Computers and Concrete

  • 제29권3호
  • /
  • Pages.169-186
  • /
  • 2022
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Statistical analysis of the influences of admixtures and elevated temperatures on mortar properties

  • Topcu, Ilker Bekir (Department of Civil Engineering, Eskisehir Osmangazi University) ;
  • Unverdi, Aytac (Department of Civil Engineering, Eskisehir Osmangazi University) ;
  • Yildirim, Vural (Institute of Earth and Space Sciences, Eskisehir Technical University)
  • 투고 : 2020.02.26
  • 심사 : 2022.03.03
  • 발행 : 2022.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Mortar is produced with different degrees of temperature and ratios of admixture materials. In order to produce strength mortar, the degree of temperature and the ratio of admixture materials must be optimized. This paper examines experimental effects by applying certain degrees of temperature and ratios of admixture materials to statistically understand the changes in the strength of mortar. The Taguchi method is used for the above-mentioned optimization problem. Firstly, factorial ANOVA is used to investigate the difference of means between the experiments. Due to the significant differences in obtained means, the regression analysis is applied. On the other hand, the effects of the varying degrees of temperature and admixture ratios are presented via 3D plots. Finally, the statistical results of ANOVA and Taguchi indicate that degree of temperature and the different ratios of admixture materials can affect the behaviour of mortar under the tests.

키워드

과제정보

This article was produced from a part of Ph.D. thesis of A. Unverdi entitled "Statistical modelling of mechanical properties of mortars with chemical admixtures under high temperature and fire effect". Graduate School of Engineering, Eskisehir Osmangazi University, Eskisehir, Turkey, 2021.

참고문헌

  1. Binici, H., Temiz, H., Sevinc, A.H., Eken, M., Kara, M. and Sayir, Z. (2013), "Investigation of aluminium sawdust, pumice concrete and gas concrete powder incorporating concretes under high temperature", Elect. J. Constr. Tech., 9(1), 1-15.
  2. Bozkurt, N. (2013), "The effect of high temperature on concrete containing perlite powder", SDU Int. J. Tech. Sci., 5(1), 87-93.
  3. Canbaz, M., Topcu, I.B. and Atesin, O. (2016), "Effect of admixture ratio and aggregate type on self-leveling screed properties", Constr. Build. Mater., 116, 321-325. https://doi.org/10.1016/j.conbuildmat.2016.04.084.
  4. Chang, S.C., Wang, C.C. and Wang, H.Y. (2018), "Study on the engineering and electricity properties of cement mortar added with waste LCD glass and piezoelectric powders", Comput. Concrete, 21(3), 311-319. https://doi.org/10.12989/cac.2018.21.3.311.
  5. Chatterjee, A. and Das, D. (2013), "Assessing flow response of self-compacting mortar by taguchi method and Anova interaction", Mater. Res., 16(5), 1084-1091. https://doi.org/10.1590/S1516-14392013005000083
  6. Cuenca-Moyano, G.M., Martin-Pascual, J., Martin-Morales, M., Valverde-Palacios, I. and Zamorano, M. (2020), "Effects of water to cement ratio, recycled fine aggregate and air entraining/plasticizer admixture on masonry mortar properties", Constr. Build. Mater., 230, 1-18. https://doi.org/10.1016/j.conbuildmat.2019.116929.
  7. Cui, W., Huang, J., Song, H. and Xiao, M. (2017), "Development of two new anti-washout grouting materials using multi-way ANOVA in conjunction with grey relational analysis", Constr. Build. Mater., 156, 184-198. https://doi.org/10.1016/j.conbuildmat.2017.08.126.
  8. Devi, K., Saini, B. and Aggarwal, P. (2019), "Utilization of Kota stone slurry powder and accelerators in concrete", Comput. Concrete, 23(3), 189-201. https://doi.org/10.12989/cac.2019.23.3.189.
  9. Erdal, H., Erdal, M., Simsek, O. and Erdal, H.I. (2018), "Prediction of concrete compressive strength using nondestructive test results", Comput. Concrete, 21(4), 407-417. https://doi.org/10.12989/cac.2018.21.4.407.
  10. Kaya, T. and Yazicioglu, S. (2015a), "Effect of high temperature on mechanical and physical properties of mortars with calcined bentonite additive", BEU J. Sci., 4(2), 150-160.
  11. Kaya, T. and Yazicioglu, S. (2015b), "High Temperature influence on the mechanical properties of concrete which covered with different type plasters", Bilecik Seyh Edebali Univ. J. Sci., 2(2), 43-52.
  12. Kaya, T., Karakurt, C. and Dumangoz, M. (2014), "Effect of high temperature on porosity and compressive strength of mineral additive used self-compacting concretes", Bilecik Seyh Edebali Univ. J. Sci., 1(1), 39-44.
  13. Kivak, T. (2014), "Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts", Meas., 50, 19-28. https://doi.org/10.1016/j.measurement.2013.12.017.
  14. Kizilkanat, A.B. and Yuzer, N. (2008), "Compressive strengthcolor change relationship in mortars subjected to high temperatures", Tech. J. Turkish Chamber Civil Eng., 289, 4381-4392.
  15. Ou, Y.C., Kurniawan, R.A., Kurniawan, D.P. and Nguyen, N.D. (2012), "Plastic hinge length of circular reinforced concrete columns", Comput. Concrete, 10(6), 663-681. https://doi.org/10.12989/cac.2012.10.6.663.
  16. Peng, S.S., Wang, E.H., Wang, H.Y. and Chou, Y.T. (2012), "Quality assessment of high performance concrete using digitized image elements", Comput. Concrete, 10(4), 409-417. https://doi.org/10.12989/cac.2012.10.4.409.
  17. Ramezanianpour, A.A., Kazemian, A., Radaei, E., AzariJafari, H. and Moghaddam, M.A. (2014), "Influence of Iranian lowreactivity GGBFS on the properties of mortars and concretes by Taguchi method", Comput. Concrete, 13(4), 423-436. https://doi.org/10.12989/cac.2014.13.4.423.
  18. Saridemir, M. (2017), "Modelling the flexural strength of mortars containing different mineral admixtures via GEP and RA", Comput. Concrete, 19(6), 717-724. https://doi.org/10.12989/cac.2017.19.6.717.
  19. Schackow, A., Ferrari, A.K., Effting, C., Alves, V.O. and Gomes, I.R. (2019), "Stabilized mortar with air incorporator agent and plasticizer set retarder: Performance measurement", Revista IBRACON de Estruturas e Materiais, 12(6), 1248-1259. https://doi.org/10.1590/S1983-41952019000600002.
  20. Senoglu, B. and Acitas, S. (2011), "Statistical experiment design: Fixed effect models", Nobel Publication and Distribution, Ankara, Turkey.
  21. Sevil, T., Baran, M., Bilir, T. and Canbay, E. (2011), "Use of steel fiber reinforced mortar for seismic strengthening", Constr. Build. Mater., 25(2), 892-899. https://doi.org/10.1016/j.conbuildmat.2010.06.096.
  22. Subasi, S., Isbilir, B. and Ercan, I. (2011), "Effect of high temperature on mechanical properties of cement samples with fly ash substitution", J. Polytech., 14(2), 141-148.
  23. Tang, C.W. (2010), "Hydration properties of cement pastes containing high-volume mineral admixtures", Comput. Concrete, 7(1), 17-38. https://doi.org/10.12989/cac.2010.7.1.017.
  24. Tang, C.W. (2014), "Producing synthetic lightweight aggregates by treating waste TFT-LCD glass powder and reservoir sediments", Comput. Concrete, 13(3), 325-342. https://doi.org/10.12989/cac.2014.13.3.325.
  25. Tanyildizi, H. and Sahin, M. (2015), "Application of Taguchi method for optimization of concrete strengthened with polymer after high temperature", Constr. Build. Mater., 79, 97-103. https://doi.org/10.1016/j.conbuildmat.2015.01.039.
  26. Teimortashlu, E., Dehestani, M. and Jalal, M. (2018), "Application of Taguchi method for compressive strength optimization of tertiary blended self-compacting mortar", Constr. Build. Mater., 190, 1182-1191. https://doi.org/10.1016/j.conbuildmat.2018.09.165.
  27. Topcu, I.B. (1996), "Effect of plasticizer and frost resistance admixtures on concrete properties", Proceedings of National Concrete Congress, 45-54, Istanbul, Turkey.
  28. Topcu, I.B., Canbaz, M. and Karakurt, C. (2006), "Utilization of chemical admixtures for concrete production", J. Polytech., 9(1), 59-63.
  29. TS 196-1. (2016), "Methods of testing cement-Part 1: Determination of strength", TSE, Ankara, Turkey.
  30. Unverdi, A. (2021), "Statistical modelling of mechanical properties of mortars with chemical admixtures under high temperature and fire effect", Ph.D. Dissertation of Philosophy, Eskisehir Osmangazi University, Eskisehir, Turkey.
  31. Yeh, I.C. (2008), "Modeling slump of concrete with fly ash and superplasticizer", Comput. Concrete, 5(6), 559-572. https://doi.org/10.12989/cac.2008.5.6.559.