Ocean Systems Engineering

  • 제12권1호
  • /
  • Pages.1-22
  • /
  • 2022
  • /
  • 2093-6702(pISSN)
  • /
  • 2093-677X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

SCFs in offshore two-planar tubular TT-joints reinforced with internal ring stiffeners

  • Ahmadi, Hamid (Faculty of Civil Engineering, University of Tabriz) ;
  • Imani, Hossein (Faculty of Civil Engineering, University of Tabriz)
  • 투고 : 2021.04.08
  • 심사 : 2022.01.13
  • 발행 : 2022.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

The majority of tubular joints commonly found in offshore jacket structures are multi-planar. Investigating the effect of loaded out-of-plane braces on the values of the stress concentration factor (SCF) in offshore tubular joints has been the objective of numerous research works. However, due to the diversity of joint types and loading conditions, a number of quite important cases still exist that have not been studied thoroughly. Among them are internally ring-stiffened two-planar TT-joints subjected to axial loading. In the present research, data extracted from the stress analysis of 243 finite element (FE) models, verified against available numerical and experimental data, was used to study the effects of geometrical parameters on the chord-side SCFs in two-planar tubular TT-joints reinforced with internal ring stiffeners subjected to two types of axial loading. Parametric FE study was followed by a set of nonlinear regression analyses to develop six new SCF parametric equations for the fatigue analysis and design of axially-loaded two-planar TT-joints reinforced with internal ring stiffeners.

키워드

과제정보

Useful comments of anonymous reviewers on draft version of this paper are highly appreciated.

참고문헌

  1. Ahmadi, H. (2016), "A probability distribution model for SCFs in internally ring-stiffened tubular KT-joints of offshore structures subjected to out-of-plane bending loads", Ocean Eng., 116, 184-199, https://doi.org/10.1016/j.oceaneng.2016.02.037.
  2. Ahmadi, H. and Kouhi, A. (2020), "Stress concentration factors of multi-planar tubular XT-joints subjected to out-of-plane bending moments", Appl. Ocean Res., 96, 102058, https://doi.org/10.1016/j.apor.2020.102058.
  3. Ahmadi, H. and Lotfollahi-Yaghin, M.A. (2012a), "A probability distribution model for stress concentration factors in multi-planar tubular DKT-joints of steel offshore structures", Appl. Ocean Res., 34, 21-32, https://doi.org/10.1016/j.apor.2011.11.002.
  4. Ahmadi, H. and Lotfollahi-Yaghin, M.A. (2012b), "Geometrically parametric study of central brace SCFs in offshore three-planar tubular KT-joints", J. Constr. Steel Res., 71, 149-161, https://doi.org/10.1016/j.jcsr.2011.10.024.
  5. Ahmadi, H. and Lotfollahi-Yaghin, M.A. (2013), "Effect of SCFs on S-N based fatigue reliability of multi-planar tubular DKT-joints of offshore jacket-type structures", Ships Offshore Struct., 8, 55-72, https://doi.org/10.1080/17445302.2011.627750.
  6. Ahmadi, H. and Lotfollahi-Yaghin, M.A. (2015), "Stress concentration due to in-plane bending (IPB) loads in ring-stiffened tubular KT-joints of offshore structures: Parametric study and design formulation", Appl. Ocean Res., 51, 54-66, https://doi.org/10.1016/j.apor.2015.02.009.
  7. Ahmadi, H. and Mousavi Nejad Benam, M.A. (2017), "Probabilistic analysis of SCFs in unstiffened gap tubular KT-joints of jacket structures under the OPB moment loads", Adv. Struct. Eng., 20, 595-615, https://doi.org/10.1177%2F1369433216658487. https://doi.org/10.1177%2F1369433216658487
  8. Ahmadi, H. and Zavvar, E. (2015), "Stress concentration factors induced by out-of-plane bending loads in ring-stiffened tubular KT-joints of jacket structures", Thin-Walled Struct., 91, 82-95, https://doi.org/10.1016/j.tws.2015.02.011.
  9. Ahmadi, H. and Zavvar, E. (2016), "The effect of multi-planarity on the SCFs in offshore tubular KT-joints subjected to in-plane and out-of-plane bending loads", Thin-Walled Struct., 106, 148-165, https://doi.org/10.1016/j.tws.2016.04.020.
  10. Ahmadi, H., Lotfollahi-Yaghin, M.A. and Aminfar, M.H. (2011a), "Distribution of weld toe stress concentration factors on the central brace in two-planar CHS DKT-connections of steel offshore structures", Thin-Walled Struct., 49, 1225-1236, https://doi.org/10.1016/j.tws.2011.06.001.
  11. Ahmadi, H., Lotfollahi-Yaghin, M.A. and Aminfar, M.H. (2011b), "Effect of stress concentration factors on the structural integrity assessment of multi-planar offshore tubular DKT-joints based on the fracture mechanics fatigue reliability approach", Ocean Eng., 38, 1883-1893, https://doi.org/10.1016/j.oceaneng.2011.08.004.
  12. Ahmadi, H., Lotfollahi-Yaghin, M.A. and Aminfar, M.H. (2011c), "Geometrical effect on SCF distribution in uni-planar tubular DKT-joints under axial loads", J. Constr. Steel Res., 67(8), 1282-1291, https://doi.org/10.1016/j.jcsr.2011.03.011.
  13. Ahmadi, H., Lotfollahi-Yaghin, M.A. and Aminfar, M.H. (2012a), "The development of fatigue design formulas for the outer brace SCFs in offshore three-planar tubular KT-joints", Thin-Walled Struct., 58, 67-78, https://doi.org/10.1016/j.tws.2012.04.011.
  14. Ahmadi, H., Lotfollahi-Yaghin, M.A. and Shao, Y.B. (2013), "Chord-side SCF distribution of central brace in internally ring-stiffened tubular KT-joints: A geometrically parametric study", Thin-Walled Struct., 70, 93-105, https://doi.org/10.1016/j.tws.2013.04.011.
  15. Ahmadi, H., Lotfollahi-Yaghin, M.A., Shao, Y.B. and Aminfar, M.H. (2012b), "Parametric study and formulation of outer-brace geometric stress concentration factors in internally ring-stiffened tubular KT-joints of offshore structures", Appl. Ocean Res., 38, 74-91, https://doi.org/10.1016/j.apor.2012.07.004.
  16. Ahmadi, H., Mohammadi, A.H. and Yeganeh, A. (2015), "Probability density functions of SCFs in internally ring-stiffened tubular KT-joints of offshore structures subjected to axial load", Thin-Walled Struct., 94, 485-499, https://doi.org/10.1016/j.tws.2015.05.012.
  17. Ahmadi, H., Mohammadi, A.H., Yeganeh, A. and Zavvar, E. (2016), "Probabilistic analysis of stress concentration factors in tubular KT-joints reinforced with internal ring stiffeners under in-plane bending loads", Thin-Walled Struct., 99, 58-75, https://doi.org/10.1016/j.tws.2015.11.010.
  18. American Petroleum Institute (API) (2007), Recommended practice for planning, designing and constructing fixed offshore platforms: Working stress design: RP 2A-WSD. 21st Edition, Errata and Supplement 3, Washington DC, US.
  19. American Welding Society (AWS) (2002), Structural welding code: AWS D 1.1. Miami (FL), US.
  20. Asgarian, B., Mokarram, V. and Alanjari, P. (2014), "Local joint flexibility equations for Y-T and K-type tubular joints", Ocean Syst. Eng., 4(2), 151-167, https://doi.org/10.12989/ose.2014.4.2.151.
  21. Bomel Consulting Engineers (1994), "Assessment of SCF equations using Shell/KSEPL finite element data",
  22. Cao, J.J., Yang, G.J. and Packer, J.A. (1997), "FE mesh generation for circular tubular joints with or without cracks", Proceedings of the 7th International Offshore and Polar Engineering Conference, Honolulu (HI), US.
  23. Chang, E. and Dover, W.D. (1999a), "Parametric equations to predict stress distributions along the intersection of tubular X and DT-joints", Int. J. Fatigue, 21, 619-635, https://doi.org/10.1016/S0142-1123(99)00018-3.
  24. Chang, E. and Dover, W.D. (1999b), "Prediction of stress distributions along the intersection of tubular Y and T-joints", Int. J. Fatigue, 21, 361-381, https://doi.org/10.1016/S0142-1123(98)00083-8.
  25. Chiew, S.P., Soh, C.K. and Wu, N.W. (1999), "Experimental and numerical stress analyses of tubular XT-joint", J. Struct. Eng.,125, 1239-1248, https://doi.org/10.1061/(ASCE)0733-9445(1999)125:11(1239).
  26. Chiew, S.P., Soh, C.K. and Wu, N.W. (2000), "General SCF design equations for steel multiplanar tubular XX-joints", Int. J. Fatigue, 22, 283-293, https://doi.org/10.1016/S0142-1123(99)00130-9.
  27. Efthymiou, M. (1988), "Development of SCF formulae and generalized influence functions for use in fatigue analysis", OTJ 88, Surrey, UK.
  28. Gao, F. (2006), "Stress and strain concentrations of completely overlapped tubular joints under lap brace OPB load", Thin-Walled Struct., 44, 861-871, https://doi.org/10.1016/j.tws.2006.08.017.
  29. Gao, F., Shao, Y.B. and Gho, W.M. (2007), "Stress and strain concentration factors of completely overlapped tubular joints under lap brace IPB load", J. Constr. Steel Res., 63, 305-316, https://doi.org/10.1016/j.jcsr.2006.05.007.
  30. Gaspar, B., Garbatov, Y. and Guedes Soares, C. (2011), "Effect of weld shape imperfections on the structural hot-spot stress distribution", Ships Offshore Struct., 6(1-2), 145-159, https://doi.org/10.1080/17445302.2010.497052.
  31. Gho, W.M. and Gao, F. (2004), "Parametric equations for stress concentration factors in completely overlapped tubular K(N)-joints", J. Constr. Steel Res., 60, 1761-1782, https://doi.org/10.1016/j.jcsr.2004.05.003.
  32. Guarracino, F. (2011), "A simple formula for complementing FE analyses in the estimation of the effects of local conditions in circular cylindrical shells", Comput. Model. Eng. Sci. (CMES), 72(3), 167-184, doi:10.3970/cmes.2011.072.167.
  33. Hellier, A.K., Connolly, M. and Dover, W.D. (1990), "Stress concentration factors for tubular Y and T-joints", Int. J. Fatigue, 12, 13-23, https://doi.org/10.1016/0142-1123(90)90338-F.
  34. Hoon, K.H., Wong, L.K. and Soh, A.K. (2001), "Experimental investigation of a doubler-plate reinforced tubular T-joint subjected to combined loadings", J. Constr. Steel Res., 57, 1015-1039, https://doi.org/10.1016/S0143-974X(01)00023-2.
  35. IIW-XV-E (1999), Recommended fatigue design procedure for welded hollow section joints, IIW Docs, XV-1035-99/XIII-1804-99. International Institute of Welding, France.
  36. Karamanos, S.A., Romeijn, A. and Wardenier, J. (1999), "Stress concentrations in multi-planar welded CHS XX-connections", J. Constr. Steel Res., 50, 259-282, https://doi.org/10.1016/S0143-974X(98)00244-2.
  37. Karamanos, S.A., Romeijn, A. and Wardenier, J. (2000), "Stress concentrations in tubular gap K-joints: mechanics and fatigue design", Eng. Struct., 22, 4-14, https://doi.org/10.1016/S0141-0296(98)00062-5.
  38. Karamanos, S.A., Romeijn, A. and Wardenier, J. (2002), "SCF equations in multi-planar welded tubular DT-joints including bending effects", Mar. Struct., 15, 157-173, https://doi.org/10.1016/S0951-8339(01)00020-X.
  39. Kuang, J.G., Potvin, A.B. and Leick, R.D. (1975), "Stress concentration in tubular joints", Proceedings of the Offshore Technology Conference, Paper OTC 2205, Houston (TX), US.
  40. Lee, M.K. and Wilmshurst, S.R. (1995), "Numerical modeling of CHS joints with multiplanar double-K configuration", J. Constr. Steel Res., 32, 281-301, https://doi.org/10.1016/0143-974X(95)93899-F.
  41. Lee, M.M.K. (1999), "Strength, stress and fracture analyses of offshore tubular joints using finite elements", J. Constr. Steel Res., 51, 265-286, https://doi.org/10.1016/S0143-974X(99)00025-5.
  42. Liu, G., Zhao, X. and Huang, Y. (2015), "Prediction of stress distribution along the intersection of tubular T-joints by a novel structural stress approach", Int. J. Fatigue, 80, 216-230, https://doi.org/10.1016/j.ijfatigue.2015.05.021.
  43. Lotfollahi-Yaghin, M.A. and Ahmadi, H. (2010), "Effect of geometrical parameters on SCF distribution along the weld toe of tubular KT-joints under balanced axial loads", Int. J. Fatigue, 32, 703-719, https://doi.org/10.1016/j.ijfatigue.2009.10.008.
  44. Lotfollahi-Yaghin, M.A. and Ahmadi, H. (2011), "Geometric stress distribution along the weld toe of the outer brace in two-planar tubular DKT-joints: parametric study and deriving the SCF design equations", Mar. Struct., 24, 239-260, https://doi.org/10.1016/j.marstruc.2011.02.005.
  45. Morgan, M.R. and Lee, M.M.K. (1998a), "Parametric equations for distributions of stress concentration factors in tubular K-joints under out-of-plane moment loading", Int. J. Fatigue, 20, 449-461, https://doi.org/10.1016/S0142-1123(98)00011-5.
  46. Morgan, M.R. and Lee, M.M.K. (1998b), "Prediction of stress concentrations and degrees of bending in axially loaded tubular K-joints", J. Constr. Steel Res., 45(1), 67-97, https://doi.org/10.1016/S0143-974X(97)00059-X.
  47. Myers, P.T., Brennan, F.P. and Dover, W.D. (2001), "The effect of rack/rib plate on the stress concentration factors in jack-up chords", Mar. Struct., 14, 485-505, https://doi.org/10.1016/S0951-8339(00)00051-4.
  48. N'Diaye, A., Hariri, S., Pluvinage, G. and Azari, Z. (2007), "Stress concentration factor analysis for notched welded tubular T-joints", Int. J. Fatigue, 29, 1554-1570, https://doi.org/10.1016/j.ijfatigue.2006.10.030.
  49. Nwosu, D.I., Swamidas, A.S.J. and Munaswamy, K. (1995), "Numerical stress analysis of internal ring-stiffened tubular T-joints", J. Offshore Mech. Arct., 117, 113-125, https://doi.org/10.1115/1.2827061.
  50. Prashob, P.S., Shashikala, A.P. and Somasundaran, T.P. (2018), "Effect of FRP parameters in strengthening the tubular joint for offshore structures", Ocean Syst. Eng., 8(4), 409-426, https://doi.org/10.12989/ose.2018.8.4.409.
  51. Shao, Y.B. (2004a), "Fatigue behaviour of uni-planar CHS gap K-joints under axial and in-plane bending loads", Ph.D. Dissertation, School of Civil & Environmental Engineering, Nanyang Technological University, Singapore.
  52. Shao, Y.B. (2004b), "Proposed equations of stress concentration factor (SCF) for gap tubular K-joints subjected to bending load", Int. J. Space Struct., 19, 137-147, https://doi.org/10.1260%2F0266351042886667. https://doi.org/10.1260%2F0266351042886667
  53. Shao, Y.B. (2007), "Geometrical effect on the stress distribution along weld toe for tubular T- and K-joints under axial loading", J. Constr. Steel Res., 63, 1351-1360, https://doi.org/10.1016/j.jcsr.2006.12.005.
  54. Shao, Y.B., Du, Z.F. and Lie, S.T. (2009), "Prediction of hot spot stress distribution for tubular K-joints under basic loadings", J. Constr. Steel Res., 65, 2011-2026, https://doi.org/10.1016/j.jcsr.2009.05.004.
  55. Smedley, P. and Fisher, P. (1991), "Stress concentration factors for simple tubular joints", Proceedings of the International Offshore and Polar Engineering Conference (ISOPE), Edinburgh.
  56. Swanson Analysis Systems Inc. (2009), "ANSYS contact technology guide", Canonsburg (PA), US.
  57. UK Department of Energy (DoE) (1983), "Background notes to the fatigue guidance of offshore tubular joints", UK DoE, London, UK.
  58. UK Health and Safety Executive (1995), "Offshore installations: guidance on design, construction and certification", 3rd amendment to 4th edition. London, UK.
  59. UK Health and Safety Executive (HSE) (1997), "OTH 354: Stress concentration factors for simple tubular joints - assessment of existing and development of new parametric formulae", UK HSE, London, UK.
  60. Wimpey Offshore (1991), "In-service database for ring-stiffened tubular joints", Report WOL 035/91.
  61. Wingerde, A.M., Packer, J.A. and Wardenier, J. (2001), "Simplified SCF formulae and graphs for CHS and RHS K- and KK-connections", J. Constr. Steel Res., 57, 221-252, https://doi.org/10.1016/S0143-974X(00)00015-8.
  62. Woghiren, C.O. and Brennan, F.P. (2009), "Weld toe stress concentrations in multi planar stiffened tubular KK Joints", Int. J. Fatigue, 31, 164-172, https://doi.org/10.1016/j.ijfatigue.2008.03.039.
  63. Xu, F., Chen, J. and Jin, W. (2015), "Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading", Thin-Walled Struct., 93, 149-157, https://doi.org/10.1016/j.tws.2015.03.019.
  64. Yang, J., Chen, Y. and Hu, K. (2015), "Stress concentration factors of negative large eccentricity tubular N-joints under axial compressive loading in vertical brace", Thin-Walled Struct., 96, 359-371, https://doi.org/10.1016/j.tws.2015.08.027.