Structural Engineering and Mechanics

  • 제81권3호
  • /
  • Pages.317-333
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Cyclic testing of a new visco-plastic damper subjected to harmonic and quasi-static loading

  • Modhej, Ahmad (Department of Civil Engineering, Qazvin Branch, Islamic Azad University) ;
  • Zahrai, Seyed Mehdi (School of Civil Engineering, College of Engineering, University of Tehran)
  • 투고 : 2021.09.20
  • 심사 : 2021.11.02
  • 발행 : 2022.02.10
⟨ 이전 논문 다음 논문 ⟩

초록

Visco-Plastic Damper (VPD) as a passive energy dissipation device with dual behavior has been recently numerically studied. It consists of two bent steel plates and segments with a viscoelastic solid material in between, combining and improving characteristics of both displacement-dependent and velocity-dependent devices. In order to trust the performance of VPD, for the 1st time this paper experimentally investigates prototype damper behavior under a wide range of frequency and amplitude of dynamic loading. A high-axial damping rubber is innovatively proposed as the viscoelastic layer designed to withstand large axial strains and dissipate energy accordingly. Test results confirmed all assumptions about VPD. The behavior of VPD subjected to low levels of excitation is elastic while with increasing levels of excitation, a significant source of energy dissipation is provided through the yielding of the steel elements in addition to the viscoelastic energy dissipation. The results showed energy dissipation of 99.35 kN.m under a dynamic displacement with 14.095 mm amplitude and 0.333 Hz frequency. Lateral displacement at the middle of the device was created with an amplification factor obtained ranging from 2.108 to 3.242 in the rubber block. Therefore, the energy dissipation of viscoelastic material of VPD was calculated 18.6 times that of the ordinary viscoelastic damper.

키워드

참고문헌

  1. Aghlara, R., Tahir, M. and Adnan, A. (2015), "Comparative study of eight metalic yielding dampers", J. Teknology, 77(16), 119-125. https://doi.org/10.11113/jt.v77.6408.
  2. Castaldo, P. (2014), Integrated Seismic Design of Structure and Control Systems, Springer International Publishing, New York, NY, USA.
  3. Castaldo, P. and de Iuliis, M. (2014), "Optimal integrated seismic design of structural and viscoelastic bracing-damper systems", Earthq. Eng. Struct. Dyn., 43(12), 1809-1827. https://doi.org/10.1002/eqe.2425.
  4. Chang, K.C., Tsai, M.H. and Lai, M. (2001), "Shaking table study of a 2/5 scale steel frame with new viscoelastic dampers", Struct. Eng. Mech., 11(3), 273-286. https://doi.org/10.12989/sem.2001.11.3.273.
  5. Charney, F. and Ibrahim, Y. (2004), "A new "Visco-Plastic" passive energy device", 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada.
  6. FEMA461 (2007), Interim Testing Protocols for Determining the Seismic Performance Characteristics of Structural and Nonstructural Components (FEMA461), Federal Emergency Management Agency Department of Homeland Security (DHS), Washington, D.C.
  7. Hibbitt, K. and Sorensen, Inc. (2002), ABAQUS/Standard User's Manual, Pawtuckett, RI.
  8. Ibrahim, Y. (2005), "A new visco-plastic device for seismic protection of structures", Doctoral Dissertation, Virginia Tech., Virginia.
  9. Lewandowski, R. (2017), "Parameters identification of fractional models of viscoelastic dampers and fluids", Struct. Eng. Mech., 63(2), 181-193. https://doi.org/10.12989/sem.2017.63.2.181.
  10. Lewandowski, R., Bartkowiak, A. and Maciejewski, H. (2012), "Dynamic analysis of frames with viscoelastic dampers: A comparison of damper models", Struct. Eng. Mech., 41(1), 113-137. https://doi.org/10.12989/sem.2012.41.1.113.
  11. MagarPatil, H. and Jangid, R. (2015), "Development and analysis of passive hybrid energy dissipation system for steel moment resisting frame", Int. J. Civil Struct. Eng., 5(4), 339-352. https://doi.org/10.6088/ijcser.2014050031.
  12. Marshall, J. and Charney, F. (2008), "Development and analysis of a hybrid passive control device", The 14th World Conference on Earthquake Engineering, Beijing, China.
  13. Min, K., Kim, J. and Lee, S. (2004), "Vibration tests of 5-story steel frame with viscoelastic dampers", Eng. Struct., 26(6), 831-839. https://doi.org/10.1016/j.engstruct.2004.02.004.
  14. Modhej, A. and Zahrai, S. (2019), "Experimental study of High Axial Damping Rubber (HADR) in new viscoelastic dampers", J. Test. Eval., 48(6), 4387-4401. https://doi.org/10.1520/JTE20180104.
  15. Modhej, A. and Zahrai, S. (2021), "Numerical study of viscohyperelastic damper with high axial damping rubber subjected to harmonic loading", Struct., 29(1), 1550-1561. https://doi.org/10.1016/j.istruc.2020.12.033.
  16. Palazzo, B., Castaldo, P. and Marino, I. (2015), "The dissipative column: A new hysteretic damper", Build., 5(1), 163-178. https://doi.org/10.3390/buildings5010163.
  17. Priestley, M. (1993), "Myths and fallacies in earthquake engineering-conflicts between design and reality", ACI Spec. Public., 157, 231-254.
  18. Qian, H., Li, H., Song, G. and Guo, W. (2013), "Recentering shape memory alloy passive damper for structural vibration control", Math. Prob. Eng., 2013, Article ID 963530, https://doi.org/10.1155/2013/963530.
  19. Qu, J. and Li, H. (2012), "Optimal placement of passive energy dissipation devices by genetic algorithms", Math. Prob. Eng., 2012, Article ID 474282, https://doi.org/10.1155/2012/474282.
  20. Quigley, C.J., Mead, J. and Johnson, A.R. (1994), "Large strain viscoelastic constitutive models for rubber, Part II: Determination of material constants", Rub. Chem. Technol., 68(2), 230-247. https://doi.org/10.5254/1.3538738.
  21. Shedbale, N. and Muley, P. (2017), "Review on viscoelastic materials used in viscoelastic damper", Int. Res. J. Eng. Technol. (IRJET), 4(7), 3375-3381.
  22. Sigaher, A. and Constantinou, M. (2003), "Scissor-Jack-damper energy dissipation system", Earthq. Spectra, 19(1), 133-158. https://doi.org/10.1193/1.1540999.
  23. Symans, M., Charney, F., Whittaker, A., Constantinou, M., Kicher, C., Johnson, M. and McNamara, R. (2008), "Energy dissipation system for seismic applications: Current practise and recent developments", J. Struct. Eng., 134(1), 3-21. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(3).
  24. Tchamo, J. and Ying, Z. (2018), "An alternative practical design method for structures with viscoelastic dampers", Earthq. Eng. Eng. Vib., 17(3), 459-473. https://doi.org/10.1007/s11803-018-0455-8.
  25. Umachagi, V., Venkataramana, K., Reddy, G. and Verma, R. (2013), "Applications of dampers for vibration control of structures: An overview", J. Res. Eng. Technol., 6-11.
  26. Wada, A., Watanabe, A., Connor, J., Kawai, H. and Iwata, M. (1992), "Damage tolerant structures", Proceeding of the Fifth U.S.-Japan Workshop on the Improvement of Building Structural Design and Construction Procedures, ATC-15, San Diego, CA, USA.
  27. Zahrai, S. and Jalali, M. (2014), "Experimental and analytical investigations on seismic behavior of ductile steel knee braced frames", Steel Compos. Struct., 16(1), 1-21. http://doi.org/10.12989/scs.2014.16.1.001.
  28. Zhang, C., Zhou, Y., Weng, D., Lu, D. and Wu, C. (2015), "A methodology for design of metallic dampers in retrofit of earthquake-damaged frame", Struct. Eng. Mech., 56(4), 569-588. http://doi.org/10.12989/sem.2015.56.4.569.
  29. Zhou, Y., Shi, F., Ozbulut, O., Xu, H. and Zi, D. (2017), "Experimental characterization and analytical modeling of a large-capacity high-damping rubber damper", Struct. Control Hlth. Monit., 1-17. https://doi.org/10.1002/stc.2183.