Smart Structures and Systems

  • 제29권3호
  • /
  • Pages.475-484
  • /
  • 2022
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A cable tension identification technology using percussion sound

  • Wang, Guowei (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Lu, Wensheng (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Yuan, Cheng (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Kong, Qingzhao (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University)
  • 투고 : 2021.04.22
  • 심사 : 2021.10.20
  • 발행 : 2022.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

The loss of cable tension for civil infrastructure reduces structural bearing capacity and causes harmful deformation of structures. Currently, most of the structural health monitoring (SHM) approaches for cables rely on contact transducers. This paper proposes a cable tension identification technology using percussion sound, which provides a fast determination of steel cable tension without physical contact between cables and sensors. Notably, inspired by the concept of tensioning strings for piano tuning, this proposed technology predicts cable tension value by deep learning assisted classification of "percussion" sound from tapping a steel cable. To simulate the non-linear mapping of human ears to sound and to better quantify the minor changes in the high-frequency bands of the sound spectrum generated by percussions, Mel-frequency cepstral coefficients (MFCCs) were extracted as acoustic features to train the deep learning network. A convolutional neural network (CNN) with four convolutional layers and two global pooling layers was employed to identify the cable tension in a certain designed range. Moreover, theoretical and finite element methods (FEM) were conducted to prove the feasibility of the proposed technology. Finally, the identification performance of the proposed technology was experimentally investigated. Overall, results show that the proposed percussion-based technology has great potentials for estimating cable tension for in-situ structural safety assessment.

키워드

과제정보

This research is financially supported by National Key Research Program of China (Grant No. 2020YFC1512500), National Natural Science Foundation of China (Grant Nos. 51638012 and 51978507), Science and Technology Commission of Shanghai Municipality (Grant No. 19DZ1201200), and Innovation Foundation for Universities Collaboration of Shandong Province (Grant No. XTZ201903).

참고문헌

  1. Bao, Y., Shi, Z., Beck, J.L., Li, H. and Hou, T.Y. (2017), "Identification of time-varying cable tension forces based on adaptive sparse time-frequency analysis of cable vibrations", Struct. Control Health Monitor., 24(3), e1889. https://doi.org/10.1002/stc.1889
  2. Bartoli, G., Facchini, L., Pieraccini, M., Fratini, M. and Atzeni, C. (2008), "Experimental utilization of interferometric radar techniques for structural monitoring", Struct. Control Health Monitor., 15(3), 283-298. https://doi.org/10.1002/stc.252
  3. Caetano, E. (2011), On the Identification of Cable Force from Vibration Measurements, IABSE-IASS Symposium, London, UK.
  4. Cappello, C., Zonta, D., Laasri, H.A., Glisic, B. and Wang, M. (2018), "Calibration of elasto-magnetic sensors on in-service cable-stayed bridges for stress monitoring", Sensors (Basel), 18(2), p. 466. https://doi.org/10.3390/s18020466
  5. Cheng, H., Wang, F., Huo, L. and Song, G. (2020), "Detection of sand deposition in pipeline using percussion, voice recognition, and support vector machine", Struct. Health Monitor., 19(6), 2075-2090. https://doi.org/10.1177/1475921720918890
  6. Dai, W. (2016), "Acoustic scene recognition with deep learning", Detection and classification of acoustic scenes and events (DCASE) challenge, Carnegie Mellon University, Pittsburg, PA, USA.
  7. Du, W., Lei, D., Bai, P., Zhu, F. and Huang, Z. (2020), "Dynamic measurement of stay-cable force using digital image techniques", Measurement, 151. https://doi.org/10.1016/j.measurement.2019.107211
  8. Feng, D., Scarangello, T., Feng, M.Q. and Ye, Q. (2017), "Cable tension force estimate using novel noncontact vision-based sensor", Measurement, 99, 44-52. https://doi.org/10.1016/j.measurement.2016.12.020
  9. Geier, R., De Roeck, G. and Flesch, R. (2006), "Accurate cable force determination using ambient vibration measurements", Struct. Infrastr. Eng., 2(1), 43-52. https://doi.org/10.1080/15732470500253123
  10. He, J., Zhou, Z. and Jinping, O. (2013), "Optic fiber sensor-based smart bridge cable with functionality of self-sensing", Mech. Syst. Signal Process., 35(1-2), 84-94. https://doi.org/10.1016/j.ymssp.2012.08.022
  11. Hu, D., Guo, Y., Chen, X. and Zhang, C. (2017), "Cable force health monitoring of Tongwamen bridge based on fiber Bragg grating", Appl. Sci., 7(4), p. 384. https://doi.org/10.3390/app7040384
  12. Huynh, T.-C. and Kim, J.-T. (2014), "Impedance-based cable force monitoring in tendon-anchorage using portable PZT-interface technique", Mathe. Problems Eng., 2014, 1-11. https://doi.org/10.1155/2014/784731
  13. Kim, B.H. and Park, T. (2007), "Estimation of cable tension force using the frequency-based system identification method", J. Sound Vib., 304(3-5), 660-676. https://doi.org/10.1016/j.jsv.2007.03.012
  14. Kim, S.-W., Jeon, B.-G., Cheung, J.-H., Kim, S.-D. and Park, J.-B. (2017), "Stay cable tension estimation using a vision-based monitoring system under various weather conditions", J. Civil Struct. Health Monitor., 7(3), 343-357. https://doi.org/10.1007/s13349-017-0226-7
  15. Kim, S.W., Cheung, J.H., Park, J.B. and Na, S.O. (2020), "Image-based back analysis for tension estimation of suspension bridge hanger cables", Struct. Control Health Monitor., 27(4), e2508. https://doi.org/10.1002/stc.2508
  16. Kong, Q., Zhu, J., Ho, S.C.M. and Song, G. (2018), "Tapping and listening: a new approach to bolt looseness monitoring", Smart Mater. Struct., 27(7), p. 07LT02. https://doi.org/10.1088/1361-665X/aac962
  17. Lecun, Y., Bottou, L., Bengio, Y. and Haffner, P. (1998), "Gradient-based learning applied to document recognition", Proceedings of the IEEE, 86(11), 2278-2324. https://doi.org/10.1109/5.726791
  18. Li, H., Zhang, F. and Jin, Y. (2014), "Real-time identification of time-varying tension in stay cables by monitoring cable transversal acceleration", Struct. Control Health Monitor., 21(7), 1100-1117. https://doi.org/10.1002/stc.1634
  19. Li, X.-X., Ren, W.-X. and Bi, K.-M. (2015), "FBG force-testing ring for bridge cable force monitoring and temperature compensation", Sensors Actuators A: Phys., 223, 105-113. https://doi.org/10.1016/j.sna.2015.01.003
  20. Li, N., Wang, F. and Song, G. (2020), "New entropy-based vibroacoustic modulation method for metal fatigue crack detection: An exploratory study", Measurement, 150, p. 107075. https://doi.org/10.1016/j.measurement.2019.107075
  21. Modarres, C., Astorga, N., Droguett, E.L. and Meruane, V. (2018), "Convolutional neural networks for automated damage recognition and damage type identification", Struct. Control Health Monitor., 25(10), p. e2230. https://doi.org/10.1002/stc.2230
  22. Nassif, H.H., Gindy, M. and Davis, J. (2005), "Comparison of laser Doppler vibrometer with contact sensors for monitoring bridge deflection and vibration", NDT & E Int., 38(3), 213-218. https://doi.org/10.1016/j.ndteint.2004.06.012
  23. Patterson, M. (2011), Structural Glass Facades and Enclosures, John Wiley & Sons.
  24. Santos, J.P., Cremona, C., Calado, L., Silveira, P. and Orcesi, A.D. (2016), "On-line unsupervised detection of early damage", Struct. Control Health Monitor., 23(7), 1047-1069. https://doi.org/10.1002/stc.1825
  25. Shinke, T., Hironaka, K., Zui, H. and Nishimura, H. (1980), "Practical formulas for estimation of cable tension by vibration method", Proceedings of the Japan Society of Civil Engineers, 1980(294), 25-32. https://doi.org/10.2208/jscej1969.1980.294_25
  26. Sumitro, S., Kurokawa, S., Shimano, K. and Wang, M.L. (2005), "Monitoring based maintenance utilizing actual stress sensory technology", Smart Mater. Struct., 14(3), S68-S78. https://doi.org/10.1088/0964-1726/14/3/009
  27. Tang, Z., Chen, Z., Bao, Y. and Li, H. (2019), "Convolutional neural network-based data anomaly detection method using multiple information for structural health monitoring", Struct. Control Health Monitor., 26(1), p. e2296. https://doi.org/10.1002/stc.2296
  28. Tome, E.S., Pimentel, M. and Figueiras, J. (2019), "Online early damage detection and localisation using multivariate data analysis: Application to a cable-stayed bridge", Struct. Control Health Monitor., 26(11), p. e2434. https://doi.org/10.1002/stc.2434
  29. Wan, C. and Mita, A. (2010), "Early warning of hazard for pipelines by acoustic recognition using principal component analysis and one-class support vector machines", Smart Struct. Syst., Int. J., 6(4), 405-421. https://doi.org/10.12989/sss.2010.6.4.405
  30. Wang, L., Zhang, X., Huang, S. and Li, L. (2015), "Measured frequency for the estimation of cable force by vibration method", J. Eng. Mech., 141(2), p. 06014020. https://doi.org/10.1061/(asce)em.1943-7889.0000890
  31. Wang, F., Song, G. and Mo, Y.L. (2020a), "Shear loading detection of through bolts in bridge structures using a percussion-based one-dimensional memory-augmented convolutional neural network", Comput.-Aid. Civil Infrastr. Eng., 36(3), 289-301. https://doi.org/10.1111/mice.12602
  32. Wang, K., Cao, W., Su, Z., Wang, P., Zhang, X., Chen, L., Guan, R. and Lu, Y. (2020b), "Structural health monitoring of high-speed railway tracks using diffuse ultrasonic wave-based condition contrast: theory and validation", Smart Struct. Syst., Int. J., 26(2), 227-239. https://doi.org/10.12989/sss.2020.26.2.227
  33. Wang, R., Liu, F., Hou, F., Jiang, W., Hou, Q. and Yu, L. (2020c), "A non-contact fault diagnosis method for rolling bearings based on acoustic imaging and convolutional neural networks", IEEE Access, 8, 132761-132774. https://doi.org/10.1109/access.2020.3010272
  34. Xin, H., Cheng, L., Diender, R. and Veljkovic, M. (2020), "Fracture acoustic emission signals identification of stay cables in bridge engineering application using deep transfer learning and wavelet analysis", Advances in Bridge Engineering, 1(1). https://doi.org/10.1186/s43251-020-00006-7
  35. Xu, Y., Brownjohn, J. and Kong, D. (2018), "A non-contact vision-based system for multipoint displacement monitoring in a cable-stayed footbridge", Struct. Control Health Monitor., 25(5), p. e2155. https://doi.org/10.1002/stc.2155
  36. Yang, Y., Sanchez, L., Zhang, H., Roeder, A., Bowlan, J., Crochet, J., Farrar, C. and Mascarenas, D. (2019), "Estimation of full-field, full-order experimental modal model of cable vibration from digital video measurements with physics-guided unsupervised machine learning and computer vision", Struct. Control Health Monitor., 26(6), p. e2358. https://doi.org/10.1002/stc.2358
  37. Yarotsky, D. (2017), "Error bounds for approximations with deep ReLU networks", Neural Netw, 94, 103-114. https://doi.org/10.1016/j.neunet.2017.07.002
  38. Ye, X., Jin, T. and Yun, C. (2019), "A review on deep learning-based structural health monitoring of civil infrastructures", Smart Struct. Syst., Int. J., 24(5), 567-585. https://doi.org/10.12989/sss.2019.24.5.567
  39. Yu, X.-H. and Chen, G.-A. (1997), "Efficient backpropagation learning using optimal learning rate and momentum", Neural Networks, 10(3), 517-527. https://doi.org/10.1016/s0893-6080(96)00102-5
  40. Yuan, C., Zhang, J., Chen, L., Xu, J. and Kong, Q. (2021), "Timber moisture detection using wavelet packet decomposition and convolutional neural network", Smart Mater. Struct., 30(3), p. 035022. https://doi.org/10.1088/1361-665X/abdc08
  41. Zhang, Q., Lin, J., Song, H. and Sheng, G. (2018a), Fault Identification based on PD Ultrasonic Signal using RNN, DNN and CNN, 2018 Condition Monitoring and Diagnosis (CMD), https://doi.org/10.1109/CMD.2018.8535878
  42. Zhang, R., Duan, Y., Zhao, Y. and He, X. (2018b), "Temperature compensation of elasto-magneto-electric (EME) sensors in cable force monitoring using BP neural network", Sensors (Basel), 18(7), p. 2176. https://doi.org/10.3390/s18072176
  43. Zhang, G., Wu, Y., Zhao, W. and Zhang, J. (2020a), "Radar-based multipoint displacement measurements of a 1200-m-long suspension bridge", ISPRS J. Photogram. Remote Sensing, 167, 71-84. https://doi.org/10.1016/j.isprsjprs.2020.06.017
  44. Zhang, P., Zhu, H., Lu, W., Lu, X. and MacRae, G.A. (2020b), "Vibration analysis of shallow cable with horizontal spring and dashpot at one end", Eng. Struct., 211, p. 110452. https://doi.org/10.1016/j.engstruct.2020.110452
  45. Zhao, W., Zhang, G. and Zhang, J. (2020), "Cable force estimation of a long-span cable-stayed bridge with microwave interferometric radar", Comput.-Aid. Civil Infrastr. Eng., 35(12), 1419-1433. https://doi.org/10.1111/mice.12557
  46. Zui, H., Shinke, T. and Namita, Y. (1996), "Practical formulas for estimation of cable tension by vibration method", J. Struct. Eng., 122(6), 651-656. https://doi.org/10.1061/(asce)0733-9445(1996)122:6(651)