Y. (2020), "On scalability of association-rule-based recommendation: A unified distributed-computing framework", ACM T. Web, 14(3), 1-15. https://doi.org/10.1145/3398202.
  204. Wu, X., Zheng, W., Xia, X. and Lo, D. (2021), "Data quality matters: a case study on data label correctness for security bug report prediction", IEEE T. Softw. Eng., 1-1. https://doi.org/10.1109/TSE.2021.3063727.
  205. Xiaolong, D., Bai, W., Bin, W. and Shengqi, Y. (2012), "Modularity modeling and evaluation in community detecting of complex network based on information entropy", J. Comput. Res. Develop., 49(4), 725.
  206. Xie, J., Wen, D., Liang, L., Jia, Y., Gao, L. and Lei, J. (2018), "Evaluating the validity of current mainstream wearable devices in fitness tracking under various physical activities: Comparative study", JMIR mHealth uHealth, 6(4), e94. https://doi.org/10.2196/mhealth.9754.
  207. Xie, W., Zhang, R., Zeng, D., Shi, K. and Zhong, S. (2020), "Strictly dissipative stabilization of multiple-memory Markov jump systems with general transition rates: A novel event-triggered control strategy", Int. J. Robust Nonlin., 30(5), 1956-1978. https://doi.org/10.1002/rnc.4856.
  208. Xu, L., Paila, T., Hansmann, W. and Frank, M. (2003), "Intel open source computer vision library, version 3.1", Proceedings of the 26th Annual Conference on Local Computer Networks, LCN'01, Washington D.C., U.S.A. November.
  209. Xu, M., Li, C., Chen, Z., Wang, Z. and Guan, Z. (2018), "Assessing visual quality of omnidirectional videos", IEEE T. Circ. Syst. Vid., 29(12), 3516-3530. https://doi.org/10.1109/TCSVT.2018.2886277.
  210. Xu, M., Li, C., Zhang, S. and Le Callet, P. (2020), "State-of-the-art in 360 video/image processing: Perception, assessment and compression", IEEE J. Sel. Top. Signal Proc., 14(1), 5-26. https://doi.org/10.1109/JSTSP.2020.2966864.
  211. Xu, W.T., Pan, G.J., Moradi, Z. and Shafiei, N. (2021), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 275, 114395. https://doi.org/10.1016/j.compstruct.2021.114395.
  212. Yang, M. and Sowmya, A. (2015), "An underwater color image quality evaluation metric", IEEE T. Image Proc., 24(12), 6062-6071. https://doi.org/10.1109/TIP.2015.2491020.
  213. Yang, R., Xu, M., Liu, T., Wang, Z. and Guan, Z. (2018), "Enhancing quality for HEVC compressed videos", IEEE T. Circ. Syst. Vid., 29(7), 2039-2054. https://doi.org/10.1109/TCSVT.2018.2867568.
  214. Yazdani, M., Kabirifar, K., Frimpong, B.E., Shariati, M., Mirmozaffari, M. and Boskabadi, A. (2020), "Improving construction and demolition waste collection service in an urban area using a simheuristic approach: A case study in Sydney, Australia", J. Clean. Prod., 280, 124138. https://doi.org/10.1016/j.jclepro.2020.124138.
  215. Yow, D., Yeo, B.L., Yeung, M. and Liu, B. (1995), "Analysis and presentation of soccer highlights from digital video", Proceedings of the Second Asian Conference on Computer Vision (ACCV '95), Singapore, December.
  216. Yu, J., Fang, L., Cang, D., Zhu, L. and Bian, Z. (2012), "Evaluation of land eco-security in Wanjiang district base on entropy weight and matter element model", Transact. Chinese Soc. Agric. Eng., 28(5), 260-266. https://doi.org/10.3969/j.issn.1002-6819.2012.05.043
  217. Yu, X.M., Maalla, A. and Moradi, Z. (2022), "Electroelastic high-order computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory", Mech. Syst. Signal. Pr., 165, 108373. https://doi.org/10.1016/j.ymssp.2021.108373.
  218. Yue, H., Wang, H., Chen, H., Cai, K. and Jin, Y. (2020), "Automatic detection of feather defects using lie group and fuzzy fisher criterion for shuttlecock production", Mech. Syst. Signal. Pr., 141, 106690. https://doi.org/10.1016/j.ymssp.2020.106690.
  219. Zhang, C., Li, L. and Ou, J. (2010), "Swinging motion control of suspended structures: Principles and applications", Struct. Contr. Health Monit., 17(5), 549-562. https://doi.org/10.1002/stc.331.
  220. Zhang, Z., Kong, L., Zheng, L., Zhang, P., Qu, X., Liao, B. and Yu, Z. (2018), "Robustness analysis of a power-type varying-parameter recurrent neural network for solving time-varying qm and qp problems and applications", IEEE T. Syst. Man Cy., 50(12), 5106-5118. https://doi.org/10.1109/TSMC.2018.2866843.
  221. Zhang, H., Qiu, Z., Cao, J., Abdel-Aty, M. and Xiong, L. (2019), "Event-triggered synchronization for neutral-type semi-Markovian neural networks with partial mode-dependent time-varying delays", IEEE T Neural Networ., 31(11), 4437-4450. https://doi.org/10.1109/TNNLS.2019.2955287.
  222. Zhang, L., Chen, Z.X., Habibi, M., Ghabussi, A. and Alyousef, R. (2021a), "Low-velocity impact, resonance, and frequency responses of FG-GPLRC viscoelastic doubly curved panel", Compos. Struct., 269, 114000. https://doi.org/10.1016/j.compstruct.2021.114000.
  223. Zhang, X., Shamsodin, M., Wang, H., NoormohammadiArani, O., Khan, A.M., Habibi, M. and Al-Furjan, M. (2021b), "Dynamic information of the time-dependent tobullian biomolecular structure using a high-accuracy size-dependent theory", J. Biomol. Struct. Dyn., 39(9), 3128-3143. https://doi.org/10.1080/07391102.2020.1760939.
  224. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021c), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Wave. Random Complex., 1-24. https://doi.org/10.1080/17455030.2021.1948627.
  225. Zhao, J., Liu, J., Jiang, J. and Gao, F. (2020), "Efficient deployment with geometric analysis for mmWave UAV communications", IEEE Wirel. Commun., 9(7), 1115-1119. https://doi.org/10.1109/LWC.2020.2982637.
  226. Zhao, Y.N., Moradi, Z., Davoudi, M. and Zhuang, J.W. (2021), "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng Comput., 1-23. https://doi.org/10.1007/s00366-020-01242-1.
  227. Zhiyong, L., Xiang, W. and Nan, Z. (2012), An Evaluation Model for Synchronized Supply Chain Based on Entropy Weight and TOPSIS I, Springer, Berlin, Germany.
  228. Zhong, D. and Chang, S.F. (1997), "Spatio-temporal video search using the object based video representation", Proceedings of International Conference on Image Processing, California, U.S.A., August.
  229. Zhou, C.L., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv Nano Res., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295.
  230. Zhou, J. and Li, X.B. (2012), "Integrating unascertained measurement and information entropy theory to assess blastability of rock mass", J. Cent. South Univ., 19(7), 1953-1960. https://doi.org/10.1007/s11771-012-1231-y.
  231. Zhou, W., Yu, L., Zhou, Y., Qiu, W., Wu, M.W. and Luo, T. (2018), "Local and global feature learning for blind quality evaluation of screen content and natural scene images", IEEE T. Image Proc., 27(5), 2086-2095. https://doi.org/10.1109/TIP.2018.2794207.
  232. Zhu, L., Zhang, C., Guan, X., Uy, B., Sun, L. and Wang, B. (2018), "The multi-axial strength performance of composited structural BCW members subjected to shear forces", Steel Compos Struct., 27(1), 75-87. https://doi.org/10.12989/scs.2018.27.1.075.
  233. Zhu, Q. (2019), "Research on road traffic situation awareness system based on image big data", IEEE Intell. Syst., 35(1), 18-26. https://doi.org/10.1109/MIS.2019.2942836.
  234. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos Struct., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067.
  235. Zuo, C., Chen, Q., Gu, G., Feng, S., Feng, F., Li, R. and Shen, G. (2013), "High-speed three-dimensional shape measurement for dynamic scenes using bi-frequency tripolar pulse-width-modulation fringe projection", Opt. Laser Eng., 51(8), 953-960. https://doi.org/10.1016/j.optlaseng.2013.02.012.
  236. Zuo, C., Chen, Q., Tian, L., Waller, L. and Asundi, A. (2015), "Transport of intensity phase retrieval and computational imaging for partially coherent fields: The phase space perspective", Opt. Laser Eng., 71, 20-32. https://doi.org/10.1016/j.optlaseng.2015.03.006.
  237. Zuo, C., Sun, J., Li, J., Zhang, J., Asundi, A. and Chen, Q. (2017), "High-resolution transport-of-intensity quantitative phase microscopy with annular illumination", Sci. Rep., 7(1), 1-22. https://doi.org/10.1038/s41598-017-06837-1.