Steel and Composite Structures

  • 제42권2호
  • /
  • Pages.277-288
  • /
  • 2022
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Impact response of a novel flat steel-concrete-corrugated steel panel

  • Lu, Jingyi (Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin Institute of Technology) ;
  • Wang, Yonghui (Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin Institute of Technology) ;
  • Zhai, Ximei (Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin Institute of Technology) ;
  • Zhou, Hongyuan (Key Lab of Urban Security and Disaster Engineering of Ministry of Education, Beijing University of Technology)
  • 투고 : 2021.03.25
  • 심사 : 2022.01.28
  • 발행 : 2022.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

A novel flat steel plate-concrete-corrugated steel plate (FS-C-CS) sandwich panel was proposed for resisting impact load. The failure mode, impact force and displacement response of the FS-C-CS panel under impact loading were studied via drop-weight impact tests. The combined global flexure and local indentation deformation mode of the FS-C-CS panel was observed, and three stages of impact process were identified. Moreover, the effects of corrugated plate height and steel plate thickness on the impact responses of the FS-C-CS panels were quantitatively analysed, and the impact resistant performance of the FS-C-CS panel was found to be generally improved on increasing corrugated plate height and thickness in terms of smaller deformation as well as larger impact force and post-peak mean force. The Finite Element (FE) model of the FS-C-CS panel under impact loading was established to predict its dynamic response and further reveal its failure mode and impact energy dissipation mechanism. The numerical results indicated that the concrete core and corrugated steel plate dissipated the majority of impact energy. In addition, employing end plates and high strength bolts as shear connectors could prevent the slip between steel plates and concrete core and assure the full composite action of the FS-C-CS panel.

키워드

과제정보

The research presented in this paper is financially supported by the Funds for Creative Research Groups of National Natural Science Foundation of China (Grant No. 51921006), the Fundamental Research Funds for the Central Universities (Grant No. FRFCU5710051919) and Heilongjiang Postdoctoral Fund (Grant No.: LBH-Q21099 and LBH-TZ1014).

참고문헌

  1. Abramowicz, W. and Jones N. (1986), "Dynamic progressive buckling of circular and square tubes", Int. J. Impact Eng., 4, 243-270. https://doi.org/10.1016/0734-743X(86)90017-5.
  2. Dogan, O. and Roberts, T.M. (2012), "Fatigue performance and stiffness variation of stud connectors in steel-concrete-steel sandwich systems", J. Construct. Steel Res., 70, 86-92. https://doi.org/10.1016/j.jcsr.2011.08.013.
  3. Feng, J., Li, W., Ding, C., Gao, D., Shi, Z. and Liang J. (2020), "Numerical and analytical investigations on projectile perforation on steel-concrete-steel sandwich panels", Results Eng., https://doi.org/10.1016/j.rineng.2020.100164.
  4. Guo, Q. and Zhao, W. (2019a), "Design of steel-concrete composite walls subjected to low-velocity impact", J. Construct. Steel Res., 154, 190-196. https://doi.org/10.1016/j.jcsr.2018.12.001.
  5. Guo, Q. and Zhao, W. (2019b), "Displacement response analysis of steel-concrete composite panels subjected to impact loadings", Int. J. Impact Eng., 131, 272-281. https://doi.org/10.1016/j.ijimpeng.2019.05.022.
  6. Hallquist, J. (2013), LS-DYNA Keyword User's Manual, Livermore Software Technology Corporation (LSTC), Livermore, CA, U.S.A.
  7. Huang, Z. and Liew, J.Y.R. (2015), "Nonlinear finite element modelling and parametric study of curved steel-concrete-steel double skin composite panels infilled with ultra-lightweight cement composite", Construct. Build. Mater., 95, 922-938. https://doi.org/10.1016/j.conbuildmat.2015.07.134.
  8. Huang, Z. and Liew, J.Y.R. (2016), "Experimental and analytical studies of curved steel-concrete-steel sandwich panels under patch loads", Mater. Des., 93, 104-117. https://doi.org/10.1016/j.matdes.2015.12.144.
  9. Iqbal, M.A., Kumar, V. and Mittal A.K. (2019), "Experimental and numerical studies on the drop impact resistance of prestressed concrete plates", Int. J. Impact Eng., 123, 98-117. https://doi.org/10.1016/j.ijimpeng.2018.09.013.
  10. Kang. K.W. (2012), Blast Resistance of Steel-Concrete Composite Structures, Ph.D. Dissertation, National University of Singapore, Singapore.
  11. Li, H., Chen, W. and Hao, H. (2019), "Dynamic response of precast concrete beam with wet connection subjected to impact loads", Eng. Struct., 191, 247-263. https://doi.org/10.1016/j.engstruct.2019.04.051.
  12. Liew, J.Y.R. and Sohel, K.M.A. (2009), "Lightweight steelconcrete- steel sandwich system with J-hook connectors", Eng. Struct., 31, 1166-1178. https://doi.org/10.1016/j.engstruct.2009.01.013.
  13. Liew, J.Y.R., Sohel, K.M.A. and Koh, C.G. (2009), "Impact tests on steel-concrete-steel sandwich beams with lightweight concrete core", Eng. Struct., 31(9), 2045-2059. https://doi.org/10.1016/j.engstruct.2009.03.007.
  14. Liew, J.Y.R., Sohel, K.M.A. and Koh, C.G. (2015), "Numerical modeling of lightweight steel-concrete-steel sandwich composite beams subjected to impact", Thin-Walled Struct., 94, 135-146. https://doi.org/10.1016/j.tws.2015.04.001.
  15. Mehreganian, N., Fallah, A.S. and Louca, L.A. (2019), "Plastic dynamic response of simply supported thick square plates subject to localised blast loading", Int. J. Impact Eng., 126, 85-100. https://doi.org/10.1016/j.ijimpeng.2018.12.010.
  16. Micallef, K., Fallah, A.S., Pope, D.J. and Louca L.A. (2012), "The dynamic performance of simply-supported rigid-plastic circular steel plates subjected to localised blast loading", Int. J. Mech. Sci., 65, 177-191. https://doi.org/10.1016/j.ijmecsci.2012.10.001.
  17. Oduyemi, T.O.S. and Wright, H.D. (1989), "An experimental investigation into the behaviour of double-skin sandwich beams", J. Construct. Steel Res., 14, 197-220. https://doi.org/10.1016/0143-974X(89)90073-4.
  18. Remennikov, A.M. and Kong, S.Y. (2012), "Numerical simulation and validation of impact response of axially-restrained steel- concrete-steel sandwich panels", Compos. Struct., 94(12), 3546-3555. https://doi.org/10.1016/j.compstruct.2012.05.011.
  19. Remennikov, A.M., Kong, S.Y. and Uy, B. (2013), "The response of axially restrained non-composite steel-concrete-steel sandwich panels due to large impact loading", Eng. Struct., 49, 806-818. https://doi.org/10.1016/j.engstruct.2012.11.014.
  20. Shariati, M., Sulong, N.H.R., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Construct. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050.
  21. Smith, D.W., Solomon, S.K. and Cusens, A.R. (1976), "Flexural tests of steel-concrete-steel sandwiches", Mag. Concrete Res., 28(94), 13-20. https://doi.org/10.1680/macr.1976.28.94.13.
  22. Sohel, K.M.A. and Liew, J.Y.R. (2011), "Steel-concrete-steel sandwich slabs with lightweight core-static performance", Eng. Struct., 33(3), 981-992. https://doi.org/10.1016/j.engstruct.2010.12.019.
  23. Sohel, K.M.A., Liew, J.Y.R., Yan, J.B., Zhang, M.H. and Chia K.S. (2012), "Behavior of steel-concrete-steel sandwich structures with lightweight cement composite and novel shear connectors", Compos. Struct., 94(12), 3500-3509. https://doi.org/10.1016/j.compstruct.2012.05.023.
  24. Sohel, K.M.A. and Liew, J.Y.R. (2014), "Behavior of steel- concrete-steel sandwich slabs subject to impact load", J. Construct. Steel Res., 100, 163-175. https://doi.org/10.1016/j.jcsr.2014.04.018.
  25. Sohel, K.M.A., Liew, J.Y.R., Koh, C.G. (2015), "Numerical modelling of lightweight steel-concrete-steel sandwich composite beams subjected to impact", Thin-Walled Struct., 94, 135-146. https://doi.org/10.1016/j.tws.2015.04.001.
  26. Sohel, K.M.A., Al-Jabri, K. and Al Abri, A.H.S. (2020), "Behavior and design of reinforced concrete building columns subjected to low-velocity car impact", Struct., 26, 601-616. https://doi.org/10.1016/j.istruc.2020.04.054.
  27. Xie, M., Foundoukos, N. and Chapman, J.C. (2007), "Static tests on steel-concrete-steel sandwich beams", Journal of Constructional Steel Research, 63(6), 735-750. https://doi.org/10.1016/j.jcsr.2006.08.001.
  28. Wang, Y., Liew, J.Y.R. and Lee, S.C. (2015a), "Experimental and numerical studies of non-composite steel-concrete-steel sandwich panels under impulsive loading", Mater. Des., 81, 104-112. https://doi.org/10.1016/j.matdes.2015.05.033.
  29. Wang, Y., Liew, J.Y.R. and Lee, S.C. (2015b), "Theoretical models for axially restrained steel-concrete-steel sandwich panels under blast loading", Int. J. Impact Eng., 76, 221-231. https://doi.org/10.1016/j.ijimpeng.2014.10.005.
  30. Wang, Y., Zhai, X., Lee, S.C. and Wang, W. (2016a), "Responses of curved steel-concrete-steel sandwich shells subjected to blast loading", Thin-Walled Struct., 108, 185-192. https://doi.org/10.1016/j.tws.2016.08.018.
  31. Wang, Y., Liew J.Y.R. and Lee, S.C. (2016b), "Ultimate strength of steel-concrete-steel sandwich panels under lateral pressure loading", Eng. Struct., 76, 221-231. https://doi.org/10.1016/j.engstruct.2016.02.012.
  32. Yan, J.B. and Liew, J.Y.R. (2016), "Design and behavior of steel- concrete-steel sandwich plates subject to concentrated loads", Compos. Struct., 150, 139-152. https://doi.org/10.1016/j.compstruct.2016.05.004.
  33. Yan, J.B., Qian, X., Liew, J.Y.R. and Zong, L. (2016a), "Dynamic response of precast concrete beam with wet connection subjected to impact loads", Eng. Struct., 117, 542-559. https://doi.org/10.1016/j.engstruct.2016.03.028.
  34. Yan, J.B., Wang J., Liew J.Y.R., Qian X. and Zong L. (2016b), "Ultimate strength behaviour of steel-concrete-steel sandwich plate under concentrated loads", Ocean Eng., 118, 41-57. https://doi.org/10.1016/j.oceaneng.2016.03.062.
  35. Yan, J.B., Zhang, W., Liew, J.Y.R. and Li, Z. (2016c), "Numerical studies on shear resistance of headed stud connectors in different concretes under Arctic low temperature", Mater. Des., 112, 184-196. https://doi.org/10.1016/j.matdes.2016.09.062.
  36. Yan, J.B., Guan H.N., Wang T. (2020a), "Finite element analysis on flexural behaviours of SCS sandwich beams with novel enhanced C-channel connectors", J. Build. Eng., 31, 247-263. https://doi.org/10.1016/j.jobe.2020.101439.29.
  37. Yan, J.B., Hu, H. and Wang, T. (2020b), "Shear behaviour of novel enhanced C-channel connectors in steel-concrete-steel sandwich composite structures", J. Construct. Steel Res., 166. https://doi.org/10.1016/j.jcsr.2019.105903.
  38. Yan, C., Wang, Y., Zhai, X., Meng, L. and Zhou, H. (2019), "Experimental study on curved steel-concrete-steel sandwich shells under concentrated load by a hemi-spherical head", Thin- Walled Struct., 137, 117-128. https://doi.org/10.1016/j.tws.2019.01.007.
  39. Yan, C., Wang, Y. and Zhai, X. (2020d), "Low velocity impact performance of curved steel-concrete-steel sandwich shells with bolt connectors", Thin-Walled Struct., 150. https://doi.org/10.1016/j.tws.2020.106672.
  40. Yan, C., Wang, Y., Zhai, X. and Meng, L. (2020e), "Strength assessment of curved steel-concrete-steel sandwich shells with bolt connectors under concentrated load", Eng. Struct., 212. https://doi.org/10.1016/j.engstruct.2020.110465.
  41. Zhao, W. and Guo, Q. (2018), "Experimental study on impact and post-impact behavior of steel-concrete composite panels", Thin- Walled Struct., 130, 405-413. https://doi.org/10.1016/j.tws.2018.06.012.
  42. Zhao, W., Guo, Q., Dou, X., Zhou, Y. and Ye, Y. (2018), "Impact response of steel-concrete composite panels: Experiments and FE analyses", Steel Compos. Struct., 26(3), 255-263. https://doi.org/10.12989/scs.2018.26.3.255.
  43. Zhao, W., Qian, J. and Jia, P. (2019), "Peak response prediction for RC beams under impact loading", Shock Vib., 2019(PT.1), 1-12. https://doi.org/10.1155/2019/6813693.