Advances in concrete construction

  • 제13권 2호
  • /
  • Pages.133-152
  • /
  • 2022
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Strength and permeability of fiber-reinforced concrete incorporating waste materials

  • Xu, Yun (School of Architectural Engineering and Planning, Jiujiang University) ;
  • Xu, Yin (School of Architectural Engineering and Planning, Jiujiang University) ;
  • Almuaythir, Sultan (Civil Engineering Department, College of Engineering, Prince Sattam Bin Abdulaziz University) ;
  • Marzouki, Riadh (Chemistry Department, College of Science, King Khalid University)
  • 투고 : 2020.06.22
  • 심사 : 2022.02.04
  • 발행 : 2022.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Ecological issues such as natural resource reduction and enormous waste disposals are increasingly leading in developing civilization toward sustainable construction. The two primary environmental issues are the depletion of natural resources and the disposal of trash in open landfills. Waste steel fiber (WSF) was investigated for usage as a cement-based concrete (CBC) constituent in this research. Recycling waste fibers both makes cement composites more long and cost-effective, also aids in pollution reduction. The objective of this study is to analyze the impacts of waste fiber on the fresh and mechanical features of concrete using recycled additives. A comparative research on the durability and mechanical qualities of fiber-reinforced concrete (FRC) constructed with natural aggregates was conducted for this aim. The obstacles to successful WSF recycling methods application in the building industry have been investigated, resulting that CBCs with these fibers make an economic and long lasting choice to deal with waste materials. The workability of fiber enhanced concrete was found to be comparable to that of normal concrete. Fibers have a considerable impact on the splitting tensile strength, flexural and compressive strength of recycled concrete. Fiber may enhance the water permeability. When the WSF content is 0.6 kg/m3, the water absorption is nearly half. Fibers would have no effect on its permeability.

키워드

과제정보

The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University for funding this work through group research program under grant number RGP.2/71/42.

참고문헌

  1. Abadi, A.A.R. and Zandi, Y. (2016), "Examining the effect of shape, size and distance of pops in the non-linear behavior of steel shear walls", Turkish J. Des. Art Com., 6, 1761-1765. http://doi.org/10.7456/1060AGSE/058.
  2. Abbasi Parvin, Y., Moradi Shaghaghi, T., Pourbaba, M., Mirrezaei, S. and Zandi, Y. (2021), "A study on the flexural-shear behavior of concrete beams and comparison of the experimental test results with the prediction of different codes".
  3. Adamian, A., Hosseini Safari, K., Sheikholeslami, M., Habibi, M., Al-Furjan, M.S.H. and Chen, G. (2020), "Critical temperature and frequency characteristics of GPLs-reinforced composite doubly curved panel", Appl. Sci., 10(9), 3251. https://doi.org/10.3390/app10093251.
  4. Afrazi, M. and Yazdani, M. (2021), "Determination of the effect of soil particle size distribution on the shear behavior of sand", J. Adv. Eng. Comput., 5(2), 125-134. http://doi.org/10.25073/jaec.202152.331.
  5. Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A. and Shokrgozar, A. (2020), "Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives", Constr. Build. Mater., 262, 120034. https://doi.org/10.1016/j.conbuildmat.2020.120034.
  6. Aghakhani, M., Suhatril, M., Mohammadhassani, M., Daie, M. and Toghroli, A. (2015), "A simple modification of homotopy perturbation method for the solution of Blasius equation in semi-infinite domains", Math. Prob. Eng., 2015, 671527. https://doi.org/10.1155/2015/671527.
  7. Ajdukiewicz, A. and Kliszczewicz, A. (2002), "Influence of recycled aggregates on mechanical properties of HS/HPC", Cement Concrete Compos., 24(2), 269-279. https://doi.org/10.1016/S0958-9465(01)00012-9.
  8. Al-Furjan, M.S.H., Bolandi, S.Y., Habibi, M., Ebrahimi, F., Chen, G. and Safarpour, H. (2021a), "Enhancing vibration performance of a spinning smart nanocomposite reinforced microstructure conveying fluid flow", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-020-01255-w.
  9. Al-Furjan, M.S.H., Bolandi, S.Y., Shan, L., Habibi, M. and Jung, D.W. (2020a), "On the vibrations of a high-speed rotating multi-hybrid nanocomposite reinforced cantilevered microdisk", Mech. Base. Des. Struct. Machine., 1-29. https://doi.org/10.1080/15397734.2020.1828098.
  10. Al-Furjan, M.S.H., Dehini, R., Khorami, M., Habibi, M. and won Jung, D. (2021b), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 255, 112990. https://doi.org/10.1016/j.compstruct.2020.112990.
  11. Al-Furjan, M.S.H., Fereidouni, M., Habibi, M., Abd Ali, R., Ni, J. and Safarpour, M. (2020c), "Influence of in-plane loading on the vibrations of the fully symmetric mechanical systems via dynamic simulation and generalized differential quadrature framework", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01177-7.
  12. Al-Furjan, M.S.H., Fereidouni, M., Sedghiyan, D., Habibi, M. and won Jung, D. (2021c), "Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses", Compos. Struct., 257, 113146. https://doi.org/10.1016/j.compstruct.2020.113146.
  13. Al-Furjan, M.S.H., Habibi, M., Won Jung, D., Safarpour, H. and Safarpour, M. (2020b), "On the buckling of the polymer-CNT-fiber nanocomposite annular system under thermo-mechanical loads", Mech. Base. Des. Struct. Machine., 1-21. https://doi.org/10.1080/15397734.2020.1830106.
  14. Al-Hadithi, A.I., Abdulrahman, M.B. and Al-Rawi, M.I. (2020), "Flexural behaviour of reinforced concrete beams containing waste plastic fibers", IOP Conference Series: Materials Science and Engineering, February.
  15. Al-Kamyani, Z., Figueiredo, F.P., Hu, H., Guadagnini, M. and Pilakoutas, K. (2018), "Shrinkage and flexural behaviour of free and restrained hybrid steel fibre reinforced concrete", Constr. Build. Mater., 189, 1007-1018. https://doi.org/10.1016/j.conbuildmat.2018.09.052.
  16. Ali, S. (2014), "Behaviour of C-shaped angle shear connectors in high strength concrete", Ph.D. Dissertation of Philosophy, University of Malaya.
  17. Ali, T. (2015), "Applications of the ANFIS and LR models in the prediction of shear connection in composite beams", Ph.D. Dissertation of Philosophy, University of Malaya.
  18. Alipour, M., Torabi, M.A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A. and Hashemi, R. (2020), "Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels", Mech. Base. Des. Struct. Machine., 48(5), 525-541. https://doi.org/10.1080/15397734.2019.1633343.
  19. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010a), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2329.
  20. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010b), "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel Composite Structures.
  21. Awal, A.A. and Mohammadhosseini, H. (2016), "Green concrete production incorporating waste carpet fiber and palm oil fuel ash", J. Clean. Prod., 137, 157-166. https://doi.org/10.1016/j.jclepro.2016.06.162.
  22. Awal, A.A., Mohammadhosseini, H. and Hossain, M.Z. (2015), "Strength, modulus of elasticity and shrinkage behaviour of concrete containing waste carpet fiber", Geomat. J., 9(17), 1441-1446. http://doi.org/10.21660/2015.17.4345.
  23. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Semi-numerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comput., 1-26. https://doi.org/10.1007/s00366-020-01191-9.
  24. Bjegovic, D.A. Baricevic and Lakusic, S. (2012), "Innovative low cost fibre-reinforced concrete Part I: Mechanical and durability properties", Concrete Repair Rehabilitation Retrofitting III, 199-203.
  25. Cai, T., Zandi, Y., Agdas, A.S., Selmi, A., Issakhov, A. and Roco-Videla, A. (2021), "The compressive strength of concrete retrofitted with wind ash and steel slag pozzolans with a water-cement based polymers", Adv. Concrete Constr., 11(6), 507-519. https://doi.org/10.12989/acc.2021.11.6.507.
  26. Canivell, J., Martin-del-Rio, J.J., Alejandre, F.J., Garcia-Heras, J. and Jimenez-Aguilar, A. (2019), "Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber", Constr. Build. Mater., 197, 464-473. https://doi.org/10.1016/j.conbuildmat.2018.11.181.
  27. Cao, Y., Pourrostam, T., Zandi, Y., Denic, N., Cirkovic, B., Agdas, A.S. and Milic, M. (2021a), "Analyzing the energy performance of buildings by neuro-fuzzy logic based on different factors", Envir. Develop. Sustain., 23(12), 17349-17373. https://doi.org/10.1007/s10668-021-01382-4.
  28. Cao, Y., Selmi, A., Tohfenamarvar, R., Zandi, Y., Kasehchi, E. and Assilzahed, H. (2021b), "In-plane varying bending force effects on wave dispersion characteristics of single-layered graphene sheets", Adv. Nano Res., 10(2), 101-114. https://doi.org/10.12989/anr.2021.10.2.101.
  29. Cao, Y., Zandi, Y., Agdas, A.S., Wang, Q., Qian, X., Fu, L. and Roco-Videla, A. (2021c), "A review study of application of artificial intelligence in construction management and composite beams", Steel Compos. Struct., 39(6), 685-700. https://doi.org/10.12989/scs.2021.39.6.685.
  30. Cao, Y., Zandi, Y., Gholizadeh, M., Fu, L., Du, J., Qian, X. and Issakhov, A. (2021d), "Optimization algorithms for composite beam as smart active control of structures using genetic algorithms", Smart Struct. Syst., 27(6), 1041-1052. https://doi.org/10.12989/sss.2021.27.6.1041.
  31. Cao, Y., Zandi, Y., Rahimi, A., Fan, Q., Bai, Y., Guo, J. and Assilzadeh, H. (2021e), "Analysis of leaking ratio of sealing device for the intake port of EMC closed integral structure turbine disk through soft computing", Adv. Nano Res., 11(3), 313-326. https://doi.org/10.12989/anr.2021.11.3.313.
  32. Cao, Y., Zandi, Y., Rahimi, A., Petkovic, D., Denic, N., Stojanovic, J. and Assilzadeh, H. (2021f), "Evaluation and monitoring of impact resistance of fiber reinforced concrete by adaptive neuro fuzzy algorithm", Struct., 34, 3750-3756. https://doi.org/10.1016/j.istruc.2021.09.072.
  33. Cao, Y., Zandi, Y., Rahimi, A., Wu, Y., Fu, L., Wang, Q. and Paunovic, M. (2021g), "A new intelligence fuzzy-based hybrid metaheuristic algorithm for analyzing the application of tea waste in concrete as natural fiber", Comput. Elect. Agr., 190, 106420. https://doi.org/10.1016/j.compag.2021.106420.
  34. Chahnasir, E.S., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamad, E.T. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., 22(4), 413-424. http://doi.org/10.12989/sss.2018.22.4.413.
  35. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection-A review". https://doi.org/10.12989/scs.2019.30.5.457.
  36. Chen, F., Chen, J., Duan, R., Habibi, M. and Khadimallah, M.A. (2022), "Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle", Compos. Struct., 115195. https://doi.org/10.1016/j.compstruct.2022.115195.
  37. Cheshmeh, E., Karbon, M., Eyvazian, A., Jung, D.W., Habibi, M. and Safarpour, M. (2020), "Buckling and vibration analysis of FG-CNTRC plate subjected to thermo-mechanical load based on higher order shear deformation theory", Mech. Base. Des. Struct. Machine., 1-24. https://doi.org/10.1080/15397734.2020.1744005.
  38. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021a), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., 10(2), 175-189. https://doi.org/10.12989/anr.2021.10.2.175.
  39. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021b), "On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses", Compos. Struct., 263, 113599. https://doi.org/10.1016/j.compstruct.2021.113599.
  40. Daie, M., Jalali, A., Suhatril, M., Shariati, M., Khanouki, M.A., Shariati, A. and Kazemi-Arbat, P. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050. https://doi.org/10.5897/ijps11.1585.
  41. Davoodnabi, S.M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.
  42. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2021), "Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method", Steel Composite Struct., 40(6), 853-868. https://doi.org/10.12989/scs.2021.40.6.853.
  43. de Brito, J. and Agrela, F. (2018), New Trends in Eco-Efficient and Recycled Concrete, Woodhead Publishing.
  44. de Oliveira, L.A.P. and Castro-Gomes, J.P. (2011), "Physical and mechanical behaviour of recycled PET fibre reinforced mortar", Constr. Build. Mater., 25(4), 1712-1717. https://doi.org/10.1016/j.conbuildmat.2010.11.044.
  45. Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020), "Frequency characteristics of a GPL-Reinforced composite microdisk coupled with a piezoelectric layer", Eur. Phys. J. Plus, 135(2), 1-32. https://doi.org/10.1140/epjp/s13360-020-00217-x
  46. Elham, K. and Hesam, K. (2016), "Investigating the relationship between soil properties and infestation population of causal agent of soybean charcoal rot (Macrophomina phaseolina)", Acad. J. Agr. Res., 4(6), 363-373. http://doi.org/10.15413/ajar.2016.0106.
  47. Fanaie, N. and Tahriri, M. (2017), "Stability and stiffness analysis of a steel frame with an oblique beam using method of least work", J. Constr. Steel Res., 137, 342-357. https://doi.org/10.1016/j.jcsr.2017.06.032.
  48. Fanaie, N., Kazerani, S. and Soroushnia, S. (2017a), "Numerical study of slotted web drilled flange moment frame connection", Int. J. Num. Method. Civil Eng., 1(3), 16-23.
  49. Faraji Najarkolaie, K., Mohammadi, M. and Fanaie, N. (2017), "Realistic behavior of infilled steel frames in seismic events: Experimental and analytical study", Bulletin Earthq. Eng., 15(12), 5365-5392. https://doi.org/10.1007/s10518-017-0173-z.
  50. Fazli Shahgoli, A., Zandi, Y., Rava, A., Baharom, S., Paknahad, M., Ahmadi, M. and Wakil, K. (2021), "Estimation of the most influential parameters affecting the rotary braces damper", Iran. J. Sci. Tech. Transac. Civil Eng., 45(4), 2463-2475. https://doi.org/10.1007/s40996-020-00551-1.
  51. Feng, J., Chen, B., Sun, W. and Wang, Y. (2021), "Microbial induced calcium carbonate precipitation study using Bacillus subtilis with application to self-healing concrete preparation and characterization", Constr. Build. Mater., 280, 122460. https://doi.org/10.1016/j.conbuildmat.2021.122460.
  52. Gales, J., Parker, T., Cree, D. and Green, M. (2016), "Fire performance of sustainable recycled concrete aggregates: Mechanical properties at elevated temperatures and current research needs", Fire Tech., 52(3), 817-845. https://doi.org/10.1007/s10694-015-0504-z.
  53. Ge, Y., Ashrafi, N., Oslub, K., Zandi, Y., Gholizadeh, M. and Issakhov, A. (2021), "Maximum amplitude, quasi-static indentation, and frequency information of the angle-ply laminated curved panel subjected to low-velocity impact", Mech. Base. Des. Struct. Machine., 1-16. https://doi.org/10.1080/15397734.2021.1920032.
  54. Genetie, A. and Kebede A. (2021), "Crushed concrete as adsorptive material for removal of phosphate ions from aqueous solutions", Water Conserv. Manag., 5, 40-46.
  55. Ghazanfari, A., Soleimani, S.S., Keshavarzzadeh, M., Habibi, M., Assempuor, A. and Hashemi, R. (2020), "Prediction of FLD for sheet metal by considering through-thickness shear stresses", Mech. Base. Des. Struct. Mach., 48(6), 755-772. https://doi.org/10.1080/15397734.2019.1662310.
  56. Gowda, G., Rao, B.S. and Naik, S.M. (2017), "Behavior of recycled aggregate concrete on exposed to elevated temperature", Int. J. Civil Eng., 4(6), 5-13. https://doi.org/10.14445/23488352/IJCE-V4I6P102.
  57. Guo, J., Baharvand, A., Tazeddinova, D., Habibi, M., Safarpour, H., Roco-Videla, A. and Selmi, A. (2021a), "An intelligent computer method for vibration responses of the spinning multilayer symmetric nanosystem using multi-physics modeling", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-021-01433-4.
  58. Guo, Y., Mi, H. and Habibi, M. (2021b), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Syst. Signal Proc., 157, 107723. https://doi.org/10.1016/j.ymssp.2021.107723.
  59. Habibi, M., Darabi, R., Sa, J.C.D. and Reis, A. (2021), "An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability", Proc. Inst. Mech Eng. Part L J. Mater. Des. Appl., 235(8), 1937-1951. https://doi.org/10.1177%2F14644207211024686 https://doi.org/10.1177%2F14644207211024686
  60. Hamidian, M., Shariati, A., Khanouki, M.A., Sinaei, H., Toghroli, A. and Nouri, K. (2012), "Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring", Sci. Res. Essay., 7(21), 1997-2001. https://doi.org/10.5897/SRE11.1387.
  61. Hamidian, M., Shariati, M., Arabnejad, M.M.K. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081.
  62. hariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020i), "Stability and dynamics of viscoelastic moving rayleigh beams with an asymmetrical distribution of material parameters", Symmetry Basel, 12(4), 586. https://doi.org/10.3390/sym12040586.
  63. Hashemi, H.R.A., Alizadeh, M.A., Oyarhossein, A., Shavalipour, M., Makkiabadi and Habibi, M. (2019), "Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure", Wave. Random Complex Media, 31, 1340-1366. https://doi.org/10.1080/17455030.2019.1662968.
  64. He, X., Ding, J., Habibi, M., Safarpour, H. and Safarpour, M. (2021), "Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate", Thin Wall. Struct., 166, 108019. https://doi.org/10.1016/j.tws.2021.108019
  65. Hesami, S., Ahmadi, S. and Nematzadeh, M. (2014), "Effects of rice husk ash and fiber on mechanical properties of pervious concrete pavement", Constr. Build. Mater., 53, 680-691. https://doi.org/10.1016/j.conbuildmat.2013.11.070.
  66. Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium", Struct. Eng. Mech., 66(6), 737-748. https://doi.org/10.12989/sem.2018.66.6.737.
  67. Hosseini, S.A. and Toghroli, A. (2021), "Effect of mixing Nano-silica and Perlite with pervious concrete for nitrate removal from the contaminated water", Adv. Concrete Constr., 11(6), 531-544. https://doi.org/10.12989/acc.2021.11.6.531.
  68. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., 26(4), 485-499. https://doi.org/10.12989/scs.2018.26.4.485.
  69. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comput., 1-19. https://doi.org/10.1007/s00366-021-01456-x.
  70. Huang, H., Huang, M., Zhang, W. and Yang, S. (2021a), "Experimental study of predamaged columns strengthened by HPFL and BSP under combined load cases", Struct. Infrastruct. Eng., 17(9), 1210-1227. https://doi.org/10.1080/15732479.2020.1801768.
  71. Huang, H., Huang, M., Zhang, W. and Yang, S. (2021c), "Experimental study of predamaged columns strengthened by HPFL and BSP under combined load cases", Struct. Infrastruct. Eng., 17(9), 1210-1227. https://doi.org/10.1080/15732479.2020.1801768.
  72. Huang, H., Xue, C., Zhang, W. and Guo, M. (2022), "Torsion design of CFRP-CFST columns using a data-driven optimization approach", Eng. Struct., 251, 113479. https://doi.org/10.1016/j.engstruct.2021.113479.
  73. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021d), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., 1-13. https://doi.org/10.1007/s00366-021-01320-y.
  74. Huang, X.H., Hao, K., Oslub, M., Habibi and Tounsi, A. (2021b), "Dynamic stability/instability simulation of the rotary size-dependent functionally graded microsystem", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01399-3.
  75. Huo, J., Zhang, G., Ghabussi, A. and Habibi, M. (2021), "Bending analysis of FG-GPLRC axisymmetric circular/annular sector plates by considering elastic foundation and horizontal friction force using 3D-poroelasticity theory", Compos. Struct., 276, 114438. https://doi.org/10.1016/j.compstruct.2021.114438.
  76. Ismail, M.M., Shariati, A.S.M.A., Awal, C.E., Chiong, E.S., Chahnasir, A., Porbar, Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681.
  77. Jahanbakhti, E., Fanaie, N. and Rezaeian, A. (2017), "Experimental investigation of panel zone in rigid beam to box column connection", J. Constr. Steel Res., 137, 180-191. https://doi.org/10.1016/j.jcsr.2017.06.025.
  78. Jahandari, S., Mohammadi, M., Rahmani, A., Abolhasani, M., Miraki, H., Mohammadifar, L. and Rashidi, M. (2021a), "Mechanical properties of recycled aggregate concretes containing silica fume and steel fibres", Mater., 14(22), 7065. https://doi.org/10.3390/ma14227065.
  79. Jahandari, S., Tao, Z., Saberian, M., Shariati, M., Li, J., Abolhasani, M. and Rashidi, M. (2021b), "Geotechnical properties of lime-geogrid improved clayey subgrade under various moisture conditions", Road Mater. Pave. Des., 1-19. https://doi.org/10.1080/14680629.2021.1950816.
  80. Jalali, A., Daie, M., Nazhadan, S.V.M., Kazemi-Arbat, P. and Shariati, M. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072. https://doi.org/10.5897/IJPS11.1324.
  81. Jermsittiparsert, K., Ghabussi, A., Forooghi, A., Shavalipour, A., Habibi, M., won Jung, D. and Safa, M. (2020), "Critical voltage, thermal buckling and frequency characteristics of a thermally affected GPL reinforced composite microdisk covered with piezoelectric actuator", Mech. Base. Des. Struct. Machine., 1-23. https://doi.org/10.1080/15397734.2020.1748052.
  82. Jermsittiparsert, K., Ghabussi, A., Forooghi, A., Shavalipour, A., Habibi, M., won Jung, D. and Safa, M. (2020), "Critical voltage, thermal buckling and frequency characteristics of a thermally affected GPL reinforced composite microdisk covered with piezoelectric actuator", Mech. Base. Des. Struct. Machine., 1-23. https://doi.org/10.1080/15397734.2020.1748052.
  83. Jiang, Y., Ling, T.C., Mo, K.H. and Shi, C. (2019), "A critical review of waste glass powder-Multiple roles of utilization in cement-based materials and construction products", J. Envir. Manag., 242, 440-449. https://doi.org/10.1016/j.jenvman.2019.04.098.
  84. Jiao, J., Ghoreishi, S.M., Moradi, Z. and Oslub, K. (2021), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magneto-electro-elastic nanosystem", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01391-x
  85. Karimi, H., Rahmani, R., Othman, M.F., Zohoori, B., Mahrami, M., Kamyab, H. and Hosseini, S.E. (2016), "An analytical approach to calculate the charge density of biofunctionalized graphene layer enhanced by artificial neural networks", Plasmonics, 11(1), 95-102. https://doi.org/10.1007/s11468-015-9998-y.
  86. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.T. and Khorami, M. (2020), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 36(4), 1539-1558. https://doi.org/10.1007/s00366-019-00780-7.
  87. Kazerani, S., Fanaie, N. and Soroushnia, S. (2017), "Seismic behavior of drilled beam section in moment connections", J. Numer. Method. Civil Eng., 1(4), 1-6. https://doi.org/10.29252/nmce.1.4.1.
  88. Keith, C., Dehghani Najvani, M.A., O'Reilly, M., Medina, M., Darwin, D., Abdul Baki, A.N. and Lee, K.O. (2017), "Assessment of moisture-Tolerant coatings for decreasing open top construction time", University of Kansas Center for Research.
  89. Khanouki, M.A., Sulong, N.R., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. https://doi.org/10.1016/j.jcsr.2016.01.002.
  90. Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M. (2017a), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. https://doi.org/10.12989/eas.2017.13.6.531.
  91. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017b), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259.
  92. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of tilted angle shear connectors", Plos One, 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288.
  93. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M.M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067.
  94. Khudhair, A.B., Hadibarata, T., Yusoff, A.R.M., Teh, Z.C., Adnan, L.A. and Kamyab, H. (2015), "Pyrene metabolism by new species isolated from soil Rhizoctonia zeae SOL3", Water Air Soil Pollut., 226(6), 1-9. https://doi.org/10.1007/s11270-015-2432-4.
  95. Krolo, J., Damjanovic, D., Duvnjak, I., Bjegovic, D., Lakusic, S. and Baricevic, A. (2012), Innovative Low Cost Fibre-Reinforced Concrete Part II: Fracture Toughness and Impact Strength, Concrete Repair, Rehabilitation and Retrofitting III, CRC Press.
  96. Kumar, A., Sharma, T., Mulla, S.I., Kamyab, H., Pant, D. and Sharma, S. (2019), "Let's protect our earth: environmental challenges and implications. In Microbes and enzymes in soil health and bioremediation", 1-10. https://doi.org/10.1007/978-981-13-9117-0_1.
  97. Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of pervious concrete", Smart Struct. Syst, 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207.
  98. Li, J., Tang, F. and Habibi, M. (2020), "Bi-directional thermal buckling and resonance frequency characteristics of a GNP-reinforced composite nanostructure", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01110-y.
  99. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2020), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01166-w.
  100. Liew, K.M. and Akbar, A. (2020), "The recent progress of recycled steel fiber reinforced concrete", Constr. Build. Mater., 232, 117232. https://doi.org/10.1016/j.conbuildmat.2019.117232.
  101. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021b), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01316-8.
  102. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M.O. and Issakhov, A. (2021c), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-021-01419-2.
  103. Liu, W., Guo, Z., Wang, C. and Niu, S. (2021d), "Physico-mechanical and microstructure properties of cemented coal Gangue-Fly ash backfill: Effects of curing temperature", Constr. Build. Mater., 299, 124011. https://doi.org/10.1016/j.conbuildmat.2021.124011.
  104. Liu, Y., Wang, W., He, T., Moradi, Z. and Larco Benitez, M.A. (2021e), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-021-01454-z.
  105. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Base. Des. Struct. Machine., 1-26. https://doi.org/10.1080/15397734.2020.1784201.
  106. Liu, Z., Wu, X., Yu, M. and Habibi, M. (2020), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermo-mechanical loadings", Mech. Base. Des. Struct. Machine., 1-25. https://doi.org/10.1080/15397734.2020.1815544.
  107. Lu, N., Wang, H., Wang, K. and Liu, Y. (2021), "Maximum probabilistic and dynamic traffic load effects on short-to-medium span bridges", Comput. Model. Eng. Sci., 127(1), 345-360. https://doi.org/10.32604/cmes.2021.013792.
  108. Luo, Y., Zheng, H., Zhang, H. and Liu, Y. (2021), "Fatigue reliability evaluation of aging prestressed concrete bridge accounting for stochastic traffic loading and resistance degradation", Adv. Struct. Eng., 24(13), 3021-3029. https://doi.org/10.1177/13694332211017995.
  109. Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., 30(3), 271-280. https://doi.org/10.12989/scs.2019.30.3.271.
  110. Ma, L., Liu, X. and Moradi, Z. (2021), "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. Comput., 1-25. https://doi.org/10.1007/s00366-020-01210-9.
  111. Ma, R., Karimzadeh, M., Ghabussi, A., Zandi, Y., Baharom, S., Selmi, A. and Maureira-Carsalade, N. (2021), "Assessment of composite beam performance using GWO-ELM metaheuristic algorithm", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01363-1.
  112. Ma, X. and Wang, S. (2020), "Design and study on vibration characteristics of self-excited vibration layered subsoiler for coastal soil", J. Coastal Res., 103(SI), 318-322. https://doi.org/10.2112/SI103-066.1.
  113. Mahdi Alipour, S., Mohammadi, K., Mohammadi, A., Habibi, M. and Safarpour, H. (2019), "On dynamic of electro-elastic GNPRC cylindrical shell using modified length-couple stress parameter", Mech. Base. Des. Struct. Machine., 1-20.
  114. Majedi, M.R., Afrazi, M. and Fakhimi, A. (2021), "A micromechanical model for simulation of rock failure under high strain rate loading", Int. J. Civil Eng., 19(5), 501-515. https://doi.org/10.1007/s40999-020-00551-2.
  115. Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M.M., Baharom, S. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471.
  116. Mashkabadi, K. and Zandi, Y. (2021), "The effect of changes in sealing wall and horizontal drainage of Golfaraj dam on the values of lifting pressure parameters and maximum outlet gradient", Int. J. Nonlinear Anal. Appl., 12(1), 419-432.
  117. Maslahati Roudi, A., Chelliapan, S., Wan Mohtar, W.H.M. and Kamyab, H. (2018), "Prediction and optimization of the fenton process for the treatment of landfill leachate using an artificial neural network", Water, 10(5), 595. https://doi.org/10.3390/w10050595.
  118. Mastali, M., Dalvand, A., Sattarifard, A.R. and Illikainen, M. (2018), "Development of eco-efficient and cost-effective reinforced self-consolidation concretes with hybrid industrial/recycled steel fibers", Constr. Build. Mater., 166, 214-226. https://doi.org/10.1016/j.conbuildmat.2018.01.147.
  119. Mehdizadeh, B., Jahandari, S., Vessalas, K., Miraki, H., Rasekh, H. and Samali, B. (2021), "Fresh, mechanical, and durability properties of self-compacting mortar incorporating alumina nanoparticles and rice husk ash", Mater., 14(22), 6778. https://doi.org/10.3390/ma14226778.
  120. Mehrabi, P., Shariati, M., Kabirifar, K., Jarrah, M., Rasekh, H., Trung, N.T. and Jahandari, S. (2021), "Effect of pumice powder and nano-clay on the strength and permeability of fiber-reinforced pervious concrete incorporating recycled concrete aggregate", Constr. Build. Mater., 287, 122652. https://doi.org/10.1016/j.conbuildmat.2021.122652.
  121. Mehvish, F., Ahmed, A., Saleem, M.M. and Saleem, M.A. (2020), "Characterization of concrete incorporating waste polythene bags fibers", Pakistan J. Eng. Appl. Sci., 26.
  122. Meshkabadi, K. and Zandi, Y. (2019), "The effects of grout curtain parameters on uplift and piping phenomenon; Case Study: Sattarkhan dam", Hydro., 6(3), 71. https://doi.org/10.3390/hydrology6030071.
  123. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Phys. A: Statistic. Mech. Appl., 531, 121169. https://doi.org/10.1016/j.physa.2019.121169.
  124. Milovancevic, M., Zandi, Y., Rahimi, A., Denic, N., Vujovic, V., Zlatkovic, D. and Ivanovic, V. (2022), "Engine performance fueled with jojoba biodiesel and enzymatic saccharification on the yield of glucose of microbial lipids biodiesel", Ener., 239, 122390. https://doi.org/10.1016/j.energy.2021.122390.
  125. Ming, Y., Zandi, Y., Gholizadeh, M., Oslub, K., Khadimallah, M. A. and Issakhov, A. (2021), "Computer simulation for stability performance of sandwich annular system via adaptive tuned deep learning neural network optimization", Adv. Nano Res., 11(1), 83-99. https://doi.org/10.12989/anr.2021.11.1.083.
  126. Miraki, H., Shariatmadari, N., Ghadir, P., Jahandari, S., Tao, Z. and Siddique, R. (2021), "Clayey soil stabilization using alkali-activated volcanic ash and slag", J. Rock Mech. Geotech. Eng.. https://doi.org/10.1016/j.jrmge.2021.08.012.
  127. Moayedi, H., Aliakbarlou, H., Jebeli, M., Noormohammadiarani, O., Habibi, M., Safarpour, H. and Foong, L.K. (2020), "Thermal buckling responses of a graphene reinforced composite micropanel structure", Int. J. Appl. Mech., 12(01), 2050010. https://doi.org/10.1142/S1758825120500106.
  128. Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Khanouki, M.A. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Failure Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014.
  129. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853.
  130. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785.
  131. Mohammadhassani, M., Saleh, A., Suhatril, M. and Safa, M. (2015), "Fuzzy modelling approach for shear strength prediction of RC deep beams", Smart Struct. Syst., 16(3), 497-519. https://doi.org/10.12989/sss.2015.16.3.497.
  132. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2013b), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833.
  133. Mohammadhosseini, H., Alyousef, R., Lim, N.H.A.S., Tahir, M.M., Alabduljabbar, H., Mohamed, A.M. and Samadi, M. (2020), "Waste metalized film food packaging as low cost and ecofriendly fibrous materials in the production of sustainable and green concrete composites", J. Clean. Produc., 258, 120726. https://doi.org/10.1016/j.jclepro.2020.120726.
  134. Mohammadhosseini, H., Awal, A.A. and Yatim, J.B.M. (2017), "The impact resistance and mechanical properties of concrete reinforced with waste polypropylene carpet fibres", Constr. Build. Mater., 143, 147-157. https://doi.org/10.1016/j.conbuildmat.2017.03.109.
  135. Mohammadhosseini, H., Lim, N.H.A.S., Sam, A.R.M. and Samadi, M. (2018), "Effects of elevated temperatures on residual properties of concrete reinforced with waste polypropylene carpet fibres", Arab. J. Sci. Eng., 43(4), 1673-1686. https://doi.org/10.1007/s13369-017-2681-1.
  136. Moradi, Z., Davoudi, M., Ebrahimi, F. and Ehyaei, A.F. (2021), "Intelligent wave dispersion control of an inhomogeneous micro-shell using a proportional-derivative smart controller", Wave. Random Complex Media, 1-24. https://doi.org/10.1080/17455030.2021.1926572.
  137. Muhammad, N.Z., Shafaghat, A., Keyvanfar, A., Majid, M.Z.A., Ghoshal, S.K., Yasouj, S.E.M. and McCaffer, R. (2016), "Tests and methods of evaluating the self-healing efficiency of concrete: A review", Constr. Build. Mater., 112, 1123-1132. https://doi.org/10.1016/j.conbuildmat.2016.03.017.
  138. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020a), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279.
  139. Naghipour, M., Yousofizinsaz, G. and Shariati, M. (2020b), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines", Steel Compos. Struct., 34(3), 347-359. https://doi.org/10.12989/scs.2020.34.3.347.
  140. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., 27(5), 537-543. https://doi.org/10.12989/scs.2018.27.5.537.
  141. Nilashi, M., Rupani, P. F., Rupani, M.M., Kamyab, H., Shao, W., Ahmadi, H. and Aljojo, N. (2019), "Measuring sustainability through ecological sustainability and human sustainability: A machine learning approach", J. Clean. Prod., 240, 118162. https://doi.org/10.1016/j.jclepro.2019.118162.
  142. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Aliabad, M.D., Marto, A. and Khorami, M. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425.
  143. Nouri, K., Sulong, N.R., Ibrahim, Z. and Shariati, M. (2021), "Behaviour of novel stiffened angle shear connectors at ambient and elevated temperatures", Adv. Steel Constr., 17(1), 28-38. https://doi.org/10.18057/Ijasc.2021.17.1.4.
  144. Nowroozi, V., Hashemolhosseini, H., Afrazi, M. and Kasehchi, E. (2021), "Optimum design for soil nailing to stabilize retaining walls using FLAC3D", J. Adv. Eng. Comput., 5(2), 108-124. http://doi.org/10.25073/jaec.202152.329.
  145. Oyarhossein, M.A., Alizadeh, A.A., Habibi, M., Makkiabadi, M., Daman, M., Safarpour, H. and Jung, D.W. (2020), "Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes", Sci. Report., 10(1), 1-19. https://doi.org/10.1038/s41598-020-61855-w.
  146. Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., 28(4), 483-494. https://doi.org/10.12989/scs.2018.28.4.483.
  147. Peng, D., Chen, S., Darabi, R., Ghabussi, A. and Habibi, M. (2021), "Prediction of the bending and out-of-plane loading effects on formability response of the steel sheets", Arch. Civil Mech. Eng., 21(2), 1-13. https://doi.org/10.1007/s43452-021-00227-1.
  148. Pesic, N., Zivanovic, S., Garcia, R. and Papastergiou, P. (2016), "Mechanical properties of concrete reinforced with recycled HDPE plastic fibres", Constr. Build. Mater., 115, 362-370. https://doi.org/10.1016/j.conbuildmat.2016.04.050.
  149. Petkovic, B., Agdas, A.S., Zandi, Y., Nikolic, I., Denic, N., Radenkovic, S.D. and Stojanovic, J. (2021a), "Neuro fuzzy evaluation of circular economy based on waste generation, recycling, renewable energy, biomass and soil pollution", Rhizosphere, 19, 100418. https://doi.org/10.1016/j.rhisph.2021.100418.
  150. Petkovic, B., Zandi, Y., Agdas, A.S., Nikolic, I., Denic, N., Kojic, N. and Khan, A. (2021b), "Adaptive neuro fuzzy evaluation of energy and non-energy material productivity impact on sustainable development based on circular economy and gross domestic product", Bus. Strategy Envir., 31, 129-144. https://doi.org/10.1002/bse.2878.
  151. Ponraj, M., Talaiekhozani, A., Zin, R.M., Ismail, M., Abd Majid, M.Z., Keyvanfar, A. and Kamyab, H. (2015), "Bioconcrete strength, durability, permeability, recycling and effects on human health: A review", Conf. Adv. Civil Struct. Mech. Eng.. http://doi.org/10.15224/978-1-63248-062-0-28.
  152. Rao, A., Jha, K.N. and Misra, S. (2007), "Use of aggregates from recycled construction and demolition waste in concrete", Res. Conserv. Recycl., 50(1), 71-81. https://doi.org/10.1016/j.resconrec.2006.05.010.
  153. Razavian, L., Naghipour, M., Shariati, M. and Safa, M. (2020), "Experimental study of the behavior of composite timber columns confined with hollow rectangular steel sections under compression", Struct. Eng. Mech., 74(1), 145-156. https://doi.org/10.12989/sem.2020.74.1.145.
  154. Rouhanifar, S., Afrazi, M., Fakhimi, A. and Yazdani, M. (2021), "Strength and deformation behaviour of sand-rubber mixture", Int. J. Geotech. Eng., 15(9), 1078-1092. https://doi.org/10.1080/19386362.2020.1812193.
  155. Sadeghian, F., Haddad, A., Jahandari, S., Rasekh, H. and Ozbakkaloglu, T. (2021a), "Effects of electrokinetic phenomena on the load-bearing capacity of different steel and concrete piles: A small-scale experimental study", Canadian Geotech. J., 58(5), 741-746. https://doi.org/10.1139/cgj-2019-0650.
  156. Sadeghian, F., Jahandari, S., Haddad, A., Rasekh, H. and Li, J. (2021b), "Effects of variations of voltage and pH value on the shear strength of soil and durability of different electrodes and piles during electrokinetic phenomenon", J. Rock Mech. Geotech. Eng.. https://doi.org/10.1016/j.jrmge.2021.07.017.
  157. Safa, M. and Kachitvichyanukul, V. (2019b), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639.
  158. Safa, M., Ahmadi, M., Mehrmashadi, J., Petkovic, D., Mohammadhassani, M., Zandi, Y. and Sedghi, Y. (2020a), "Selection of the most influential parameters on vectorial crystal growth of highly oriented vertically aligned carbon nanotubes by adaptive neuro-fuzzy technique", Int. J. Hydromech., 3(3), 238-251. http://doi.org/10.1504/IJHM.2020.10030657.
  159. Safa, M., Maleka, A., Arjomand, M.A., Khorami, M. and Shariati, M. (2019), "Strain rate effects on soil-geosynthetic interaction in fine-grained soil", Geomech. Eng., 19(6), 533-542. http://doi.org/10.12989/gae.2019.19.6.523.
  160. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020b), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Phys. A Stat. Mech. Appl., 550, 124046. https://doi.org/10.1016/j.physa.2019.124046.
  161. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength", Steel Compos. Struct., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679.
  162. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., 30(5), 417-432. https://doi.org/10.12989/scs.2019.30.5.417.
  163. Sari, P.A., Suhatril, M., Osman, N., Mu'azu, M.A., Dehghani, H., Sedghi, Y. and Djuric, S. (2019), "An intelligent based-model role to simulate the factor of safe slope by support vector regression", Eng. Comput., 35(4), 1521-1531. https://doi.org/10.1007/s00366-018-0677-4.
  164. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Azar, V.M., Toghroli, A. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335.
  165. Shah, S.N.R., Sulong, N.R., Jumaat, M.Z. and Shariati, M. (2016a), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Failure Anal., 66, 240-258. https://doi.org/10.1016/j.engfailanal.2016.04.017.
  166. Shah, S.N.R., Sulong, N.R., Khan, R., Jumaat, M.Z. and Shariati, M. (2016b), "Behavior of industrial steel rack connections", Mech. Syst. Signal Proc., 70, 725-740. https://doi.org/10.1016/j.ymssp.2015.08.026.
  167. Shah, S.N.R., Sulong, N.R., Shariati, M. and Jumaat, M.Z. (2015), "Steel rack connections: Identification of most influential factors and a comparison of stiffness design methods", Plos One, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422.
  168. Shah, S.N.R., Sulong, N.R., Shariati, M., Khan, R. and Jumaat, M.Z. (2016c), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin Wall. Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021.
  169. Shahabi, S., Sulong, N., Shariati, M. and Shah, S. (2016b), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., 20(1), 185-203. https://doi.org/10.12989/scs.2016.20.1.185.
  170. Shahabi, S., Sulong, N., Shariati, M., Mohammadhassani, M. and Shah, S. (2016a), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., 20(3), 651-669. https://doi.org/10.12989/scs.2016.20.3.651.
  171. Shahgoli, A. F., Zandi, Y., Heirati, A., Khorami, M., Mehrabi, P. and Petkovic, D. (2020), "Optimisation of propylene conversion response by neuro-fuzzy approach", Int. J. Hydromech., 3(3), 228-237. http://doi.org/10.1504/IJHM.2020.10030656.
  172. Shahjalal, M., Islam, K., Rahman, J., Ahmed, K.S., Karim, M.R. and Billah, A.M. (2021), "Flexural response of fiber reinforced concrete beams with waste tires rubber and recycled aggregate", J. Clean. Prod., 278, 123842. https://doi.org/10.1016/j.jclepro.2020.123842.
  173. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng., 21(4), 1-29. https://doi.org/10.1007/s43452-021-00279-3.
  174. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational lagrangian multiplier method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. https://doi.org/10.12989/scs.2018.29.2.243.
  175. Shariati, A., Barati, M.R., Ebrahimi, F. and Toghroli, A. (2020b), "Investigation of microstructure and surface effects on vibrational characteristics of nanobeams based on nonlocal couple stress theory", Adv. Nano Res., 8(3), 191-202. https://doi.org/10.12989/anr.2020.8.3.191.
  176. Shariati, A., Barati, M.R., Ebrahimi, F., Singhal, A. and Toghroli, A. (2020a), "Investigating vibrational behavior of graphene sheets under linearly varying in-plane bending load based on the nonlocal strain gradient theory", Adv. Nano Res., 8(4), 265-276. https://doi.org/10.12989/anr.2020.8.4.265.
  177. Shariati, A., Bayrami, S.S., Ebrahimi, F. and Toghroli, A. (2020c), "Wave propagation analysis of electro-rheological fluid-filled sandwich composite beam", Mech. Base. Des. Struct. Machine., 1-10. https://doi.org/10.1080/15397734.2020.1745646.
  178. Shariati, A., Ebrahimi, F., Hosseini, S.H.S., Toghroli, A. and Bayrami, S.S. (2020d), "On the nonlinear dynamics of viscoelastic graphene sheets conveying nanoflow: Parametric excitation analysis", Mech. Base. Des. Struct. Machine., 1-18. https://doi.org/10.1080/15397734.2020.1728544.
  179. Shariati, A., Ebrahimi, F., Karimiasl, M., Selvamani, R. and Toghroli, A (2020e), "On bending characteristics of smart magneto-electro-piezoelectric nanobeams system", Adv. Nano Res., 9(3), 183-191. https://doi.org/10.12989/anr.2020.9.3.183.
  180. Shariati, A., Ebrahimi, F., Karimiasl, M., Vinyas, M. and Toghroli, A. (2020f), "On transient hygrothermal vibration of embedded viscoelastic flexoelectric/piezoelectric nanobeams under magnetic loading", Adv. Nano Res., 8(1), 49-58. https://doi.org/10.12989/anr.2020.8.1.049.
  181. Shariati, A., Ghabussi, A., Habibi, M., Safarpour, H., Safarpour, M., Tounsi, A. and Safa, M. (2020g), "Extremely large oscillation and nonlinear frequency of a multi-scale hybrid disk resting on nonlinear elastic foundation", Thin Wall. Struct., 154, 106840. https://doi.org/10.1016/j.tws.2020.106840.
  182. Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2021a), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng. Comput., 37(4), 3629-3648. https://doi.org/10.1007/s00366-020-01024-9.
  183. Shariati, A., Hosseini, S.H.S., Bayrami, S.S., Ebrahimi, F. and Toghroli, A. (2021b), "Effect of residual surface stress on parametrically excited nonlinear dynamics and instability of viscoelastic piezoelectric nanoelectromechanical resonators", Eng. Comput., 37(3), 1835-1850. https://doi.org/10.1007/s00366-019-00916-9.
  184. Shariati, A., Hosseini, S.H.S., Ebrahimi, F. and Toghroli, A. (2021c), "Nonlinear dynamics and vibration of reinforced piezoelectric scale-dependent plates as a class of nonlinear Mathieu-Hill systems: Parametric excitation analysis", Eng. Comput., 37(3), 2285-2301. https://doi.org/10.1007/s00366-020-00942-y.
  185. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020h), "On the vibrations and stability of moving viscoelastic axially functionally graded nanobeams", Mater., 13(7), 1707. https://doi.org/10.3390/ma13071707.
  186. Shariati, A., Qaderi, S., Ebrahimi, F. and Toghroli, A. (2020j), "On buckling characteristics of polymer composite plates reinforced with graphene platelets", Eng. Comput., 1-12. https://doi.org/10.1007/s00366-020-00992-2.
  187. Shariati, A., RamliSulong, N.H. and Shariati, M. (2012a), "Various types of shear connectors in composite structures: A review", Int. J. Phys. Sci., 7(22), 2876-2890. https://doi.org/10.5897/IJPSx11.004.
  188. Shariati, A., Shariati, M., Sulong, N.R., Suhatril, M., Khanouki, M.A. and Mahoutian, M. (2014a), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. https://doi.org/10.1016/j.conbuildmat.2013.11.036.
  189. Shariati, A., Sulong, N.H., Suhatril, M. and Shariati, M. (2012), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 0626DBF163901828-1831. https://doi.org/10.5897/IJPS11.1604.
  190. Shariati, M. (2008), "Assessment building using none-destructive test techniques (ultra sonic pulse velocity and Schmidt rebound hammer", Ph.D. Dissertation of Philosophy, Universiti Putra Malaysia.
  191. Shariati, M. (2013), "Behaviour of C-shaped shear connectors in stell concrete composite beams", Ph.D. Dissertation of Philosophy, Universiti Malaya.
  192. Shariati, M., A. Shariati, N.H.R. Sulong, M. Suhatril and M.M.A. Khanouki (2014b), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Failure Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017.
  193. Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2019a), "Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils", Geomech. Eng., 19(6), 473. https://doi.org/10.12989/gae.2019.19.6.473.
  194. Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2020k), "Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load", Geomech. Eng., 20(2), 87-101. https://doi.org/10.12989/gae.2020.20.2.087.
  195. Shariati, M., Davoodnabi, S.M., Toghroli, A., Kong, Z. and Shariati, A. (2021d), "Hybridization of metaheuristic algorithms with adaptive neuro-fuzzy inference system to predict load-slip behavior of angle shear connectors at elevated temperatures", Compos. Struct., 278, 114524. https://doi.org/10.1016/j.compstruct.2021.114524.
  196. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R. and Salih, M.N. (2019b), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
  197. Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020l), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., 34(3), 393. https://doi.org/10.12989/scs.2020.34.3.393.
  198. Shariati, M., Grayeli, M., Shariati, A. and Naghipour, M. (2020m), "Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading", Steel Compos. Struct., 36(5), 587-602. https://doi.org/10.12989/scs.2020.36.5.587.
  199. Shariati, M., Heyrati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P. and Poi-Ngian, S. (2019c), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553.
  200. Shariati, M., Lagzian, M., Maleki, S., Shariati, A. and Trung, N.T. (2020n), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., 35(4), 599-609. https://doi.org/10.12989/scs.2020.35.4.599.
  201. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020o), "A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0.
  202. Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020p), "Identification of the most influencing parameters on the properties of corroded concrete beams using an adaptive neuro-fuzzy inference System (ANFIS)", Steel Compos. Struct., 34(1), 155-170. https://doi.org/10.12989/scs.2020.34.1.155.
  203. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020q), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183.
  204. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N. and Poi-Ngian, S. (2019d), "Application of a hybrid artificial neural network-particle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534.
  205. Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N. (2020r), "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 1-21. https://doi.org/10.1007/s00366-019-00930-x.
  206. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., Bahadori, A. and Poi-Ngian, S. (2019e), "Application of extreme learning machine (ELM) and genetic programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319.
  207. Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020s), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct., 34(3), 377-391. https://doi.org/10.12989/scs.2020.34.3.377.
  208. Shariati, M., Rafie, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Mehrabi, P. and Poi-Ngian, S. (2019f), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Constr., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225.
  209. Shariati, M., Ramli-Sulong, N.H., Arabnejad, M.M., Shafigh, P. and Sinaei, H. (2011a), "Assessing the strength of reinforced concrete structures through ultrasonic pulse velocity and schmidt rebound hammer tests", Sci. Res. Essay., 6(1), 213-220. https://doi.org/10.5897/SRE10.879.
  210. Shariati, M., Ramli Sulong, N., Suhatril, M., Shariati, A., Arabnejad Khanouki, M. and Sinaei, H. (2012), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Proceedings of the 5th International Conference on Engineering Failure Analysis, Hague, July.
  211. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel Composite Structures, Sydney, July.
  212. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011c), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics, Seoul, August.
  213. Shariati, M., Ramli Sulong, N.H., Arabnejad, M.M.K.H. and Mahoutian, M. (2011b), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Sci. Res. Essay., 6(4), 977-983.
  214. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Khanouki, M.A. (2015), "Behavior of V-shaped angle shear connectors: Experimental and parametric study", Mater. Struct., 49(9), 3909-3926. https://doi.org/10.1617/s11527-015-0762-8.
  215. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2011d), "Behavior of channel shear connectors in normal and light weight aggregate concrete (Experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303.
  216. Shariati, M., Shariati, A., Trung, N.T., Shoaei, P., Ameri, F., Bahrami, N. and Zamanabadi, S.N. (2020t), "Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics", Constr. Build. Mater., 267, 120886. https://doi.org/10.1016/j.conbuildmat.2020.120886.
  217. Shariati, M., Sulong, N.R. and Khanouki, M.A (2012c), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008.
  218. Shariati, M., Sulong, N.R., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.
  219. Shariati, M., Sulong, N.R., Suhatril, M., Shariati, A., Khanouki, M.A. and Sinaei, H. (2012d), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039.
  220. Shariati, M., Sulong, N.R., Suhatril, M., Shariati, A., Khanouki, M.A. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050.
  221. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S.N.R., Jalali, A. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Failure Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014.
  222. Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020u), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: An experimental investigation", Steel Compos. Struct., 35(2), 237-247. https://doi.org/10.12989/scs.2020.35.2.237.
  223. Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM.
  224. Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019g), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427.
  225. Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. https://doi.org/10.5897/IJPS11.1225.
  226. Sinaei, H., Shariati, M., Abna, A.H., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Sci. Res. Essay., 7(21), 2002-2009. https://doi.org/10.5897/SRE11.1393.
  227. Someh, A.K., Saeki, N. and Notoya, T. (1996), "Corrosion protection of reinforced concrete members by using recycled steel", Proceedings of the International Conference on Solid Waste Technology and Management.
  228. Suhatril, M., Osman, N., Azura Sari, P., Shariati, M. and Marto, A. (2019), "Significance of surface eco-protection techniques for cohesive soils slope in selangor, malaysia", Geotech. Geol. Eng., 37(3), 2007-2014. https://doi.org/10.1007/s10706-018-0740-3.
  229. Taheri, E., Esgandarzadeh Fard, S., Zandi, Y. and Samali, B. (2021), "Experimental and numerical investigation of an innovative method for strengthening cold-formed steel profiles in bending throughout finite element modeling and application of neural network based on feature selection method", Appl. Sci., 11(11), 5242. https://doi.org/10.3390/app11115242.
  230. Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N.H. and Tahir, M.M. (2016), "Shear capacity of c-shaped and l-shaped angle shear connectors", Plos One, 11(8), e0156989. https://doi.org/10.1371/journal.pone.0156989.
  231. Talaiekhozani, A., Keyvanfar, A., Andalib, R., Samadi, M., Shafaghat, A., Kamyab, H. and Hussin, M.W. (2014), "Application of proteus mirabilis and proteus vulgaris mixture to design self-healing concrete", Desalination Water Treat., 52(19-21), 3623-3630. https://doi.org/10.1080/19443994.2013.854092.
  232. Tavakkoli, O., Kamyab, H., Shariati, M., Mohamed, A.M. and Junin, R. (2022), "Effect of nanoparticles on the performance of polymer/surfactant flooding for enhanced oil recovery: A review", Fuel, 312, 122867. https://doi.org/10.1016/j.fuel.2021.122867.
  233. Thomas, L.M. and Moosvi, S.A. (2020), "Hardened properties of binary cement concrete with recycled PET bottle fiber: An experimental study", Mater. Today Proc., 32, 632-637. https://doi.org/10.1016/j.matpr.2020.03.025.
  234. Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Heydari, A. and Khorami, M. (2018a), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concrete, 21(5), 525-530. https://doi.org/10.12989/cac.2018.21.5.525.
  235. Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020a), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997.
  236. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., 17(5), 623-639. http://doi.org/10.12989/scs.2014.17.5.623.
  237. Toghroli, A., Nasirianfar, M.S., Shariati, A., Khorami, M., Paknahad, M., Ahmadi, M. and Zandi, Y. (2020b), "Analysis of extended end plate connection equipped with SMA bolts using component method", Steel Compos. Struct., 36(2), 213-228. https://doi.org/10.12989/scs.2020.36.2.213.
  238. Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM, Zurich.
  239. Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018b), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., 22(4), 433-440. https://doi.org/10.12989/sss.2018.22.4.433.
  240. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Int. Manuf., 29(8), 1793-1801. https://doi.org/10.1007/s10845-016-1217-y.
  241. Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019a), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., 24(3), 415-425. https://doi.org/10.12989/sss.2019.24.3.415.
  242. Wang, H., Zandi, Y., Gholizadeh, M. and Issakhov, A. (2021), "Buckling of porosity-dependent bi-directional FG nanotube using numerical method", Adv. Nano Res., 10(5), 493-507. https://doi.org/10.12989/anr.2021.10.5.493.
  243. Wang, M., Yang, X. and Wang, W. (2022), "Establishing a 3D aggregates database from X-ray CT scans of bulk concrete", Constr. Build. Mater., 315, 125740. https://doi.org/10.1016/j.conbuildmat.2021.125740.
  244. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 1-14. https://doi.org/10.1080/15376494.2020.1824284.
  245. Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., 27(3), 389-399. https://doi.org/10.12989/scs.2018.27.3.389.
  246. Wei, Z., Zandi, Y., Gholizadeh, M., Selmi, A., Roco-Videla, A. and Konbr, U (2021), "On the optimization of building energy, material, and economic management using soft computing", Adv. Concrete Constr., 11(6), 455-468. https://doi.org/10.12989/acc.2021.11.6.455.
  247. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultra-fast-rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01396-6.
  248. Xie, Q. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., 30(5), 433-441. https://doi.org/10.12989/scs.2019.30.5.433.
  249. Xu, C (2019), "Using genetic algorithms method for the paramount design of reinforced concrete structures", Struct. Eng. Mech., 71(5), 503-513. https://doi.org/10.12989/sem.2019.71.5.503.
  250. Xu, J., Wu, Z., Chen, H., Shao, L., Zhou, X. and Wang, S. (2021a), "Study on strength behavior of basalt fiber-reinforced loess by digital image technology (DIT) and scanning electron microscope (SEM)", Arab. J. Sci. Eng., 46(11), 11319-11338. https://doi.org/10.1007/s13369-021-05787-1.
  251. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021b), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 275, 114395. https://doi.org/10.1016/j.compstruct.2021.114395.
  252. Yang, J., Du, Q. and Bao, Y. (2011), "Concrete with recycled concrete aggregate and crushed clay bricks", Constr. Build. Mater., 25(4), 1935-1945. https://doi.org/10.1016/j.conbuildmat.2010.11.063.
  253. Yanzhen, Q., Zandi, Y., Rahimi, A., Pourkhorshidi, S., Roco-Videla, A., Khadimallah, M.A. and Assilzadeh, H. (2021), "Nano-SiO2 for efficiency of geotechnical properties of fine soils in mining and civil engineering", Adv. Nano Res., 11(3), 301-312. https://doi.org/10.12989/anr.2021.11.3.301.
  254. Yavari, S., Asadpour, R., Kamyab, H., Yavari, S., Kutty, S.R.M., Baloo, L. and Sidik, A.B.C. (2021a), "Efficiency of carbon sorbents in mitigating polar herbicides leaching from tropical soil", Clean Tech. Envir. Policy., 1-10. https://doi.org/10.1007/s10098-021-02113-z.
  255. Yavari, S., Kamyab, H., Asadpour, R., Yavari, S., Sapari, N.B., Baloo, L. and Chelliapan, S. (2021b), "The fate of imazapyr herbicide in the soil amended with carbon sorbents", Biomass Convers. Biorefinery, 1-9. https://doi.org/10.1007/s13399-021-01587-7.
  256. Yazdani, M., Kabirifar, K., Frimpong, B.E., Shariati, M., Mirmozaffari, M. and Boskabadi, A. (2020), "Improving construction and demolition waste collection service in an urban area using a simheuristic approach: A case study in Sydney, Australia", J. Clean. Prod., 280, 124138. https://doi.org/10.1016/j.jclepro.2020.124138.
  257. Yin, J., Tong, H., Gholizadeh, M., Zandi, Y., Selmi, A., Roco-Videla, A. and Issakhov, A. (2021), "Economic construction management of composite beam using the head stud shear connector with encased cold-formed steel built-up fix beam via efficient computer simulation", Adv. Concrete Constr., 11(5), 429-445. https://doi.org/10.12989/acc.2021.11.5.429.
  258. Yu, X., Maalla, A. and Moradi, Z. (2022), "Electroelastic high-order computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory", Mech. Syst. Signal Proc., 165, 108373. ARTN 10837310.1016/j.ymssp.2021.108373.
  259. Zandi, Y. (2013), "Comparison of dual system of steel moment frame and thin steel plate shear walls with dual system of steel moment frame and cross bracing or chevron with a design method based on performance levels", Bull. Envir. Pharmacol. Life Sci., 2(10), 51-57.
  260. Zandi, Y. and Alayi, M. (2019), "Effect of comparison of Ardabil pozzuoli cement and type 2 Sufyan cement compressive strength viewpoints and improvement solutions", J. Struct., Constr. Eng., 6(4), 95-110. https://doi.org/10.22065/jsce.2018.117984.1454.
  261. Zandi, Y., Husem, M., Pul, S. and Mehdizadeh, M.B. (2011), "Effect of mix design on restrained shrinkage of concrete".
  262. Zandi, Y., Liu, C., Rahimi, A., Peng, Y., Ge, G., Khadimallah, M.A. and Yu, S.T. (2021a), "Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors", Smart Struct. Syst., 28(2), 167-180. https://doi.org/10.12989/sss.2021.28.2.167.
  263. Zandi, Y., O zturk, N., O zturk, H.T. and Durmus, A. (2012), "Study of utilization in cement of activated drinking water treatment sludge at various temperatures", Adv. Envir. Biol., 6(11), 2958-2965.
  264. Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D.K. and Khorami, M. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., 28(4), 439-447. https://doi.org/10.12989/scs.2018.28.4.439.
  265. Zhang, C. and Abedini, M. (2022), "Development of PI model for FRP composite retrofitted RC columns subjected to high strain rate loads using LBE function", Eng. Struct., 252, 113580. https://doi.org/10.1016/j.engstruct.2021.113580.
  266. Zhang, X., Shamsodin, M., Wang, H., Noormohammadi Arani, O., Khan, A.M., Habibi, M. and Al-Furjan, M.S.H. (2021a), "Dynamic information of the time-dependent tobullian biomolecular structure using a high-accuracy size-dependent theory", J. Biomol. Struct. Dyn., 39(9), 3128-3143. https://doi.org/10.1080/07391102.2020.1760939
  267. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021b), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Wave. Random Complex Media, 1-24. https://doi.org/10.1080/17455030.2021.1948627.
  268. Zhao, C., Liang, N., Yuan, L. and Zhu, X. (2020), "Factors for the dispersibility of polyvinyl alcohol fiber in aqueous solution", J. Coastal Res., 103(SI), 516-520. https://doi.org/10.2112/SI103-104.1.
  269. Zhao, R., Zhang, L., Guo, B., Chen, Y., Fan, G., Jin, Z. and Zhu, J. (2021a), "Unveiling substitution preference of chromium ions in sulphoaluminate cement clinker phases", Compos. Part B Eng., 222, 109092. https://doi.org/10.1016/j.compositesb.2021.109092.
  270. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. (2021b), "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01242-1.
  271. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv. Nano Res., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295.
  272. Zhu, J., Chen, Y., Zhang, L., Guo, B., Fan, G., Guan, X. and Zhao, R. (2021), "Revealing the doping mechanism of barium in sulfoaluminate cement clinker phases", J. Clean. Prod., 295, 126405. https://doi.org/10.1016/j.jclepro.2021.126405.
  273. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067.