Structural Engineering and Mechanics

  • 제81권1호
  • /
  • Pages.59-68
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental and analytical study on prestressed concrete hollow slabs with asymmetric boundary conditions

  • Ma, Haiying (Department of Bridge Engineering, Tongji University) ;
  • Lai, Minghui (Sichuan Highway Planning, Survey, Design and Research Institute Ltd.) ;
  • Xia, Ye (Department of Bridge Engineering, Tongji University)
  • 투고 : 2020.03.10
  • 심사 : 2021.10.28
  • 발행 : 2022.01.10
⟨ 이전 논문 다음 논문 ⟩

초록

Prestressed prefabricated hollow core concrete slabs with spans of 5 m and 10 m are commonly used since last century and still in service due to the advantage of construction convenience and durability. However, the end slabs are regularly subjected to cracks at the top and fail with brittleness due to the asymmetric boundary conditions. To better maintain such widely used type of hollow core slabs, the effect of asymmetric constraint in the end slabs are systematically studied through detailed nonlinear finite element analyses and experimental data. Experimental tests of slabs with four prestressed tendons and seven prestressed tendons with different boundary conditions were conducted. Results observe three failure modes of the slabs: the bending failure mode, shear and torsion failure mode, and transverse failure mode. Detailed nonlinear finite element models are developed to well match the failure modes and to reveal potential damage scenarios with asymmetric boundary conditions. Recommendations regarding ultimate capacity of the slabs with asymmetric boundary conditions are made to ensure a safe and rational design of prestressed concrete hollow slabs for short span bridges.

키워드

과제정보

This paper is supported by the National Key Research & Development Program of China (2018YFC0809606), the National Natural Science Foundation of China (51978508), and Transportation Science and Technology Program of Shandong Province (2021B51).

참고문헌

  1. Araujo, C.A.M., Loriggio, D.D. and Camara, J.M.N.D. (2011), "Anchorage failure and shear design of hollow-core slabs", Struct. Concrete, 12(2), 109-119. https://doi.org/10.1002/suco.201000024.
  2. ASTM C39/C39M-21 (2021), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA.
  3. Baran, M., Susoy, M. and Tankut, T. (2011), "Strengthening of deficient RC frames with high strength concrete panels: an experimental study", Struct. Eng. Mech., 37(2), 177-196. https://doi.org/10.12989/sem.2011.37.2.177.
  4. Brunesi, E. and Nascimbene, R. (2015), "Numerical web-shear strength assessment of precast prestressed hollow core slab units", Eng. Struct., 102, 13-30. https://doi.org/10.1016/j.engstruct.2015.08.013.
  5. Brunesi, E., Bolognini, D. and Nascimbene, R. (2015), "Evaluation of the shear capacity of pre-cast-prestressed hollow core slabs: Numerical and experimental comparisons", Mater. Struct., 48(5), 1503-1521. https://doi.org/10.1617/s11527-014-0250-6.
  6. Cho, H.C., Park, M.K., Ju, H., Oh, J.Y., Oh, Y.H. and Kim, K.S. (2017), "Shear strength reduction factor of prestressed hollow-core slab units based on the reliability approach", Adv. Mater. Sci. Eng., 2017, Article ID 8280317. https://doi.org/10.1155/2017/8280317.
  7. Cuenca, E. and Serna, P. (2013), "Failure modes and shear design of prestressed hollow core slabs made of fiber-reinforced concrete", Compos. Part B: Eng., 45(1), 952-964. https://doi.org/10.1016/j.compositesb.2012.06.005.
  8. El-Lobody, E. and Lam, D. (2005), "Determining the effective width of composite beams with precast hollow core slabs", Struct. Eng. Mech., 21(3), 295-313. http://doi.org/10.12989/sem.2005.21.3.295.
  9. Elgabbas, F., El-Ghandour, A.A., Abdelrahman, A.A. and El-Dieb, A.S. (2010), "Different CFRP strengthening techniques for prestressed hollow core concrete slabs: Experimental study and analytical investigation", Compos. Struct., 92(2), 401-411. https://doi.org/10.1016/j.compstruct.2009.08.015.
  10. Ganesan, P. and Kumar, S. (2019), "FE modelling of low velocity impact on RC and prestressed RC slabs", Struct. Eng. Mech., 71(5), 515-524. https://doi.org/10.12989/sem.2019.71.5.515.
  11. Huang, P.M., Yuan, Y.G., Zhao, J.F., Han, W.S., Li, Y.Q. and Wu, J. (2017), "Bearing capacity safety of hollow slab bridge under heavy traffic load", J. Traff. Tran. Eng., 17(3), 1-12. (in Chinese)
  12. Ibrahim, I.S., Elliott, K.S., Abdullah, R., Kueh, A.B.H. and Sarbini, N.N. (2016), "Experimental study on the shear behaviour of precast concrete hollow core slabs with concrete topping", Eng. Struct., 125, 80-90. https://doi.org/10.1016/j.engstruct.2016.06.005.
  13. Kankeri, P. and Prakash, S.S. (2017), "Efficient hybrid strengthening for precast hollow core slabs at low and high shear span to depth ratios", Compos. Struct., 170, 202-214. https://doi.org/10.1016/j.compstruct.2017.03.034.
  14. Kankeri, P., Prakash, S.S. and Pachalla, S.K.S. (2018), "Analytical and numerical studies on hollow core slabs strengthened with hybrid FRP and overlay techniques", Struct. Eng. Mech., 65(5), 535-546. https://doi.org/10.12989/sem.2018.65.5.535.
  15. Meng, X., Cheng, S. and El Ragaby, A. (2016), "Shear strengthening of prestressed hollow core slabs using externally bonded Carbon Fiber Reinforced Polymer sheets", PCI J., 64(5), 77-94.
  16. Moyo, P., Sibanda, B. and Beushausen, H. (2012), "Modelling and integrity assessment of shear connectors in precast cast-in-situ concrete bridges", Struct. Eng. Mech., 42(1), 55-72. http://doi.org/10.12989/sem.2012.42.1.055.
  17. Park, M.K., Lee, D.H., Han, S.J. and Kim, K.S. (2019), "Web-shear capacity of thick precast prestressed hollow-core slab units produced by extrusion method", Int. J. Concrete Struct. Mater., 13(1), 7. https://doi.org/10.1186/s40069-018-0288-x.
  18. Quan, W., Zhang, F.W., Xu, Q.F. and Han, C.Q. (2012), "Experimental study on mechanical behavior of PC hollow-core slab exposed to fire", J. Disast. Preven. Mitigat. Eng., 33(9), 112-118.
  19. Rahman, M.K., Baluch, M.H., Said, M.K. and Shazali, M.A. (2012), "Flexural and shear strength of prestressed precast hollow-core slabs", Arab. J. Sci. Eng., 37(2), 443-455. https://doi.org/10.1007/s13369-012-0175-8.
  20. Sgambia, L., Gkoumas, K. and Bontempic, F. (2014), "Genetic algorithm optimization of precast hollow core slabs", Comput. Concrete, 13(3), 389-409. http://10.12989/cac.2014.13.3.389.
  21. Xiang, Y.Q., Cheng, X.I.N.G. and Linhai, S.H.A.O. (2013), "Calculating method and experimental research on lateral load distribution of transversely strengthened hollow slab bridge", Chin. J. Highw. Tran., 26(2), 63-68. (in Chinese)
  22. Xu, Q., Li, X., Chen, J.F. and Gong, C. (2013), "Experimental study on PC hollow-core slab strengthened with bamboo plates", J. Southeast Univ. (Nat. Sci. Ed.), 43(3), 559-564. https://doi.org/10.3969/j.issn.1001-0505.2013.03.021. (in Chinese)