Structural Engineering and Mechanics

  • 제81권5호
  • /
  • Pages.575-589
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Pseudo-strain hardening and mechanical properties of green cementitious composites containing polypropylene fibers

  • Karimpour, Hossein (Department of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Mazloom, Moosa (Department of Civil Engineering, Shahid Rajaee Teacher Training University)
  • 투고 : 2021.03.04
  • 심사 : 2021.12.07
  • 발행 : 2022.03.10
⟨ 이전 논문 다음 논문 ⟩

초록

In order to enhance the greenness in the strain-hardening composites and to reduce the high cost of typical polyvinyl alcohol fiber reinforced engineered cementitious composite (PVA-ECC), an affordable strain-hardening composite with green binder content has been proposed. For optimizing the strain-hardening behavior of cementitious composites, this paper investigates the effects of polypropylene fibers on the first cracking strength, fracture properties, and micromechanical parameters of cementitious composites. For this purpose, digital image correlation (DIC) technique was utilized to monitor crack propagation. In addition, to have an in-depth understanding of fiber/matrix interaction, scanning electron microscope (SEM) analysis was used. To understand the effect of fibers on the strain hardening behavior of cementitious composites, ten mixes were designed with the variables of fiber length and volume. To investigate the micromechanical parameters from fracture tests on notched beam specimens, a novel technique has been suggested. In this regard, mechanical and fracture tests were carried out, and the results have been discussed utilizing both fracture and micromechanical concepts. This study shows that the fiber length and volume have optimal values; therefore, using fibers without considering the optimal values has negative effects on the strain-hardening behavior of cementitious composites.

키워드

참고문헌

  1. Afzali-Naniz, O. and Mazloom, M. (2019a), "Assessment of the influence of micro- and nano-silica on the behavior of self-compacting lightweight concrete using full factorial design", Asian J. Civil Eng., 20(1), 57-70. https://doi.org/10.1007/s42107-018-0088-2.
  2. Afzali-Naniz, O. and Mazloom, M. (2019b), "Fracture behavior of self-compacting semi-lightweight concrete containing nano-silica", Adv. Struct. Eng., 22(10), 2264-2277. https://doi.org/10.1177/1369433219837426.
  3. ASTM C1609/C1609M-19a (2019), Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading), ASTM International, West Conshohocken, PA, USA.
  4. ASTM E399-17 (2017), Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials, ASTM International, West Conshohocken, PA, USA.
  5. Bazant, Z.P., Gopalaratnaml, V.S., Buyukozturk, O., Cedolin, L., Darwin, D., Elices, M., ... & Reinhardt, H.W. (1991), "Fracture mechanics of concrete", Mech. Fract. Prog. Crack. Concrete Struct., 1-85.
  6. Bentur, A. and Mindess, S. (1990), Fiber Reinforced Cementitious Composites Amsterdam, Elsevier.
  7. Bhosale, A.B., Lakavath, C. and Prakash, S.S. (2020), "Multi-linear tensile stress-crack width relationships for hybrid fibre reinforced concrete using Inverse analysis and digital image correlation", Eng. Struct., 225, 111275. https://doi.org/10.1016/j.engstruct.2020.111275.
  8. Reddy, K.C. and Subramaniam, K.V. (2017), "Analysis for multi-linear stress-crack opening cohesive relationship: Application to macro-synthetic fiber reinforced concrete", Eng. Fract. Mech., 169, 128-145. https://doi.org/10.1016/j.engfracmech.2016.11.015.
  9. Criado, M., Gimenez, M., Menendez, E. and Alonso, M.C. (2020), "Durability performance of uncracked and cracked nano additioned UHPFRCs in a dynamic leaching system", 74th RILEM Annual Week and 40th Cement and Concrete Science Conference, Sheffield, UK.
  10. Dzaye, E.D., Schutter, G.D. and Aggelis, D. (2018), "Application of digital image correlation to cement paste", Multidisc. Digit. Publish. Inst. Proc., 2, 446. https://doi.org/10.3390/ICEM18-05332.
  11. Fischer, G. and Li, V.C. (2002), "Effect of matrix ductility on deformation behavior of steel-reinforced ECC flexural members under reversed cyclic loading conditions", Struct. J., 99(6), 781-90.
  12. Fukuyama, H. (2000), "Structural performance of engineered cementitious composite elements. composite and hybrid structures", Proceedings of 6th ASCCS Conference, 969-76. ASCCS-6 Secretariat.
  13. Fukuyama, H., Sato, Y., Li, V.C., Matsuzaki, Y. and Mihashi, H. (2000), "Ductile engineered cementitious composite elements for seismic structural applications", Proceedings of the 12 WCEE, 1672.
  14. Hillerborg, A., Modeer, M. and Petersson, P.E. ( (1976), "Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements", Cement Concrete Res., 6(6), 773-781. https://doi.org/10.1016/0008-8846(76)90007-7.
  15. Hillerborg, A. (1980), "Analysis of fracture by means of the fictitious crack model, particularly for fibre reinforced concrete", Int. J. Cement Compos., 2(4), 177-184.
  16. Hillerborg, A. (1985), "The theoretical basis of a method to determine the fracture energy GF of concrete", Mater. Struct., 18(4), 291-296. https://doi.org/10.1007/BF02472919.
  17. Huang, X., Ranade, R. and Li, V.C. (2013), "Feasibility study of developing green ECC using iron ore tailings powder as cement replacement", J. Mater. Civil Eng., 25(7), 923-931. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000674.
  18. Jia, Y., Su, H., Lai, Z., Bai, Y., Li, F. and Zhou, Z. (2020), "Moment-curvature behavior of PP-ECC bridge piers under reversed cyclic lateral loading: An experimental study", Appl. Sci., 10(12), 4056. https://doi.org/10.3390/app10124056.
  19. Jun, Z. and Stang, H. (1998), "Fatigue performance in flexure of fiber reinforced concrete", Mater. J., 95(1), 58-67.
  20. Kanda, T. and Li, V.C. (2006), "Practical design criteria for saturated pseudo strain hardening behavior in ECC", J. Adv. Concrete Technol., 4(1), 59-72. https://doi.org/10.3151/jact.4.59.
  21. Karamloo, M. and Mazloom, M. (2018), "An efficient algorithm for scaling problem of notched beam specimens with various notch to depth ratios", Comput. Concrete, 22(1), 39-51. http://doi.org/10.12989/cac.2018.22.1.039.
  22. Kazemi, M.T., Golsorkhtabar, H., Beygi, M.H.A. and Gholamitabar, M. (2017), "Fracture properties of steel fiber reinforced high strength concrete using work of fracture and size effect methods", Constr. Build. Mater., 142, 482-489. https://doi.org/10.1016/j.conbuildmat.2017.03.089.
  23. Kim, J.K., Kim, J.S., Ha, G.J. and Kim, Y.Y. (2007), "Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slag", Cement Concrete Res., 37(7), 1096-1105. https://doi.org/10.1016/j.cemconres.2007.04.006.
  24. Lepech, M.D., Li, V.C., Robertson, R.E. and Keoleian, G.A. (2008), "Design of green engineered cementitious composites for improved sustainability", ACI Mater. J., 105(6), 567.
  25. Li, V.C. (1992), "A simplified micromechanical model of compressive strength of fiber-reinforced cementitious composites", Cement Concrete Compos., 14(2), 131-141. https://doi.org/10.1016/0958-9465(92)90006-H.
  26. Li, V.C. (1993), "From micromechanics to structural engineering-the design of cementitous composites for civil engineering applications", Struct. Eng./Earthq. Eng., 10(2), 37-48.
  27. Li, V.C. (1992), "Postcrack scaling relations for fiber reinforced cementitious composites", J. Mater. Civil Eng., 4(1), 41-57. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:1(41).
  28. Li, V.C. (2002), "Large volume, high-performance applications of fibers in civil engineering", J. Appl. Polym. Sci., 83(3), 660-686. https://doi.org/10.1002/app.2263.
  29. Li, V.C. (2003), "On engineered cementitious composites (ECC)", J. Adv. Concrete Technol., 1(3), 215-230. https://doi.org/10.3151/jact.1.215.
  30. Li, V.C. (2019), Engineered Cementitious Composites (ECC): Bendable Concrete for Sustainable and Resilient Infrastructure, Springer.
  31. Li, M. and Li, V.C. (2011), "Cracking and healing of engineered cementitious composites under chloride environment", ACI Mater. J. 108(3), 333-340.
  32. Li, V.C., Wang, Y. and Backer, S. (1991), "A micromechanical model of tension-softening and bridging toughening of short random fiber reinforced brittle matrix composites", J. Mech. Phys. Solid., 39(5), 607-625. http://doi.org/10.1016/0022-5096(91)90043-N.
  33. Li, V.C., Wu, C., Wang, S., Ogawa, A. and Saito, T. (2002), "Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composite (PVA-ECC)", Mater. J., 99(5), 463-472.
  34. Lim, I., Chern, J.C., Liu, T. and Chan, Y.W. (2012), "Effect of ground granulated blast furnace slag on mechanical behavior of PVA-ECC", J. Marine Sci. Technol., 20(3), 319-324. http://doi.org/10.51400/2709-6998.1810.
  35. Lin, J.X., Song, Y., Xie, Z.H., Guo, Y.C., Yuan, B., Zeng, J.J. and Wei, X. (2020), "Static and dynamic mechanical behavior of engineered cementitious composites with PP and PVA fibers", J. Build. Eng., 29, 101097. https://doi.org/10.1016/j.jobe.2019.101097.
  36. Marshall, D.B. and Cox, B.N. (1988), "A J-integral method for calculating steady-state matrix cracking stresses in composites", Mech. Mater., 7(2), 127-133. https://doi.org/10.1016/0167-6636(88)90011-7.
  37. Mazloom, M., Karimpanah, H. and Karamloo, M. (2020), "Fracture behavior of monotype and hybrid fiber reinforced self-compacting concrete at different temperatures", Adv. Concrete Constr., 9(4), 375-386. https://doi.org/10.12989/acc.2020.9.4.375.
  38. Mazloom, M., Homayooni, S.M. and Miri, S.M. (2018a), "Effect of rock flour type on rheology and strength of self-compacting lightweight concrete", Comput. Concrete, 21(2), 199-207. https://doi.org/10.12989/cac.2018.21.2.199.
  39. Mazloom, M. and Mirzamohammadi, S. (2020), "Fracture of fibre-reinforced cementitious composites after exposure to elevated temperatures", Mag. Concrete Res., 1-13. https://doi.org/10.1680/jmacr.19.00401.
  40. Mazloom, M. and Mirzamohammadi, S. (2021), "Computing the fracture energy of fiber reinforced cementitious composites using response surface methodology", Adv. Comput. Des., 6(3), 225-239. http://doi.org/10.12989/acd.2021.6.3.225.
  41. Mazloom, M., Pourhaji, P., Shahveisi, M. and Jafari, S. H. (2019), "Studying the Park-Ang damage index of reinforced concrete structures based on equivalent sinusoidal waves", Struct. Eng. Mech., 72(1), 83-97. http://doi.org/10.12989/sem.2019.72.1.083.
  42. Mazloom, M., Soltani, A., Karamloo, M., Hassanloo, A. and Ranjbar, A. (2018b), "Effects of silica fume, superplasticizer dosage and type of superplasticizer on the properties of normal and self-compacting concrete", Adv. Mater. Res., 7(1), 45. http://doi.org/10.12989/amr.2018.7.1.045.
  43. Mitrovic, A., Antonovic, D., Tanasic, I., Mitrovic, N., Bakic, G., Popovic, D. and Milosevic, M. (2019) , "3D digital image correlation analysis of the shrinkage strain in four dual cure composite cements", BioMed Res. Int., 2019, Article ID2041348. https://doi.org/10.1155/2019/2041348.
  44. Ong, K.C.G., Basheerkhan, M. and Paramasivam, P. (1999), "Resistance of fibre concrete slabs to low velocity projectile impact", Cement Concrete Compos., 21(5-6), 391-401. https://doi.org/10.1016/S0958-9465(99)00024-4.
  45. Pakravan, H.R. and Ozbakkaloglu, T. (2019), "Synthetic fibers for cementitious composites: A critical and in-depth review of recent advances", Constr. Build. Mater., 207, 491-518. https://doi.org/10.1016/j.conbuildmat.2019.02.078.
  46. Pan, Z., Wu, C., Liu, J., Wang, W. and Liu, J. (2015), "Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC)", Constr. Build. Mater., 78, 397-404. https://doi.org/10.1016/j.conbuildmat.2014.12.071.
  47. Parra-Montesinos, G. and Wight, J.K. (2000), "Seismic response of exterior RC column-to-steel beam connections", J. Struct. Eng., 126(10), 1113-1121. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:10(1113).
  48. Petersson, P.E. (1981), "Crack growth and development of fracture zones in plain concrete and similar materials", Doctoral Dissertation, Lund University, Sweden.
  49. Poppe, A.M. and De Schutter, G, (2005), "Cement hydration in the presence of high filler contents", Cement Concrete Res., 35(12), 2290-2299. https://doi.org/10.1016/j.cemconres.2005.03.008.
  50. Qian, S. and Li, V.C. (2008), "Simplified inverse method for determining the tensile properties of strain hardening cementitious composites (SHCC)", J. Adv. Concrete Technol., 6(2), 353-363. https://doi.org/10.3151/jact.6.353.
  51. Qing, L., Cao, G., Guan, J. and Li, S. (2021), "Experimental method for determining the fracture toughness of concrete based on the modified two-parameter model and DIC technique", Fatig. Fract. Eng. Mater. Struct., 45(2), 400-410. https://doi.org/10.1111/ffe.13602.
  52. Rice, J.R. (1968), "A path independent integral and the approximate analysis of strain concentration by notches and cracks", J. Appl. Mech., 35(2), 379-386. https://doi.org/10.1115/1.3601206.
  53. RILEM, D.R. (1985), "Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams", Mater. Struct., 18(106), 285-290. https://doi.org/10.1007/BF02472917
  54. Salehi, H. and Mazloom, M. (2019a), "Opposite effects of ground granulated blast-furnace slag and silica fume on the fracture behavior of self-compacting lightweight concrete", Constr. Build. Mater., 222, 622-632. https://doi.org/10.1016/j.conbuildmat.2019.06.183.
  55. Salehi, H. and Mazloom, M. (2019b), "An experimental investigation on fracture parameters and brittleness of self-compacting lightweight concrete containing magnetic field treated water", Arch. Civil Mech. Eng ., 19, 803-819. https://doi.org/10.1016/j.acme.2018.10.008.
  56. Salehi, H. and Mazloom, M. (2019c), "Effect of magnetic-field intensity on fracture behaviors of self-compacting lightweight concrete", Mag. Concrete Res ., 71(13), 665-679. https://doi.org/10.1680/jmacr.17.00418.
  57. Shen, B. and Paulino, G.H. (2011), "Identification of cohesive zone model and elastic parameters of fiber-reinforced cementitious composites using digital image correlation and a hybrid inverse technique", Cement Concrete Compos., 33(5), 572-85. https://doi.org/10.1016/j.cemconcomp.2011.01.005.
  58. Swaddiwudhipong, S., Lu, H.R. and Wee, T.H. (2003), "Direct tension test and tensile strain capacity of concrete at early age", Cement Concrete Res., 33(12), 2077-2084. https://doi.org/10.1016/S0008-8846(03)00231-X.
  59. Tsivilis, S., Batis, G., Chaniotakis, E., Grigoriadis, G. and Theodossis, D. (2000), "Properties and behavior of limestone cement concrete and mortar", Cement Concrete Res., 30(10), 1679-1683. https://doi.org/10.1016/S0008-8846(00)00372-0.
  60. Wang, S. and Li, V.C. (2007), "Engineered cementitious composites with high-volume fly ash", ACI Mater. J., 104(3), 233.
  61. Wu, C., Pan, Z., Jin, C. and Meng, S. (2020), "Evaluation of deformation-based seismic performance of RECC frames based on IDA method", Eng. Struct., 211, 110499. https://doi.org/10.1016/j.engstruct.2020.110499.
  62. Yang, E.H. and Li, V.C. (2010), "Strain-hardening fiber cement optimization and component tailoring by means of a micromechanical model", Constr. Build. Mater., 24(2), 130-139. https://doi.org/10.1016/j.conbuildmat.2007.05.014.
  63. Yang, E.H., Yang, Y. and Li, V.C. (2007), "Use of high volumes of fly ash to improve ECC mechanical properties and material greenness", ACI Mater. J., 104(6), 620.
  64. Zhang, J. and Li, V.C. (2002), "Effect of inclination angle on fiber rupture load in fiber-reinforced cementitious composites", Compos. Sci. Technol., 62(6), 775-781. https://doi.org/10.1016/S0266-3538(02)00045-3.
  65. Zhang, Z., Yang, F., Liu, J.C. and Wang, S. (2020), ".Eco-friendly high strength, high ductility engineered cementitious composites (ECC) with substitution of fly ash by rice husk ash", Cement Concrete Res., 137, 106200. https://doi.org/10.1016/j.cemconres.2020.106200.
  66. Zhao, P., Zsaki, A.M. and Nokken, M.R. (2018), "Using digital image correlation to evaluate plastic shrinkage cracking in cement-based materials", Constr. Build. Mater., 182, 108-117. https://doi.org/10.1016/j.conbuildmat.2018.05.239.
  67. Zhou, J., Qian, S., Beltran, M.G.S., Ye, G., van Breugel, K. and Li, V.C. (2010), "Development of engineered cementitious composites with limestone powder and blast furnace slag", Mater. Struct., 43(6), 803-14. https://doi.org/10.1617/s11527-009-9549.