Structural Engineering and Mechanics

  • 제81권2호
  • /
  • Pages.163-178
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of high temperatures on local bond-slip behavior between rebars and UHPC

  • Tang, Chao-Wei (Department of Civil Engineering & Geomatics, Cheng Shiu University)
  • 투고 : 2021.01.12
  • 심사 : 2021.10.22
  • 발행 : 2022.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper aimed to study the local bond-slip behavior between ultra-high-performance concrete (UHPC) and a reinforcing bar after exposure to high temperatures. A series of pull-out tests were carried out on cubic specimens of size 150×150×150 mm with deformed steel bar embedded for a fixed length of three times the diameter of the tested deformed bar. The experimental results of the bond stress-slip relationship were compared with the Euro-International Concrete Committee (CEB-Comite Euro-International du Beton)-International Federation for Prestressing (FIP-Federation Internationale de la Precontrainte) Model Code and with prediction models found in the literature. In addition, based on the test results, an empirical model of the bond stress-slip relationship was proposed. The evaluation and comparison results showed that the modified CEB-FIP Model code 2010 proposed by Aslani and Samali for the local bond stress-slip relationship for UHPC after exposure to high temperatures was more conservative. In contrast, for both room temperature and after exposure to high temperatures, the modified CEB-FIP Model Code 2010 local bond stress-slip model for UHPC proposed in this study was able to predict the test results with reasonable accuracy.

키워드

과제정보

The research was funded by the Ministry of Science and Technology of Taiwan grant number MOST 108-2221-E-230-003-MY2. The author sincerely thanks the Ministry of Science and Technology of Taiwan for funding this research work.

참고문헌

  1. Abbas, S., Nehdi, M.L. and Saleem, M.A. (2016), "Ultra-high performance concrete: mechanical performance, durability, sustainability and implementation challenges", Int. J. Concrete Struct. Mater., 10(3), 271-295. https://doi.org/10.1007/s40069-016-0157-4.
  2. ACI Committee 408-03 (2003), Bond and Development of Straight Reinforcing Bars in Tension (ACI 408R-03), American Concrete Institute, Farmington Hills, Mich.
  3. Alkaysi, M. and El-Tawil, S. (2016), "Bond between ultra-high performance concrete and steel bars", Proceedings of the First International Interactive Symposium on UHPC, Iowa State University, July.
  4. Aslani, F. and Samali, B. (2013), "Predicting the bond between concrete and reinforcing steel at elevated temperatures", Struct. Eng. Mech., 48(5), 643-660. https://doi.org/10.12989/sem.2013.48.5.643.
  5. Aslani, F. and Samali, B. (2013a), "Constitutive relationships for steel fiber reinforced concrete at elevated temperatures", Fire Tech., 50(5), 1249-1268. https://doi.org/10.1007/s10694-012-0322-5.
  6. Aslani, F. and Samali, B. (2013b), "High strength polypropylene fibre reinforcement concrete at high temperature", Fire Tech., 50(5), 1229-1247. https://doi.org/10.1007/s10694-013-0332-y.
  7. Aslani, F. and Samali, B. (2013c), "Constitutive relationships for self-compacting concrete at elevated temperatures", Mater. Struct., 48(1), 337-356. https://doi.org/10.1617/s11527-013-0187-1.
  8. Bazant, Z.P. and Kaplan, M.F. (1996), Concrete at High Temperatures, Longman Group Limited.
  9. Cai, B., Wu, A. and Fu, F. (2020), "Bond behavior of PP fiber-reinforced cinder concrete after fire exposure", Comput. Concrete, 26(2), 115-125. https://doi.org/10.12989/cac.2020.26.2.115.
  10. CEB (2010), CEB-FIP Model Code 2010, Lausanne, Switzerland.
  11. Chen, Z., Zhou, J. and Wang, X. (2020b), "Study on bond behavior of steel reinforced high strength concrete after high temperatures", Adv. Concrete Constr., 10(2), 113-125. https://doi.org/10.12989/acc.2020.10.2.113.
  12. Chen, Z., Zhou, J., Liang, Y. and Ye, P. (2020a), "Residual behavior of recycled aggregate concrete beam and column after elevated temperatures", Struct. Eng. Mech., 76(4), 513-528. https://doi.org/10.12989/sem.2020.76.4.513.
  13. Cui, Y., Zhang, P. and Bao, J. (2020), "Bond stress between steel-reinforced bars and fly ash-based geopolymer concrete", Adv. Mater. Sci. Eng., 2020, Article ID 9812526. https://doi.org/10.1155/2020/9812526.
  14. Eligehausen, R., Popov, E.P. and Bertero, V.V. (1983), Local Bond Stress-Slip Relationships of Deformed Bars under Generalized Excitations, University of California, Berkeley.
  15. Esfahani, M.R. and Rangan, B.V. (2000), "Influence of transverse reinforcement on bond strength of tensile splices", Cement Concrete Compos., 22(3), 159-163, https://doi.org/10.1016/S0958-9465(00)00005-6.
  16. Fib Bulletin 46 (2008), Fire Design of Concrete Structures-Structural Behaviour and Assessment, State-of-Art Report, Chapter 6, Expertise and Assessment of Materials and Structures after Fire.
  17. Filippou, F.C., Popov, E.P. and Bertero, V.V. (1983), "Modeling of R/C joints under cyclic excitations", J. Struct. Eng., 109(11), 2666-2684. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:11(2666).
  18. Haddad, R. and Shannis, L. (2004), "Post-fire behavior of bond between high strength pozzolanic concrete and reinforcing steel", Constr. Build. Mater., 18, 425-435. https://doi.org/10.1016/j.conbuildmat.2004.03.006.
  19. Haddad, R.H., Al-Saleh, R.J. and Al-Akhras, N.M. (2008), "Effect of elevated temperature on bond between steel reinforcement and fiber reinforced concrete", Fire Saf. J., 43, 334-343. https://doi.org/10.1016/j.firesaf.2007.11.002.
  20. Harajli, M.H. (2007), "Numerical bond analysis using experimentally derived local bond laws: A powerful method for evaluating the bond strength of steel bars", J. Struct. Eng., 133(5). 695-705. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:5(695).
  21. Harajli, M.H., Hout M. and Jalkh W. (1995), "Local bond stress-slip behaviour of reinforcing bars embedded in plain and fiber concrete", ACI Mater. J., 92(4), 343-353.
  22. Huang, Z., Engstrom, B. and Magnusson, J. (1996a), "Experimental and analytical studies of the bond behavior of deformed bars in high strength concrete", Proceedings of the 4th International Symposium on the Utilization of High Strength/High Performance Concrete, Paris, May.
  23. Huang, Z., Engstrom, B. and Magnusson, J. (1996b), Experimental Investigation of the Bond and Anchorage Behaviour of Deformed Bars in High Strength Concrete, Report 95:4, Chalmers University of Technology.
  24. Kim, S., Lee, J., Joh, C. and Kwahk, I. (2016), "Flexural bond behavior of rebar in ultra-high performance concrete beams considering lap-splice length and cover depth", Eng., 8(03), 116. https://doi.org/10.4236/eng.2016.83013.
  25. Liu, B. and Bai, G.L. (2019), "Finite element modeling of bond-slip performance of section steel reinforced concrete", Comput. Concrete, 24(3), 237-247. https://doi.org/10.12989/cac.2019.24.3.237.
  26. Ma, K., Ma, Y. and Liu, B. (2019), "Research on eccentric compression of ultra-high performance fiber reinforced concrete columns", Struct. Eng. Mech., 71(3), 211-221. https://doi.org/10.12989/sem.2019.71.3.211.
  27. Metha, P.K. and Monteiro, P.J.M. (2006), Concrete; Microstructure, Properties and Materials, 3rd Edition, McGraw-Hill, New York, NY, USA.
  28. Pishro, A.A. and Feng, X. (2017), "Experimental study on bond stress between ultra high performance concrete and steel reinforcement", Civil Eng. J., 3(12), 1235-1246. https://doi.org/10.28991/cej-030953.
  29. Pokorny, P., Kolisko, J., Citek, D. and Kostelecka, M. (2020), "Effect of elevated temperature on the bond strength of prestressing reinforcement in UHPC", Mater., 13, 4990. https://doi.org/10.3390/ma13214990.
  30. Pyo, S., Kim, H.K. and Lee, B.Y. (2017), "Effects of coarser fine aggregate on tensile properties of ultra high performance concrete", Cement Concrete Compos., 84, 28e35. https://doi.org/10.1016/j.cemconcomp.2017.08.014.
  31. Roy, M., Corey, H. and Wille, K. (2017), "Influence of volume fraction and orientation of fibers on the pullout behavior of reinforcement bar embedded in ultra-high performance concrete", Constr. Build. Mater., 146, 582-593, https://doi.org/10.1016/j.conbuildmat.2017.04.081.
  32. Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z. and Fang, Z. (2015), "A review on ultra high performance concrete: Part 1. Raw materials and mixture design", Constr. Build. Mater., 101, 741-751. https://doi.org/10.1016/j.conbuildmat.2015.10.088.
  33. Smarzewski, P. (2019), "Study of toughness and macro/micro-crack development of fibre-reinforced ultra-high performance concrete after exposure to elevated temperature", Mater., 12, 1210. https://doi.org/10.3390/ma12081210.
  34. Soroushian, P. and Choi, K.B. (1989), "Local bond of deformed bars with different diameters in confined concrete", ACI Struct. J., 86(2), 217-222.
  35. Tang, C.W. (2015), "Uniaxial bond stress-slip behavior of reinforcing bars embedded in lightweight aggregate concrete", Comput. Concrete, 16(3), 449-466. https://doi.org/10.12989/cac.2015.16.3.449.
  36. Tang, C.W. (2017), "Uniaxial bond stress-slip behavior of reinforcing bars embedded in lightweight aggregate concrete", Struct. Eng. Mech., 62(5), 651-661. https://doi.org/10.12989/sem.2017.62.5.651.
  37. Tang, C.W. (2018), "Local bond-slip behavior of medium and high strength fiber reinforced concrete after exposure to high temperatures", Struct. Eng. Mech., 66(4), 477-485. https://doi.org/10.12989/sem.2018.66.4.477.
  38. Tang, C.W. (2020), "Local bond-slip behavior of fiber reinforced LWAC after exposure to elevated temperatures", Struct. Eng. Mech., 73(4), 437-445. https://doi.org/10.12989/sem.2020.73.4.437.
  39. Xiong, M.X. and Liew, J.Y.R. (2015), "Spalling behavior and residual resistance of fibre reinforced Ultra-High performance concrete after exposure to high temperatures", Materiales de Construccion, 65, e071. http://doi.org/10.3989/mc.2015.00715.
  40. Xu, Y.L. (1997), "A simplified model of bond-slip relationship for reinforced concrete", Eng. Mech. (A02), 34. (in Chinese)
  41. Yan, L.L., Liang, J.F. and Zhao, Y. (2019), "Effect of high temperature on the bond performance between steel bars and recycled aggregate concrete.", Comput. Concrete, 23(3), 155-160. https://doi.org/10.12989/cac.2019.23.3.155.
  42. Yerex, L., Wenzel, T.H. and Davies, R. (1985), "Bond strength of mild steel in polypropylene fiber reinforced concrete", ACI J., 82(1), 40-45.
  43. Yoo, D.Y., Kwon, K.Y., Yang, J.M. and Yoon, Y.S. (2017), "Effect of cover depth and rebar diameter on shrinkage behavior of ultra-high-performance fiber-reinforced concrete slabs", Struct. Eng. Mech., 61(6), 711-719. https://doi.org/10.12989/sem.2017.61.6.711.