DOI QR코드

DOI QR Code

무인 항공기 공기 흡입구의 복합재 적용 구조 설계 및 해석 연구

A Study on the Structural Design and Analysis of Air Intake of Unmanned Aerial Vehicles Applied to Composite Materials

  • 최희주 (키프코전자항공) ;
  • 박현범 (군산대학교 기계융합시스템공학부 미래형자동차공학전공)
  • 투고 : 2021.07.01
  • 심사 : 2021.12.26
  • 발행 : 2022.02.28

초록

본 연구에서 항공기 엔진의 공기흡입구 복합재 적용 구조 설계 및 해석 연구를 수행하였다. 본 연구에서 설계를 위해 대상 구조물의 구조 설계 요구조건 분석을 수행하였다. 구조 설계 하중은 압력 분포 하중과 가속도 조건을 적용하였다. 구조 설게 결과를 검증하기 위한 구조 안전성 평가를 위해 유한 요소 해석이 수행되었다. 구조 안전성 평가를 위해 응력 해석, 변형 해석, 좌굴 해석이 수행되었다. 최종 구조 안전성 검토를 통해 설계된 공기흡입구는 안전성을 확보한 것으로 확인되었다.

In this study, we conducted a structural design and analysis of air intake of aircraft engine using composite materials. First, an investigation on structural design requirement of target structure was carried out. The distributed pressure load and acceleration condition was applied to structural design. To evaluate the structural design result, finite element analysis was carried out. The stress, deflection and buckling analysis for structural safety evaluation was performed. Finally, it was confirmed that the air intake through structural analysis is safety.

키워드

과제정보

이 논문은 2020학년도 군산대학교 신임교수 연구비 지원에 의하여 연구되었습니다.

참고문헌

  1. Pedro David Bravo-Mosquera, Alvaro Martins Abdalla, Hernan Dario Ceron-Munoz, Fernando Martini Catalano., "Integration assessment of conceptual design and intake aerodynamics of a non-conventional air-to-ground fighter aircraft," Aerospace Science and Technology, Vol. 86, pp. 497-519, 2019. https://doi.org/10.1016/j.ast.2019.01.059
  2. Vittorio Vercillo, Norbert Karpen , Alexandre Laroche, Javier A. M. Guillen, Simone Tonnicchia, Raphael de Andrade Jorge, Elmar Bonaccurso, "Analysis and modelling of icing of air intake protection grids of aircraft engines," Cold Regions Science and Technology, Vol. 160, pp. 265-272, 2019. https://doi.org/10.1016/j.coldregions.2019.01.012
  3. F. Bagnoli, M. Bernabei, A. Ciliberto, "Failure analysis of an aircraft auxiliary power unit air intake door," Engineering Failure Analysis, Vol. 18, pp. 284-294, 2011. https://doi.org/10.1016/j.engfailanal.2010.09.007
  4. Zeyang Zhou, Jun Huang, "Mixed design of radar/infrared stealth for advanced fighter intake and exhaust system," Aerospace Science and Technology, Vol. 110, pp. 106490, 2021. https://doi.org/10.1016/j.ast.2021.106490
  5. Mohammad R Soltani, Javad Sepahi Younsi, Mohammad Farahani, Afshin Masoud, "Numerical simulation and parametric study of a supersonic intake," Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 227, pp. 106490, 2013.
  6. Wenbiao Gan, Xiaocui Zhang, "Design optimization of a three-dimensional diffusing S-duct using a modified SST turbulent model," Aerospace Science and Technology, Vol. 63, pp. 63-72, 2017. https://doi.org/10.1016/j.ast.2016.12.016
  7. H. Kim, M. S. Liou, "Shape design optimization of embedded engine inlets for N2B hybrid wing-body configuration," Aerospace Science and Technology, Vol. 30, pp. 128-149, 2013. https://doi.org/10.1016/j.ast.2013.07.011
  8. Guoping Huang, Fengyuan Zuo, Wenyou Qiao, "Design method of internal waverider inlet under non-uniform upstream for inlet/forebody integration," Aerospace Science and Technology, Vol. 74, pp. 160-172, 2018. https://doi.org/10.1016/j.ast.2018.01.012
  9. Lee M. Berra, John W. Slater, Semih M. Olcmen, "Conceptual redesign of the B-1B bomber inlets for improved supersonic performance," Aerospace Science and Technology, Vol. 45, pp. 476-483, 2015. https://doi.org/10.1016/j.ast.2015.06.017
  10. Shuvayan Brahmachary, Chihiro Fujio, Hideaki Ogawa, "Multi-point design optimization of a high-performance intake for scramjet-powered ascent flight," Aerospace Science and Technology, Vol. 107, pp. 106362, 2020. https://doi.org/10.1016/j.ast.2020.106362
  11. Bae, H., Lee, S., Kim, Y., Jeong, I., Lee, S., Cho, D., "Probabilistic Approach for Fighter Inlet Hammershock Design Pressure," Journal of Aerospace System Engineering, Vol. 13, No. 5, pp. 72-78, 2019. https://doi.org/10.20910/JASE.2019.13.5.72
  12. Lee, J., Lee, K., Kho, S., Kwak, J., "Inlet distortion test of gas turbine engine," Journal of Aerospace System Engineering, Vol. 1, No. 1, pp. 53-59, 2007.
  13. Kang, M., Park, D., Kang, H., Lee, S., "Performance Analysis based on Impller Inlet & Outlet Angle for Waterjet," Journal of Aerospace System Engineering, Vol. 5, No. 2, pp. 27-32, 2011. https://doi.org/10.20910/JASE.2011.5.2.027