Advances in nano research

  • 제12권2호
  • /
  • Pages.151-165
  • /
  • 2022
  • /
  • 2287-237X(pISSN)
  • /
  • 2287-2388(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Exploring precise deposition and influence mechanism for micro-scale serpentine structure fiber

  • Wang, Han (State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology) ;
  • Ou, Weicheng (State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology) ;
  • Zhong, Huiyu (Guangdong Provincial Key Laboratory of Micro-Nano Manufacturing Technology and Equipment, Guangdong University of Technology) ;
  • He, Jingfan (State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology) ;
  • Wang, Zuyong (College of Materials Science and Engineering, College of Biology, Hunan University) ;
  • Cai, Nian (State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology) ;
  • Chen, XinDu (State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology) ;
  • Xue, Zengxi (State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology) ;
  • Liao, Jianxiang (Guangdong Foshan Nanofiberlabs Co., Ltd) ;
  • Zhan, Daohua (State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology) ;
  • Yao, Jingsong (State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology) ;
  • Wu, Peixuan (State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology)
  • 투고 : 2021.06.27
  • 심사 : 2021.11.11
  • 발행 : 2022.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Micro-scale serpentine structure fibers are widely used as flexible sensor in the manufacturing of micro-nano flexible electronic devices because of their outstanding non-linear mechanical properties and organizational flexibility. The use of melt electrowriting (MEW) technology, combined with the axial bending effect of the Taylor cone jet in the process, can achieve the micro-scale serpentine structure fibers. Due to the interference of the process parameters, it is still challenging to achieve the precise deposition of micro-scale and high-consistency serpentine structure fibers. In this paper, the micro-scale serpentine structure fiber is produced by MEW combined with axial bending effect. Based on the controlled deposition of MEW, applied voltage, collector speed, nozzle height and nozzle diameter are adjusted to achieve the precise deposition of micro-scale serpentine structure fibers with different morphologies in a single motion dimension. Finally, the influence mechanism of the above four parameters on the precise deposition of micro-scale serpentine fibers is explored.

키워드

과제정보

This work was financially supported by National Natural Science Foundation of China (U20A6004).

참고문헌

  1. Baji, A. and Abtahi, M. (2013), "Fabrication of barium titanate-bismuth ferrite fibers using electrospinning", Adv. Nano Res., 1(4), 183-192. http://doi.org/10.12989/anr.2013.1.4.183.
  2. Chinnappan, A., Baskar, C., Baskar, S., Ratheesh, G. and Ramakrishna, S. (2017), "An overview of electrospun nanofibers and their application in energy storage, sensors and wearable/flexible electronics", J. Mater. Chem. C, 5(48), 12657-12673. https://doi.org/10.1039/C7TC03058D.
  3. Choi, M.K., Yang, J., Kang, K., Kim, D.C., Choi, C., Park, C., Kim, S.J., Chae, S.I., Kim, T.H., Kim, J.H., Hyeon, T. and Kim, D.H. (2015), "Wearable red-green-blue quantum dot light-emitting diode array using high-resolution intaglio transfer printing", Nat. Commun., 6(1), 1-8. https://doi.org/10.1038/ncomms8149.
  4. Dhanawansha, K.B., Senadeera, R., Gunathilake, S.S. and Dassanayake, B.S. (2020), "Silver nanowire-containing wearable thermogenic smart textiles with washing stability", Adv. Nano Res., 9(2), 123-131. https://doi.org/10.12989/anr.2020.9.2.123.
  5. Duan, H., Xie, E., Han, L. and Xu, Z. (2008), "Turning PMMA nanofibers into graphene nanoribbons by in situ electron beam irradiation", Adv. Mater., 20(17), 3284-3288. https://doi.org/10.1002/adma.200702149.
  6. Duan, Y., Ding, Y., Xu, Z., Huang, Y. and Yin, Z. (2017), "Helix electrohydrodynamic printing of highly aligned serpentine micro/nanofibers", Polymers, 9(9), 434. https://doi.org/10.3390/polym9090434.
  7. Fang, F., Chen, X., Du, Z., Zhu, Z., Chen, X., Wang, H. and Wu, P. (2015), "Controllable direct-writing of serpentine micro/nano structures via low voltage electrospinning", Polymers, 7(8), 1577-1586. https://doi.org/10.3390/polym7081471.
  8. Gao, W., Ota, H., Kiriya, D., Takei, K. and Javey, A. (2019), "Flexible electronics toward wearable sensing", Acc. Chem. Res., 52(3), 523-533. https://doi.org/10.1021/acs.accounts.8b00500.
  9. Huang, L., Wang, H., Zhan, D. and Fang, F. (2021), "Flexible capacitive pressure sensor based on laser-induced graphene and polydimethylsiloxane foam", IEEE Sens. J., 21(10), 12048-12056. https://doi.org/10.1109/JSEN.2021.3054985.
  10. Huang, S., Liu, Y., Zhao, Y., Ren, Z. and Guo, C.F. (2019), "Flexible electronics: Stretchable electrodes and their future", Adv. Funct. Mater., 29(6), 1805924. https://doi.org/10.1002/adfm.201805924.
  11. Huang, Y., Bai, X., Zhou, M., Liao, S., Yu, Z., Wang, Y. and Wu, H. (2016), "Large-scale spinning of silver nanofibers as flexible and reliable conductors", Nano Lett., 16(9), 5846-5851. https://doi.org/10.1021/acs.nanolett.6b02654.
  12. Huang, Y., Ding, Y., Bian, J., Su, Y., Zhou, J., Duan, Y. and Yin, Z. (2017), "Hyper-stretchable self-powered sensors based on electrohydrodynamically printed, self-similar piezoelectric nano/microfibers", Nano Energy, 40, 432-439. https://doi.org/10.1016/j.nanoen.2017.07.048.
  13. Huang, Y., Song, J., Yang, C., Long, Y. and Wu, H. (2019), "Scalable manufacturing and applications of nanofibers", Mater. Today, 28, 98-113. https://doi.org/10.1016/j.mattod.2019.04.018.
  14. Kong, T., Li, J., Liu, Z., Zhou, Z., Ng, P.H.Y., Wang, L. and Shum, H. C. (2016), "Rapid mixing of viscous liquids by electrical coiling", Sci. Rep., 6(1), 1-8. https://doi.org/10.1038/srep19606.
  15. Kou, L., Huang, T., Zheng, B., Han, Y., Zhao, X., Gopalsamy, K., Sun, H. and Gao, C. (2014), "Coaxial wet-spun yarn supercapacitors for high-energy density and safe wearable electronics", Nat. Commun., 5(1), 1-10. https://doi.org/10.1038/ncomms4754.
  16. Luelf, T., Bremer, C. and Wessling, M. (2016), "Rope coiling spinning of curled and meandering hollow-fiber membranes", J. Membr. Sci., 506, 86-94. https://doi.org/10.1016/j.memsci.2016.01.037.
  17. Matsumoto, H., Minami, H., Yamaura, I. and Yoshida, Y. (2019), "Postoperative subdural hematoma with blood flow from an epidural hematoma through a tear at the suture point of an artificial dura substitute", Acta Neurochir., 161(4), 755-760. https://doi.org/10.1007/s00701-019-03830-7.
  18. Nag, A., Mukhopadhyay, S.C. and Kosel, J. (2017), "Wearable flexible sensors: A review", IEEE Sens. J., 17(13), 3949-3960. https://doi.org/10.1109/JSEN.2017.2705700.
  19. Nayak, L., Mohanty, S., Nayak, S.K. and Ramadoss, A. (2019), "A review on inkjet printing of nanoparticle inks for flexible electronics", J. Mater. Chem. C, 7(29), 8771-8795. https://doi.org/10.1039/C9TC01630A.
  20. Nezadi, M., Keshvari, H. and Yousefzadeh, M. (2021), "Using Taguchi design of experiments for the optimization of electrospun thermoplastic polyurethane scaffolds", Adv. Nano Res., Int. J., 10(1), 59-69. http://doi.org/10.12989/anr.2021.10.1.059.
  21. Passieux, R., Guthrie, L., Rad, S.H., Levesque, M., Therriault, D. and Gosselin, F.P. (2015), "Instability-assisted direct writing of microstructured fibers featuring sacrificial bonds", Adv. Mater., 27(24), 3676-3680. https://doi.org/10.1002/adma.201500603.
  22. Persano, L., Camposeo, A. and Pisignano, D. (2015), "Active polymer nanofibers for photonics, electronics, energy generation and micromechanics", Prog. Polym. Sci., 43, 48-95. https://doi.org/10.1016/j.progpolymsci.2014.10.001.
  23. Ramakrishna, S., Fujihara, K., Teo, W.E., Yong, T., Ma, Z. and Ramaseshan, R. (2006), "Electrospun nanofibers: Solving global issues", Mater. Today, 9(3), 40-50. https://doi.org/10.1016/S1369-7021(06)71389-X.
  24. Romagnoli, P., Maeda, M., Ward, J.M., Truong, V.G. and Nic Chormaic, S. (2020), "Fabrication of optical nanofibre-based cavities using focussed ion-beam milling: A review", Appl. Phys. B Lasers O., 126, 1-16. https://doi.org/10.1007/s00340-020-07456-x.
  25. Shariatpanahi, S.P., Bonn, D., Ejtehadi, M.R. and Zad, A.I. (2016), "Electrical bending instability in electrospinning visco-elastic solutions", J. Polym. Sci. Pol. Phys., 54(11), 1036-1042. https://doi.org/10.1002/polb.24029.
  26. Wang, X., Xu, L., Zheng, G., Jiang, J., Sun, D. and Li, W. (2021), "Formation of suspending beads-on-a-string structure in electro-hydrodynamic printing process", Mater. Des., 204, 109692. https://doi.org/10.1016/j.matdes.2021.109692.
  27. Wu, C.C., Reinhoudt, D.N., Otto, C., Subramaniam, V. and Velders, A.H. (2011), "Strategies for patterning biomolecules with dip-pen nanolithography", Small, 7(8), 989-1002. https://doi.org/10.1002/smll.201001749.
  28. Yang, W.M., Zhu, T.K., Jin, Y.A. and Fu, J.Z. (2017), "Facile fabrication of helical microfluidic channel based on rope coiling effect", Microsyst. Technol., 23(7), 2957-2964. https://doi.org/10.1007/s00542-016-3010-4.
  29. Zhang, C.L., Luo, Y.X., Cheng, R.R. and Wang, X.Y. (2017), "Electromechanical fields in piezoelectric semiconductor nano-fibers under an axial force", MRS Adv., 2(56), 3421-3426. https://doi.org/10.1557/adv.2017.301.
  30. Zhang, Y.Z., Wang, Y., Cheng, T., Yao, L. Q., Li, X., Lai, W.Y. and Huang, W. (2019), "Printed supercapacitors: Materials, printing and applications", Chem. Soc. Rev., 48(12), 3229-3264. https://doi.org/10.1039/C7CS00819H.
  31. Zheng, G., Jiang, J., Wang, X., Li, W., Yu, Z. and Lin, L. (2021), "High-aspect-ratio three-dimensional electrospinning via a tip guiding electrode", Mater. Des., 198, 109304. https://doi.org/10.1016/j.matdes.2020.109304.
  32. Zhu, Z., Chen, X., Huang, S., Du, Z., Liao, W., Fang, F., Peng, D. and Wang, H. (2015), "The process of wavy fiber deposition via auxiliary electrodes in near-field electrospinning", Appl. Phys. A, 120(4), 1435-1442. https://doi.org/10.1007/s00339-015-9330-x.