Structural Engineering and Mechanics

  • 제81권4호
  • /
  • Pages.493-502
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Shear lag coefficient of angles with bolted connections including equal and different legs through finite element method

  • Shahbazi, Lida (Department of Civil Engineering, Islamic Azad University - Nour Branch) ;
  • Rahimi, Sepideh (Department of Civil Engineering, Islamic Azad University - Nour Branch) ;
  • Hoseinzadeh, Mohamad (Department of Civil Engineering, Islamic Azad University - Nour Branch) ;
  • Rezaieaan, Ramzan (Department of Civil Engineering, Islamic Azad University - Nour Branch)
  • 투고 : 2021.06.10
  • 심사 : 2021.11.16
  • 발행 : 2022.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Shear lag phenomenon has long been considered in numerous structural codes; however, the AISC provisions have now no longer proposed any unique equation to calculate the shear lag ratio in bolted connections for angles in general. It is noticeable that, however, codes used in this case are largely conservative and need to be amended. A parametric study consisting of 27 angle sections with equal legs and different with bolted connections was performed to investigate the effects of shear lag on the ultimate tensile capacity of angle members. The main parameters were: steel grade, connection length and eccentricity from the center of the plate, as well as the number of rows of bolts parallel to the applied force. The test results were compared with the predictions of the classical 1-x/l law proposed by Mons and Chesen to investigate its application to quantify the effect of shear lag. A parametric study was performed using valid FE models that cover a wide range of parameters. Finally, based on the numerical results, design considerations were proposed to quantify the effect of shear lag on the ultimate tensile capacity of the tensile members.

키워드

참고문헌

  1. ABAQUS (2013), Analysis User's Manual, Version 6, Dassault Systemes Simulia, Inc.
  2. Adewole, K.K. and Teh, L.H. (2017), "Predicting steel tensile responses and fracture using the phenomenological ductile shear fracture model", J. Mater. Civil Eng., 29(12), 06017019. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002094.
  3. AISC (2005), Specifications for Structural Steel Buildings, ANSI/-AISC360-05, Chicago, USA.
  4. Bao, Y. and Wierzbicki, T. (2004), "On fracture locus in the equivalent strain and stress triaxiality space", Int. J. Mech. Sci., 46(1), 81-98. https://doi.org/10.1016/j.ijmecsci.2004.02.006.
  5. Barkhori, M., Maleki, S., Mirtaheri, M., Nazeryan, M. and Kolbadi, S.M.S. (2020), "Investigation of shear lag effect on tension members fillet-welded connections consisting of single and double channel sections", Struct. Eng. Mech., 74(3), 445-455. http://doi.org/10.12989/sem.2020.74.3.445.
  6. Chandak, R., Upadhyay, A. and Bhargava, P. (2008), "Shear lag prediction in symmetrical laminated composite box beams using artificial neural network", Struct. Eng. Mech., 29(1), 77-89. http://doi.org/10.12989/sem.2008.29.1.077.
  7. Chen, S., Qian, X. and Ahmed, A. (2016), "Cleavage fracture assessment for surface-cracked plates fabri-cated from high strength steels", Eng. Fract. Mech., 161, 1-20. https://doi.org/10.1016/j.engfracmech.2016.04.039.
  8. Coelho, A.M.G. and Bijlaard, F.S.K. (2007), "Experimental behaviour of high strength steel endplate con-nections", J. Constr. Steel Res., 63(9), 1228-1240. https://doi.org/10.1016/j.jcsr.2006.11.010.
  9. Daidie, A., Chakhari, J. and Zghal, A. (2007), "Numerical model for bolted T-stubs with two bolt rows", Struct. Eng. Mech., 26(3), 343-361. http://doi.org/10.12989/sem.2007.26.3.343.
  10. Dusicka, P. and Lewis, G. (2010), "High strength steel bolted connections with filler plates", J. Constr. Steel Res., 66(1), 75-84. https://doi.org/10.1016/j.jcsr.2009.07.017.
  11. Easterling, W.S. and Gonzales, L. (1993), "Shear lag effects in steel tension members", AISC J. Eng., 30(2), 77-89.
  12. Fang, C., Lam, A.C. and Yam, M.C. (2013), "Influence of shear lag on ultimate tensile capacity of angles and tees", J. Constr. Steel Res., 84, 49-61. https://doi.org/10.1016/j.jcsr.2013.02.006.
  13. Gaylord, E.H. Jr, Gaylord, C.N. and Stallmeyer, J.E. (1992), Design of Steel Structures, 3rd Edition, McGrow Hill, New York.
  14. Hui, G. (2005), "Shear lag effects on welded hot-rolled steel channels in tension", Master of Science Thesis, University of Alberta, Canada.
  15. Humphries, M.J.R. and Birkemoe, P.C. (2004), "Shear lag effects in fillet-welded tension connections of channels and similar shapes", Proceedings of the ECCS/AISC Workshop on Connections in Steel Structures V: Innovative Steel Connections, Amsterdam, June.
  16. Ke, K. and Chen, Y. (2016), "Seismic performance of MRFs with high strength steel main frames and EDBs", J. Constr. Steel Res., 126, 214-228. https://doi.org/10.1016/j.jcsr.2016.07.003.
  17. Kiymaz, G. and Seckin, E. (2014), "Behavior and design of stainless-steel tubular member welded end connections", Steel Compos. Struct., 17(3), 253-269. http://doi.org/10.12989/scs.2014.17.3.253.
  18. Luo, D., Zhang, Z. and Li, B. (2019), "Shear lag effect in steel-concrete composite beam in hogging moment", Steel Compos. Struct., 31(1), 27-41. http://doi.org/10.12989/scs.2019.31.1.027.
  19. Marsh, C. (1969), "Single angles in tension and compression", J. Struct. Div., 95, 1043-1049. https://doi.org/10.1061/JSDEAG.0006144.
  20. Mirtaheri, S.M., Nazeryan, M., Bahrani, M.K., Nooralizadeh, A., Montazerian, L. and Naserifard, M. (2017), "Local and global buckling condition of all-steel buckling restrained braces", Steel Compos. Struct., 23(2), 217-228. http://doi.org/10.12989/scs.2017.23.2.217.
  21. Moze, P. and Beg, D. (2010), "High strength steel tension splices with one or two bolts", J. Constr. Steel Res., 66(8), 1000-1010. https://doi.org/10.1016/j.jcsr.2010.03.009.
  22. Munse, W.H. and Chesson Jr, E. (1963), "Riveted and bolted joints: net section design", J. Struct. Div., 89(1), 107-126. https://doi.org/10.1061/JSDEAG.0000869.
  23. Orbison, J.G., Wagner, M.E. and Fritz, W.P. (1999), "Tension plane behavior in single-row bolted connections subject to block shear", J. Constr. Steel Res., 49(3), 225-239. https://doi.org/10.1016/S0143-974X(98)90172-9.
  24. Qian, X., Li, Y. and Zhao, O. (2013), "Ductile tearing assessment of high-strength steel X-joints under in-plane bending", Eng. Fail. Anal., 28(2), 176-191. https://doi.org/10.1016/j.engfailanal.2012.10.017.
  25. Wang, J., Afshan, S. and Gardner, L. (2017), "Axial behaviour of prestressed high strength steel tubular members", J. Constr. Steel Res., 133, 547-563. https://doi.org/10.1016/j.jcsr.2017.03.002.
  26. Zahiri-Hashemi, R., Kheyroddin, A. and Farhadi, B. (2013), "Effective number of mega-bracing, in order to minimize shear lag", Struct. Eng. Mech., 48(2), 173-193. http://doi.org/10.12989/sem.2013.48.2.173.
  27. Zhang, J., Han, B., Xie, H., Yan, W., Li, W. and Yu, J. (2021), "Analysis of shear lag effect in the negative moment region of steel-concrete composite beams under fatigue load", Steel Compos. Struct., 39(4), 435. http://doi.org/10.12989/scs.2021.39.4.435.
  28. Zhong, X., Zhang, T., Shu, X. and Xu, H. (2017), "Shear-lag behavior of prestressed concrete box-girder bridges during balanced cantilever construction", Adv. Concrete Constr., 5(5), 469. http://doi.org/10.12989/acc.2017.5.5.469.