Geomechanics and Engineering

  • 제28권5호
  • /
  • Pages.493-503
  • /
  • 2022
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Drained cylindrical cavity expansion in K0-consolidated anisotropic soils under biaxial in-situ stresses

  • Cao, Xiaobing (Department of Geotechnical Engineering, Tongji University) ;
  • Zhang, Junran (Henan Province Key Laboratory of Geomechanics and Structural Engineering, North China University of Water Resources and Electric Power) ;
  • Sun, De'an (Department of Civil Engineering, Shanghai University)
  • 투고 : 2021.09.03
  • 심사 : 2022.01.22
  • 발행 : 2022.03.10
⟨ 이전 논문 다음 논문 ⟩

초록

Cavity expansion is a classical problem in the field of solid mechanics with a wide range of applications in geotechnical and petroleum engineering. A drained solution is developed for cylindrical cavity expansion in anisotropic soils under biaxial in-situ stresses using a K0-based anisotropic modified Cam-clay model (K0-AMCC). The problem is formulated by solving differential equations using an auxiliary variable, which provides analytical expressions for the volume and four stress components of the soil around the cylindrical cavity. The solution is validated by comparisons with existing well-developed solutions. The results show that the present solution well captures the cavity expansion responses in anisotropic soils under biaxial in-situ stresses, and removes limiting assumptions that the cylindrical cavity expands under uniform in-situ stress in isotropic soils. The elastic-plastic boundary of the expanding cylindrical cavity in K0-consolidated anisotropic soils under biaxial in-situ stresses is a circle rather than an ellipse in isotropic soils, and the mathematical proof is provided in detail.

키워드

과제정보

This study is financially supported by the National Natural Science Foundation of China (Grant No. 41602295), the Foundation for University Key Teacher by the Ministry of Education of Henan Province (Grant No. 2020GGJS-094), and the Key Scientific Research Projects of Colleges and Universities in Henan Province (Grant No. 21A410002).

참고문헌

  1. Cao, L.F., The, C.I. and Chang M.F. (2002), "Analysis of undrained cavity expansion in elasto-plastic soils with non-linear elasticity", Int. J. Numer. Anal. Method. Geomech., 26(1), 25-52. https://doi.org/10.1002/nag.189.
  2. Carter, J.P., Booker, J.R. and Yeung, S.K. (1986), "Cavity expansion in cohesive frictional soils", Geotechnique, 36(3), 349-358. https://doi.org/10.1680/geot.1986.36.3.349.
  3. Collins, I.F. and Yu, H.S. (1996), "Undrained cavity expansion in critical state soils", Int. J. Numer. Anal. Method. Geomech., 20(7), 489-516. https://doi.org/10.1002/(SICI)1096-9853(199607)20:7<489::AID-NAG829>3.0.CO;2-V.
  4. Chang, M.F., Teh, C.I. and and Cao, L.F. (2001), "Undrained cavity expansion in modified Cam clay II: Application to the interpretation of the piezocone test", Geotechnique, 51(4), 335-350. https://doi.org/10.1680/geot.2001.51.4.335.
  5. Chen, H.H., Feng, C., Li, J.P. and Sun, D.A. (2021), "Analysis of cylindrical cavity expansion in anisotropic overconsolidated clays using the Extended UH model", Comput. Geotechnics, 134(3), 104-114. https://doi.org/10.1016/j.compgeo.2021.104114.
  6. Chen, S.L. and Abousleiman, Y.N. (2013), "Exact drained solution for cylindrical cavity expansion in modified Cam Clay soil", Geotechnique, 63(6), 510-517. https://doi.org/10.1680/geot.11.P.088.
  7. Gong, W., Li, J., Li, L. and Zhang, S. (2017), "Evolution of mechanical properties of soils subsequent to a pile jacked in natural saturated clays", Ocean Eng., 136, 209-217. https://doi.org/10.1016/j.oceaneng.2017.03.020.
  8. Lame, G. (1852), Lecons sur la theorie mathematique de l'elasticite des corps solides. Bachelier, Paris. (in French)
  9. Li, Chao., Zou J.F. and A S.G. (2019), "Closed-form solution for undrained cavity expansion in anisotropic soil mass based on spatially mobilized plane failure criterion", Int. J. Geomech., 19(7), 04019075. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001458.
  10. Li, L., Xiang, Z.C., Zou, J.F. and Wang, F. (2019), "An improved model of compaction grouting considering three- dimensional shearing failure and its engineering application", Geomech. Eng., 19(3), 217-227. https:/doi.org/10.12989/gae.2019.19.3.217.
  11. Li, L., Gong, W. and Li, J. (2020), "Effects of clay creep on longterm load carrying behaviours of bored piles: aiming at reusing existing bored piles", Int. J. Geomech., 20(8), 04020132. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001769.
  12. Liu, K. and Chen, S.L. (2019), "Analysis of cylindrical cavity expansion in anisotropic critical state soils under drained conditions", Can. Geotech. J., 56(5), 675-686. https://doi.org/10.1139/cgj-2018-0025.
  13. Roscoe, K. and Burland, J.B. (1968), On the generalized stressstrain behaviour of wet clay. Engineering Plasticity, Cambridge University Press.
  14. Russell, A.R. and Khalili, N. (2002), "Drained cavity expansion in sands exhibiting particle crushing", Int. J. Numer. Anal. Method. Geomech., 26(4), 323-340. https://doi.org/10.1002/nag.203.
  15. Salgado, R. and Prezzi M. (2007), "Computation of cavity expansion pressure and penetration resistance in sands", Int. J. Geomech., 7(4), 251-265. https://doi.org/10.1061/(ASCE)1532-3641(2007)7:4(251).
  16. Sekiguchi, H. and Ohta, H. (1977), "Induced anisotropy and time dependency in clays", Proceedings of the Specialty Session 9, 9th ICSMFE, Tokyo. https://doi.org/10.1007/978-1-4613-4202-1_17.
  17. Sivasithamparam, N. and Castro, J. (2020), "Undrained cylindrical cavity expansion in clays with fabric anisotropy and structure: Theoretical solution", Comput. Geotechnics, 120(3), 103386. https://doi.org/10.1016/j.compgeo.2019.103386.
  18. Sun, D.A, Matsuoka, H, Yao, Y.P. and Ishii, H. (2004), "An anisotropic hardening elastoplastic model for clays and sands and its application to FE analysis", Comput. Geotechnics, 31(1), 37-46. https://doi.org/10.1016/j.compgeo.2003.11.003.
  19. Tan, Y.Z., Xu X., Ming H.J. and Sun D.A. (2022), "Analysis of double-layered buffer in high-level waste repository", Annal. Nuclear Energy, 165, 108660. https://doi.org/10.1016/j.anucene.2021.108660.
  20. Timoshenko, S.P. and Goodier, J.N. (1970), "Theory of elasticity", McGraw-Hill, New York, USA.
  21. Vrakas, A. and Anagnostou, G. (2015), "A simple equation for obtaining finite strain solutions from small strain analyses of tunnels with very large convergences", Geotechnique, 65(11), 738-761. https://doi.org/10.1680/geot.15.P.036.
  22. Wood, D.M. (1990), Soil behaviour and critical state soil mechanics, Cambridge University Press, Cambridge, UK.
  23. Wang, Y., Li, L. and Li, J.P. (2021), "A similarity solution for undrained expansion of a cylindrical cavity in K0-consolidated anisotropic soils", Geomech. Eng., 25(4), 303-315. https://doi.org/10.12989/gae.2021.25.4.303.
  24. Yang, C., Gong, W., Li, J. and Gu, X. (2020), "Drained cylindrical cavity expansion in modified Cam-clay soil under biaxial in-situ stresses", Comput. Geotechnics, 121(4), 103494. https://doi.org/10.1016/j.compgeo.2020.103494.
  25. Yu, H.S. (2000), "Cavity expansion methods in geomechanics", Kluwer Academic Publishers, Dordrecht, Netherlands. https://doi.org/10.1007/978-94-015-9596-4.
  26. Zhuang, P.Z. and Yu, H.S. (2019), "A unified analytical solution for elastic-plastic stress analysis of a cylindrical cavity in Mohr-Coulomb materials under biaxial in situ stresses", Geotechnique, 69(4), 369-376. https://doi.org/10.1680/jgeot.17.p.281.
  27. Zhou, H., Kong, G., Liu, H. and Laloui, L. (2018), "Similarity solution for cavity expansion in thermoplastic soil", Int. J. Numer. Anal. Method. Geomech., 42(2), 274-294. https://doi.org/10.1002/nag.2724.
  28. Zhou, X.Y., He, L.Q. and Sun, D.A. (2022), "Three-dimensional thermal modeling and dimensioning design in the nuclear waste repository", Int. J. Numer. Anal. Method. Geomech., 46(4), 779-797. https://doi.org/10.1002/nag.3321