Structural Engineering and Mechanics

  • 제80권4호
  • /
  • Pages.401-416
  • /
  • 2021
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Rehabilitation of reinforced concrete frames with non-seismic details using eccentric steel braces

  • Basit, Abdul (Department of Civil Engineering, University of Engineering & Technology Peshawar) ;
  • Khan, Muhammad S. (Department of Civil Engineering, University of Engineering & Technology Peshawar) ;
  • Ahmad, Naveed (Department of Civil Engineering, University of Engineering & Technology Peshawar)
  • 투고 : 2021.03.16
  • 심사 : 2021.08.11
  • 발행 : 2021.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents quasi-static cyclic loading tests of reduced scale reinforced concrete Eccentrically Steel Brace (ESB) retrofitted and bare portal frames. A hollow square steel brace was attached to the beam diagonally at a distance of LBeam/8 from the beam ends for enhancing the seismic performance of deficient frames. Results indicated promising behavior of ESB retrofitted frame opposed to the bare frames and shifted the damage mechanism from severe shear cracking and column flexural hinging to beam flexural cracking. ESB retrofitted frame also increased lateral force-displacement capacity, stiffness and hysteretic damping compared to the bare frames. The test results were also used to calibrate a nonlinear modeling technique proposed using a finite element based program. Additionally, a nonlinear dynamic acceleration time history analysis were carried out for two-story ESB retrofitted and bare frames and inter-story drift limits were identified for each structure. The study also confirms the importance of joint detailing's and its beneficial role in improving the seismic performance of frames under earthquake ground motions.

키워드

과제정보

The authors are grateful to the anonymous reviewers for their careful review of the manuscript.

참고문헌

  1. Ahmad, N., Masoudi, M. and Salawdeh, S. (2021), "Cyclic response and modelling of special moment resisting beams exhibiting fixed-end rotation", Bull. Earthq. Eng., 19, 203-240. https://doi.org/10.1007/s10518-020-00987-w.
  2. Alath, S. and Kunnath, S.K. (1995), "Modeling inelastic shear deformation in RC beam-column joints", Proceedings of the 10th Conference on Engineering Mechanics, University of Colorado Boulder, CO, USA, May.
  3. Altoontash, A. (2004), "Simulation and damage models for performance assessment of reinforced concrete beam-column joints", Department of Civil and Environment Engineering, Stanford University, Stanford, CA, USA.
  4. Arslan, M.H. and Korkma, H.H. (2007), "What is to be learned from damage and failure of reinforced concrete structures during recent earthquakes in Turkey?", Eng. Fail. Anal., 14(1), 1-22. https://doi.org/10.1016/j.engfailanal.2006.01.003.
  5. Badoux, M. and Jirsa, J.O. (1990), "Steel bracing of RC frames for seismic retrofitting", J. Struct. Eng., 116(1), 55-74. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:1(55).
  6. Basit, A., Khan, M.S. and Ahmad N. (2018), "Seismic fragility of reinforced concrete moment resisting frame structures in Pakistan", Proceedings of the 4th Conference on Sustainability in Process Industry (SPI), Peshawar, Pakistan, October.
  7. Bedon, C. and Amadio, C. (2018), "Numerical assessment of vibration control systems for multi hazard design and mitigation of glass curtain walls", J. Build. Eng., 15, 1-13. https://doi.org/10.1016/j.jobe.2017.11.004.
  8. Berry, M.P. and Eberhard, M.O. (2003), "Performance models for flexural damage in reinforced concrete columns", Research Report No. 2003/18, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, USA.
  9. Biddah, A. and Ghobarah, A. (1999), "Modelling of shear deformation and bond slip in reinforced concrete joints", Struct. Eng. Mech., 7(4), 413-432. https://doi.org/10.12989/sem.1999.7.4.413.
  10. Bush, T.D., Jones, E.A. and Jirsa, J.O. (1991), "Behavior of RC frame strengthened using structural steel bracing", J. Struct. Eng., 117(4), 1115-1126. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:4(1115).
  11. Chaulagain, H., Rodrigues, H., Spacone, E. and Varum, H. (2015), "Seismic response of current RC buildings in Kathmandu Valley", Struct. Eng. Mech., 53(4), 791-818. https://doi.org/10.12989/sem.2015.53.4.791.
  12. Elwood, K., Comartin, C., Holmes, W., Kelly, D., Lowes, L. and Moehle, J. (2010), "Program plan for the development of collapse assessment and mitigation strategies for existing reinforced concrete buildings", Grant No. (NISTGCR)-10-917-7, National Institute of Standards and Technology, Gaithersburg, MD, USA.
  13. Falconea, R., Carrabsb, F., Cerullib, R., Limaa, C. and Martinellia, E. (2019), "Seismic retrofitting of existing RC buildings: a rational selection procedure based on Genetic Algorithms", Struct., 35, 310-326. https://doi.org/10.1016/j.istruc.2019.08.006.
  14. FEMA 547 (2006), Techniques for the Seismic Rehabilitation of Existing Buildings, Federal Emergency Management Agency, Washington, DC, USA.
  15. FEMA P-695 (2008), Quantification of Building Seismic Performance Factors, Federal Emergency Management Agency, Washington, DC, USA.
  16. Fib Bulletin No. 24 (2003), Seismic Assessment and Retrofit of Reinforced Concrete Buildings, ISBN. 978-2-88394-064-2.
  17. Fib Bulletin No. 35 (2006), Retrofitting of Concrete Structures by Externally Bonded FRPS, with Emphasis on Seismic Applications, ISBN. 2006978-2-88394-075-8.
  18. Javed, M., Khan, A.N., Penna, A. and Magenes, G. (2006), "Performance of masonry structures during earthquake-2005 in Kashmir", Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, September.
  19. Kadid, A. and Yahiaoui, D. (2011), "Seismic assessment of braced RC frames", Procedia Eng., 14, 2899-2905. https://doi.org/10.1016/j.proeng.2011.07.365.
  20. Kam, W.Y. and Pampanin, S. (2011), "The seismic performance of RC buildings in the 22 February 2011 Christchurch earthquake", Struct. Concrete, 12(4), 223-233. https://doi.org/10.1002/suco.201100044.
  21. Kaplan, H., Yilmaz, S., Cetinkaya, N. and Atimtay, E. (2011), "Seismic strengthening of RC structures with exterior shear walls", Sadhana, 36(1), 17-34. https://doi.org/10.1007/s12046-011-0002-z.
  22. Kawamata, S. and Ohnuma, M. (1981), "Strengthening effect of eccentric steel braces to existing reinforced concrete frames"' Proceedings of the 2nd Seminar on Repair and Retrofit of Structures, Ann Arbor, Michigan, USA, May.
  23. Khan, M.S., Basit, A. and Ahmad, N. (2021), "A simplified model for inelastic seismic analysis of RC frame have shear hinge in beam-column joints", Struct., 29, 771-784. http://dx.doi.org/10.1016/j.istruc.2020.11.072.
  24. Kim, J. and LaFave, M. (2012), "A simplified approach to joint shear behavior prediction of RC beam-column connections", Earthq. Spectra, 28(3), 1071-1096. https://doi.org/10.1193/1.4000064.
  25. Li, Z., Albermani, F., Chan, R.W.K. and Kitipornchai, S. (2011), "Pinching hysteretic response of yielding shear panel device", Eng. Struct., 33(3), 993-1000. https://doi.org/10.1016/j.engstruct.2010.12.021.
  26. Lowes, L.N. and Altoontash, A. (2003), "Modeling reinforced-concrete beam-column joints subjected to cyclic loading", ASCE J. Struct. Eng., 129(12), 1686-1697. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1686).
  27. MacGregor, J.G. and Wight, J.K. (2005), Reinforced Concrete Mechanics and Design, Pearson Education, New Jersey, USA.
  28. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", ASCE J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
  29. Masoudi, M. and Khajevand, S. (2020), "Revisiting flexural overstrength in RC beam-and-slab floor systems for seismic design and evaluation", Bull. Earthq. Eng., 18, 5309-5341. https://doi.org/10.1007/s10518-020-00907-y.
  30. Mazzolani, F.M. (1992), "The use of steel in refurbishment", Proceedings of the 1st World Conference on Constructional Steel Design, Acapulco, Mexico. December.
  31. Mazzolani, F.M. (1996), "Strengthening options in rehabilitation by means of steel works", Proceedings of the 5th International Colloquium on Structural Stability (SSRC), Rio de Janeiro, Brazil.
  32. Mazzolani, F.M. (2008), "Innovative metal systems for seismic upgrading of RC structures", J. Constr. Steel Res., 64(7), 882-895. https://doi.org/10.1016/j.jcsr.2007.12.017.
  33. Mazzolani, F.M. and Mandara, A. (2001), "Advanced metal systems in structural rehabilitation of monumental constructions", Proceedings of the International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, April.
  34. Menegotto, M. and Pinto, P.E. (1973), "Method of analysis for cyclically loaded R.C. plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending. Symposium on the resistance and ultimate deformability of structures acted on by well defined repeated loads", International Association for Bridge and Structural Engineering, Zurich, Switzerland.
  35. Ohishi, H., Takahashi, M. and Yamazaki, Y. (1988), "A seismic strengthening design and practice of an existing reinforced concrete school building in Shizuoka city", Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo, Japan, August.
  36. Paulay, T. and Priestley, M.N.J. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley & Sons Inc, New York, USA.
  37. Priestley, M.J.N., Seible, F., Xiao, Y. and Verma, R. (1994), "Steel jacket retrofitting of reinforced concrete bridge columns for enhanced shear strength. 1: theoretical considerations and test design", ACI Struct. J., 91(4), 394-405.
  38. Rahimi, A. and Maheri, M.R. (2020), "The effects of steel X-brace retrofitting of RC frames on the seismic performance of frames and their elements", Eng. Struct., 206, 110149. https://doi.org/10.1016/j.engstruct.2019.110149.
  39. Ramberg, W. and Osgood, W.R. (1943), "Description of stress-strain curves by three parameters", Technical Note No. 902, National Advisory Committee on Aeronautics, USA.
  40. Rodriguez, M. and Park, R. (1991), "Repair and strengthening of reinforced concrete buildings for seismic resistance", Earthq. Spectra, 7(3), 439-459. https://doi.org/10.1193/1.1585636.
  41. Rodriguez, M. and Park, R. (1994), "Seismic load tests on reinforced concrete columns strengthened by jacketing", ACI Struct. J., 91(2), 150-159.
  42. Roeder, C.W., Lumpkin, E.J. and Lehman, D.E. (2011), "A balanced deign procedure for special concentrically braced frame connections", J. Constr. Steel Res., 67(11), 1760-1772. https://doi.org/10.1016/j.jcsr.2011.04.016.
  43. Shin, M. and LaFave, J.M. (2004), "Testing and modelling for cyclic joint shear deformations in RC beam-column connections", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August.
  44. Sivaselvan, M.V. and Reinhorn, A.M. (2001), "Hysteretic models for deteriorating inelastic structures", ASCE J. Eng. Mech., 126(6), 633-640. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:6(633).
  45. Sugano, S. (1982), "An overview of the state-of-the-art in seismic strengthening of existing reinforced concrete buildings in Japan", Proceedings of the 3rd Seminar on Repair and Retrofit of Structures, Ann Arbor, USA, May.
  46. Sugano, S. and Fujimura, M. (1980), "Seismic strengthening of existing reinforced concrete buildings", Proceedings of the 7th World Conference on Earthquake Engineering, Istanbul, Turkey, September.
  47. Tahamouli-Roudsari, M, Torkaman, M, Entezari, A.R., Rahimi, H. and Niazi, K.K. (2019), "Experimental investigation of strengthening reinforced concrete moment resisting frames using partially attached steel infill plate", Struct., 19, 173-183. https://doi.org/10.1016/j.istruc.2019.01.009.
  48. Tahamouli-Roudsari, M., Entezari, A., Hadidi, M.H. and Gandomian, O. (2017), "Experimental assessment of retrofitted RC frames with different steel braces", Struct., 11, 206-217. https://doi.org/10.1016/j.istruc.2017.06.003.
  49. Tahamouli-Roudsari, M., Eslamimanesh, M.B., Entezari, A.R., Noori, O. and Torkaman, M. (2018), "Experimental assessment of retrofitting RC moment resisting frames with ADAS and TADAS yielding dampers", Struct., 14, 75-87. https://doi.org/10.1016/j.istruc.2018.02.005.
  50. Tremblay, R., Bruneau, M., Nakashima, M., Prion, H.G.L., Filiatrault, A. and DeVall, R. (1996), "Seismic design of steel buildings: lessons from the 1995 Hyogo-ken Nanbu earthquake", Can. J. Civil Eng., 23(3), 757-770. https://doi.org/10.1139/l96-885.
  51. Tremblay, R., Timler, P., Bruneau, M. and Filiatrault, A. (1995), "Performance of steel structures during the January 17, 1994, Northridge earthquake", Can. J. Civil Eng., 22(2), 338-360. https://doi.org/10.1139/l95-046.
  52. Usami, H., Azuchi, T., Kamiya, Y., Kenjo, H., Suzuki, U. and Ban, H. (1988), "Seismic strengthening of existing reinforced concrete buildings in Shizuoka prefecture, Japan", Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo, Japan, August.
  53. Wyllie, L.A., Pino, J.A.D. and Cohen, J. (1991), "Seismic upgrade preserves architecture", Modern Steel Constr., 31(1), 20-23.
  54. Youseef, M. and Ghobarah, A. (2001), "Modeling of RC beam-column joints and structural walls", J. Earthq. Eng., 5(1), 93-111. https://doi.org/10.1080/13632460109350387.