Advances in Computational Design

  • 제7권1호
  • /
  • Pages.19-35
  • /
  • 2022
  • /
  • 2383-8477(pISSN)
  • /
  • 2466-0523(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimization of lateral resisting system of framed tubes combined with outrigger and belt truss

  • Mohammadnejad, Mehrdad (Department of Civil Engineering, Birjand University of Technology) ;
  • Kazemi, Hasan Haji (Department of Civil Engineering, Faculty of Engineering, Ferdowsi University of Mashhad)
  • 투고 : 2020.11.25
  • 심사 : 2021.11.04
  • 발행 : 2022.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the optimum location of the belt truss-outrigger for a combined system of framed tube, shear core and outrigger-belt truss is calculated. The optimum location is determined by maximization of the first natural frequency. The framed tube is modeled using a non-prismatic cantilever beam with hollow box cross section. The governing differential equation is solved using the weak form integral equations and the natural frequencies of the structure are calculated. The graphs are introduced for quick calculation of the first natural frequency. The location of the belt truss-outrigger that maximizes the first natural frequency of the structure is introduced as an optimum location. The structure is modeled using SAP-2000 finite elements software. In the modelling, the location of the belt truss-outrigger is changed along the height of the structure. With various locations of the outrigger, the lateral deflection of the all stories and axial force in the columns of the outer tube are calculated. The analysis is repeated by locating the outrigger-belt truss at the optimum location. The analysis results are compared and effect of the optimum location on the lateral deflection and the shear lag phenomena are investigated.

키워드

참고문헌

  1. Alavi, A., Rahgozar, P. and Rahgozar, R. (2018), "Minimum-weight design of high-rise structures subjected to flexural vibration at a desired natural frequency", Struct. Des. Tall Spec., 27(15), e1515. https://doi.org/10.1002/tal.1515.
  2. Akbulut, M., Sarac, A. and Ertas, A.E. (2020), "An investigation of non-linear optimization methods on composite structures under vibration and buckling loads", Adv Comput. Des, 5(3), 209-231. http://dx.doi.org/10.12989/acd.2020.5.3.209.
  3. Beghini, A., Beghini, L.L., Baker, W.F. and Paulino, G.H. (2014), "Buckling and stiffness optimization of tall buildings", Struct. Congress 2014, 2537-2547. https://doi.org/10.1061/9780784413357.222.
  4. Diaz, A.R. and Kikuchi, N. (1992), "Solutions to shape and topology eigenvalue optimization problems using a homogenization method", Int. J. Numer. Meth. Eng., 35(7), 1487-1502. https://doi.org/10.1002/nme.1620350707.
  5. Niu, F., Xu, S. and Cheng, G. (2011), "A general formulation of structural topology optimization for maximizing structural stiffness", Struct. Multidiscip. O. 43(4), 561-572. https://doi.org/10.1007/s00158-010-0585-8.
  6. Farghaly, A. (2016), "Seismic assessment of slender high-rise buildings with different shear walls configurations", J. Adv. Comput. Des., 1(3), 221-234. http://dx.doi.org/10.12989/acd.2016.1.3.221.
  7. Gholipour, M. and Mazloom, M. (2018), "Seismic response analysis of mega-scale buckling-restrained bracing systems in TALL buildings", J. Adv. Comput. Des., 3(1), 17-34. http://dx.doi.org/10.12989/acd.2018.3.1.017.
  8. Hoenderkamp, J.C.D. (2008), "Second outrigger at optimum location on high-rise shear wall", Struct. Des. Tall Spec., 17(3), 619-634. https://doi.org/10.1002/tal.369.
  9. Hoenderkamp, J.C.D. and Bakker, M.C.M. (2003), "Analysis of high-rise braced frames with outrigger", Struct. Des. Tall Spec., 12(4), 335-350. https://doi.org/10.1002/tal.226.
  10. Kamgar, R. and Rahgozar, R. (2017), "Determination of optimum location for flexible outrigger systems in tall buildings with constant cross section consisting of framed tube, shear core, belt truss and outrigger system using energy method", Int. J. Steel Struct., 17(1), 1-8. https://doi.org/10.1007/s13296-014-0172-8.
  11. Kamgar, R. and Saadatpour, M. (2012), "A simple mathematical model for free vibration analysis of combined system consisting of framed tube, shear core, belt truss and outrigger system with geometrical discontinuities", Appl. Math. Model., 36(10), 4918-4930. https://doi.org/10.1016/j.apm.2011.12.029.
  12. Karimi, M., Kheyroddin, A. and Shariatmadar, H. (2020), "Relationships for prediction of backstay effect in TALL buildings with core-wall system", J. Adv. Comput. Des., 5(1), 35-54. https://doi.org/10.12989/acd.2020.5.1.035.
  13. Kaveh, A. and Ilchi Ghazaan, M. (2016), "Truss optimization with dynamic constraints using UECBO", J. Adv. Comput. Des., 1(2), 119-138. http://dx.doi.org/10.12989/acd.2016.1.2.119.
  14. Kaviani, P., Rahgozar, R. and Saffari, H. (2008), "Approximate analysis of tall buildings using sandwich beam models with variable cross-section", Struct. Des. Tall Spec., 17(2), 401-418. https://doi.org/10.1002/tal.360.
  15. Lee, J., Bang, M. and Kim, J.Y. (2008), "An analytical model for high-rise wall-frame structures with outriggers", Struct. Des. Tall Spec., 17(4), 839-851. https://doi.org/10.1002/tal.406.
  16. Lee, D.K., Kim, J.H., Starossek, U. and Shin, S.M. (2012), "Evaluation of structural outrigger belt truss layouts for tall buildings by using topology optimization" Struct. Eng. Mech., 43(6), 711-724. http://dx.doi.org/10.12989/sem.2012.43.6.711.
  17. Malekinejad, M., Rahgozar, R., Malekinejad, A. and Rahgozar, P. (2016), "A continuous-discrete approach for evaluation of natural frequencies and mode shapes of high-rise buildings", Int. J. Adv. Struct. Eng., 8(3), 269-280. https://doi.org/10.1007/s40091-016-0129-6.
  18. Mohammadnejad, M. and Kazemi, H.H. (2018), "A new and simple analytical approach to determining the natural frequencies of framed tube structures", J. Struct. Eng. Mech., 65(1), 111-120. http://dx.doi.org/10.12989/sem.2018.65.1.111.
  19. Mohammadnejad, M. and Kazemi, H.H. (2017), "Dynamic response analysis of a combined system of framed tube, shear core and outrigger-belt truss", Asian J. Civil Eng., 18(8), 1211-1228.
  20. Malekinejad, M. and Rahgozar, R. (2013), "An analytical approach to free vibration analysis of multioutrigger-belt truss-reinforced tall buildings", Struct. Des. Tall Spec., 22(4), 382-398. https://doi.org/10.1002/tal.703.
  21. Malekinejad, M. and Rahgozar, R. (2012), "A simple analytic method for computing the natural frequencies and mode shapes of tall buildings", J. Appl. Math. Model., 36(8), 3419-3432. https://doi.org/10.1016/j.apm.2011.10.018.
  22. Mortazavi, A. and Togan, V. (2017), "Triangular units based method for simultaneous optimizations of planar trusses", J. Adv. Comput. Des., 2(3), 195-210. http://dx.doi.org/10.12989/acd.2017.2.3.195.
  23. Pedersen, N.L. (2000), "Maximization of eigenvalues using topology optimization", Struct. Multidiscip. O., 20(1), 2-11. https://doi.org/10.1007/s001580050130.
  24. Rahgozar, R., Ahmadi, A. and Sharifi, Y. (2010), "A simple mathematical model for approximate analysis of tall buildings", J. Appl. Math. Model., 34(9), 2437-51. https://doi.org/10.1016/j.apm.2009.11.009.
  25. Rahgozar, R., Mahmoudzadeh, Z., Malekinejad, M. and Rahgozar, P. (2015), "Dynamic analysis of combined system of framed tube and shear walls by galerkin method using B-spline functions", Struct. Des. Tall Spec., 24(8), 591-606. https://doi.org/10.1002/tal.1201.
  26. Rahgozar, R., Ahmadi, A.R., Ghelichi, M., Goudarzi, Y., Malekinejad, M. and Rahgozar, P., (2014), "Parametric stress distribution and displacement functions for tall buildings under lateral loads", Struct. Des. Tall Spec., 23(1), 22-41. https://doi.org/10.1002/tal.1016.
  27. Tavakoli, R., Kamgar, R. and Rahgozar, R. (2019), "Seismic performance of outrigger-belt truss system considering soil-structure interaction", Int. J. Adv. Struct. Eng., 11(1), 45-54. https://doi.org/10.1007/s40091-019-0215-7.
  28. Tavakoli, R., Kamgar, R. and Rahgozar, R. (2018), "The best location of belt truss system in tall buildings using multiple criteria subjected to blast loading", Civil Eng., 4(6), 1338-1353. http://dx.doi.org/10.28991/cej-0309177
  29. Tejani, G., Savsani, V.J., Patel, V.K. and Bureerat, S. (2017), "Topology, shape, and size optimization of truss structures using modified teaching-learning based optimization", J. Adv. Comput. Des., 2(4), 313-331. http://dx.doi.org/10.12989/acd.2017.2.4.313.
  30. Zhou, Y., Zhang, C. and Lu, X. (2016), "An inter-story drift-based parameter analysis of the optimal location of outriggers in tall buildings", Struct. Des. Tall Spec., 25(5), 215-231. https://doi.org/10.1002/tal.1236.