Coupled systems mechanics

  • 제11권6호
  • /
  • Pages.525-542
  • /
  • 2022
  • /
  • 2234-2184(pISSN)
  • /
  • 2234-2192(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Advanced approach to design of small wind turbine support structures

  • Ismar, Imamovic (University of Sarajevo-Faculty of Civil Engineering) ;
  • Suljo, LJukovac (University of Sarajevo-Faculty of Civil Engineering) ;
  • Adnan, Ibrahimbegovic (University of Technology Compiegne, Centre de Recherches Royallieu, Laboratory Roberval Mecanique)
  • 투고 : 2022.05.23
  • 심사 : 2022.07.15
  • 발행 : 2022.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this work we present an advanced approach to the design of small wind turbine support steel structures. To this end we use an improved version of previously developed geometrically exact beam models. Namely, three different geometrically exact beam models are used, the first two are the Reissner and the Kirchhoff beam models implementing bi-linear hardening response and the third is the Reissner beam capable of also representing connections response. All models were validated in our previous research for a static response, and in this work they are extended to dynamic response. With these advanced models, we can perform analysis of four practical solutions for the installation of small wind turbines in new or existing buildings including effects of elastoplastic response to vibration problems. The numerical simulations confirm the robustness of numerical models in analyzing vibration problems and the crucial effects of elastoplastic response in avoiding resonance phenomena.

키워드

과제정보

The research described in this paper was financially supported by the Ministry of Education, Science and Youth of Sarajevo Canton, Bosnia and Herzegovina and MAEA funding for project CESPA.

참고문헌

  1. Boujelben, A., Ibrahimbegovic, A. and Lefrancois, E. (2020), "An efficient computational model for fluidstructure interaction in application to large overall motion of wind turbine with flexible blades", Appl. Math. Model., 77, 392-407. https://doi.org/10.1016/j.apm.2019.07.033.
  2. Dujc, J., Bostjan, B. and Ibrahimbegovic, A. (2010), "Multi-scale computational model for failure analysis of metal frames that includes softening and local buckling", Comput. Meth. Appl. Mech. Eng., 199, 1371-1385. https://doi.org/10.1016/j.cma.2009.09.003.
  3. EN 1993-1-8 (2005), Eurocode 3: Design of Steel Structures-Part 1-8: Design of Joint, Bruxelles: European Commitee.
  4. Faella, C., Piluso, V. and Rizzano, G. (2000), Structural Steel Semirigid Connections: Theory, Design, and Software, CRC Press LLC.
  5. Hajdo, E., Mejia-Nava, R.A., Imamovic, I. and Ibrahimbegovic, A. (2021), "Linearized instability analysis of frame structures under nonconservative loads: Static and dynamic approach", Couple. Syst. Mech., 10(1), 79-102. https://doi.org/10.12989/csm.2021.10.1.079.
  6. Hajdo, E., Ibrahimbegovic, A. and Dolarevic, S. (2020), "Buckling analysis of complex structures with refined model built of frame and shell finite elements", Couple. Syst. Mech., 9, 29-46. https://doi.org/10.12989/csm.2020.9.1.029.
  7. Hill, R. (1950), The Mathematical Theory of Plasticity, Clarendon Press, Oxford.
  8. Ibrahimbegovic, A (1995), "On finite element implementation of geometrically nonlinear Reissner's beam theory: Three-dimensional curved beam elements", Comput. Meth. Appl. Mech. Eng., 122(1-2), 11-26. https://doi.org/10.1016/0045-7825(95)00724-F.
  9. Ibrahimbegovic, A. (2009), Nonlinear Solid Mechanics, Springer.
  10. Ibrahimbegovic, A. and Frey, F. (1993), "Finite element analysis of linear and non-linear planar deformations of elastic initially curved beam", Int. J. Numer. Meth. Eng., 36, 3239-3258. https://doi.org/10.1002/nme.1620361903.
  11. Ibrahimbegovic, A. and Mejia Nava, R.A. (2021), "Heterogeneities and material-scales providing physically-based damping to replace Rayleigh damping for any structure size", Couple. Syst. Mech., 10(3), 201. https://doi.org/10.12989/csm.2021.10.3.201.
  12. Imamovic, I., Ibrahimbegovic, A., Knopf-Lenoir, C. and Mesic, E. (2015), "Plasticity-damage model parameters identification for structural connections", Couple. Syst. Mech., 4, 337-364. https://doi.org/10.12989/csm.2015.4.4.337.
  13. Imamovic, I., Ibrahimbegovic, A. and Hajdo, E. (2019), "Geometrically exact initially curved Kirchhoff's planar elasto-plastic beam", Couple. Syst. Mech., 8(6), 537-553. https://doi.org/10.12989/csm.2019.8.6.537.
  14. Imamovic, I., Ibrahimbegovic, A. and Mesic, E. (2017), "Nonlinear kinematics Reissner's beam with combined hardening/softening elastoplasticity", Comput. Struct., 189, 12-25. https://doi.org/10.1016/j.compstruc.2017.04.011.
  15. Imamovic, I., Ibrahimbegovic, A. and Mesic, E. (2018), "Coupled testing-modeling approach to ultimate state computation of steel structure with connections for statics and dynamics", Couple. Syst. Mech., 7(5), 555-581. https://doi.org/10.12989/csm.2018.7.5.555.
  16. Reissner, E. (1972), "On one-dimensional finite-strain beam theory: The plane problem", J. Appl. Math. Phys. (ZAMP), 23, 795-804. https://doi.org/10.1007/BF01602645.